Explanation:
One of the most remarkable aspects of organizational change efforts is their low success rate. There is substantial evidence that some 70% of all change initiatives fail. This article explores the argument that a potentially significant reason for this is a lack of alignment between the value system of the change intervention and of those members of an organization undergoing the change. In order to test this assertion, the article begins by reviewing the change literature with regard to the impact of values on success and failure. It then examines Graves' Emergent Cyclical Levels of Existence Theory and uses this as the basis of a method for identifying and aligning value systems. The article then presents the results from case studies of two change initiatives in different organizations. These support both the method and the assertion that value system alignment may be an important factor in the success of organizational change initiatives. The article concludes with recommendations for further research.
Journalize the entries for the following transactions:
Mar. 1 Established a petty cash fund of $771.
31 The amount of cash in the petty cash fund is now $632. The fund is replenished based on the following receipts: office supplies, $33 selling expenses, $113.
Record any discrepancy in the cash short and over account. If an amount box does not require an entry, leave it blank.
Answer:
Mar 1
Dr Petty Cash $771.00
Cr Cash $771.00
Mar 31
Dr Office Supplies $33.00
Dr Selling Expenses 113.00
Cr Cash Short and Over $27.00
Cr Cash $119.00
Explanation:
Preparation of the entry to Record any discrepancy in the cash short and over account.
Mar 1
Dr Petty Cash $771.00
Cr Cash $771.00
(To record petty cash)
Mar 31
Dr Office Supplies $33.00
Dr Selling Expenses 113.00
Cr Cash Short and Over $27.00
[($33+$133+$632)-$771]
Cr Cash $119.00
(33+$133-$27)
(To Record discrepancy in the cash short and over account)
Dennis Rodman has a $5,000 debt balance on his Visa card that charges 10. 7 percent compounded monthly. Dennis's current minimum monthly payment is 5 perent of his debt balance, which is $250.
How many months (round up) will it take Dennis to pay off his credit card if he pays the current minimum payment of $250 at the end of each month?
How many months will it take Dennis to pay off his credit card?
Answer: 22.13 months
Explanation:
The number of months that it will take Dennis to pay off his credit card will be calculated thus:
Balance amount = $5000
Monthly payment = $250
Interest rate = 10.7%/12 = 0.89%
The number of months will be:
= NPER(0.89, -250, 5000, 0).
= 22.13 months
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product are:
Answer:
1. The correct option is C. 54.
2. The correct option is E. 60.
3. The correct option is A. 3.
4. The correct option is E. 90%.
5. The correct option is E. y.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product:
Task Time (sec) Immediate Predecessor
u 30 none
v 30 u
w 6 u
x 12 w
y 54 x
z 30 v, y
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
A. 162
B. 72
C. 54
D. 12
E. 60
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
A. 162
B. 72
C. 54
D. 12
E. 60
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
A. 3
B. 4
C. 5
D. 6
E. 7
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
A. 100%
B. 92.5%
C. 75%
D. 87.5%
E. 90%
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
A. u
B. v
C. w
D. x
E. y
The explanation of the answers is now provided as follows:
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
The minimum cycle time is equal to the maximum task time. From the data in the question, it can be seen that the maximum task time is 54. Therefore, the correct option is C. 54. That is, the minimum possible cycle time (in seconds) for this situation is 54.
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
Desired cycle time (in seconds) = Demand rate / Number of hours per days = 480 / 8 = 60
Therefore, the correct option is E. 60.
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
Total task time = 30 + 30 + 6 + 12 + 54 + 30 = 162
Minimum possible cycle time = 54
Therefore, we have:
Minimum number of workstations needed = Total task time / Minimum possible cycle time = 162 / 54 = 3
Therefore, the correct option is A. 3.
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
Line efficiency = Total task time / (Minimum number of workstations needed * Desired cycle time) = 162 / (3 * 60) = 162 / 180 = 0.90, or 90%
Therefore, the correct option is E. 90%.
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
The last task should be the one has the longest task time. From the data table in the question, it can be observed that y is the task that has the longest task time. This implies y is the task to perform last.
Therefore, the correct option is E. y.
If Hawk Manufacturing incurs $600,000 during a joint manufacturing process before the split-off point, that $600,000 represents the
Answer:
Joint cost incurred in the process
Explanation:
In domain of accounting, a joint cost can be regarded as a cost that is been incurred in a joint process. Joint costs may encompass costs like direct material,overhead costs as well as direct labor that is been incurred during a joint production process.
joint production process can be regarded as one whereby one input give yields of multiple outputs. This process helps to automatically creates other types of output product when creating one type of output.
For instance, Joint cost when a Manufacturing company incurs $600,000 during a joint manufacturing process before the split-off point, that $600,000 represents the Joint cost .
Your company buys a computer system from IBM for $3 million and pays IBM $200,000 to install the computer system. The $3 million is on credit and your company pays $100,000 of interest on the loan in the current year. The acquisition cost of the computer system at the end of the current year will be
Answer:
$3.2 million
Explanation:
Calculation to determine what The acquisition cost of the computer system at the end of the current year will be
Using this formula
Acquisition cost=Purchase price+ Installation cost
Let plug in the morning
Acquisition cost= $3 million +$200,000
Acquisition cost=$3.2 million
Therefore The acquisition cost of the computer system at the end of the current year will be $3.2 million
How to write business proposal
A new machine requires an investment of $630,000 and will generate $100,000 in cash inflows for 7 years, at which time the salvage value of the machine will be $130,000. Using a discount rate of 10%, the net present value of the machine is $_________
Answer:
$-76,447.56
Explanation:
Net present value is the present value of after-tax cash flows from an investment less the amount invested.
NPV can be calculated using a financial calculator
Cash flow in Y0 = -630,000
Cash flow in Y1 - Y6 = 100,000
Cash flow in Y7 = 100,000 + 130,000
I = 10%
npv = $-76,447.56
To find the NPV using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
Answer:
-76,510, (76,510)
Explanation:
Crimson Tide Music Academy offers lessons in playing a wide range of musical instruments. The unadjusted trial balance as of December 31, 2021, appears below. December 31 is the company's fiscal year-end.
Accounts Debits Credits
Cash $ 10,300
Accounts Receivable 9,500
Supplies 2,000
Prepaid Rent 7,200
Equipment 90,000
Accumulated Depreciation $ 12,000
Accounts Payable 7,700
Salaries Payable 0
Interest Payable 0
Utilities Payable 0
Notes Payable 20,000
Common Stock 45,000
Retained Earnings 19,000
Service Revenue 42,200
Salaries Expense 24,500
Interest Expense 0
Rent Expense 0
Supplies Expense 0
Utilities Expense 2,400
Depreciation Expense 0
Totals $ 145,900 $ 145,900
Information necessary to prepare the year-end adjusting entries appears below.
a. Depreciation of equipment for the year is $6,000.
b. Accrued salaries at year-end should be $2,100.
c. Crimson Tide borrows $20,000 on September 1, 2018. The principal is due to be repaid in four years. Interest is payable each August 31 at an annual rate of 12%.
d. Unused supplies at year-end total $700. Crimson Tide debits Supplies at the time supplies are purchased.
e. Crimson Tide opens a second studio by paying for one year of rent in advance on April 1, 2018, for $7,200 ($600 per month) debiting Prepaid Rent.
f. Unpaid utilities for December total $200.
Required:
1) Enter the unadjusted balances from the trial balance and post the adjusting entries to the T-accounts, and post the closing entries to the T-accounts.
2) prepare an adjusted trial balance.
3a ) prepare an income statement for the year end december 31,2018.
3b) prepare a statement of sharholders equity for the year ended decmber 31,2018.
3c) prepare a classified balance sheet for the year ended december 31, 2018.
4) record the closing entries.
5) prepare a post-closing trial balance.
Answer:
asdasd sadad asd asdas 2 212 313135 54 554 dsa asd sad asa sd
Explanation:
Purple Cab Company had 57,000 shares of common stock outstanding on January 1, 2021. On April 1, 2021, the company issued 27,000 shares of common stock. The company had outstanding fully vested incentive stock options for 5,700 shares exercisable at $11 that had not been exercised by its executives. The average market price of common stock was $13. The company reported net income in the amount of $276,915 for 2021. What is the basic earnings per share (rounded)
Answer:
$3.58
Explanation:
Calculation to determine the basic earnings per share (rounded)
Using this formula
Basic earnings per share=Net income/(shares of common stock outstanding+(shares of common stock*9/12)
Let plug in the formula
Basic earnings per share=$276,915/(57,000 + (27,000 × 9/12))
Basic earnings per share=$276,915/(57,000+20,250)
Basic earnings per share=$276,915/77,250
Basic earnings per share= $3.58
(April 1 to December 31 =9 months)
Therefore Basic earnings per share is $3.58
During a risk brainstorming session a team member identifies a risk. This particular risk does not seem to belong to any of the categories in you Risk Breakdown Structure (RBS). How should you respond
Answer:
Record it in the risk register, discuss potential responses and make a note to update the RBS.
Explanation:
Risk management is the process by which the management of an organisation identifies, assessed, and controls threats that may affect the company's capital or earnings.
The risks can be as a result of natural disasters, management error, financial uncertainty, or accidents.
In the given instance if a risk is not on any of the categories in you Risk Breakdown Structure (RBS), there is need to record it in the risk register, discuss potential responses and make a note to update the RBS.
Labor productivity is?
Answer:
Workforce productivity is the amount of goods and services that a group of workers produce in a given amount of time. It is one of several types of productivity that economists measure.
From the list below, select the items that are classified as a materials activity. (You may select more than one answer. Single click the box with the question mark to produce a check mark for a correct answer and double click the box with the question mark to empty the box for a wrong answer. Any boxes left with a question mark will be automatically graded as incorrect.)
Raw materials used
Raw materials beginning inventory
Raw materials purchases
Work in process beginning inventory
Goods manufactured
Direct labor used
Factor overhead used
Answer and Explanation:
The classification is as follows:
Under Materials activity
Opening balance of Raw materials inventory
Purchase of the Raw materials purchases
Under Production activity:
OPening balance of Work-in process inventory
Raw material used
Direct labor used
Factory overhead used
Under Sales activity:
Goods manufactured
In this way it should be categorized
Hence, the same should be relevant
Which of the following is not a standard organizational structure
Question Completion with Options:
i. Line Organisation
ii. Staff Organisation
iii. Functional Organisation
iv. Committee Organisation Code
Answer:
The option that is not a standard organizational structure is:
iv. Committee Organisation Code
Explanation:
The organizational structure adopted by an entity reflects how some of its rules, roles, and responsibilities are directed between organizational levels in order to achieve its goals. The organizational structure also shows the information flows between different levels within the entity. Traditionally, organizations maintained hierarchical, functional, divisional, matrix, and flat organizational structures. Given current digitalization with its internet of things (IoT), more decentralized, network, and team-based organizational structures have emerged.
Assume a firm generates $2,500 in sales, has a $800 increase in accounts receivable and has a $500 increase in accounts payable during an accounting period. Based solely on this information, cash flow from operations will increase by:
Answer:
Cash flow from operations will increase by $2,200.
Explanation:
The amount of increase in cash flow from operations can be calculated as follows:
Increase in cash flow from operations = Sales - Increase in accounts receivable + Increase in accounts payable …………… (1)
Sales = $2,500
Increase in accounts receivable = $800
Increase in accounts payable = $500
Substituting the values into equation (1), we have:
Increase in cash flow from operations = $2,500 - $800 + $500 = $2,200
Therefore, cash flow from operations will increase by $2,200.
Coronado, Inc. reported net income of $2.95 million in 2022. Depreciation for the year was $188,800, accounts receivable decreased $413,000, and accounts payable decreased $330,400. Compute net cash provided by operating activities using the indirect method
Answer:
Net cash provided by operating activities $3,221,400
Explanation:
The computation of the net cash provided by operating activities using the indirect method is given below
cash provided by operating activities
Net income $2,950,000
Add: depreciation $188,800
Add: decrease in account receivable $413,000
Less: decrease in account payable -$330,400
Net cash provided by operating activities $3,221,400
Required information
A bank reconciliation proves the accuracy of the depositor's and the bank's records. The bank statement balance is adjusted for items such as outstanding checks and unrecorded deposits made on or before the bank statement date but not reflected on the statement. The book balance is adjusted for items such as service charges, bank collections for the depositor, and interest earned on the account. The company's bank reconciliation at June 30 included interest earned in the amount of $150. Complete the necessary journal entry .
Answer:
Date Account Title Debit Credit
June 30 Cash $150
Interest revenue $150
Explanation:
Interest earned is considered to be revenue so it will be credited to the interest revenue account.
Cash will be debited because the interest revenue increased it and assets are debited when they increase.
Yard Tools manufactures lawnmowers, weed-trimmers, and chainsaws. Its sales mix and unit contribution margin are as follows.
Sales Mix Unit Contribution Margin
Lawnmowers 20% $33
Weed-trimmers 50% $21
Chainsaws 30% $37
Yard Tools has fixed costs of $4,200,000.
Required:
Compute the number of units of each product that Yard Tools must sell in order to break even under this product mix.
Answer:
Lawnmowers’ break-even point in units = 29,787 units
Weed-trimmers’ break-even point in units = 74,468 units
Chainsaws' break-even point in units = 44,681 unit
Explanation:
Given:
Sales Mix Unit Contribution Margin
Lawnmowers 20% $33
Weed-trimmers 50% $21
Chainsaws 30% $37
The number of units of each product that Yard Tools must sell in order to break even under this product mix can be computed using Weighted-Average Contribution Margin Ratio as follows:
Weighted contribution margin = (Sales Mix of Lawnmowers * Unit Contribution Margin of Lawnmowers) + (Sales Mix of Weed-trimmers * Unit Contribution Margin of Weed-trimmers) + (Sales Mix of Chainsaws * Unit Contribution Margin of Chainsaws) = (20% * $33) + (50% * $21) + (30% * $37) = $28.20
Total break-even point in units for the company = Fixed cost / Weighted contribution margin = $4,200,000 / $28.20 = 148,936 units
Therefore, we have:
Lawnmowers’ break-even point in units = Sales Mix of Lawnmowers * Total break-even point in units for the company = 20% * 148,936 = 29,787 units
Weed-trimmers’ break-even point in units = Sales Mix of Weed-trimmers * Total break-even point in units for the company = 50% * 148,936 = 74,468 units
Chainsaw’s break-even point in units = Sales Mix of Chainsaws * Total break-even point in units for the company = 30% * 148,936 = 44,681 units
pllzzzzzzzzzzzzzzzzz
Answer:
liability risk
Explanation:
Answer:
liability risk is right opstion
MC Qu. 47 Chang Industries has... Chang Industries has 2,800 defective units of product that have already cost $14.80 each to produce. A salvage company will purchase the defective units as they are for $5.80 each. Chang's production manager reports that the defects can be corrected for $5.20 per unit, enabling them to be sold at their regular market price of $22.60. The incremental income or loss on reworking the units is:
Answer:
$32,480
Explanation:
Calculation to determine what The incremental income or loss on reworking the units is:
First step is calculate the Net benefit per unit to rework
Incremental revenue from reworking $16.80
($22.60 - $5.80)
Less Incremental cost to rework ($5.20)
Net benefit per unit to rework $11.60
Now let calculate the Incremental income from reworking
Incremental income from reworking= ($11.60 * 2,800 units)
Incremental income from reworking=$32,480
Therefore The incremental income or loss on reworking the units is:$32,480
Financial information for Forever 18 includes the following selected data: ($ in millions except share data) 2021 2020 Net income $ 160 $ 171 Dividends on preferred stock $ 22 $ 17 Average shares outstanding (in millions) 250 300 Stock price $ 11.92 $ 10.87 Required: 1-a. Calculate earnings per share in 2020 and 2021.
Answer:
Earnings per share = (Net income - Preferred dividends) / Number of shares outstanding
2020:
= (171 - 17) / 300
= $0.51 per share
2021:
= (160 - 22) / 250
= $0.55 per share
In ________ organizational cultures, more individuality is shown through the organization’s rules being less strictly applied.
Answer:
weak
Explanation:
An organizational culture can be defined as the shared norms, beliefs, assumptions and values that exist in an organization.
An ethical climate can be defined as a collection of behaviors that are considered to be acceptable and correct within an organization or business firm. Also, an ethical climate provides the human resources management of an organization with a framework or benchmark on how employee behavioral issues or ethical problems are to be managed or handled within the organization.
In weak organizational cultures, more individuality of an employee working within an organization is shown as a result of the organization’s rules being less strictly applied.
On a related note, the rules guiding an organization are generally strictly being applied in strong organizational culture.
Advantages of the corporate form include all of the following except: A. shares can be purchased in small amounts. B. ownership interests are transferrable. C. easy to raise capital. D. legal liability of its owners is unlimited.
Statement that does not describes Advantages of the corporate form is D: legal liability of its owners is unlimited.
A corporation serves as a business set up whereby the legal entity is been separated from from its owners.Advantages of this setting is that shares can be purchased in small amounts and it allows transfer of ownership interests and it is very easy to raise capital in this setting.Therefore, option D is correct.
Learn more at:
https://brainly.com/question/11810741?referrer=searchResults
Which measure of central tendency and dispersion can syafig calculate
Answer:
nominal variables
Explanation:
Which of the following combinations is ensured to increase?
please you can give any option or full question
Cost of Goods Sold, Cost of Goods Manufactured
Glenville Company has the following information for April:
Cost of direct materials used in production $41,000
Direct labor 47,000
Factory overhead 20,000
Work in process inventory, April 1 34,000
Work in process inventory, April 30 27,000
Finished goods inventory, April 1 24,000
Finished goods inventory, April 30 18,000
a. For April, determine the cost of goods manufactured. Using the data given, prepare a statement of Cost of Goods Manufactured.
b. For April, determine the cost of goods sold. Using the data given, prepare a statement of Cost of Goods Sold.
Answer and Explanation:
a. The preparation of the statement of Cost of Goods Manufactured is presented below:
Work in process inventory, April 1 34,000
Add:
Cost of direct materials used in production $41,000
Direct labor 47,000
Factory overhead 20,000
Less:
Work in process inventory, April 30 27,000
Cost of goods manufactured $115,000
b. The preparation of the statement of Cost of Goods Sold is presented below:
Finished goods inventory, April 1 24,000
Add: cost of goods manufactured $115,000
Less: Finished goods inventory, April 30 18,000
Cost of goods sold $121,000
What are the process of microeconomics?
Answer:
Microeconomics is the study of what is likely to happen (tendencies) when individuals make choices in response to changes in incentives, prices, resources, and/or methods of production. Individual actors are often grouped into microeconomic subgroups, such as buyers, sellers, and business owners.
Explanation:
Synovec Co. is growing quickly. Dividends are expected to grow at a rate of 26 percent for the next 3 years, with the growth rate falling off to a constant 7 percent thereafter. If the required return is 14 percent and the company just paid a $1.90 dividend. what is the current share price
Answer:
$46.20
Explanation:
Dividend in year 1 = 1.90 x 1.26 = 2.39
Dividend in year 2 = 1.90 x 1.26² = 3.02
Dividend in year 3 = 1.90 x 1.26³ = 3.80
Dividend in year 3 = (3.80 x 1.07) / (0.14 - 0.07) = 58.10
Calculate the present value of these dividends
Present value is the sum of discounted cash flows
Present value can be calculated using a financial calculator
Cash flow in year 1 = 2.39
Cash flow in year 1 = 3.02
Cash flow in year 1 = 3.80 + 58.10
I = 14
PV = $46.20
To determine PV using a financial calculator take the following steps:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
Samir is a self-employed marketing consultant. He had no income from January through March 2020. His April through December 2020 income subject to SE tax is $55,000.
Samir's SE tax for 2020 is $7,771 [$55,000 x 0.9235 x 0.153 = $7,771]. Samir may reduce his estimated tax payments by how much? Hint: USE Form Schedule SE to help you find the answer.
Answer:
$3,886
Explanation:
Since SELF EMPLOYMENT TAX is 15.3% of your wages which is why the Internal Revenue Service (IRS) make it possible for you to deduct your employer equal portion of your self employment taxes that the employer pays during the year which is 7.65% Calculated as (15.3%/2) which therefore means that Samir may reduce his ESTIMATED TAX PAYMENTS by $3,886 [$55,000 x 0.9235 x 0.0765 = $3,886] while the remaining 7.65%( 15.3% -7.65%) are not deductible because they correspond to employee taxes.
Therefore he may reduce his ESTIMATED TAX PAYMENTS by $3,886.
In the Month of March, Chester received orders of 81 units at a price of $15.00 for their product Creak. Chester uses the accrual method of accounting and offers 30 day credit terms. Chester delivers 81 units in April. They received payment for 41 units in March, and 41 units in April. In the March income statement, how much revenue is recognized on the March income statement from this order
Answer:
Chester Corporation
Revenue for March Income Statement for this order = $0
Revenue for April Income Statement for this order = $1,215
Explanation:
a) Data and Calculations:
March: orders of 81 units at a price of $15 received = $1,215
Credit terms = 30 days
April, delivery of 81 units
March, payment for 41 units received
April, payment for 41 units received
In the March income statement, no revenue is recognized on the March Income Statement from this order because the delivery is for April. All revenue will be accounted for in April.
At the beginning of the period, the Cutting Department budgeted direct labor of $125,000, direct materials of $151,000 and fixed factory overhead of $11,800 for 8,000 hours of production. The department actually completed 10,600 hours of production. What is the appropriate total budget for the department, assuming it uses flexible budgeting? Round hourly rates to two decimal places. Round interim calculations to two decimal places. Round your final answer to the nearest dollar. a.$381,335 b.$377,606 c.$291,635 d.$287,800
Answer:
the appropriate total budget should be $377,500
Explanation:
The computation of the appropriate total budget should be given below:
Direct material ($151,000 ÷ 8,000 × 10,600) $200,075
direct labor ($125,000 ÷ 8,000 × 10,600) $165,625
fixed factory overhead $11,800
Total budget cost 377,500
Hence, the appropriate total budget should be $377,500
This is the answer but the same is not provided in the given options