Answer:
so 0.15 moles X 22.4 dm3/mole=3.36 dm3. Next we find the moles of hexane combusted, and then the moles of CO2. Finally, we find the volume of CO2 using the fact that at STP, 1 mole of gas = 22.4 dm3.
Describe how you would prepare your assigned ester from a carboxylic acid and an alcohol. You do not need to include a detailed procedure, but you should include any necessary reagents or catalyst (solvents are not needed).
Answer:
The general preparation of esters( for example ethyl ethanoate) is through a process known as ESTERIFICATION.
Explanation:
The formation of an ester by the reaction between an alkanol and an acid is known as esterification. This reaction is extremely slow and reversible at room temperature, and is catalyzed by a high concentration of hydrogen ions.
In the preparation of one of the simpler esters known as ETHYL ETHANOATE the reactants include ethanol(an alcohol) and glacial ethanoic acid(a carboxylic acid) in the presence of concentrated tetraoxosulphate VI acid as a CATALYST. Note that, a catalyst is any substance that is able to increase the rate of a chemical reaction.
The mixture is warmed in a water bath( hot but not boiling) for about 25 minutes. The mixture is poured into a beaker partially filled with a sodium or calcium chloride to remove interacted ethanol. The ethyl ETHANOATE floats on the mixture as oily globules.
How many atoms in each elemental sample?
4.9 mol Cu
5.4•10^-3 Mol C
24.0 Mol Hg
0.160 mol Na
Answer:
2.9 × 10²⁴ atoms Cu; 3.3 × 10²¹ atoms C; 1.44 × 10²⁵ atoms Hg; 9.63 × 10²² atoms Na
Explanation:
To convert moles to atoms, we need a conversion factor: Avogadro's number. There are 6.02 × 10²³ atoms in 1 mole of atoms.
4.9 mol Cu × 6.02 × 10²³ atoms Cu/1 mol Cu = 2.9 × 10²⁴ atoms Cu
5.4 × 10⁻³ mol C × 6.02 × 10²³ atoms C/1 mol C = 3.3 × 10²¹ atoms C
24.0 mol Hg × 6.02 × 10²³ atoms Hg/1 mol Hg = 1.44 × 10²⁵ atoms Hg
0.160 mol Na × 6.02 × 10²³ atoms Na/1 mol Na = 9.63 × 10²² atoms Na
Draw 2,3-dichloro octane
Answer:
Hi friend
I hope this image will help you if not I'm sorry
if this help you please mark me as brinalist or vote me.
Thankyou
Predict the product when 2-methylbutanol is oxidised with pyridium chlorochromate in dichloromethane (PCC/CH2C12) a. CH3CH2CH(CH3)COOH b. CH3CH2CH2CH(CH3)CHO C. CH3CH2CH(CH3)CHO d. CH3CH2CH(CH3)OH 8:40 PM Type a message
Answer:
c. CH3CH2CH(CH3)CHO
Explanation:
Hello there!
In this case, according to the process for the one-step oxidation of a primary alcohol with a moderately strong oxidizing agent like pyridinium chlorochromate (PCC), whereby an aldehyde is produced, we infer that the corresponding product will be 2-methylbutanal, which matches with the choice c. CH3CH2CH(CH3)CHO according to the following reaction:
[tex]CH_3CH_2CH(CH_3)CH_2OH\rightarrow CH_3CH_2CH(CH_3)COH[/tex]
Regards!
Which probing question lies within the scope of physics?
O A.
Are fish in the open ocean
attracted by underwater sounds?
O B.
Does increasing the saltiness of
ocean water affect the speed
of sound in the water?
O C.
What effect does the release of industrial wastewater have on
the acidity of oceans?
D. What is the effect of rising sea temperatures on
ocean currents?
Answer:
answer number C is the correct answer for this
define the following terms atom
Self-esteem and loss of control are key
factors of our mental well being.
A-True
B-False
Liquid ethyl mercaptan, C2H6S, has a density of 0.84 g/mL. Assuming that the combustion of this compound produces only CO2 , H2O, and SO2 , what masses of each of these three products would be produced in the combustion of 3.15 mL of ethyl mercaptan
Answer:
Mass CO2 = 3.75 grams
Mass H2O = 2.30 grams
Mass SO2 = 2.73 grams
Explanation:
Step 1: Data given
Density of Liquid ethyl mercaptan, C2H6S = 0.84 g/mL
Volume of ethyl mercaptan = 3.15 mL
Step 2: The reaction
2C2H6S + 9O2 → 4CO2 + 6H2O + 2SO2
Step 3: Calculate mass of ethyl mercaptan
Mass = Volume * density
Mass ethyl mercaptan = 3.15 mL * 0.84 g/mL
Mass ethyl mercaptan = 2.646 grams
Step 4: Calculate moles ethyl mercaptan
Moles = mass / molar mass
Moles ethyl mercaptan = 2.646 grams / 62.13 g/mol
Moles ethyl mercaptan = 0.04259 moles
Step 5: Calculate moles of other products
For 2 moles ethyl mercaptan we need 9 moles O2 to produce 4 moles CO2, 6 moles H2O and 2 moles SO2
For 0.04259 moles we need 0.1917 moles O2 to produce:
2*0.04259 = 0.08518 moles CO2
3*0.04259 = 0.1278 moles H2O
1*0.04259 = 0.04259 moles SO2
Step 6: Calculate mass produced
Mass = moles * molar mass
Mass CO2 = 0.08518 moles * 44.01 g/mol
Mass CO2 = 3.75 grams
Mass H2O = 0.1278 moles * 18.02 g/mol
Mass H2O = 2.30 grams
Mass SO2 = 0.04259 moles * 64.07 g/mol
Mass SO2 = 2.73 grams
A sample of Br2(g) takes 12.0 min to effuse through a membrane. How long would it take the same number of moles of Ar(g) to effuse through the same membrane
Answer:
6 mins
Explanation:
The time taken for Ar to effuse can be obtained as follow:
Time for Br₂ (t₁) = 12 mins
Molar mass of Br₂ (M₁) = 2 × 80 = 160 g/mol
Molar mass of Ar (M₂) = 40 g/mol
Time for Ar (t₂) =?
t₂/t₁= √(M₂/M₁)
t₂ / 12 = √(40/160)
Cross multiply
t₂ = 12 × √(40/160)
t₂ = 12 × 0.5
t₂ = 6 mins
Therefore, it will take 6 mins for the same amount of Ar to effused out.
Pablo, whose mass is 60 kg, is moving along at a velocity of 8 m/s. How much kinetic energy does he have?
Answer:
1920 Joules
Explanation:
* means multiply
^ means exponent
kinetic energy is in Joules or J
kinetic energy = 1/2 * mass * (velocity)^2
kinetic energy = 1/2 * 60 * (8)^2
kinetic energy = 1/2 * 60 * (8*8)
kinetic energy = 1/2 * 60 * (64)
kinetic energy = 1920 Joules or 1920 J
Answer:
KE = 1920 J
General Formulas and Concepts:
Energy
Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]
m is mass (in kg)v is velocity (in m/s)Explanation:
Step 1: Define
[Given] m = 60 kg
[Given] v = 8 m/s
Step 2: Find KE
Substitute in variables [Kinetic Energy Formula]: [tex]\displaystyle KE = \frac{1}{2}(60 \ kg)(8 \ m/s)^2[/tex]Evaluate: [tex]\displaystyle KE = 1920 \ J[/tex]Topic: AP Physics 1 Algebra-Based
Unit: Energy
plz help ASAP on my final project I will give you20$
Answer:
hey friend
how can I help you
How do forces between particles in gases compare to forces in the other states of matter?
The forces in gases are weaker than forces in solids and liquids.
Because they have more kinetic energy that overcomes the force of attraction.
g Consider two different liquids at atmospheric pressure: hexane and water. Hexane has a higher vapor pressure than water. As a result, the temperature at which hexane will boil will be [ Select ] water and its vapor pressure when it is boiling will be [ Select ] water when water is boiling.
Answer:
Lower than
Higher than
Explanation:
The vapour pressure and boiling point of liquids are inversely related. Thus, the higher the vapour pressure of a liquid, the lower it's boiling point. Lower vapour pressure implies that the liquid is easily converted into vapour phase.
If hexane has a higher vapour pressure than water then its boiling point is lower than that of water and its vapor pressure when it is boiling will be higher than water when water is boiling.
What is the gravitational potential energy of a 1500-kg truck resting on top of a 550-m hill on earth?( earth’s gravitational pull is 9.8m/s2).
Answer:
E = 8085 kJ
Explanation:
Given that,
The mass of a truck, m = 1500 kg
Height, h = 550 m
We need to find the gravitational potential energy of the truck. It can be calculated as follows :
[tex]E=mgh[/tex]
Put all the values,
[tex]E=1500\times 9.8\times 550\\\\E=8085000\ J\\\\or\\\\E=8085\ kJ[/tex]
So, the gravitational potential energy is 8085 kJ.
a 150 j of energy is added to a system that does 50 j of work is done.by how m uch will tyhe internal energy of system be raised?
The internal energy of system is raised by 3 times
I mix together 50.0 mL of 0.100 M NaIO3, 50.00 mL of 0.100 M NaOH, and 10.0 mL of 0.100 M HIO3. What is the pH of the mixture
Answer:
pH = 12.66
Explanation:
The HIO3 reacts with NaOH as follows:
HIO3 + NaOH → H2O + NaIO3
The moles of HIO3 and NaOH added are:
Moles HIO3:
0.0100L * (0.100mol / L) = 0.00100 moles HIO3
Moles NaOH:
0.05000L * (0.100mol / L) = 0.00500 moles NaOH
As moles NaOH > Moles HIO3, the moles of NaOH that remain are:
0.00500mol - 0.00100mol = 0.00400 moles NaOH.
After the reaction you will have only NaOH and NaIO3. As NaIO3 is a salt, the pH of the solution is determined by only NaOH. Its concentration is:
Moles NaOH: 0.00500 moles NaOH
Volume: 50.0mL + 50.0mL + 10.0mL = 110.0mL = 0.110L
Molarity: 0.0455M NaOH = [OH-]
pOH = -log [OH-] = 1.34
pH = 14 - pOH
pH = 12.66pH is the measure of the hydrogen or the hydronium ion in an aqueous solution. The pH of the mixture containing sodium hydroxide is 12.66.
What is pH?pH is the potential of the hydrogen and is given as a negative log of the hydrogen concentration in the aqueous solution.
The balanced chemical reaction can be shown as:
[tex]\rm HIO_{3} + NaOH \rightarrow H_{2}O + NaIO_{3}[/tex]
Moles of iodic acid are calculated as:
[tex]\begin{aligned} \rm moles &= \rm molarity \times volume\\\\&= 0.100 \;\rm M \times 0.0100 \;\rm L \\\\&= 0.00100\;\rm moles\end{aligned}[/tex]
Moles of sodium hydroxide are calculated as:
[tex]\begin{aligned} \rm moles &= \rm molarity \times volume\\\\&= 0.100 \;\rm M \times 0.05000 \;\rm L \\\\&= 0.00500\;\rm moles\end{aligned}[/tex]
The remaining moles of sodium hydroxide are 0.00500mol - 0.00100mol = 0.00400 moles.
The pH of the mixture will be determined by sodium hydroxide, as sodium iodate is a salt.
The molar concentration of sodium hydroxide is calculated as:
[tex]\begin{aligned} \rm M &= \rm \dfrac{moles}{volume}\\\\&= \dfrac{0.00500}{0.110}\\\\&= 0.0455 \;\rm M\end{aligned}[/tex]
pH is calculated as:
[tex]\begin{aligned} \rm pOH &= \rm -log[OH^{-}] = 1.34\\\\\rm pH &= \rm 14 - pOH\\\\\rm pH &= 12.66\end{aligned}[/tex]
Therefore, 12.66 is the pH of the mixture.
Learn more about pH here:
https://brainly.com/question/13539106
Which procedure could a student use to examine an intensive property of a rectangular block of wood
Find the mass.
Record the length. Measure the volume. Determine the density.
Answer:
density
Explanation:
The procedure that the student could use to examine an intensive property of a rectangular block of wood is to determine its density. Density is intensive because it is the ration between the mass and the volume.
Answer: find the mass option A
Explanation:
what type of properties change ina physical change? Give an example to support your answer?
pls quick who will give the answer first will get the brainliest
Explanation:
We can observe some physical properties, such as density and color, without changing the physical state of the matter observed. Other physical properties, such as the melting temperature of iron or the freezing temperature of water, can only be observed as matter undergoes. A physical change physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.hope it helps.stay safe healthy and happy.Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
i think 1. law of muliple proportion
Explanation:
please like
Which statement is true about molarity and percent by mass? (3 points)
They have the same unit.
They are inversely related.
They are different units of dilution.
They are different units of concentration.
Answer:
The guy above used photoshop here is the actual answer.
Explanation:
The true statements about molarity and percent by mass is that they are the different units of concentration
What is concentration?Concentration of any substance present in any solution guves idea about their relative amount in that and it can de described in terms of molarity and percent by mass.
Molarity is define as the moles of solute present in per unit volume of the solution and has a unit of mol/L.Percent by mass is define as the mass of solute present in total mass of solution and it is a unit less quantity.They both gives idea about the concentration, not of the dillutions.They are not inversely related else they are directly related to each other as they are depends on the moles or mass of solute.Hence, molarity and percent by mass are the different units of concentration and directly related to each other.
To know more about molarity & percent mass, visit the below link:
https://brainly.com/question/26150306
Nickel + oxygen = nickel oxide. What is the balanced redox reaction?
Answer:
This is an oxidation-reduction (redox) reaction:
2 Ni0 - 4 e- → 2 NiII
(oxidation)
2 O0 + 4 e- → 2 O-II
(reduction)
Ni is a reducing agent, O2 is an oxidizing agent.
Methanol has the formula CH3OH. What is the predominant intermolecular force between methanol molecules?
ANSWER:
dispersion forces
dipole forces
ionic bonds
hydrogen bonds
Answer:
hydrogen bonds
Explanation:
similarly CH3OH also has a OH group and H hydrogen thus it will also form h-bonding.
Classify each of the following as a strong acid or a weak acid and indicate how each should be written in aqueous solution. Classify ... In solution this acid should be written as: weak 1. hydrocyanic acid H3O CN- _______ 2. hydrobromic acid
Answer:
HCN, weak acid
H⁺, Br⁻, strong acid
Explanation:
Hydrocyanic acid is a weak acid, according to the following equation.
HCN(aq) ⇄ H⁺(aq) + CN⁻(aq)
Thus, it should be written in the undissociated form (HCN).
Hydrobromic acid is a strong acid, according to the following equation.
HBr(aq) ⇒ H⁺(aq) + Br⁻(aq)
Thus, it should be written in the ionic form (H⁺, Br⁻).
What types of house are found in very cold regions
Answer:
the house found in a very cold are Igloos or the ice house
A major component of gasoline is octane when octane is burned in air it chemically reacts with oxygen to produce carbon dioxide and water what mass of carbon dioxide is produced by the reaction of oxygen
gasoline is the chemical that is coming out of the air
A 250 mL sample of gas at 1.00 atm and has the temperature increased to and the volume increased to 500 mL. What is the new pressure
Answer:
0.53atm = P2
Explanation:
Gas at 1.00atm and 20°C. Temperature increased to 40°C...
We can solve this question using combined gas law:
P1*V1 / T1 = P2*V2 / T2
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state.
Compunting the values of the problem:
P1 = 1.00atm
V1 = 250mL
T1 = 20°C + 273.15 = 293.15K
P2 = ?
V2 = 500mL
T2 = 40°C + 273.15 = 313.15K
1.00atm*250mL / 293.15K = P2*500mL / 313.15K
0.53atm = P2
important of organic chemistry in our daily life
Answer:
Human life has become very simple by using organic chemicals. The importance of organic chemicals in the daily life and industrial area can be explained as follows. (i) Food Vitamins, proteins, sugar, flour, fats etc. ... (ii) Agriculture is an important place for organic chemical for the growth of agricultural production.
I need help with the practice question at the bottom. Thank you.
As the gas expands on the surrounding, work is done by the system.
Therefore, W= -279J
Absorbtion of heat,q= +216J
∆U=q+W = (216-279)J= -63J
Which of the five type of equilibrium problems best applies to this question: Consider the following reaction at equilibrium. What effect will reducing the volume of the reaction mixture have on the system
Answer:
d
Explanation:
An unknown compound's 2,4-DNP product melting range is between 144-146'C. It does not give a silver mirror on the Tollens test and is slow to react to the chromic acid test. What would this compound be
Answer:
An unknown compound's 2,4-DNP product melting range is between 144-146'C. It does not give a silver mirror on the Tollens test and is slow to react to the chromic acid test. What would this compound be
Explanation:
From the given data it is clear that the unknown compound gives positive test with 2,4-DNP reagent.
That means it has a carbonyl group.Either aldehyde or ketone.
It does not give a silver mirror on the Tollens test and is slow to react to the chromic acid test.
That means aldehyde is absent.
So, the other carbonyl group that is ketone is present in the given unknown compound.
