How to do q solution, qrxn, moles of Mg , and delta Hrxn?

Answer:

One carbon atom and the nitrogen atom have nonzero formal charges.

Explanation:

The compound Acetonitrile has sixteen valence electrons as is easily San from its structure. It contains a carbon nitrogen triple bond with a lone pair of electrons on nitrogen. All atoms satisfy the octet rule and there is no hyper valent atom in the molecule.

The formal charge an carbon and nitrogen is calculated as follows;

No. of valence electron on atom - [non bonded electrons + no. of bonds]

Therefore, for carbon and nitrogen, we have;

formal charge on carbon = 4 - (0 + 4) = 0

formal charge on nitrogen = 5 - (2 + 3) = 0

Hence carbon and nitrogen both possess zero formal charges.

Answer:

A precipitate will form.

[Ag⁺] = 2.8x10⁻⁵M

Explanation:

When Ag⁺ and CrO₄²⁻ are in solution, Ag₂CrO₄(s) is produced thus:

Ag₂CrO₄(s) ⇄ 2 Ag⁺(aq) + CrO₄²⁻(aq)

Ksp is defined as:

Ksp = 1.1x10⁻¹² = [Ag⁺]² [CrO₄²⁻]

Where the concentrations [] are in equilibrium

Reaction quotient, Q, is defined as:

Q = [Ag⁺]² [CrO₄²⁻]

Where the concentrations [] are the actual concentrations

If Q < Ksp, no precipitate will form, if Q >= Ksp, a precipitate will form,

The actual concentrations are -Where 500mL is the total volume of the solution-:

[Ag⁺] = [AgNO₃] = 0.12M ₓ (250mL / 500mL) = 0.06M

[CrO₄²⁻] = [Na₂CrO₄] = 0.33M × (250mL / 500mL) = 0.165M

And Q = [0.06M]² [0.165M] = 5.94x10⁻⁴

As Q > Ksp; a precipitate will form

In equilibrium, some Ag⁺ and some CrO₄⁻ reacts decreasing its concentration until the system reaches equilibrium. Equilibrium concentrations will be:

[Ag⁺] = 0.06M - 2X

[CrO₄²⁻] = 0.165M - X

Where X is defined as the reaction coordinate

Replacing in Ksp expression:

1.1x10⁻¹² = [0.06M - 2X]² [0.165M - X]

Solving for X:

X = 0.165M → False solution. Produce negative concentrations.

X = 0.0299986M

Replacing, equilibrium concentrations are:

[Ag⁺] = 0.06M - 2(0.0299986M)

[CrO₄²⁻] = 0.165M - 0.0299986M

[CrO₄²⁻] = 0.135M

Answer:The concentration of the unknown HNO3 solution = 0.01809 M

Explanation:

For the acid-base reaction,  HNO3 + NaOH-----> NaN03 + H20

we have that

C1 V1 = C2 V2

Where ,

C1 = concentration of HNO3=?

V1 = volume of HNO3 = 25.00 mL,

V2 = volume of NaOH = 22.62 mL,  

C2 = concentration of NaOH = 0.02000 M

Therefore ,

25.00 mL x C1 = 22.62 mL x 0.02000 M    

 = (22.62 mL / 25.00 mL) x 0.02000 M = 0.01809 M

The concentration of the unknown HNO3 solution = 0.01809 M

Explanation:

free your mind drink water and go outside take fresh air you will get answers

Answer:

Pb + 2H2O --> PbO2 + 2H2

Explanation:

Products:

Solid metal; PbO2

Hydrogen; H

Reactants:

Metal; Pb

Steam; H2O

Reactants --> Products

Pb + H2O --> PbO2 + H2

Upon balancing we have;

Pb + 2H2O --> PbO2 + 2H2

Answer:

A. Rank the following substances in order of decreasing standard molar entropy (S∘).

Rank the gases from largest to smallest standard molar entropy

I2(g)>Br2(g)>Cl2(g)>F2(g)

B. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

H2O2(g)>H2S(g) >H2O(g)

C. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

C(s, amorphous) >C(s, graphite)>C(s, diamond)

Explanation:

Hello,

In this case, we can apply the following principles to explain the order:

- The greater the molar mass, the larger the standard molar entropy.

- The greater the molar mass and the structural complexity, the larger the standard molar entropy.

- The greater the structural complexity, the larger the standard molar entropy.

A. Rank the following substances in order of decreasing standard molar entropy (S∘).

Rank the gases from largest to smallest standard molar entropy

I2(g)>Br2(g)>Cl2(g)>F2(g)

This is due to the fact that the greater the molar mass, the larger the standard molar entropy.

B. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

H2O2(g)>H2S(g) >H2O(g)

This is due to the fact that the greater the molar mass and the structural complexity, the larger the standard molar entropy as the hydrogen peroxide has four bonds and weights 34 g/mol as well as hydrogen sulfide that has two bonds only.

C. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

C(s, amorphous) >C(s, graphite)>C(s, diamond)

Since the molecular complexity is greater in the amorphous carbon (messy arrangement), mid in the graphite and lower in the diamond (well organized).

Regards.

Answer:

c

Explanation:

it's found inside the atomic nucleus

Answer:

0.8261 M.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

HC2H3O2 + NaOH —> NaC2H3O2 + H2O

From the balanced equation above, we obtained the following:

Mole ratio of the acid, HC2H3O2 (nA) = 1

Mole ratio of the base, NaOH (nB) = 1

Data obtained from the question include the following:

Volume of acid, HC2H3O2 (Va) = 10 mL

Molarity of acid, HC2H3O2 (Ma) =..?

Volume of base, NaOH (Vb) = 16.95 mL Molarity of base, NaOH (Mb) = 0.4874 M

Finally, we shall determine the molarity of the acid solution, as follow:

MaVa/MbVb = nA/nB

Ma x 10 / 0.4874 x 16.95 = 1

Cross multiply

Ma x 10 = 0.4874 x 16.95

Divide both side by 10

Ma = (0.4874 x 16.95) /10

Ma = 0.8261 M.

Therefore, the molarity of the vinegar solution (HC2H3O2) is 0.8261 M.

Answer:

Amount of salt in 1 L seawater = 34 g

Explanation:

According to Archimedes' principle, mass of freshwater and cup = mass of equal volume of seawater

mass of freshwater = density * volume

1 cm³ = 1 mL

mass of freshwater = 0.999 g/cm³ * 735 cm³ = 734.265 g

mass of freshwater + cup = 734.265 + 25 = 759.265 g

Therefore,  mass of equal volume of seawater = 759.265 g

Volume of seawater displaced = 735 mL = 0.735 L (assuming the cup volume is negligible)

1 liter = 1000 cm³ = 1000 mL;

Density of seawater = mass / volume

Density of seawater = 759.265 g / 0.735 L = 1033.01 g/L

Density of freshwater in g/L = 0.999 g/ (1/1000) L = 999 g/L

mass of 1 Liter seawater = 1033.01 g

mass of 1 Liter freshwater = 999 g

mass of salt dissolved in 1 L of seawater = 1033.01 g - 999 g = 34.01 g

Therefore, amount of salt in 1 L seawater = 34 g

Answer:

0.0630

Explanation:

The molar mass of urea = 60 g/mol

we all know that:

[tex]\mathtt{number \ of \ moles = \dfrac{mass }{molar \ mass}}[/tex]

Then; the number of moles of urea

= [tex]\mathtt{\dfrac{4.0 \ g}{60 \ g/mol}}[/tex]

= 0.0667 mol

Similarly; the number of moles of methanol

= [tex]\mathtt{\dfrac{32 \ g}{32.04 \ g/mol}}[/tex]

= 0.9988 mol

The total number of moles = (0.0667 + 0.9988) mol

= 1.0655 mol

Finally,the mole fraction of urea  [tex]\mathtt{(X_{urea})}[/tex] = [tex]\mathtt{\dfrac{ n_{urea}}{(n_{urea}+n_{methanol})}}[/tex]

[tex]\mathtt{(X_{urea})}[/tex] = [tex]\mathtt{\dfrac{0.0667 \ mole}{1.0655 \ mole}}[/tex]

= 0.0630

Answer:

The amount of heat that is absorbed when 3.11 g of water boils at atmospheric pressure is 7.026 kJ.

Explanation:

A molar heat of vaporization of 40.66 kJ / mol means that 40.66 kJ of heat needs to be supplied to boil 1 mol of water at its normal boiling point.

To know the amount of heat that is absorbed when 3.11 g of water boils at atmospheric pressure, the number of moles represented by 3.11 g of water is necessary. Being:

the molar mass of water is:

H₂O= 2* 1 g/mole + 16 g/mole= 18 g/mole

So: if 18 grams of water are contained in 1 mole, 3.11 grams of water in how many moles are present?

[tex]moles of water=\frac{3.11 grams*1 mole}{18 gramos}[/tex]

moles of water= 0.1728

Finally, the following rule of three can be applied: if to boil 1 mole of water at its boiling point it is necessary to supply 40.66 kJ of heat, to boil 0.1728 moles of water, how much heat is necessary to supply?

[tex]heat=\frac{0.1728 moles*40.66 kJ}{1 mole}[/tex]

heat= 7.026 kJ

The amount of heat that is absorbed when 3.11 g of water boils at atmospheric pressure is 7.026 kJ.

Answer:

2,2,3,3-tetrapropyloxirane

Explanation:

In this case, we have to know first the alkene that will react with the peroxyacid. So:

What do we know about the unknown alkene?

We know the product of the ozonolysis reaction (see figure 1). This reaction is an oxidative rupture reaction. Therefore, the double bond will be broken and we have to replace the carbons on each side of the double bond by oxygens. If [tex](CH_3CH_2CH_2)_2C=O[/tex] is the only product we will have a symmetric molecule in this case 4,5-dipropyloct-4-ene.

What is the product with the peroxyacid?

This compound in the presence of alkenes will produce peroxides. Therefore we have to put a peroxide group in the carbons where the double bond was placed. So, we will have as product 2,2,3,3-tetrapropyloxirane. (see figure 2)

Answer:

True

Explanation:

The percentage by mass of a substance in a solution can be calculated by dividing the mass of the substance dissolved in the solution by the total mass of the solution. This can be expressed mathematically as:

Percentage by mass = mass of substance in solution/mass of solution x 100

In this case;

mass of KBr = 4.34 grams

mass of water = 17.4 grams

mass of solution = mass of KBr + mass of water = 4.34 + 17.4 = 21.74

Percentage by mass of KBr = 4.34/21.74 x 100

                                              = 19.96 %

19.96 is approximately 20%.

Hence, the statement is true.

Answer:12.9e-12g or in short 12.9pg

Explanation:as p=1e-12

Answer:

Weight 0.4326 g of sodium bicarbonate and 0.5141 g of sodium carbonate, dissolve it in distilled water and then bring the solution to a final volume of 50.0 mL using distilled water.

Explanation:

The pH of a buffered solution can be calculated using the Henderson-Hasselbalch equation:

[tex] pH = pKa + log(\frac{[Na_{2}CO_{3}]}{[NaHCO_{3}]}) [/tex]  

We have that pH = 10.3 and the Ka is 4.7x10⁻¹¹, so:

[tex] 10.3 = -log(4.7 \cdot 10^{-11}) + log(\frac{[Na_{2}CO_{3}]}{[NaHCO_{3}]}) [/tex]  

[tex] \frac{[Na_{2}CO_{3}]}{[NaHCO_{3}]} = 0.94 [/tex]  (1)

Also, we know that:

[tex] [Na_{2}CO_{3}] + [NaHCO_{3}] = 0.20 M [/tex]    (2)

From equation (2) we have:

[tex] [Na_{2}CO_{3}] = 0.20 - [NaHCO_{3}] [/tex]   (3)

By entering (3) into (1):

[tex] \frac{0.20 - [NaHCO_{3}]}{[NaHCO_{3}]} = 0.94 [/tex]

[tex] 0.94*[NaHCO_{3}] + [NaHCO_{3}] = 0.20 [/tex]

[tex] [NaHCO_{3}] = 0.103 M [/tex]  

Hence, the [Na_{2}CO_{3}] is:

[tex] [Na_{2}CO_{3}] = 0.20 - [NaHCO_{3}] = 0.20 M - 0.103 M = 0.097 M [/tex]  

Now, having the concentrations and knowing the volume of the buffer solution we can find the mass of the sodium carbonate and the sodium bicarbonate, as follows:

[tex]m_{Na_{2}CO_{3}} = C*V*M = 0.097 mol/L*0.050 L*105.99 g/mol = 0.5141 g[/tex]

[tex]m_{NaHCO_{3}} = C*V*M = 0.103 mol/L*0.050 L*84.007 g/mol = 0.4326 g[/tex]

Therefore, to prepare 50.0 mL of a 0.20 M solution that is buffered to a pH of 10.3 we need to weight 0.4326 g of sodium bicarbonate and 0.5141 g of sodium carbonate, dissolve it in distilled water and then bring the solution to a final volume of 50.0 mL using distilled water.      

I hope it helps you!

Answer:

Due to the resonance structures

Explanation:

In the question:

"Explain why, when the guanidino group of arginine is protonated, the double-bonded nitrogen is the nitrogen that accepts the proton. There is a scheme of a reversible reaction, where one equivalent of the reactant reacts with two equivalents of H plus"

We have to take into account the structure of the amino acid arginine. In which, we have the amino and the carboxylic groups in the right and the guanidine group in the left.

In this group, we have a central carbon with three nitrogen atoms around and a double bond with the nitrogen on the top. This nitrogen on the top will accept the proton because the structure produced will have a positive charge on this nitrogen. Then, the double bond with the carbon can be delocalized into the nitrogen producing a positive charge in the carbon.

In this structure (the carbocation), we can have several resonance structures. In the blue option, we can produce a double bond with the nitrogen on the right. In the purple option, we can produce a double bond with the nitrogen on the left.

In conclusion, if the nitrogen in the top on the guanidine group accepts an hydrogen atom and we will have several resonance structures that can stabilize the molecule. Due to this, the nitrogen in the top its the best option to accept hydrogens.

See figure 1

I hope it helps!

Answer:

There are required 70.1 years for the activity of a sample of cesium-137 to fall to 20.0 percent of its original value

Explanation:

The radioactive decay follows always first-order kinetics where its general law is:

Ln[A] = -Kt + ln[A]₀

Where [A] is actual concentration of the atom, k is rate constant, t is time and [A]₀ is initial concentration.

We can find rate constant from half-life as follows:

Rate constant:

t(1/2) = ln 2 / K

As half-life of Cesium-137 is 30.2 years:

30.2 years = ln 2 / K

K = 0.02295 years⁻¹

Replacing this result and with the given data of the problem:

Ln[A] = -Kt + ln[A]₀

Ln[A] = -0.02295 years⁻¹* t + ln[A]₀

Ln ([A] / [A₀]) = -0.02295 years⁻¹* t

As you want time when [A] is 20% of [A]₀, [A] / [A]₀ = 0.2:

Ln (0.2) = -0.02295 years⁻¹* t

70.1 years = t

Answer:

Lime water, [tex]Ca(OH)_{2}_({aq} )[/tex] is formed.

Explanation:

Lime-water is a clear and colourless dilute solution of aqueous calcium hydroxide salt.

Small amounts of calcium hydroxide salt,  [tex]Ca(OH)_{2}_(s)[/tex]  is sparsely soluble at room temperature when dispersed vigorously. if in excess, a white suspension called 'milk of lime'is formed.

I hope this explanation is helpful.

Answer:

The correct answer is 1332 KJ.

Explanation:

Based on the given information,  

ΔH°f of C2H4 is 51.9 KJ/mol, ΔH°O2 is 0.0 KJ/mol, ΔH°f of CO2 is -394 KJ/mol, and ΔH°f of H2O is -286 KJ/mol.  

Now the balanced equation is:  

C2H4 (g) + 3O2 (g) ⇔ 2CO2 (g) + 2H2O (l)

ΔH°rxn = 2 × ΔH°f CO2 + 2 × ΔH°fH2O - 1 × ΔH°fC2H4 - 3×ΔH°fO2

ΔH°rxn = 2 (-394) + 2(-286) - 1(51.9) - 3(0)

ΔH°rxn = -1411.9 KJ

Now, the given ΔS°f of C2H4 is 219.8 J/mol.K, ΔS°f of O2 is 205 J/mol.K, ΔS°f of CO2 is 213.6 J/mol.K, and ΔS°f of H2O is 69.96 J/mol.K.  

Now based on the balanced chemical reaction,  

ΔS°rxn = 2 × ΔS°fCO2 + 2 ΔS°fH2O - 1 × ΔS°f C2H4 - 3 ΔS°fO2

ΔS°rxn = 2 (213.6) + 2(69.96) - 1(219.8) -3(205)

ΔS°rxn = -267.68 J/K or -0.26768 KJ/K

T = 25 °C or 298 K

Now putting the values of ΔH, ΔS and T in the equation ΔG = ΔH-TΔS, we get

ΔG = -1411.9 - 298.0 × (-0.2677)

ΔG = -1332 KJ.  

Thus, the maximum work, which can obtained is 1332 kJ.  

Answer:

2 Na(s) + C(s) + 3/2 O₂(g) → Na₂CO₃(s)

Explanation:

The molar enthalpy of formation of a chemical is defined as the change in enthalpy during the formation of 1 mole of the substance from its constituent elements (Constituent elements are pure elements you have in the periodic table)

For Na₂CO₃ constituent elements are Na(s), C(s) and O₂(g) and the chemical equation that represents the molar enthalpy is:

Answer:

8.05 moles

Explanation:

5.50 / 2.954 = x / 4.325

x = 8.05

According to ideal gas equation, if the temperature and pressure stay constant during the process 0.520 moles have been added  so that the balloon expands to 4.325 L.

The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.The law was proposed by Benoit Paul Emile Clapeyron in 1834.

In the given example if pressure and temperature are constant then V=nR substituting V=4.325 l and R=8.314  so n=V/R=4.325/8.314=0.520 moles.

Thus, 0.520 moles of helium are added if the temperature and pressure stay constant during this process.

Learn more about ideal gas equation,here:

https://brainly.com/question/28837405

#SPJ2

Answer:

Ka = 6.15x10⁻⁷

Explanation:

Ka is defined as dissociation constant in the equilibrium of a weak acid with water. The general reaction is:

HA(aq) + H₂O(l) ⇆ H₃O⁺(aq) + A⁻(aq)

And Ka is defined as the ratio between molar concentrations in equilibrium of products over reactants as follows:

Ka = [H₃O⁺] [A⁻] / [HA]

You don't take water in the equilibrium beacuse is a pure liquid

Replacing with the concentrations of the problem:

Ka = [H₃O⁺] [A⁻] / [HA]

Ka = [4.00x10⁻⁴] [4.00x10⁻⁴] / [0.260]

Answer:

0.9718M

Explanation:

Rate constant, k =  0.255 M-1s-1

time, t = 8.00 s

Initial concentration, [A]o = 1.33 M

Final concentration, [A] = ?

These quantities are represented by the equation;

1 / [A] = 1 / [A]o + kt

1 / [A] = 1 /1.33 + (0.255 * 8)

1 / [A] = 0.7519 + 2.04

[A] = 1 / 2.7919 = 0.3582 M

How much of NO2 decomposed is obtained from the change in concentration;

Change in concentration = Initial - Final

Change = 1.33 - 0.3582 = 0.9718M

A 1.89 pints of blood would contain 873 grams of platelets.

To calculate the amount of platelets present in 1.89 pints, it is first necessary to transform this unit of volume into liters:

                                  [tex]1.89 \times 473.2 = 894.3 mL[/tex]

                                         [tex]\frac{894.3}{1000}= 0.84L[/tex]

Now, just calculate the amount of platelets present in 0.84L:

                                    [tex]\frac{1.04\times10^{3}g}{xg}=\frac{1L}{0.84L}[/tex]

                                       x = 873 grams

So, a 1.89 pints of blood would contain 873 grams of platelets.

Learn more about transformation of units in: brainly.com/question/10667910

Answer:

1. the siren has a lower pitch to Jane

2. the siren has a higher pitch to John

3. sound different due to moving away from Jane making the sound wave lengths longer and moving toward John making the wave lengths shorter

Explanation:

The Doppler effect expresses that sound is comparative with the spectator or observer. This is demonstrated valid by the model given with Jane and John. To one individual it could sound low and to someone else it could sound high, in light of where they are tuning in from. To John, the police alarm playing is a higher pitch. Be that as it may, to Jane this equivalent alarm is a totally extraordinary pitch and is heard lower than in comparison to the john.

This is a prime case of the Doppler Effect. They sound distinctive on the grounds that the sound is moving far from Jane making the sound frequencies longer and it is advancing toward John making the frequencies shorter. This impacts how the sound is heard by the human ear.

Answer: 2. Dalton Model

Explanation:

John Dalton proposed that atoms are indivisible spheres. Although his model of an atom was not entirely new to the scientific world since the ancient Greeks has made  a similar statement in the past ( all matter are made up of small indivisible particle called atom).

As of when Dalton proposed his model of an atom, electrons and nucleus where yet to be discovered.

Answer:

There are no forces holding the gas particles together.

Explanation:

Answer: So other scientist can replicate the experiment and see if they get the same results in other words, test reliability.

Explanation:

Answer:

W = 278.64375 Joules

Explanation:

The information given in this problem are;

Initial volume = 0L

Final volume = 2.50L

ΔV = 2.50 - 0 = 2.50 L

External pressure, P =  1.10 atm

Work = ?

These parameters are related by the equation;

w = - P ΔV

W = - (1.10 )(2.50)

W = 2.75 L atm

Upon conversion to joules;

1 liter atmosphere is equal to 101.325 joule

W = 278.64375 Joules