There are 7.68 × 1025 atoms of phosphorous in how many moles of diphosphorous pentoxide?
Answer:
7.68 x 1025 atoms of phosphorous correspond to 1.06 mole of diphosphorous pentoxide. This can also be written as 1.06 mol of P2O5.
Part 1. A lightly inflated balloon is placed in a freezer. Explain the change to the size of the balloon based on the kinetic molecular theory.
Part 2. What would most likely happen to the balloon if it was instead kept outside in the sun for some time? Explain your answer based on the kinetic molecular theory.
In both cases, assume the balloon is tied tight enough so that air does not escape.
Part 1: When a lightly inflated balloon is placed in a freezer, the temperature of the air molecules inside the balloon decreases. According to the kinetic molecular theory, the volume of a gas is directly proportional to its temperature. As the temperature of the air molecules inside the balloon decreases, the average kinetic energy of the air molecules also decreases, causing the gas to contract. This contraction leads to a decrease in the volume of the gas inside the balloon, which causes the balloon to shrink in size.
Part 2: If the balloon is instead kept outside in the sun for some time, the temperature of the air molecules inside the balloon will increase. According to the kinetic molecular theory, an increase in temperature leads to an increase in the average kinetic energy of the gas molecules, causing them to move faster and collide more frequently. This increased collision frequency leads to an increase in pressure, which causes the balloon to expand in size. Therefore, the balloon will most likely get bigger when it is exposed to the heat of the sun.
Answer:
simple answer
Explanation:
part 1: if the balloon's temperature decreases so does the air molecules within it. The gas contracts because it's in a seal place, causing the balloon to shrink.
part 2: the balloon is exposed to heat, so the temperature is obviously going to increase as well as the air molecules. Gas molecules are moving rapidly causing the balloon to expand.
The titration of 45.0 ml of an unknown triprotic acid required 32.71 ml of 0.37 M KOH to
reach the endpoint. What is the molarity of the unknown acid?
The molarity of the unknown triprotic acid is 0.269M.
How to calculate molarity?Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.
The molarity of the unknown acid can be calculated using the following formula:
CaVa = CbVb
Where;
Ca and Va = acid concentration and volume respectivelyCb and Vb = base concentration and volume respectivelyAccording to this question, the titration of 45.0 ml of an unknown triprotic acid required 32.71 ml of 0.37 M KOH to reach the endpoint.
45 × Ca = 32.71 × 0.37
45Ca = 12.1027
Ca = 0.269M
Learn more about molarity at: https://brainly.com/question/8732513
#SPJ1
Predict the principal organic product of the following reaction. Specify stereochemistry where appropriate.
The major organic product of an SN2 substitution reaction is an alkene, which may be either in retention or inversion of configuration relative to the original substrate.
The reaction you are asking about is an SN2 substitution reaction, in which a nucleophile (Nu) displaces a leaving group (LG) from a molecule with an alkyl halide substrate. The major organic product of this reaction will be an alkene, which has the same carbon chain as the alkyl halide substrate. Depending on the relative configuration of the substrate, the alkene product may be the same as the original substrate (retention) or have its configuration inverted (inversion). If stereochemistry is relevant to the question, then it should be specified in the answer.
To learn more about SN2 substitution :
https://brainly.com/question/29849583
#SPJ11
which the following optically active alcohol is treated with hbr, a racemic mixture of alkyl bromides is obtained
(S)-2-butanol will undergo an SN2 reaction with HBr to produce a racemic mixture of alkyl bromides. Here option B is the correct answer.
When optically active alcohol is treated with HBr, the reaction follows an SN1 or SN2 mechanism. In the case of SN1, a carbocation intermediate is formed, and in SN2, a backside attack by the nucleophile occurs. The stereochemistry of the product depends on the configuration of the intermediate and the direction of attack.
In the case of (S)-2-butanol, the hydroxyl group is attached to the second carbon atom, which makes it a primary alcohol. When treated with HBr, it undergoes an SN2 reaction, where the hydroxyl group is replaced by the bromine atom. The nucleophile attacks from the backside of the molecule, leading to an inversion of configuration.
This results in the formation of a racemic mixture of alkyl bromides, as both enantiomers have an equal chance of being attacked from either side. On the other hand, (R)-2-butanol, being the enantiomer of (S)-2-butanol, will also undergo the same reaction and produce the same racemic mixture of alkyl bromides.
In the case of (R)-1-phenyl ethanol and (S)-1-phenyl ethanol, they are secondary alcohols and can undergo either SN1 or SN2 reactions depending on the reaction conditions. However, the reaction mechanism will lead to the formation of a mixture of diastereomers, rather than a racemic mixture of enantiomers.
To learn more about alkyl bromides
https://brainly.com/question/29031148
#SPJ4
Complete question:
Which of the following optically active alcohols, when treated with HBr, results in a racemic mixture of alkyl bromides?
a) (R)-2-butanol
b) (S)-2-butanol
c) (R)-1-phenyl ethanol
d) (S)-1-phenyl ethanol
Please help me. Thank you
The standard change in Gibbs energy at 25 degree Celsius is 490.6 °C. for given equilibrium partial pressure .
What is Gibbs energy ?The Gibbs energy is the thermodynamic potential that is minimized when a system reaches chemical equilibrium at constant pressure and temperature when not driven by an applied electrolytic voltage. Its derivative with respect to the reaction coordinate of the system then vanishes at the equilibrium point.
Using the formula
ΔG° = - R × T ln K
WHERE R= 8.3144598 J⋅mol⁻¹⋅K⁻¹.
T = 298 K
K = 0.82
SOLVING ,
The standard change in Gibbs energy at 25 degree Celsius is 490.6 °C.
To know more about Gibbs energy , visit ;
brainly.com/question/20358734
#SPJ1
A 0.036 M aqueous nitrous acid (HNO2) solution has an osmotic pressure of 0.93 atm at 25°C. Calculate the percent ionization of the acid.
The percent ionization of the nitrous acid in the 0.036 M aqueous solution is 2.1%.
How to calculate the percent ionization of the acid ?
The osmotic pressure (π) of a solution can be related to the molar concentration (M) of the solute and the temperature (T) of the solution by the following equation:
π = MRT
Where R is the gas constant.
We can use this equation to calculate the molar concentration of the nitrous acid solution:
M = π / RT
M = (0.93 atm) / (0.0821 L·atm/(mol·K) x 298 K)
M = 0.036 M
This is the molar concentration of the undissociated nitrous acid in the solution. To calculate the percent ionization of the acid, we need to know the concentration of the H+ and NO2- ions in the solution.
The balanced chemical equation for the dissociation of nitrous acid is:
HNO2(aq) ⇌ H+(aq) + NO2-(aq)
Let x be the extent of ionization of the nitrous acid. Then the concentration of H+ and NO2- ions can be expressed in terms of x as follows:
[H+] = x M
[NO2-] = x M
The concentration of the undissociated nitrous acid is (1-x)M.
The expression for the equilibrium constant (Ka) of the reaction can be written as:
Ka = [H+] [NO2-] / [HNO2]
Substituting the concentrations in terms of x, we get:
Ka = x^2M / (1-x)M
Simplifying the above equation, we get:
Ka = x^2 / (1-x)
The percent ionization of the acid is the fraction of the original HNO2 molecules that dissociate into H+ and NO2- ions. It can be calculated as follows:
% ionization = (concentration of H+ ions) / (initial concentration of HNO2) x 100
% ionization = (x M) / (M) x 100
% ionization = x x 100
Substituting the value of x from the above equation for Ka, we get:
Ka = x^2 / (1-x)
x = sqrt(Ka / (1+Ka))
We can calculate the value of Ka using the standard reference value of the acid dissociation constant (Ka) for nitrous acid at 25°C, which is 4.5 x 10^-4.
x = sqrt(4.5 x 10^-4 / (1+4.5 x 10^-4))
x = 0.021
% ionization = 0.021 x 100
% ionization = 2.1%
Therefore, the percent ionization of the nitrous acid in the 0.036 M aqueous solution is 2.1%.
Learn more about osmotic pressure here : brainly.com/question/25413362
#SPJ1
AsH3, HBr, KH, H2Se arrange in increasing order of acid strength
Answer:
Transcribed Image Text: Rank the following substances in order of increasing acid strength. (1 as least and 4 as most in acid strength) ✓ H₂Se ✓ HBr HI ✓ AsH3 Expert Solution
Explanation:
HOPE IT HELPS!!
write a balanced equation for the redox reaction between calcium metal and oxygen gas
a balanced equation for the redox reaction: 2 Ca(s) + O2(g) → 2 CaO(s)
What is a redox reaction?A redox reaction is a type of chemical reaction that involves the transfer of electrons between species. One species undergoes oxidation (loses electrons) while another species undergoes reduction (gains electrons).
Which species is being oxidized and which species is being reduced in the reaction between calcium metal and oxygen gas?In the reaction between calcium metal and oxygen gas, the calcium metal is being oxidized (loses electrons) and the oxygen gas is being reduced (gains electrons). This can be seen in the balanced equation where the calcium atoms go from having an oxidation state of 0 to +2, while the oxygen atoms go from having an oxidation state of 0 to -2.
Learn more about redox reaction here:
https://brainly.com/question/13293425
#SPJ1
A student sets up a titration with a * 1 point buret filled with 0.5 M NaOH. In the flask below they place the phenolphthalein indicator and 6.2 mL of the unknown acid. The solution in the beaker turns pink after exactly 24.8 mL of NaOH have been added. Find the exact concentration of the unknown acid.
FILL IN THE BLANK. Use the Gizmo to find the freezing, melting, and boiling points of water at 5,000 meters (16,404 feet). Write these values below. Freezing point: _______ Melting point: _______ Boiling point: _______
If we use the Gizmo to find the freezing, melting, and boiling points of water at 5,000 meters (16,404 feet) then,
Freezing point: 32 ºF (0ºC)
Melting point: 32 ºF (0ºC)
Boiling point: 203°F (95°C)
The freezing point is defined as the temperature at which a liquid becomes a solid. Increased pressure usually raises the freezing point with the melting point of the solid. The boiling point of a pure substance is defined as the temperature at which the substance transitions from a liquid to the gaseous phase. At the boiling point the vapor pressure of the liquid is equal to the applied pressure on the liquid. The melting point of a substance is defined as the temperature at which the substance changes from a solid to a liquid.
Melting occurs at a single temperature for the pure substances. The normal and average melting point and boiling point of water at 1 atmospheric pressure are 0°C and 100°C respectively. Decreasing the pressure under 1 atm. will lower the boiling point since the external pressure will be lower so it will become equal with the vapor pressure at a lower temperature.
To learn more about Freezing point
https://brainly.com/question/40140
#SPJ4
Calculate the buffer ratio (base/acid) required for a buffer of pH = 5.68 that is prepared by mixing sodium hydrogen oxalate and sodium oxalate. A table of pKa values can be found here. Report your answer to 2 significant figures in scientific notation. Calculate the pH (to two decimal places) of the buffer solution after the addition of 7.77 g of sodium hydrogen carbonate (NaHOCOO) to the buffer solution above. Assume 5% approximation is valid and that the volume of solution does not change.
122.5 grams of oxalic add dihydrate (MW = 126.07 g/mole) and disodium oxalate (MW = 133.99 g/mole) were required to prepare this buffer if the total oxalate concentration is 0.115 M.
Weak acids are defined as acids that don't completely dissociate in solution. It can be explained as any acid that is not a strong acid. The strength of a weak acid depends on how much it gets dissociates and the more it dissociates, the stronger the acid. The mass of the weak acid in a solution of a certain pH can be determined by calculating the original concentration of the acid after calculating the concentration of the hydrogen ions with the help of the pH value of the solution.
The Concentration of oxalate ion is 0.115 M.
pKa1 is 1.250.
pKa2 is 4.266.
pH is 5.193.
Molarity = (mass / molar mass) / 1 / volume in liter
The molar mass is 126.07g/mole.
Mass = Molarity × molar mass × Volume in liter
Mass=0.972 M × 126.07 g/mole × 1.00 L
= 122.5 gram
To learn more about concentration
https://brainly.com/question/17206790
#SPJ4
The complete question is,
A buffer prepared by dissolving oxalic add dihydrate (H2C2O4⋅2H2O) and disodium oxalate (Na2C2O4) in 1.00 L of water has a pH of 5.193. How many grams of oxalic add dihydrate (MW = 126.07 g/mole) and disodium oxalate (MW = 133.99 g/mole) were required to prepare this buffer if the total oxalate concentration is 0.115 M? Oxalic acid has pKa values of 1.250 (pKa1) and 4.266 (pKa2).
How many calories are required to raise the temperature of a 35.0 g sample from 35 °C to 85 °C? The sample has a specific heat of 0.108 cal/g °C.
Answer:
First, we need to calculate the change in temperature:
ΔT = final temperature - initial temperature
ΔT = 85 °C - 35 °C
ΔT = 50 °C
Next, we can use the following formula to calculate the heat energy required:
Q = m·C·ΔT
where Q is the heat energy in calories, m is the mass of the sample in grams, C is the specific heat in cal/g °C, and ΔT is the change in temperature in °C.
Plugging in the given values, we get:
Q = 35.0 g · 0.108 cal/g °C · 50 °C
Q = 189.0 calories
Therefore, 189.0 calories are required to raise the temperature of the sample from 35 °C to 85 °C
2. Assume
60.0 mL
of a
2.5M
potassium chromate solution is mixed with
40.0 mL
of a
3.2M
solution of iron (III) chloride. a) Will a reaction occur and if so, what reaction will occur? b) How much precipitate will be produced in grams? c) What is the concentration of each spectator ion in the final solution? What is the concentration of left-over ions in the solution? (Calculate the final concentration of each ion).
Previous qu
The displacement reaction will occur. The concentration of each spectator ion in the final solution is 3/2 moles of Fe2(CrO4)3 will be formed and Concentration of CrO4^2- will be 0.033 M
Step 1:
The balanced chemical equation for the reaction is given below:
K2CrO4 + FeCl3 -> Fe2(CrO4)3 + 2KCl
Hence, the reaction occurs between potassium chromate and iron (III) chloride.
Step 2:
We need to find out how much precipitate will be produced in grams.
Let's calculate the moles of reactants and then use mole ratio to find out the limiting reagent:
[tex]\[\text{Moles of potassium chromate} = \text{Molarity} \times \text{Volume} \div 1000\][Molarity of K2CrO4 = 2.5 M; Volume of K2CrO4 = 60.0 mL][/tex]
Moles of K2CrO4 = (2.5 x 60.0) / 1000 = 0.150 mol
[tex]\[\text{Moles of iron (III) chloride} = \text{Molarity} \times \text{Volume} \div 1000\][Molarity of FeCl3 = 3.2 M[/tex] = 3.2 M;
Volume of FeCl3 = 40.0 mL]Moles of FeCl3 = (3.2 x 40.0) / 1000 = 0.128 mol
As we see, K2CrO4 is the limiting reagent. So, FeCl3 is in excess.
Therefore, amount of Fe2(CrO4)3 precipitated is given by moles of K2CrO4 and mole ratio:
[tex]\[\text{Moles of Fe2(CrO4)3} = \text{Moles of K2CrO4} = 0.150 mol\][/tex]
Now, we will find the molecular weight of Fe2(CrO4)3 as 479.87 g/mol.
[tex]\[\text{Mass of Fe2(CrO4)3} = \text{Moles of Fe2(CrO4)3} \times \text{Molecular weight}\][/tex]
[tex]\[\text{Mass of Fe2(CrO4)3} = 0.150 \times 479.87 = 71.98\][/tex]
Therefore, the amount of precipitate produced is 71.98 g.c
We need to find out the concentration of each spectator ion in the final solution.
Firstly, we can write down the ionic equation for the reaction:
[tex]2 K+ + CrO4^2- + 3 Fe^3+ + 3 Cl^- - > 2 K+ + 3 Cl^- + Fe2(CrO4)3[/tex]
Now, we will check which ions remain in the final solution. We see that potassium and chloride ions are spectator ions. Hence, we don't need to calculate their concentration. The concentration of remaining ions can be calculated as follows:Fe3+ ions: In the given reaction, 3 moles of FeCl3 reacts with 2 moles of K2CrO4.
Hence, 3/2 moles of Fe2(CrO4)3 will be formed.
Therefore,
= [tex]\frac{3/2 \times 3.2 \times 40.0 \div 1000}{60.0 + 40.0}[/tex]
= 0.034 M\]CrO42- ions:
In the given reaction, 2 moles of K2CrO4 reacts with 3 moles of FeCl3.
Hence, 2/3 moles of Fe2(CrO4)3 will be formed.
Therefore,
Concentration{ of CrO4^2-}
= [tex]\frac{2/3 \times 2.5 \times 60.0 \div 1000}{60.0 + 40.0}[/tex]
= 0.033 M\]
For more such questions on displacement reaction , Visit:
https://brainly.com/question/20690229
#SPJ11
A 106 mL solution of a dilute acid is added to 157 mL of a base solution in a coffee-cup calorimeter. The temperature of the solution increases from 22.94 oC to 27.29 oC. Assuming the mixture has the same specific heat (4.184J/goC) and density (1.00 g/cm3) as water, calculate the heat (in J) transferred to the surroundings, qsurr.
Answer:
4897 J
Explanation:
The heat transferred to the surroundings, q_surr, can be calculated using the equation:
q_surr = -q_rxn = -CmΔT
where C is the specific heat capacity of the mixture (assumed to be the same as water, 4.184 J/g°C), m is the mass of the mixture (which we can calculate using the density, assuming that the volumes are additive), and ΔT is the change in temperature (in Celsius).
First, let's calculate the mass of the mixture:
density of water = 1.00 g/cm^3
volume of mixture = volume of acid + volume of base = 106 mL + 157 mL = 263 mL = 0.263 L
mass of mixture = density of water x volume of mixture = 1.00 g/cm^3 x 0.263 L = 263 g
Next, let's calculate the change in temperature:
ΔT = final temperature - initial temperature = 27.29°C - 22.94°C = 4.35°C
Now we can calculate the heat transferred to the surroundings:
q_surr = -CmΔT
q_surr = -(4.184 J/g°C) x (263 g) x (4.35°C)
q_surr = -4897 J
Note that the negative sign indicates that heat is lost by the system to the surroundings. Therefore, the heat transferred to the surroundings, q_surr, is 4897 J.
1) what is the empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29% oxygen? worksheet
The empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29% oxygen is CH2O.
To calculate this, you need to first convert the percentage composition into mass composition. This is done by multiplying the percentages by the molecular weight of each element.
Carbon: 65.5% x 12 g/mol = 0.786 g/mol
Hydrogen: 5.5% x 1 g/mol = 0.055 g/mol
Oxygen: 29% x 16 g/mol = 0.464 g/mol
Now that you have the mass composition, you can calculate the moles of each element by dividing the mass of each element by its molar mass.
Carbon: 0.786 g/mol / 12 g/mol = 0.065 mol
Hydrogen: 0.055 g/mol / 1 g/mol = 0.055 mol
Oxygen: 0.464 g/mol / 16 g/mol = 0.029 mol
Finally, divide each element's moles by the smallest moles to get the empirical formula.
Carbon: 0.065 mol / 0.029 mol = 2.24 = 2 mol
Hydrogen: 0.055 mol / 0.029 mol = 1.90 = 1 mol
Oxygen: 0.029 mol / 0.029 mol = 1.00 = 1 mol
Therefore, the empirical formula of the molecule is CH2O.
For more such questions on empirical formula , Visit:
https://brainly.com/question/1603500
#SPJ11
How many atoms of lithium are in 18.7 g?
The atoms of lithium that are in 18.7 g is 16 × 10²³ atoms . This is taken out by mole concept .
What is mole concept ?The mole is a unit of measurement similar to the pair, dozen, gross, and so on. It provides a precise count of the atoms or molecules in a bulk sample of matter. A mole is the amount of substance that contains the same number of discrete entities (atoms, molecules, ions, etc.)
if 7 grams of lithium contain 6 × 10²³ atoms
then 18.7 will contain 16 × 10²³ atoms
to know more about mole concept , visit ;
brainly.com/question/31123980
#SPJ1
what happens when zinc chloride reacts with potassium hydroxide and what formed?
Answer:
when the solution of potassium hydroxide and zinc chloride are mixed,the double-displacement reaction occur ,resulting in precipitation and the reaction forms potassium chloride and zinc hydroxide .
Which statement below correctly describes their relative atomic radii and first ionization energy when comparing Se and Br? The atomic radius for Se is larger than Br, and the first ionization energy for Se is greater than Br. The atomic radius for Br is larger than Se, and the first ionization energy for Bris greater than Se. The atomic radius for Se is larger than Br, and the first ionization energy for Br is greater than Se. The atomic radius for Br is larger than Se, and the first ionization energy for Se is greater than Br.
At has a higher initial ionisation energy than Br, while Br has a bigger atomic radius. Se has a bigger atomic radius than Br, and Br has a higher initial ionisation energy than Se.
How do atomic radii and ionisation energy relate to one another (i.e., what happens to ionisation energy as atomic radii grow)?The most loosely bound electron is further from the nucleus and thus easier to remove in bigger atoms. Hence, the ionisation energy should decrease as size (atomic radius) increases.
Why does ionisation energy rise across a period while decreasing down a group?This is because the outer electrons aren't bound as strongly because they are farther from the nucleus.
To know more about ionisation energy visit:-
brainly.com/question/27356170
#SPJ1
Chemistry Help Please! It's worth a lot of points
1.Write the equilibrium expression for the following reactions
a. H2SO4(aq) + H2O(L) ⇆ HSO4-(aq) + H3O+(aq)
b. 4NH3(g) + 5O2(g) ⇆ 4NO(g) + 6H2O(g)
c. NH4Cl(s) ⇆ NH3(g) + HCl(g)
d. N2O4(g) ⇆ 2NO2(g)
2. The following reaction has a K value of 0.050. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
N2(g) + 3H2(g) ⇆ 2NH3(g)
3. The following reaction has a K value of 6.8 x 103. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
2SO3(g) ⇆ 2SO2(g) + O2(g)
4. When dissolving substances in water, the degree of solubility of a substance is often represented as the solubility product constant (Ksp). The solubility product constant is the same thing as the equilibrium constant for the dissolving reaction. Two substances that dissociate in water are shown below alone with the Ksp.
NaCl(s) ⇆ Na+(aq) + Cl-(aq) Ksp = 36
BaSO4(s) ⇆ Ba2+(aq) + SO42-(aq) Ksp = 1.1 x 10-16
5. Identify and label the Brønsted-Lowry acid, its conjugate base, the Brønsted-Lowry base, and its conjugate acid in each of the following equations:
a. HNO3 + H2O ⟶ H3O+ + NO3−
b. CN− + H2O ⟶ HCN + OH−
c. H2SO4 + Cl− ⟶ HCl + HSO4−
d. HSO4− + OH− ⟶ SO42− + H2O
e. O2− + H2O ⟶2OH−
6. What is the conjugate acid of each of the following? What is the conjugate base of each of the following?
a. OH-
b. H2O
c. HCO3-
d. NH3
e. HSO4-
7. The following acids are shown with their equilibrium constants (also known as the acid dissociation constant). Rank these acids from strongest to weakest. Explain your ranking.
HCN(aq) + H2O(L) ⇆ H3O+(aq) + CN-(aq) K = 6.2 x 10-10
HC2H3O2(aq) + H2O(L) ⇆ H3O+(aq) + C2H3O-(aq) K = 1.75 x 10-5
H2CO3(aq) + H2O(L) ⇆ H3O+(aq) + HCO3-(aq) K = 4.5 x 10-7
HIO4(aq) + H2O(L) ⇆ H3O+(aq) + IO4-(aq) K = 2.3 x 10-2
8. Calculate the pH and the pOH of each of the following solutions.
a. 0.200 M HCl
b. 0.0143 M NaOH
c. 3.0 M HNO3
d. 0.0031 M Ca(OH)2
9. Wine has a pH of 3.6. What are the hydronium and hydroxide ion concentrations?
10. The hydroxide ion concentration in household ammonia is 3.2 x 10-3 M. What is the concentration of hydronium ions?
Answer:
1. Equilibrium expressions:
a. K = [HSO4-][H3O+]/[H2SO4][H2O]
b. K = [NO]^4[H2O]^6/[NH3]^4[O2]^5
c. K = [NH3][HCl]/[NH4Cl]
d. K = [NO2]^2/[N2O4]
2. Since K = 0.050, the concentrations of the reactants (N2 and H2) are larger than the concentrations of the products (NH3).
3. Since K = 6.8 x 10^3, the concentrations of the products (SO2 and O2) are larger than the concentrations of the reactant (SO3).
4. The Ksp expression for each of the reactions is:
a. Ksp = [Na+][Cl-]
b. Ksp = [Ba2+][SO42-]
5. Brønsted-Lowry acids and bases:
a. Acid: HNO3; Conjugate base: NO3-; Base: H2O; Conjugate acid: H3O+
b. Acid: HCN; Conjugate base: CN-; Base: H2O; Conjugate acid: HCN
c. Acid: H2SO4; Conjugate base: HSO4-; Base: Cl-; Conjugate acid: HCl
d. Acid: NH3; Conjugate base: NH2-; Base: H2O; Conjugate acid: NH4+
e. Acid: H2O; Conjugate base: OH-; Base: O2-; Conjugate acid: OH-
6. Conjugate acids and bases:
a. Acid: H2O; Conjugate base: OH-
b. Acid: H3O+; Conjugate base: H2O
c. Acid: H2CO3; Conjugate base: HCO3-
d. Acid: NH4+; Conjugate base: NH3
e. Acid: HSO4-; Conjugate base: SO42-
7. The strongest acid is HIO4 (highest K value), followed by HCN, HC2H3O2, and H2CO3 (lowest K value). The K values represent the degree to which the acids dissociate in solution. HIO4 is a strong acid, meaning it dissociates almost completely in solution, while H2CO3 is a weak acid, meaning it only dissociates partially.
8. pH and pOH calculations:
a. pH = -log[H3O+] = -log(0.200) = 0.699; pOH = -log[OH-] = -log(1.0 x 10^-14/0.200) = 12.301
b. pOH = -log[OH-] = -log(0.0143) = 1.844; pH = 14.000 - pOH = 12.156
c. pH = -log[H3O+] = -log(3.0) = 0.522; pOH = 13.478
d. pOH = -log[OH-] = -log(0.0062) = 2.206; pH = 14.000 - pOH = 11.794
9. Hydronium and hydroxide ion concentrations:
pH = 3.6; hydronium ion concentration = 10^-pH = 3.98 x 10^-4 M; hydro
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
Which transition metal can form both a high and low spin complex? Zn2+, Cu2+, Mn3+, Ti2+
Answer: Manganese
Explanation:
With titanium, it only has two d electrons, so it can't form different high and low spin complexes. It doesn't matter because it will never fill the higher-energy orbitals. The total spin state turns out to be +1 (two unpaired d electrons, no matter what). Therefore, manganese will form both a high and low spin complex.
It is advantageous for a predator to prey exclusively on a single prey species
Answer: It is not necessarily advantageous for a predator to prey exclusively on a single prey species, as this can limit their options and make them vulnerable if the population of that prey species declines or becomes extinct. Predators that are more flexible and able to switch between different prey species may be better equipped to survive and thrive in changing environments.
However, there are some advantages to specializing in a single prey species. For example, a predator that is well adapted to hunting a particular prey species may be more efficient and successful at capturing and consuming that prey, which could provide a reliable source of energy. Additionally, if the predator and prey have co-evolved, the predator may have adaptations that specifically allow it to exploit the weaknesses or vulnerabilities of its prey, giving it an advantage over predators that are less specialized.
What is the amount of pi?
However, it is commonly approximated as 3.14159.
What is an irrational number ?An irrational number is a number that cannot be expressed as a simple fraction or ratio of two integers. It is a non-repeating, non-terminating decimal. Examples of irrational numbers include pi (π), the square root of 2 (√2), and the golden ratio (∅).
What is a termination ?In mathematics, a terminating decimal is a decimal number that has a finite number of digits after the decimal point, i.e., the decimal representation ends in a finite number of zeroes. For example, 0.75, 2.0, and 0.0625 are terminating decimals.
To know more about irrational visit :
https://brainly.com/question/15837135
#SPJ1
What is the bond angle of carbonothioyl dibromide
Also what is the molecular shape
Answer:
Carbonothioyl dibromide, also known as CBr2S, has a bond angle of approximately 109.5 degrees, which is the typical tetrahedral bond angle for molecules with sp3 hybridization.
The molecular shape of CBr2S is also tetrahedral, with the two bromine atoms and the sulfur atom arranged at the corners of a tetrahedron, and the carbon atom at the center.
Given that 4 NH3 + 5 O2 → 4 NO + 6 H2O, if 3.00 mol NH3 were made to react with excess of oxygen gas, the amount of H2O formed would be
For Mn3+, write an equation that shows how the cation acts as an acid. express your answer as a chemical equation including phases.
Mn3+, an ion of manganese(III), can function as an acid by giving a proton (H+) to a base. Here's an illustration: Mn3+ (aq) + 3OH- (aq) Mn(OH)3 (s)
What colour are Mn2+ and MnO4?There is no need to add an indicator because MnO4's vivid purple colour serves as one enough. In the conical flask, there is Fe2+. The Fe2+ solution is added, and the Fe2+ lowers the MnO4- to Mn2+. As Mn2+ is a colourless solution, the purple colour disappears.
What is the ion Mn2name? +'sThe divalent metal cation manganese(2+) contains manganese as the metal. It plays the part of a cofactor. It consists of a monoatomic dication, a manganese cation, and a divalent metal cation.
To know more about cation visit:-
https://brainly.com/question/28710898
#SPJ1
Write the electronic configuration and draw the orbital diagram for the element: lead (Z=82) State if it is diamagnetic/paramagnetic. Please decide the diamagnetic/paramagnetic property based on the orbital diagram only! (It is okay to use the noble gas in square brackets here)
Answer:
See below.
Explanation:
The atomic number of lead (Pb) is 82, which means it has 82 electrons. The electronic configuration of lead is
1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p²
The orbital diagram for the valence electrons of lead (Pb) is
↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓
s s p p p p d d
2 1 6 2 6 2 10 10
|||||||||
1 2 3 4 5 6 7 8
The notation ↑↓ represents a pair of electrons with opposite spins.
To determine if lead (Pb) is diamagnetic or paramagnetic, we need to look at whether there are any unpaired electrons. Based on the orbital diagram, we can see that all the electrons in the valence shell are paired, meaning that lead (Pb) is diamagnetic.
Which equation is a correctly written thermochemical equation?
OC3H8 (g) +502 (g) → 3CO2 (g) + 4H₂O (1), AH= -2,220 kJ/mol
OFe (s) + O2 (g) → Fe₂O3 (s), AH= -3,926 kJ
ONH₂Cl → NH₂ + + Cl
O2C8H18 + 250216CO2 + 18H₂O, AH=-5,471 kJ/mol
Answer:
The correctly written thermochemical equation is:
C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (l), ΔH = -2,220 kJ/mol
This equation represents the combustion of propane (C3H8) in the presence of oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), with a heat release of -2,220 kJ/mol. The state symbols (g) for gases and (l) for liquids indicate the physical state of each substance at standard conditions.
Explanation:
ABOVE
how many elements are found in the formula 3He2O4PH
There are four (4) elements in the chemical formula given above.
What is a chemical formula?Chemical formula in chemistry is a notation indicating the number of atoms of each element present in a compound.
The chemical formula of a substance shows the types and number of elements present in such substance.
According to this question, the chemical formula of a substance is given. The elements present in the compound based on their symbols are as follows:
Helium (He)Oxygen (O)Phosphorus (P)Hydrogen (H)Therefore, there are four elements in the substance.
Learn more about chemical formula at: https://brainly.com/question/29031056
#SPJ1
identify which of the following atoms would have the lowest first ionization energy. a) ca b) c c) ge d) p e) cl
The atom with the lowest first ionization energy is C (carbon). The order from highest to lowest is: e) Cl (chlorine) > d) P (phosphorus) > c) Ge (germanium) > b) C (carbon) > a) Ca (calcium).
The atom that would have the lowest first ionization energy is Ca (Calcium). The amount of energy that is required to remove the most loosely held electron from an isolated neutral gaseous atom to form a cation is called the first ionization energy. It is a measure of the stability of an atom. The ionization energy of an element is determined by the amount of energy required to remove an electron from its ground state. The ionization energy is a physical property of an element that varies across the periodic table. The element that has the lowest ionization energy is the most reactive and will most likely form cations.
Identify which of the following atoms would have the lowest first ionization energy. The given atoms are Ca, C, Ge, P, and Cl. Out of these atoms, Ca would have the lowest first ionization energy. The electronic configuration of Ca is 2, 8, 8, 2. Calcium belongs to group 2 and period 4 of the periodic table. It has 20 protons, 20 electrons, and 2 valence electrons. Because of its 2 valence electrons, it has a low ionization energy. The electronic configuration of Ca is most stable because of the presence of the 8 valence electrons in the outermost shell.
The electronic configurations of the other given atoms are:
C: 2, 4Ge: 2, 8, 18, 4P: 2, 8, 5Cl: 2, 8, 7
All of these elements have electrons that are either in the process of filling the valence shell or have already filled it. They have higher ionization energies because of this. Therefore, Ca would have the lowest first ionization energy.
For more such questions on ionization energy , Visit:
https://brainly.com/question/20658080
#SPJ11
