Answer:
0.448 mols
Explanation:
Use balanced equation:
2H2 + O2 -> 2H2O
For every one mole of oxygen, there are two moles of water
hence the molar ratio 1:2
So if there are 0.224 mols of oxygen
Water = 0.224×2
Which is 0.448 mols of H20
sketch the electrolytic cell for converting alumina to aluminum
Franklin was performing an experiment by combining hydrochloric acid and sodium hydroxide. He measured the mass of his reactant materials to be 35g. The reaction resulted in the production of salt and water. He reported that his products weighed 32g. Which best describes the results of Franklin’s experiment? No error occurred, some of the products are always lost as heat. An error occurred, the mass of the reactants should equal the mass of the products. An error occurred, the products should weigh more than the reactants. No error occurred, water is not weighed when determining the weight of the products.
Answer:
B) an error occurred, the mass of the reactants should equal the mass of the products.
Explanation:
The answer choices are:
A) no error occurred, some of the products are always lost as heat.
B) an error occurred, the mass of the reactants should equal the mass of the products.
C) an error occurred, the products should weigh more than the reactants.
D) no error occurred, water is not weighed when determining the weight of the products.
SolutionThe basis to answer this question is the law of conservation of mass.
Any chemical reaction satisfies the law of conservation of mass: mass cannot be either created nor destroyed, so, always, the mass of the reactants equal the mass of the products.
Thus, since he measured the mass of his reactant materials to be 35g and he reported that his products weighed 32g, his data are in clear contradiction of the law of conservation of mass. So, there is an error in his results: the mass of the reactants should equal the mass of the products.
An error occurred, the mass of the reactants should equal the mass of the products according to law of conservation of mass for the given experiment. Therefore, the correct option is option B.
The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process. The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process.
Franklin determined the mass of the reactant components in this instance to be 35g, and the products of the reaction weighed 32g. An error occurred because the mass of the reactants should equal the mass of the products, but the mass of the products is less than the mass of the reactants.
Therefore, the correct option is option B.
To know more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ7
Be sure to answer all parts.
Find the pH during the titration of 20.00 mL of 0.1000 M triethylamine, (CH3CH2)3N (Kb = 5.2 × 10−4), with 0.1000 M HCl solution after the following additions of titrant.
20.20 mL:
pH =
a.
Initial moles of (CH₃CH₂)₃N = (0.1000 mol/L) × (20.00/1000 L) = 0.002 mol
Moles of HCl added = (0.1000 mol/L) × (13.00/1000 L) = 0.0013 mol
Addition of 1 mole of HCl reacts with 1 mole of (CH₃CH₂)₃N to 1 mole of (CH₃CH₂)₃NH⁺.
After addition of 13.00 mL of HCl:
Moles of (CH₃CH₂)₃N left unreacted = (0.002 - 0.0013) mol = 0.0007 mol
Moles of (CH₃CH₂)₃NH⁺ produced = 0.0013 mol
Hence, [(CH₃CH₂)₃NH⁺]/[(CH₃CH₂)₃N] = 0.0013/0.0007 = 13/7
Consider the dissociation of (CH₃CH₂)₃N:
(CH₃CH₂)₃N(aq) + H₂O(l) ⇌ (CH₃CH₂)₃NH⁺(aq) + OH⁻(aq) …… Kb = 5.2 × 10⁻⁴
Henderson-Hasselbalch equation:
pOH = pKb + log([(CH₃CH₂)₃NH⁺]/[(CH₃CH₂)₃N])
pOH = -log(5.2 × 10⁻⁴) + log(13/7) = 3.55
pH = pKw - pOH = 14.00 - 3.55 = 10.45
====
b.
Initial moles of (CH₃CH₂)₃N = 0.002 mol
Moles of HCl added = (0.1000 mol/L) × (20.80/1000 L) = 0.00208 mol
HCl is in excess.
Moles of HCl left unreacted = (0.00208 - 0.002) mol = 0.00008 mol
Volume of the final solution = (20.00 + 20.80) mL = 40.8 mL = 0.0408 L
In the final solution:
[H₃O⁺] = [HCl] = (0.00008 mol) / (0.0408 L) = 0.00196
pH = -log[H₃O⁺] = -log(0.00196) = 2.71
====
c.
Initial moles of (CH₃CH₂)₃N = 0.002 mol
Moles of HCl added = (0.1000 mol/L) × (29.00/1000 L) = 0.0029 mol
HCl is in excess.
Moles of HCl left unreacted = (0.0029 - 0.002) mol = 0.0009 mol
Volume of the final solution = (20.00 + 29.00) mL = 49 mL = 0.049 L
In the final solution:
[H₃O⁺] = [HCl] = (0.0009 mol) / (0.049 L) = 0.0184
pH = -log[H₃O⁺] = -log(0.0184) = 1.74
If a dog has a mass of 21.5 kg, what is its mass in the following units? Use scientific notation in all of your answers.
What is the dog’s mass in grams?
What is the dog’s mass in milligrams?
What is the dog’s mass in micrograms?
Explanation:
use the conversation in the image
what type of chart is used to help organize study and predict genetic inheritance?
Answer:
Its a punnet square
Explanation:
Please could you help me with this question
(No links or spam)
Will give brainliest if correct
Answer:
first one pure
second one mixture..
3. Given the following equation:
2 K+ Cl2 --->2 KCI
How many grams of KCl are produced from 2.50 g of K and excess Cl2?
show work.
Answer:
4.767 grams of KCl are produced from 2.50 g of K and excess Cl2
Explanation:
The balanced equation is
2 K+ Cl2 --->2 KCI
Here the limiting agent is K. Hence, the amount of KCl will be calculated as per the mass of 2.50 gram of K
Mass of one atom/mole of potassium is 39.098 grams
Number of moles is 2.5 grams = [tex]\frac{2.5}{39.098} = 0.064[/tex]
So, 2 moles of K produces 2 moles of KCL
0.064 moles of K will produces 0.064 moles of KCl
Mass of one molecule of KCl is 74.5513 g/mol
Mass of 0.064 moles of KCl is 4.767 grams
The mass of KCl produced is 4.77g
StoichiometryFrom the question, we are to determine the mass of KCl produced
From the given balanced chemical equation,
2K + Cl₂ → 2KCl
This means,
2 moles of potassium reacts with 1 mole of Chlorine to produce 2 moles of potassium chloride
First, we will determine the number of moles of potassium (K) present.
Using the formula,
[tex]Number\ of \ moles = \frac{Mass }{Atomic\ mass}[/tex]
Atomic mass of K = 39.098 g/mol
Then,
Number of moles of K present = [tex]\frac{2.50}{39.098}[/tex]
Number of moles of K present = 0.06394 mole
Now,
If 2 moles of K reacts to produce 2 moles of KCl
Then,
0.06394 moles of K reacts to produce 0.06394 moles of KCl
Thus, the number of moles of KCl produced is 0.06394.
Now, for the mass of KCl produced
From the formula,
Mass = Number of moles × Molar mass
Molar mass of KCl = 74.5513 g/mol
Then,
Mass of KCl produced = 0.06394 × 74.5513
Mass of KCl produced = 4.7668 g
Mass of KCl produced = 4.77 g
Hence, the mass of KCl produced is 4.77g
Learn more on Stoichiometry here: https://brainly.com/question/14328831
Fires are classified into various classes and as such different types of portable fire extinguishers must be used. The theory behind portable fire extinguishers is that the fire can be extinguished by removing any or more of the following four elements:
Fuel, Heat, Oxygen, Chain Reaction.
Identify the extinguishing mechanism and the classe(s) of fires they are used to extinguish for the following types of fire extinguishers:
ABC Powder, Carbon dioxide, Foam, Water.
Answer:
Explanation:
ABC Powder: sprays a very fine chemical powder. This acts to blanket the fire and suffocate it. Class A, B, C fires
Carbon dioxide: extinguishes CO2. By doing so, it removes oxygen from the fire, effectively suffocating it of oxygen. Class B fires
Foam: spray a type of foam that expands when it hits the air and blankets the fire. This prevents the vapors from rising off the liquid to feed the fire, thus starving it of fuel. Class A and B
Water: releases microscopic water molecules that fight the fire on a variety of levels. the level of oxygen in the air is decreased, which helps to suffocate the fire. Class: most all
also, your fire classes:
Class A: freely burning, combustible solid materials such as wood or paper
Class B: flammable liquid or gas
Class C: energized electrical fire (energized electrical source serves as the ignitor of a class A or B fire – if electrical source is removed, it is no longer a class C fire)
Class D: metallic fire (titanium, zirconium, magnesium, sodium)
Class K: cooking fires – animal or vegetable oils or fats
In terms of percentages, what are the 3 biggest uses of natural gases?
1) Using Gas In The Home. In our homes, we end up utilizing the material every day.
2) Use In The Industrial Sector. The industrial sector makes similar use of natural gas liquids as a fuel for process heating and raw material to produce chemicals, fertilizers, and hydrogen.
3) Transportation.
Hope this helps. Btw, I love ur pfp!
Answer:
1) Using Gas In The Home. In our homes, we end up utilizing the material every day. ...
2) Use In The Industrial Sector. The industrial sector makes similar use of natural gas liquids as a fuel for process heating and raw material to produce chemicals, fertilizers, and hydrogen.
3) Transportation.
How do humans influence genetic outcomes in artificial selection and what impacts does this have on society?
Answer:
In artificial selection, humans have the capacity to influence certain characteristics of organisms by selective breeding. One can choose desired parental traits determined by genes, which are then passed on to offspring.
Metals are cunductor of heat and electricity prove this statement
Answer:Metals are an excellent conductor of electricity and heat because the atoms in the metals form a matrix through which outer electrons can move freely. Instead of orbiting their respective atoms, they form a sea of electrons that surround the positive nuclei of the interacting metal ions.
Explanation:
Which measurement occurs last when collecting data to determine the
percentage by mass of a solution?
mass percent = (mass of element in 1 mole of compound / mass of 1 mole of compound) x 100. The formula for a solution is:
mass percent = (grams of solute / grams of solute plus solvent) x 100. or.
mass percent = (grams of solute / grams of solution) x 100. The final answer is given as %.
Hope this helps!!
What is the molarity (molar concentration, unit = M) of K+ found in 200 mL 0.2 M K2HPO4 solution?
Answer:
0.4 M
Explanation:
The process that takes place in an aqueous K₂HPO₄ solution is:
K₂HPO₄ → 2K⁺ + HPO₄⁻²First we calculate how many K₂HPO₄ moles are there in 200 mL of a 0.2 M solution:
200 mL * 0.2 M = 40 mmol K₂HPO₄Then we convert K₂HPO₄ moles into K⁺ moles, using the stoichiometric coefficients of the reaction above:
40 mmol K₂HPO₄ * [tex]\frac{2mmolK^+}{1mmolK_2HPO_4}[/tex] = 80 mmol K⁺Finally we divide the number of K⁺ moles by the volume, to calculate the molarity:
80 mmol K⁺ / 200 mL = 0.4 M1. When there is light, photosynthesis can
A. occur, in the chloroplast.
B. not occur, and the stomata will not be open.
C. not occur, and the stomata will be open.
D. occur, in the
mitochondria.
Answer:
A
Explanation:
Answer:
A. occur, in the chloroplast.
Explanation:
Photosynthesis occur in chloroplasts, with the help of sunlight. Where mitochondria help in respiration
What is the molarity of a solution created by adding 0.75 moles of lithium fluoride to 65 L of solution?
Answer:
Molarity=Moles of solute/volume of solution in Litres
Simply imputing your values
you have
0.75/65
0.0115M.
Muscles and bones work together when muscles move bones through contracting and
relaxing.
A.true
B.false
I think it's true.
Explanation:
Muscles move bones through contracting and relaxing
Given a 0.5 M stock solution of aqueous NaCl, how much of the stock solution would you need to make a 50 mL sample of 0.25 M aqueous NaCl solution? How much water would you need to add to the NaCl solution?
Answer:
25 ml of stock
Explanation:
Molarity x Volume of Concentrated Stock = Molarity x Volume of Diluted Stock
=> Mc x Vc = Md x Vd => (0.5M)(x) = (0.25M)(50 ml)
=> x = Vc = (0.25M x 50 ml) / (0.50M) = 25 ml of stock
What is the name of the structure formed when fertilization occurs?
Answer:
zygote
Explanation:
I got this online
Answer:
ᘔYᘜOTᗴ:=> In human fertilization, a released ovum (a haploid secondary oocyte with replicate chromosome copies) and a haploid sperm cell (male gamete)—combine to form a single 2n diploid cell called the zygote.
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \infty \infty [/tex]
Help asap pls! Circulating air caused when warm air rises and cool air sinks. Convection currents occur throughout the world.
1.barrage 2.collection area 3.convection current
3. Convection Current
But just a tip Next time try to emphasize the question a little more ! Hope this helps :)
The bonds present in carbon tetrachloride (CCI) are
A. covalent
B.ionic
C. metallic
D. van der Waals
45. What is the H ion concentration of an aqueous solution
in which the OH-ion concentration is 1 x 10-2 mole
per liter?
A) 1 X 10-14 M
C) 1 x 10-9M
B) 1 x 10-12 M
D) | 10-2M
Answer:
= 1 X 10⁻⁻¹²M
Explanation:
At 25°C & 1atm [H⁺][OH⁻] = 1 x 10⁻¹⁴ => [H⁺] = 1 X 10⁻¹⁴/[OH⁻] = 1 X 10⁻¹⁴/1 X 10⁻²
= 1 X 10⁻⁻¹²M
Which of these actions increases enthalpy in the air molecules of the Earth's
atmosphere?
A. The air being heated by the sun
B. Trees being planted in the rain forests
C. Carbon dioxide being taken in by plants during photosynthesis
D. People breathing in oxygen
HELP PLS
Answer:
The air being heated by the sun
Explanation:
Just took the quiz
Answer:
The answer is A (the air being heated by the sun)
Explanation:
A P E X
Why is the method of using a density bottle more accurate than the measuring cylinder
Answer:
While measuring relative density of liquids, two common method of measuring the volume are a measuring cylinder and a density bottle. Among these two method the density bottle gives more accurate measurement of the volume, resulting in more accurate determination of density or relative density
Answer:
While measuring relative density of liquids, two common method of measuring the volume are a measuring cylinder and a density bottle. Among these two method the density bottle gives more accurate measurement of the volume, resulting in more accurate determination of density or relative density.
Explanation:
Draw the major organic product formed in the reaction. (The reaction stoichiometry is 1 mol reactant: 1 mol Br2 .)
Answer:
Explanation:
The treatment of aldehyde or ketone in the presence of acetic acid with one mole of bromine results in ∝-halo aldehyde or ketone. However, the bromination of ketone undergoes acidic conditions. Hence, the reaction of the ketone with Bromine resulting in the Major Product is shown in the image attached below.
what is a chemical bond?
how ate chemical bond different from each other?.
a shape with five sides is called a?
Answer:
A five-sided shape is called a pentagon.
Explanation:
Answered by NONE other than the ONE & ONLY #QUEEN herself aka #DRIPPQUEENMO!!!
Hope this helped!!!
Answer:
a pentagon
Explanation:
I remember that a pentagon has 5 sides
if energy cannot be created then how did it exist in the first place???
Answer:
Different types of generators are used to create energy. Electrical energy is caused by moving electric charges called electrons. Electricity is a type of energy that comes from electrical energy. ... In power stations, turbines are turned using energy from sources such as heat, wind and moving water.
Explanation:
Which of the following is a job that bones do?
a.provide the body with shape and protection
b.store minerals
c.produce supply of daily blood cells
d.all of the above
Answer:
a.Provide the body which shape and protection.
Explanation:
Bones usually gives us shape as well as protects our innner organs.
so if it helps don't forget to like and Mark me
Which overall chemical equation is obtained by combining these intermediate equations?
Which of the following molecules has a bent shape?
O A. CO2
O B. H20
O C. BeCl2
O D. NH3
