how many significant figures are in 820 400.0 L

Answers

Answer 1

Answer:

7 significant numbers


Related Questions

Use the following steps to balance the redox reaction using half-reactions. Zn(s) + Fe3+ Zn2+ + Fe(s) (unbalanced) a. Write balanced oxidation and reduction half-reactions. Indicate which is the oxidation reaction and which is the reduction reaction. (6 points) b. Balance the charge in the two half-reactions by multiplying the half-reactions by the correct multiplication factors. (4 points) c. Add the equations and simplify to get the balanced equation.

Answers

Answer:

Explanation:

a )

Zn = Zn²⁺ + 2e   ( oxidation reaction )

Fe³⁺ + 3e = Fe( s ) ( reduction reaction )

b )

[ Zn = Zn²⁺ + 2e ] x 3

[ Fe³⁺ + 3e = Fe( s ) ] x 2

-------------------------------------------------------------------

3 Zn + 2 Fe³⁺ + 6e = 3 Zn²⁺ + 2 Fe ( s ) + 6e

3 Zn + 2 Fe³⁺  = 3 Zn²⁺ + 2 Fe ( s )

If you have a little air in a balloon, find the volume of the balloon if the mass is 0.6 g and the density of the air is 0.0012 g / mL

Answers

Hey there!:

Mass = 0.6 g

Density = 0.0012 g/mL

Volume = ??

Therefore :

Density = mass / Volume

0.0012 = 0.6 / V

V = 0.6 / 0.012

V = 500 mL

Hope this helps!

11. Samantha was asked to measure out 10 g of salt in a lab. She mistakenly measures out 15 g instead. Calculate
the percent error. Make sure your answer has the correct number of significant figures!

Answers

Answer:

50%

Explanation:

Expected measurement required = 10g

Actual measurement observed = 15g

The percentage error is given as proportion the difference between the actual and expected measurement or values and the expected value value expressed as a percentage.

[(Actual - Expected) / Expected] × 100%

[(15 - 10) / 10)] × 100%

(5 / 10) × 100%

0.5 × 100%

50%

Therefore, the percentage error in the measurement is 50%

which of the following molecules would you expect to be optically active

1. CCl2F2
2. 2-methyl butane
3. butan-2-ol​

Answers

Answer:

waaaaaaaaaaqwwwwwwwwwwww

Select the correct answer from each drop-down menu. At chemical equilibrium, the amount of because .

Answers

Answer:

The answer that completes the question are in BOLD:

At chemical equilibrium, the amount of PRODUCT AND REACTANT REMAIN CONSTANT because the RATES OF THE FORWARD AND REVERSE REACTIONS ARE EQUAL.

Explanation:

In a reversible chemical reaction, an equilibrium is said to be achieved when the rates of the forward reaction is equal to that of the reverse reaction. A reversible reaction is one in which products are formed from reactants simultaneously with the formation of reactants from products.

The combination of two or more substances called REACTANTS gives rise to another substance called PRODUCT, which can in turn give rise to Reactants again. With time, the rate at which the reactants give rise the products, which is called the FORWARD REACTION will be equal to the rate at which the products give rise to the reactants, which is called REVERSE REACTION. At this point, the chemical reaction is said to be in a STATE OF EQUILIBRIUM.

When the rate at which both reaction occurs becomes equal i.e. at an equilibrium state, the concentration of both the reactants and the products becomes constant i.e. no longer changes. Hence, the amount of the reactants forming the products is the same as the amount of products forming the reactants.

N.B: At chemical equilibrium, the amount of the reactants and products does not necessarily equals zero (0). It simply means that there is no net change in the concentration/amount of both reactants and products.

does the tendency to gain electrons decrease as we go down grp 17?

Answers

Explanation:

Hi, there!!!!

Let me simply clear you..

Yes,The tendency to gain electrons (in nonmetal) decreases when we go down group 17.

The reason for above answer is when we go downwards in periodic table then the atomic size increases with the addition of number of shells and force of attraction between the nucleus and valance shell decreases. The force of attraction between the nucleus and valance shell becomes weaker due to which the force of attracting the electrons gets decreased.

So, we can say that the tendency to gain electrons decreases as we go down in periodic table.

Hope it helps....

Which element increases its oxidation number in this reaction? 3KOH + H3PO4 → K3PO4 + 3H2O

Answers

Answer:

The answer is "no changes in oxidation number "

Explanation:

Given equation:

[tex]3KOH + H_3PO_4 \longrightarrow K_3PO_4 + 3H_2O[/tex]

In the above-given equation, there are no changes in the oxidation number which can be defined as follows but first we defined the oxidation: In the chemical process, it requires the transfer of ions is oxidation. In particular, it means that products that supply electrodes are oxidized. In the given equation, when 3Potassium hydroxide reacts with phosphoric acid it will produce potassium phosphate and 3 moles of water.

 

Does Na2 gas posses metallic character? Explain your answer..​

Answers

Explanation:

It contains Na2 molecules and the atoms in this molecule are held together by a purely covalent bond because the electronegativity of the two atoms is identical.Metallic bonding would not kick in until you make clusters of quite a few atoms. Such clusters would likely not be very stable because thermodynamically the larger the clump of material the more stable it gets. So they tend to coalesce until you have chunk of metal.Metallic bonding is in a sense a form of covalent bonding, but it is very collective (delocalized over a great many atoms) and electron deficient (there are more states than electrons to fill them up with, leading to conductive properties. This means that “a metallic bond” is a bit of an oxymoron like a forest with only one tree.

Reply me in comments

Yes, Na2 gas possesses a metallic character.

Does NA contain metallic bonds?

In the stable state, metal sodium functions as an array of Na+ ions which can be surrounded by way of a sea of 3s electrons. However, it would be wrong to consider metal sodium as an ion when you consider that the ocean of electrons is shared by using all of the sodium cations, quenching the nice fee.

Sodium most effective has one valence electron. So, in metallic bonding, it is able to only donate one electron to be delocalized at some point of the structure. In steel bonding, the real bonding is the electrostatic force between the effective cations and the delocalized electrons.

Learn more about metallic bonds here: https://brainly.com/question/20536777

#SPJ2

Tips for memorizing the first 20 elements of the periodic table?​

Answers

Answer:

hydrant flying with balloon, balloon has lithp letting air out, bee: really yum balloon

    =                           =                                 =                                   =

hydrogen              helium                     lithium                     beryllium

be bore on the balloon, balloon pops, hydrant drops and makes a car bomb

           =                                                                                                  =

    boron                                                                                              carbon

night row general gets hurt by car bomb nearby, that general gets off boat

        =                                

nitrogen

wearing oxygen mask, mask is full of fluride gel, then he got neon teeth

             =                                               =                                      =

         oxygen                                fluorine                                neon

(try making a story out of the elements, use your imagenation)

I will give u tips to learn whole periodic table

1. Break down the table into sections

2. Spread out the memorisation process

3. Learn the elements in a song

4. Make none sense words made from element symbols

5. Use colour to learn element groups

6. Use mnemonic device to help remember the order of elements

I am sure this will be helpful for uuu

Explanation:

What is 16.30 to the 100th gram

Answers

Answer:

1.65485688 × 10121 grams

Explanation:

Aside from those discrete items, anything like rice or flour can be measured out to make up 100 grams. For example, 1/2 cup (125 ml or about 4 and 1/2 fl. oz) of dry rice weighs very close to 100 grams.

How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. ResetHelp Olive oil has about Olive oil has about blank monounsaturated fats, while canola oil has about blank. monounsaturated fats, while canola oil has about Olive oil has about blank monounsaturated fats, while canola oil has about blank.. Olive oil has about Olive oil has about blank polyunsaturated fats, while canola oil has about blank. polyunsaturated fats, while canola oil has about Olive oil has about blank polyunsaturated fats, while canola oil has about blank..

Answers

This question is incomplete, here´s the complete question.  

How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right.

Olive oil has about ____ monounsaturated fats, while canola oil has about ___.

Olive oil has about ___ polyunsaturated fats, while canola oil has about ___.

6%

10%

30%

84%

5%

65%

Answer:

Olive oil has about 84% monounsaturated fats, while canola oil has about 65%.

Olive oil has about 5% polyunsaturated fats, while canola oil has about 30%.

Explanation:

Olive and canola oil are the major sources of monounsaturated fatty acids. Although vegetable oils usually have high concentrations of polyunsaturated fatty acids and less monounsaturated fats, olive and canola oils have comparatively less polyunsaturated fatty acids, and more monounsaturated fatty acids.

Polymers formed from amino acids are called _____. proteins carbohydrates lipids nucleic acids

Answers

Answer:

Proteins

Explanation:

Amino acids act as monomers (a single unit used to form polymers) , the polymer will be a long chain of individual amino acids. An amino acid chain forms a protein. These proteins are also known as peptides.

Hope this helps and please mark as the brainliest.

1.) Given 30 grams of CO2, how many moles of CO2 would you have? How many individual molecules of CO2 is that?
2., Given 22 Grams of NaCl, How many moles of Nacl would you have? How many individual molecules of NaCl is that?
3.) Given 50 grams of ammonia NH3, How many moles of NH3 would you have? How many Molecules of NH3 is that?​

Answers

Answer:

1a) .68 moles 1b)4.1E-23 molecules.

2a) .37 moles 2b) 2.27E-23 molecules

Explanation:

1a) CO2 is equal to 44 grams (C→12 grams,O→16 grams[·2]) .30g/44g is .68 moles.

1b) multiply 1A by advogadros number (6.022E-23)

2a) NaCl is 58 grams. 22/58 is .37 moles.

2b) multiply 2A by advogadros number.

you'd answer #3 the same way #1 and #2

The branch of science that deals with chemicals and bonds are called chemistry. The moles are units to calculate the quantity required to use the element.

The correct answer is mentioned below.

What are moles?The mole is the base unit of the amount of substance in the International System of Units (SI). It is defined as exactly 6.02214076×10^23 elementary entities which may be atoms, molecules, ions, or electrons.

According to the question, the moles to the option is as follows:-

moles of 30 grams of CO2 is

[tex]n =\frac{M}{M.M}\\ \\\frac{30}{44} \\\\=0.681\\\\[/tex]

The number of molecules is [tex]0.68 *6022*10^{23} =4.09496*10^{23[/tex].

2. moles of 22 grams of NaCl is

[tex]\frac{22}{44}\\ \\=0.5\\\\[/tex]

Molecules will be [tex]0.5*6.022*10^{23} = 3.011*10^{23}[/tex]

3. moles of 50-gram ammonia

[tex]\frac{50}{17} \\\\2.94\\[/tex]

The number of molecules is [tex]2.94*6.022*10^{23} = 1770*10^{23[/tex]

For more information about the moles, refer to the link:-

https://brainly.com/question/15209553

Which of the following elements has a complete outer shell of electrons? A. Iron (Fe) B. Hydrogen (H) C. Neon (Ne) D. Nitrogen (N)

Answers

Answer:

The answer is Neon

Answer:

neon

Explanation:

neon has a complete outer 2n shell

A gas has a volume of 25.0 mL at 2.50 atm. What is the volume at 457 mmHg if the temperature remains constant?

Answers

Answer:

≈ 0.104 liters  

Explanation:

We can use Boyle's Law: [tex]P_{1}V_{1} = P_{2}V_{2}[/tex]

P₁ = 2.50 atm

V₁ = 25.0 mL

P₂ = 457 mmHg

V₂ = ?

Because pressure should be in atm we will convert 457 mmHg to units in atm:

1 atm = 760mmHg so we can divide 457 by 760 and we get ≈ 0.601atm

Next we can plug in the units to the equation for Boyle's Law:

(2.50)(25.0) = (0.601)(V₂)

Solve for V₂

V₂ will give you ≈ 104mL or 0.104L

Either is correct depending on which unit they are asking you to use

Difference between atomic number and atomic weight any 2 points

Answers

Answer:

According to the definitions given, atomic mass which is also called atomic weight is the measured total mass of an element's atom. Whereas, atomic number is nothing but the total number of neutrons and protons in the nucleus of an atom....

can u talk to in comment section

List the metals Mg, Cu, Au, Na and Al in the decreasing order of their reactivity with air.

Answers

Answer:

Na is most reactiveAlcuAu is less reactiveIN HERE

Answer:

Potassium  (K)

Sodium  (Na)    

Calcium  (Ca)

Magnesium (Mg)  

Aluminium  (Al)

Iron  (Fe)  

Lead  (Pb)

Copper  (Cu)  

Silver  (Ag)

Gold  (Au)

Which of the following is NOT a product of the electrolysis of NaCl? A. Chlorine gas B. None of these C. Hydrogen gas D. Oxygen gas

Answers

Answer:D. Oxygen gas

Explanation: because the experiment showed

When two ionic compounds are dissolved in water, a double replacement reaction can... Group of answer choices occur if two of the ions form an insoluble ionic compound, which precipitates out of solution occur if the ions react to form a gas, which bubbles out of the solution never occur since all ions are in water occur if the ions react to form a gas, which bubbles out of the solution ionic compounds only react with nonmetals

Answers

Answer:

occur if two of the ions form an insoluble ionic compound, which precipitates out of solution

Explanation:

When two ionic compounds are dissolved in water, a double replacement reaction takes place if two of the ions form an insoluble ionic compound, which precipitates out of solution. In double displacement reaction ions switch partners. And hence, produce an insoluble precipitate.

begging u to answer Which is not an inter molecular force? Select one: a. Inter atomic bonds b. van der waals forces c. hydrogen bonds

Answers

Answer:

a-Interatomic bonds

Explanation:

First of all, it is not a force. Let alone be molecular force.

Determinación de pH Expresa las siguientes concentraciones de [H+ ] en función del pH • [H+] = 0.001 M • [H+] = 0.002 M • [H+] = 2.45X10-4 M • [H+] = 5.2X10-9 M • [H+] = 0.04 M

Answers

Answer:

• pH = 3.0

• pH = 2.70

• pH = 3.61

• pH = 8.28

• pH = 1.40

Explanation:

El pH es una medida en química usada para determinar el grado de acidez o basicidad en una solución.

Se define como:

pH = -log₁₀ [H⁺]

El - logaritmo de la concentración molar de H⁺

Para las concentraciones de H⁺ dadas:

• [H+] = 0.001 M

pH = -log (0.001M) = 3

pH = 3.0

• [H+] = 0.002 M

pH = -log (0.002M)

pH = 2.70

• [H+] = 2.45X10-4 M

pH = -log (2.45X10-4 M )

pH = 3.61

• [H+] = 5.2X10-9 M

pH = -log (5.2X10-9 M)

pH = 8.28

• [H+] = 0.04 M

pH = -log (0.04M)

pH = 1.40

Si se usa 450 gramos de carbonato de calcio para dicho proceso ¿Qué volumen de CO2 se obtendrá, si la presión es de 8 atm y la temperatura 200°C? R=0,082 atm.L/mol.K

Answers

Respuesta:

21.8 L

Explicación:

Paso 1: Escribir la reacción balanceada

CaCO₃ ⇒ CaO + CO₂

Paso 2: Convertir 450 g de CaCO₃ a moles

La masa molar de CaCO₃ es 100.09 g.

450 g × (1 mol/100.09 g) = 4.50 mol

Paso 3: Calcular los moles de CO₂ que se forman a partir de 4.50 moles de CaCO₃

La relación molar de CaCO₃ a CO₂ es 1:1. Los moles de CO₂ formados son 1/1 × 4.50 mol = 4.50 mol.

Paso 4: Convertir la temperatura a Kelvin

Usaremos la siguiente expresión.

K = °C + 273.15 = 200°C + 273.15 = 473 K

Paso 5: Calcular el volumen de CO₂

Usaremos la ecuación del gas ideal.

P × V = n × R × T

V = n × R × T / P

V = 4.50 mol × (0.082 atm.L/mol.K) × 473 K / 8 atm

V = 21.8 L

What happens when two objects when they are brought closer together The mass of both objects decrease The mass of both objects increase The gravitational force between them decreases The gravitational force between them increases

Answers

Answer:

The correct option is

The gravitational force between them increases

Explanation:

According to Newton's law of universal gravitation states that the force of attraction between two bodies is directly proportional to the product of the masses of the bodies and inversely proportional to the square of the distance of their centers from each other.

The formula for universal gravitation is given as follows;

[tex]F_{1} = F_{2} =G \times \dfrac{m_{1} \times m_{2}}{r^{2}}[/tex]

Where;

F₁, and F₂ = The gravitational forces of attraction on each mass

G = The gravitational constant

m₁ = The mass of one body

m₂ = The mass of the body

r = The distance between the centers of the two bodies

Therefore, the gravitational force of attraction on each object is inversely proportional to the as the distance between the centers of the two bodies

When the distance between the centers of the two bodies decreases, the two objects are brought closer together, the gravitational force of attraction between them increases.

Answer:

Gravitational force between two objects of masses m1/m2

Explanation:

is defined by Gm1xm2/r^2, where G is a universal constant, and r is the distance between the masses. This shows you why B is wrong; it would increase. Also, A is not a good choice, as shown. In the case of B, it would increase by say, 2/1 to 4/1 by doubling ones mass. In C's case the bottom would decrease on the fraction alot (square) if they were moved closer, thus the force would be greater.

Explanation:

in other words the  answer is The gravitational force between them increases

Given that the density of air is 14.4, then the vapour of sulphur IV oxide is A. 16 B. 32 C. 64 D. 128
Thank you.

Answers

Answer:

32

Explanation:

The vapour density of a gas is the number of times a given volume of gas or vapour is as heavy as the same volume of hydrogen at a particular temperature and pressure.

Vapour density = 2 × relative molecular mass of the gas or vapour

Relative molecular mass of SO2 = 32 + 2(16) = 64

Hence;

Vapour density of SO2 = 64/2

Vapour density of SO2 = 32

formula for soda glass

Answers

Answer:

composition of soda-lime glass is 73% SiO2 – 15% Na2O − 7% CaO − 4% MgO − 1% Al2O3 [129,132,133].

The Soda glass formula is SiO2, Na2O, CaO, Al2O3, K2O, SO3, MgO, Fe2O3, TiO2

Soda glass is a chemical compound that stands out for being the most widely used material to make windows, bottles, glasses, among others.

This compound is characterized by being chemically stable, reasonably hard, and extremely versatile because it can be recycled since it can be melted to make new products.

Its chemical formula is made up of other compounds such as:

SiO2, is Silicon OxideNa2O, is sodium oxideCaO, is calcium oxideAl2O3, is aluminum oxideK2O, is potassium oxideSO3, is sulfur oxideMgO, is magnesium oxideFe2O3, is iron oxideTiO2, is Titanium Oxide

Additionally, the compounds found in the highest proportion in glass are SiO2 (74 atoms) and Na2O (13 atoms).

Learn more in: https://brainly.com/question/1247523

if 193 ml of chlorine gas was collected at 21 celsius, what volume would it have if the temperature dropped to 0 celsius

Answers

Answer:

New volume of chlorine gas (V2) = 179 ml (Approx)

Explanation:

Given:

Volume of chlorine gas (V1) = 193 ml

Temperature of chlorine gas (T1) = 21°C = 21 + 273 = 294 k

New temperature of chlorine gas (T2) = 0°C = 0 + 273 = 273 k

Find:

New volume of chlorine gas (V2) = ?

Computation:

Using charle's law

V1 / T1 = V2 / T2

193 / 294 = V2 / 273

V2 = 179.21

New volume of chlorine gas (V2) = 179 ml (Approx)

Answer it answer it answer it

Answers

Answer:

[tex]\Large \boxed{\mathrm{A}}[/tex]

Explanation:

Rust formed from iron and oxygen combining is a chemical change, because in a chemical change, the resulting substance(s) will have different properties from the substance(s) before the chemical change.

I cant comment... So is it Right?

A baseball has a mass of 135 grams and a softball has a mass of 270 grams. In which of the following situations would they have the same momentum? The baseball and softball are thrown at the same speed in the same direction.

Answers

Answer:

The baseball is thrown twice as fast as the softball in the same direction.

Explanation:

PLEASE HELP WILL GIVE BRAINLIEST!!!!
If the concentration of substance A of a reversible reaction in dynamic equilibrium increases, how will the equilibrium change?
A. It will shift to create more of substance A.
B. It will shift towards the reactants.
C. It will shift towards the products.
D. It will shift to create less of substance A.

Answers

Answer:

[tex]\boxed{It\ will\ shift\ to\ create\ less\ of\ substance\ A}[/tex]

Explanation:

If the concentration of any substance A in a dynamic equilibrium increases, The equilibrium will be  shifted to its opposite side so that Substance A can be created less and the substance opposite to A can be created more so that a "dynamic equilibrium" can again be established.

100 cm^3 of oxygen diffuses through a Porous in 3second how long will it take 150 cm^3 of sulphur (iv) oxide diffuse through the same pot? ( oxygen= 16 sulphur = 32)​

Answers

Answer:

3.18 seconds

Explanation:

Given the following :

Volume of oxygen (V1) = 100cm^3

Time taken (t1) = 3 seconds

Volume of Sulphur (iv) oxide (v2) = 150cm^3

From Graham's Law of diffusion:

(r1/r2) = √(m1/m2)

Where r = rate of diffusion

m = molar mass

Note rate (r) = (volume / time)

[(V1/t1) ÷ (v2/t2)] = √(m1/m2)

(v1/t1) * (t2/v2) = √(m1/m2)

m1 = 02 = (16 * 2) = 32

m2 = SO2 = (32 + (16 * 2)) = 64

(100/3) * (t2/150) = √(32/64)

100t2 / 450 = √(32/64)

100t2 / 450 = √32 / 8

100t2 / 450 = √32 / 8

100t2 * 8 = 450 * √32

800t2 = 2545.5844

t2 = 2545.5844 / 800

t2 = 3.1819805

t2 = 3.18 seconds

It will take 3.18s for 150cm^3 of Sulphur (iv) oxide to diffuse through the same pot.

Other Questions
Need help quick pls A city is holding a referendum on increasing property taxes to pay for a new high school. In a survey of 434 likely voters, 202 said that they would vote "yes" on the referendum. Create a 95% confidence interval for the proportion of likely voters who would vote "yes" on the referendum. Use a TI-83, TI-83 plus, or TI-84 calculator, rounding your answers to three decimal places. Solve for x. 7x+38=45 Every interaction with the outside world is because of A) epithelial tissue B) connective tissue C) nervous tissue D) muscular tissue An atom of 108Te has a mass of 107.929550 amu. Calculate the binding energy per MOLE in kJ. Use the values: mass of 1H atom A table has five bowls. None of the quantities in the bowls are prime, though the last two bowls are empty. Two of the quantities are squares, and when added to the remaining number, the sum is 21. What are the amounts in the first three bowls? How much will $1000 deposited in an account earning 7% interest compounded annually be worth in 20 years? (which formula do I use? I am confused...txs) Canon was able to redesign the copying machine so that it didn't need professional servicereliability was built directly into the machine, and the user could replace parts, such as the cartridge. What Xerox had not envisioned was the possibility that the components of the copying machine could be put together in an altogether different way that was more user-friendly. This example describes please pllssssss ASAP answers not for fun.analyze Pear Corporation is considering Alternative A and Alternative B. Costs associated with the alternatives are listed below:Alternative A Alternative BMaterials costs $ 40,000 $ 56,000Processing costs $ 37,000 $ 37,000Equipment rental $ 13,000 $ 13,000Occupancy costs $ 15,000 $ 22,000Are the materials costs and processing costs relevant in the choice between alternatives A and B?Multiple ChoiceA) Only processing costs are relevantB) Only materials costs are relevantC) Both materials costs and processing costs are relevantD) Neither materials costs nor processing costs are relevant Volatility risk is Group of answer choices the percentage change in the stock call-option price divided by the percentage change in the stock price. the sensitivity of the delta to the stock price. the risk incurred from unpredictable changes in volatility. the volatility level for the stock that the option price implies. Difference between atomic number and atomic weight any 2 points A skin cell of a red fox has 34 chromosomes. You look at the cell under a microscope and see that it has 34 chromosomes and one nucleus. Several hours later, you look at the same cell a second time and see that it has double the amount of DNA and one nucleus. A little while later, you see the cell for a third time and notice that it has 68 chromosomes and two nuclei. What stage of the cell cycle was this cell in when you viewed it at each time point A manufacturing company is expected to pay a dividend of br. 1.25 per share at the end of the year (D1=br.1.25). The stock sells for br. 32.50 per share and its required rate of return is 10.5%. The dividend is expected to grow at some constant rate forever. What is the growth rate PLEASE HELPPPPP!!!!!!!!!!!!!!!Which relationships have the same constant of proportionality between y and x as the following graph?Choose two answers!! FIFO Perpetual Inventory The beginning inventory at Dunne Co. and data on purchases and sales for a three-month period ending June 30 are as follows: Date Transaction Number of Units Per Unit Total Apr. 3 Inventory 48 $150 $7,200 8 Purchase 96 180 17,280 11 Sale 64 500 32,000 30 Sale 40 500 20,000 May 8 Purchase 80 200 16,000 10 Sale 48 500 24,000 19 Sale 24 500 12,000 28 Purchase 80 220 17,600 June 5 Sale 48 525 25,200 16 Sale 64 525 33,600 21 Purchase 144 240 34,560 28 Sale 72 525 37,800 Required: 1. Record the inventory, purchases, and cost of merchandise sold data in a perpetual inventory record similar to the one illustrated in Exhibit 3, using the first-in, first-out method. Under FIFO, if units are in inventory at two different costs, enter the units with the LOWER unit cost first in the Cost of Goods Sold Unit Cost column and in the Inventory Unit Cost column. Dunne Co. Schedule of Cost of Goods Sold FIFO Method For the Three Months Ended June 30 Purchases Cost of Goods Sold Inventory Date Quantity Unit Cost Total Cost Quantity Unit Cost Total Cost Quantity Unit Cost Total Cost Apr. 3 $ $ Apr. 8 $ $ Apr. 11 $ $ Apr. 30 May 8 May 10 May 19 May 28 June 5 June 16 June 21 June 28 June 30 Balances $ $ 2. Determine the total sales and the total cost of goods sold for the period. Journalize the entries in the sales and cost of goods sold accounts. Assume that all sales were on account. Record sale Record cost 3. Determine the gross profit from sales for the period. $ 4. Determine the ending inventory cost as of June 30. $ 5. Based upon the preceding data, would you expect the ending inventory using the last-in, first-out method to be higher or lower? What is the value of 1 in 1,255 is what times the value of the 1 in 82,175 Burpee Company sells seeds to garden stores. Sales are expected to be $2,038,635 in January, $2,581,891 in February and $2,913,307 in March. Burpee sets their prices so that they earn an average 32% gross profit on sales revenue. What is budgeted cost of goods sold for the first quarter (January, February and March)? Suppose that Mexico experienced a very severe period of inflation in 1972. As prices in Mexico rose, the demand in the foreign exchange market for Mexican pesos: HELP SOMEONE PLEASE!!!!! Factor completely 10x2 + 2x 8. 2(5x 1)(x + 4) 2(5x 4)(x + 1) 2(5x + 2)(x 2) 2(5x 2)(x + 2)