Answer:
Explanation:
16093.4
.
What is the equation for work?
Work = force / distance
Work = force - distance
Work = force + distance
Work = force * distance
Answer:
Work = F X D
Explanation:
Work (J) equals Force (N) multiplied by Distance (M)
(d) Below shows a hydraulic press with a pump piston of area 4 cm2 and a ram area of
12 cm2 . IF A force of 300 N is applied on the pump piston, find:
(i)the maximum load on the ram.
(ii) the velocity ratio of the machine.
(iii) the mechanical advantage of the machine.
(iv)the efficiency of the machine.
Answer:
Explanation:
hi
Two astronomy students travel to South Dakota. One stands on Earth’s surface and enjoys some sunshine. At the same time, the other descends into a gold mine where neutrinos are detected, arriving in time to detect the creation of a new radioactive argon nucleus. Although the photon at the surface and the neutrinos in the mine arrive at the same time, they have had very different histories. Describe the differences.
Answer:
The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds
The Photon is million year old while the neutrino is just some minutes old as observed by the student .
Explanation:
Although The Photon ( sunshine from the sun's surface ) heating up the student standing on the Earth's surface and the neutrinos discovered by the other student inside the gold mine are both formed in the Sun's core.
The difference between both are
The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds
The Photon is million year old while the neutrino is just some minutes old as observed by the student .
A parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is connected in series to a 4.89 μF capacitor. This three‑capacitor combination is connected to a 15.5 V battery. Determine the charge on each capacitor.
Answer:
a. i. 35.96 μC b. i. 11.98 μC ii. 24.04 μC
Explanation:
We need to find the total capacitance of the system C.
The total capacitance of the parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is C' = 1.47 μF + 2.95 μF = 4.42 μF.
C' = 4.42 μF is in series with the 4.89 μF capacitor and for a series combination of capacitors, we have the total capacitance, C from
1/C = 1/4.42 μF + 1/4.89 μF
1/C = (4.42 μF + 4.89 μF)/(4.42 μF × 4.89 μF)
1/C = 9.31 μF/21.6138 μF²
C = 21.6138/9.31 μF
C = 2.32 μF
So, the total charge in the circuit Q = CV where C = total capacitance = 2.32 μF and v = voltage = 15.5 V
So, Q = CV
Q = 2.32 μF × 15.5 V
Q = 35.96 μC
i. The charge on the 4.89 μF capacitor
Since the 4.89 μF is in series with C', the total charge flowing i the circuit is the total charge in the 4.89 μF capacitor. So, its charge Q = 35.96 μC
b. The charge in the 1.47 μF and 2.95 μF capacitors.
To find the charge in the 4.89 μF and 2.95 μF capacitors, we need to find the voltage across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor. The voltage, V' across the 4.89 μF capacitor, since Q = CV', V' = Q/C = 35.96 μC/4.89 μF = 7.35 V
So, the voltage V" across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor, C' is V" = 15.5 V - V' (since V' + V" = 15.5 V).
So, V" = 15.5 V - V'
V" = 15.5 V - 7.35 V
V" = 8.15 V
i. The charge on the 1.47 μF capacitor
Using Q' = CV" where Q' = charge across capacitor, C = 1.47 μF and V" = 8.15 V.
So, Q' = CV"
Q' = 1.47 μF × 8.15 V
Q' = 11.98 μC
ii. The charge on the 2.95 μF capacitor
Using Q" = CV" where Q' = charge across capacitor, C = 2.95 μF and V" = 8.15 V.
So, Q" = CV"
Q" = 2.95 μF × 8.15 V
Q" = 24.04 μC
What is the relationship between electric field lines and equipotential lines that you observed in doing the lab
Answer:
Explained below
Explanation:
Generally speaking, we know in physics that Electric field lines are lines which usually start at positive charges and deflect away from them to terminate at the negative charges. Meanwhile Equipotential lines are lines that are used to connect points located on the same electric potential.
Finally, in conclusion, electric field lines are usually lines that go through in a perpendicular manner across every equipotential lines.
Pls help asap!!
A bucket contains hot water at 95°c. A man wants to bath with water at 40°c. What is the ratio of the mass of hot water to the mass of cold water that he needs.
Answer:
55
Explanation:95-40=55
i hope i did the math right if i didnt please tell me
Why is a flower not a good blackbody radiator?
Answer:
A flower emits only visible light
A flower reflects much of the light that hits it
Convertir 25 km/h a m/s
Answer:
6.9 m/s
Explanation:
1000m = 1km
3600s = 1hr
25000m/3600s
6.9m/s
Cuánto demorará un cuerpo en alcanzar su máxima altura, sabiendo que fue lanzado, verticalmente hacia arriba, con una velocidad cuyo valor fue de 90 m/s?
Answer:
The maximum height reached is 413.27 m.
Explanation:
How long will it take for a body to reach its maximum height, knowing that it was thrown, vertically upwards, with a velocity whose value was 90 m / s?
initial velocity , u = 90 m/s
gravity, g = 9.8 m/s^2
Let the maximum height is h.
At maximum height the velocity v = 0
Use third equation of motion
[tex]v^2 = u^2 - 2 gh\\\\0 = 90\times 90 - 2 \times 9.8 \times h\\\\h = 413.27 m[/tex]
Which wave has the smallest amplitude?
Answer:
C. C
Explanation:
A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.
In Science, there are two (2) types of wave and these include;
I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.
II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.
A crest can be defined as the highest (vertically) point on a waveform.
On a related note, a trough is the lowest (vertically) on a waveform.
An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest. Thus, the vertical axis (y-axis) is the amplitude of a waveform i.e it's measured vertically.
In this scenario, waveform C which is represented by a blue curvy line has the smallest amplitude in comparison with the other waveforms because it has the minimum height when measured from the origin.
In contrast, waveform A represented by a purple line has the highest amplitude because it has the maximum height when measured from the origin.
Mathematically, the amplitude of a wave is given by the formula;
x = Asin(ωt + ϕ)
Where;
x is displacement of the wave measured in meters.A is the amplitude.ω is the angular frequency measured in rad/s.t is the time period measured in seconds.ϕ is the phase angle.Answer:
The answer is indeed D as the comment above suggests.
Explanation:
Simply put, wave D's highest point is closer to the line than all of the other high points of A, B and C
Which symbol and unit of measurement are used for electric current?
symbol. A, unit: 1
symbol: C, unit: A
symbol l; unit C
symbol: 1; unitA
Answer: Symbol is I and unit A
Explanation: A represents Amperes
HOPE THIS HELPS!!!!!!!!
Kevin used a pulley to lift a piano to the third floor of his apartment. His input work was 12,000 J and the output work was 10,000 J. What was the mechanical efficiency of the pulley?
A . 50%
B. 83.3%
C . 120%
D. 16.7%
Answer:
B
Explanation:
Eff = output work/input work ×100
Hence, Eff = 10000/12000 × 100
Eff = 83.3%
Light of wavelength 530.00 nm is incident normally on a diffraction grating, and the first‑order maximum is observed to be 33.0∘ from the normal. How many slits per millimeter are marked on the grating?
Answer:
1028 slits/mm
Explanation:
We are given that
Wavelength of light, [tex]\lambda=530nm=530\times 10^{-9} m[/tex]
1nm=[tex]10^{-9} m[/tex]
[tex]\theta=33^{\circ}[/tex]
n=1
We have to find the number of slits per mm are marked on the grating.
We know that
[tex]dsin\theta=n\lambda[/tex]
Using the formula
[tex]dsin33^{\circ}=1\times 530\times 10^{-9}[/tex]
[tex]d=\frac{530\times 10^{-9}}{sin33^{\circ}}[/tex]
[tex]d=9.731\times 10^{-7} m[/tex]
1m=[tex]10^{3}mm[/tex]
[tex]d=9.731\times 10^{-7}\times 10^3[/tex]mm
[tex]d=0.0009731mm[/tex]
Number of slits=[tex]\frac{1}{d}[/tex]
Number of slits=[tex]\frac{1}{0.0009731}[/tex]/mm
Number of slits=1028/mm
Hence, 1028 slits/mm are marked on the grating.
Answer:
1027.6 lines per mm.
Explanation:
wavelength = 530 nm
order, m= 1
Angle = 33 degree
Let the slits per mm is 1/d.
So,
[tex]m \lambda = d sin A\\\\1\times 530\times 10^{-6} = d sin 33\\\\\frac{1}{d} = 1027.6 lines per mm[/tex]
A 20-N force acts on a 5-kg object at rest. How fast will
the object accelerate on a frictionless surface?
A. 15 m/s^2
B. 25 m/s^2
C. 4 m/s^2
D. 100 m/s^2
Answer:
C.
Explanation:
Force = Mass * Acceleration
So 20 = 5* Acceleration
4 = Acceleration
The acceleration of the object is 4 m/s².
To find the acceleration, the given values are:
Force = 20 N
Mass = 5 kg
Define acceleration.Definition:
As it was given as the values of Force and mass, here acceleration definition depends on the Newton's second law of motion.
Using the second law of motion, the force will be equal to the product of the mass and the acceleration.
As formula,
F = ma Newton
Here, to find acceleration,
a =f/ m
Substituting the values,
= 20 / 5
a = 4m/s².
So, the acceleration was 4 m/s². The Option C is the correct answer.
Learn more about acceleration,
https://brainly.com/question/12550364
#SPJ6
16 100 g of water at 25 °C is poured into an insulating cup. 50 g of ice at 0 °C is added to the water.
The water is stirred until the temperature of the water has fallen to 0°C.
18 g of ice remains unmelted.
The specific heat capacity of water is 4.2 J /g °C.
Which value does this experiment give for the specific latent heat of fusion of ice?
Answer:
Q = Q
mcT = ml
100 x 4.2 x 25 = (50-18) l
l = 328
*Hope it helps*
The specific latent heat of fusion of the melted ice is 328.13 J/kg.
Conservation of energy
The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;
Heat lost by the water = Heat gained by the ice
McΔθ = mL
where;
c is specific heat capacity of waterL is pecific latent heat of fusion of icem is mass of melted ice = 50 g - 18 g = 32 g(100)(4.2)(25) = (32)L
32L = 10500
L = 328.13 J/kg
Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.
Learn more about heat capacity here: https://brainly.com/question/16559442
what do you mean by supplementary quantities and its unit?
$ \large\boxed{ \sf \red{More ~Info :}}$
The units of supplementary quantities are dimensionless units.
[tex] \\ [/tex]
What is the difference between heat capacity and specific heat capacity? I want the meaning please.
Answer:
The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.
I hope it helps
A convex mirror of radius of curvature 1.6 m has an object placed at a distance of 1.0 m from it. Find the position of image and the magnification.
Answer:
The image is formed at 0.44 m in front of the mirror
magnification (M) = 0.44
Explanation:
Applying, mirror formular
1/f = (1/u)+(1/v).................... Equation 1
Where f = Focal length of the convex mirror, u = object distance, v = image distance.
Using the real is positive convection,
From the question,
Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m
Substitute these values into equation 1
-1/0.8 = (1/v)+(1/1)
Solve for v
1/v = 1.25+1
1/v = 2.25
v = 1/2.25
v = 0.44 m
Hence the image is formed at 0.44 m in front of the mirror
Magnification (M) = v/u
m = 0.44/1
m = 0.44
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
why physics ought to be studied?
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
Describe the advantages and disadvantage is of living in a floodplain
Answer:
:) :::::::::::::::::::::::::::::::))))
Magnetic force between the north poles of two magnets is
Magnetic force between the north poles of two magnets is REPULSIVE
Answer:Repulsion or attraction
Explanation:The angle between the compass needle and geographic north is called the MAGNETIC DECLINATION.(see earth:the magnetic field of the earth ). The repulsion or attraction between two magnetic dipoles can be viewed as the interaction of one dipole with the magnetic field produced by other dipole.
I have possess'd your grace of what I purpose:And by our holy Sabbath have I swornTo have the due and forfeit of my bond.If you deny it, let the danger lightUpon your charter and your city's freedom !You'll ask me, why I rather choose to haveA weight of carrion flesh than to receiveThree thousand ducats : I'll not answer that:But, say, it is my humour(1) Whom are these lines addressed to? What is the context in which theselines are spoken?(ii) What has Shylock sworn on oath ?
Answer:
1. These lines are addressed to Duke.
2. These lines show that Shylock is not willing to forgive the debt a merchant owes him, nor is he willing to justify why he demands that debt be paid, even if it seems cruel.
3. He swore by the Holy Sabbath, which is a holy day for him, who is a Jew. He swore he would get the debt money or a piece of the debtor's flesh.
Explanation:
The lines shown in the question above refer to "The Merchant of Venice" written by Shakespeare. In this story we are introduced to Antonio, a commercial who is very prejudiced against Jews, but when he needs money, he borrows from another merchant, Shylock, who is Jewish. Shylock agrees to lend money to Antonio, but determines the date that this money must be returned, in addition, Shylock states that he will lend the money if Antonio agrees that if this money is not paid by the specified date, Antonio will have to pay with half a kilo of flesh from his own body. Antonio agrees, but doesn't pay the money so Shylock goes after the flesh of Antonio's body and Duke tries to intervene because he thinks this is too cruel. At this point, Shylock speaks the lines shown in the question above, showing that he is not willing to change his mind.
health ,population and environment education is for the enrichment of quality of life,justify the statement
Answer:
hey !! here is a short and sweet answer to your question
=quality of life is directly determined by health ,education ,and life expectacy
=health Is a type of thing that gives employment to the person working in firm
hope u understand
Explanation:
If we go on the top of the Mountain we will our weight increase or decrease?
Answer:
increase
Explanation:
guesshejwoowsnnsnakalalapqjhdjd
Answer:
our weight would decrease.
Explanation:
because of you burning all those calories and fat from hiking up the mountain.
List out the fundamental and derived units
An unbalanced 6.0-newton force acts eastward on an object for 3.0 seconds. The impulse
produced by the force is
18 N:s east
2 Nós east
18 N:s west
2 Nis west
Compared with dim light, what do light waves that look bright tend to have the subject just says science but the picker doesn't have that
Answer:
The brightness of a light depends on the amplitude of the light wave, which is the extent the waves moves from their equilibrium position. The brightness is also related to the amount of light that is emitted or reflected by an object
Therefore, compared to dim light, light that look bright have a higher amplitude and emit or reflect more light energy (photons)
Explanation:
