Complete question :
How much power is generated if a person applies 220 N of force to move a bicycle 5m in 10 s?
Answer:
Explanation:
Given that :
Force = 220N
Time = 10 seconds
Distance = 5 m
Power = Workdone / time
An inductor is connected to a 120-V, 60-Hz supply. The current in the circuit is 4.3A. What is the inductive reactance
Answer:
27.91ohms
Explanation:
From the question we are given the following
Voltage across the inductor VL = 120V
Current in the inductor I = 4.3A
Required
Inductive reactance XL
Using two formula
VL =IXL
XL = VL/I
XL = 120/4.3
XL = 27.91ohms
Hence the inductive reactance is 27.91ohms
let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...
question: is this actually hypothetical?
Explanation:
also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .
Answer:
the same thing the last guy said
how much KE does the car have if it weighs 450kg and moves at the speed of 23 m/s?
Answer:-The formula of to calculate KE = 1/2 m v^2
so we,
KE = 1/2 (450kg)(23m/s)^2
KE = 1/2 ×238050
KE = 119025
Explanation: In Physics Formulas mean everything.
what medical uses does radiation have?
Answer:
Radiation is used in monitoring the response of tumors to treatment and in distinguishing malignant tumors from benign ones. Bone and liver scans can detect cancers that have spread to these organs. Half of all people with cancer are treated with radiation, and the number of those who have been cured continues to rise.
Explanation:
''.''
A block slides along a frictionless surface and onto a slab with a rough surface. The slab has mass of 4 kg and the block has mass of 2 kg. What is the friction force on the small block at t = 1 second?
Answer: the friction force on the small block at t equals 1 second is 2N
Explanation:
Given the data in the question;
from the slope in the graph provided, we will get the acceleration of the slab
At t = 1 seconds
Slope = acceleration = ( 1 - 0) / ( 2 - 0 ) = 1/2 = 0.5 m/s²
Force = ma = 4 × 0.5 = 2 N
so by Newton's third law
Force on block will be same which is 2N
Therefore the friction force on the small block at t equals 1 second is 2N
If two cars A and B are moving with velocity 60 km/hr and 80 km/hr
respectively in thesamedirection. What willbethe relative velocity of B with
respect to A? (20 kmhr)
Answer:
VAB = 20km/hr
Explanation:
Given the following data;
Velocity of car A, VA = 60km/hr
Velocity of car B, VB = 80km/hr
To find the relative velocity of B w.r.t A, VAB;
Since the two cars are moving in the same direction, we have;
VAB = VB - VA
Substituting into the equation, we have;
VAB = 80 - 60
VAB = 20km/hr
Therefore, the relative velocity of car B with respect to car A is 20 kilometers per hour.
How long does it take for a bee traveling 11.34 m/s to fly 120 m?
An object of mass 30 kg is falling in air and experiences a force due to air resistance of 50 newtons. Calcuate the acceleration of the object
Answer:
this answer you question
A crate is pulled 7 m across a smooth surface. The tension in the rope pulling the crate is 40 N. If the work on the crate is 247 J, what is the angle the rope makes with the horizontal
Answer:
61.9°
Explanation:
The formula for calculating the workdone is expressed as
Workdone = Fdsin theta
F is the force applied on the crate
d is the distance covered
theta is the angle that the rope makes with the horizontal
Given
F = 40N
d = 7m
Workdone = 247J
Substituting into the formula:
247 = 40(7)sin theta
247 = 280sin theta
sin theta = 247/280
sin theta = 0.88214
theta = arcsin(0.88214)
theta = 61.9°
Hence the angle that the rope makes with the horizontal is 61.9°
A person lifts a heavy load to a vertical height of 2.0 m in 3 seconds. If he/she had done this more slowly in 6 seconds, the
work on the load would have been:
Four times as great
half as great
the same
twice as great
Answer:
If the heavy load had been lifted more slowly, the work done on the load would have been the same.
Explanation:
Work done on an object is given as;
W = Fd
where;
F is the force applied on the object
d is the displacement of the object
for the given question, the applied force on the load = mg (mass of the load multiplied by acceleration due to gravity).
Also, the displacement of the object = vertical height the load was lifted.
W = mgh
The work done on the load is independent of time.
Thus, if the heavy load had been lifted more slowly, the work done on the load would have been the same.
A person lifting a heavy load to a vertical height of 2.0 m in 3 seconds does the same work as if he/she lifts it in 6 s.
A person lifts a heavy load to a vertical height of 2.0 m in 3 seconds.
We want to compare the work done with the one that he/she would have done if the process had taken 6 seconds.
What is work?In physics, work (W) is the energy transferred to or from an object via the application of force (F) along a displacement (s).
W = F × s
Given the displacement is the same (2.0 m) and the force needed is also the same (weight of the object), the work is the same for both processes.
A person lifting a heavy load to a vertical height of 2.0 m in 3 seconds does the same work as if he/she lifts it in 6 s.
Learn more about work here: https://brainly.com/question/25064916
If the angle between the net force and the displacement of an
object is greater than 90 degrees, then which option holds
true?
aThe object stops
b Kinetic energy decreases
C Kinetic energy increases
d Kinetic energy remains the same
Answer: kinetic energy decreases
Explanation:
When the angle between the net force and the displacement of an
object is greater than 90 degree, the Kinetic energy decreases.
The work done by a net force in moving an object over a given distance is given as;
[tex]W = F \times d \ cos(\theta)[/tex]
where;
θ is the angle between the net force and the displacementThe value of cos(θ) decreases from 0 to 180, consequently, the value of work-done will decrease as well.
Based on work-energy theorem, the work done on the object is equal to kinetic energy of the object.
[tex]W = K.E[/tex]
Thus, we can conclude that when the angle increases, the Kinetic energy decreases.
Learn more about kinetic energy here:https://brainly.com/question/10063455
why does the force of air resistance affect the motion of a person traveling at high speed more than a person walking across the room?
Answer:
yes .
Explanation:
...
;-; :) have a good day
Answer:
because on air the speed is high compared to walking
Question 3 (10 points)
The force of gravity depends on what two factors?
Question 3 options:
mass and distance
mass and acceleration
distance and time
velocity and displacement
Answer:
mass and distance
Explanation:
The force of gravity acting on a body depends on the mass of the body and the distance between the bodies.
This is based on Newton's law of Universal gravitation which states that "the force of gravity between two bodies is directly proportional to the product of their masses and inversely proportional to the distance between them".
We see that the more the masses between two bodies, and the lower their separation the more the gravitational force between them.
A projectile is fired with a velocity of 8 m/s at an angle of 65º. What is the
vertical component of the velocity?
A. 6.5 m/s
B. 3.4 m/s
C. 10.2 m/s
D. 7.2 m/s
Answer:
i think its D
Explanation:
Please answer the questions... I will surely mark you as the brainliest according to me :)
Answer:
(a) You can tell that have the same strength because they have attracted the same amount of paper clips.
(b) Iron is used in electromagnets because steel retained magnetic properties after the power was turned off, but in the iron, the paper clips dropped off right away.
PLEASE ANSWER FAST ill give brainliest
How are energy and motion related?
Motion energy is indeed the total of kinetic and potential energies in a workable item. The energy contained in moving things is known as motion energy.
What is energy?In physics, energy is the capacity to accomplish work. It can be potential, kinetic, thermal, electric, chemical, radioactive, or in other forms. There is also heat and work, which is energy inside the process of being transferred through one body to the other. Energy is always classified according to its type once it has been transmitted.
The energy contained in moving things is known as motion energy, sometimes known as mechanical energy. More energy is saved when the thing goes quicker. Motion energy is indeed the total of kinetic and potential energies in a workable item.
Therefore, motion energy is indeed the total of kinetic and potential energies in a workable item.
To learn more about energy, here:
https://brainly.com/question/29763772
#SPJ2
A block of mass m is hung from the ceiling by the system of massless springs consisting of two layers. The upper layer consists of 3 strings in paralle, and the lower layer consists of 2 strings in parallel. The horizontal bar between the two layers has negligible mass. The force constants of all springs are k. Calculate the period of the vertical oscillations of the block.
Answer:
T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex] T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀
Explanation:
When the block is oscillating it forms a simple harmonic motion, which in the case of a spring and a mass has an angular velocity
w = [tex]\sqrt{k/m}[/tex]
To apply this formula to our case, let's look for the equivalent constant of the springs.
Let's start with the springs in parallels.
* the three springs in the upper part, when stretched, lengthen the same distance, therefore the total force is
F_total = F₁ + F₂ + F₃
the springs fulfill Hooke's law and indicate that the spring constant is the same for all three,
F_total = - k x - k x - kx = -3k x
therefore the equivalent constant for the combination of the springs at the top is
k₁ = 3 k
* the two springs at the bottom
following the same reasoning the force at the bottom is
F_total2 = - 2 k x
the equivalent constant at the bottom is
k₂ = 2 k
now let's work the two springs are equivalent that are in series
the top spring is stretched by an amount x₁ and the bottom spring is stretched x₂
x₂ = x -x₁
x₂ + x₁ = x
if we consider that the springs have no masses we can use Hooke's law
[tex]-\frac{F_{1} }{k_{1} } - \frac{F_{2}}{k_{2} } = \frac{F}{k_{eq} }[/tex]
therefore the equivalent constant is the series combination is
[tex]\frac{1}{k_{eq} } = \frac{1}{k_{1} } + \frac{1}{k_{2} }[/tex]
we substitute the values
\frac{1}{k_{eq} } = \frac{1}{3k } + \frac{1}{2k }
\frac{1}{k_{eq} } = \frac{5}{6k} }
k_eq = [tex]\frac{6k}{5}[/tex]
therefore the angular velocity is
w = [tex]\sqrt{\frac{6k}{5m} }[/tex]
angular velocity, frequency, and period are related
w = 2π f = 2π / T
T = 2π / w
T = 2π [tex]\sqrt{\frac{5m}{6k} }[/tex]
T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex]
T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀
Determine the speed, wavelength, and frequency of light from a helium-neon laser as it travels through flourite. The wavelength of the light from the laser is 632.8 nm in air and the index of refraction of flourite is 1.434.
Answer and Explanation:
The computation is shown below:
As we know that
Frequency = Speed ÷ wavelength
= (3 × 10^8 )÷ (632.8 × 10^-9)
= 4.74 × 10^14 Hz
Speed in flourite is
= Vaccum speed ÷ refraction index
= 3 × 10^8 ÷ 1.434
= 2.092 × 10^8 m/s
wavelength is
= Speed in flourite ÷ frequency
= (3 × 10^8 × 632.8 × 10^-9) ÷ (1.434 × 3 × 10^8)
= 441.28nm
A 1.3-kg model airplane flies in a circular path on the end of a 23-m line. The plane makes
4.3 revolutions each minute.
a. What is the period of the motion?
b. What is the speed of the plane?
c. What is the acceleration of the model plane?
d. How much force must the line exert on the plane to keep it moving in the circular
motion?
(a) The plane makes 4.3 revolutions per minute, so it makes a single revolution in
(1 min) / (4.3 rev) ≈ 0.2326 min ≈ 13.95 s ≈ 14 s
(b) The plane completes 1 revolution in about 14 s, so that in this time it travels a distance equal to the circumference of the path:
(2π (23 m)) / (14 s) ≈ 10.3568 m/s ≈ 10 m/s
(c) The plane accelerates toward the center of the path with magnitude
a = (10 m/s)² / (23 m) ≈ 4.6636 m/s² ≈ 4.7 m/s²
(d) By Newton's second law, the tension in the line is
F = (1.3 kg) (4.7 m/s²) ≈ 6.0627 N ≈ 6.1 N
HELP ASAP!
Everything on screenshot!
Using a pulley, you apply a force of 10 Newtons to life an object that weighs 100 Newtons. What is the mechanical advantage of that pulley?
Answer: 10
Explanation:
The mechanical advantage of that pulley is 10.
What is mechanical advantage?The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.
Mechanisms are machine parts made to control forces and motion in this way.
Given that: the weighs of the object: W = 100 Newton.
Applied force: F = 10 N.
For using a pulley, you have to apply a force of 10 Newtons to lift an object that weighs 100 Newtons.
Hence, the mechanical advantage of the pulley is
= Weighs of the object/applied force
= 100 Newton / 10 Newton.
= 10.
The mechanical advantage of it is 10.
Learn more about mechanical advantage here:
https://brainly.com/question/16617083
#SPJ5
Do you know how to do this clever ones hmmm?? Describe and explain the motion of a small ball floating on a pond when waves travel across the pond.
Answer:
Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.
Explanation:
What is the standard form for 2 × 10−3 ?
Answer:
17
Explanation:
2 x 10 = 20
20-3 = 17
A volleyball experiences 494 Ns of impulse over a time period of 7 seconds. What was the magnitude of the force that acted on the volleyball during this time period?
Answer:
70.6N
Explanation:
Given parameters:
Impulse = 494Ns
Time = 7s
Unknown:
Force applied = ?
Solution:
To solve this problem, we use the formula of impulse;
Impulse = Force x time
Now insert the parameters and solve;
494 = Force x 7
Force = [tex]\frac{494}{7}[/tex]
Force = 70.6N
I need help with this please
Answer:
1. The respiratory system functions when our involuntary nervous system sends impulses to the muscles in the diaphragm; thereby, causing the lungs to expand and contract.
2. The respiratory system oxygenates the blood which is vital for bodily function as oxygenated blood is carried from your lungs to the left side of your heart, to be circulated throughout the body. Furthermore deoxygenated blood is carried back to the right side of your heart to get oxygenated once more.
3. The other body systems that are crucial for the lungs to function are the nervous system and the muscular system.
4. without the raspatory system the body wouldn't receive any oxygen and the brain would slowly die. therefore, without the brain the heart would stop functioning and atrophy etc.
Explanation:
the combined focal length of two thin lens is 24 cm and the focal length of one converging lens is 8
cm what is the focal length of the other
Answer: f = -12 cm
Explanation: Combined lenses is an array of simple lenses with a common axis. The combination is useful for correction of optical aberrations which cannot be corrected by simple lenses.
When two lenses are in contact and are thin, focal lengths are related as:
[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]
If there is a distance between the lenses, the focal length will be:
[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}} -\frac{d}{f_{1}f_{2}}[/tex]
Since the lenses in the question above are thin and in contact, the focal length of one of them will be:
[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]
[tex]\frac{1}{f_{2}} =\frac{1}{f_{1}} -\frac{1}{F}[/tex]
[tex]\frac{1}{f_{2}} =\frac{1}{8} -\frac{1}{24}[/tex]
[tex]\frac{1}{f_{2}} =\frac{-2}{24}[/tex]
[tex]f_{2}=[/tex] -12
The focal length of the other lens is -12 cm, with the negative sign meaning it's a converging lens.
5) Choose the best revision of the following statement: "All the isotopes of a particular element decay radioactively by
emitting electrons."
A. All the isotopes of a particular element are stable and do not decay.
B. Some isotopes are stable and others are unstable. Unstable isotopes decay by emitting various subatomic
particles and radiation
C. Some isotopes are stable and others are unstable. Unstable isotopes decay by emitting protons or
electrons.
D. The statement is correct as it is currently written.
Answer:
B. some isotopes are stable and others are unstable. unstable isotopes decay by emitting various subatomic particles and radiation.
Explanation:
test gave me the answer so yeah :/ XD
the force of an electric field is proportional to to electric charge? True or False
Answer:True
Explanation:
Answer:
I am going to say true not too sure
Suppose that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat. The change in internal energy of the spring is?
Answer: 85J
Explanation:
From the question, we are informed that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat.
Therefore, the change in internal energy of the spring will be calculated as:
ΔU = q + w
where, q = -15J
w = 100J
ΔU = -15J + 100J
= 85J
