Intensive agriculture leads to ecosystem loss and contributes to global warming.
Intensive agriculture is a farming method that uses large amounts of labor and investment to increase the yield of the land.
Human beings form an integral part of the environment and have the largest ecological footprint.The environment has suffered for thousands of years due to human activity.Intensive agriculture is generally aimed at feeding a large population of people, however, this method has contributed as one of the biggest threats to the global environment as it leads to ecosystem loss and global warming.It is responsible for 80 percent of tropical deforestation and the emergence of new parasites and the reappearance of parasites that were once under control.It reduces beneficial plants and insects and depletes and degrades the soil on which they depend.Thus intensive agriculture results in soil erosion followed by the genetic erosion of livestock and crop species worldwide.
To know more about Intensive agriculture,
https://brainly.com/question/14864710
#SPJ4
During the heating season, a damper in the bypass duct is closed to prevent air from passing through the humidifier. Electronic humidistats are equipped with solid-state sensors in place of a hygroscopic element. Evaporative humidifiers contain an element that is kept damp. False
This statement is False because Solid-state sensors are used in place of a water - absorbing element in electronic humidistats. A damper in the bypassed duct is closed during the summer period to stop airflow.
What is hygroscopic and example?Hygroscopy - A material is said to be hygroscopic if it has the capacity to adsorb and retain water or water from its immediate surroundings. Examples include ethanol, glycerin, concentrated sulfuric acid, honey, silica gel, and methanol.
How hydroscopic is water?Around the soil particles, some water in the soil creates an incredibly thin, firmly held layer. It's referred to as hydroscopic water. A little amount of water in the soil is chemically linked to soil components in the soil. We refer to it as mixed water.
To know more about hygroscopic visit:
https://brainly.com/question/15743598
#SPJ4
You drop a 2.00 kg book to a friend who stands on the ground at distance D = 10.0 m below. If your friend's outstretched hands are at distance d = 1.50 m above the ground (Fig. 8-28), (a) how much work Wg does the gravitational force do on the book as it drops to her hands? (b) What is the change ΔU in the gravitational potential energy of the book–Earth system during the drop? If the gravitational potential energy U of that system is taken to be zero at ground level, what is U(c) when the book is released and (d) when it reaches her hands? Now take U to be 100 J at ground level and again find (e) Wg, (f) ΔU, (g) U at the release point, and (h) U at her hands.
The aswers are as follows:
a) 167J, b) -167J, c) 196J, d)29J, e)167J, f)-167J g)296J, and h) 129J
If your friend's outstretched hands are at distance d = 1.50 m above the ground, (a) work Wg does the gravitational force do on the book as it drops to her hands 167J, b) -167J, c) 196J, d)29J, e)167J, f)-167J g)296J, and h) 129J
a) Work = mg(Ac)
= 2 × 9.8 × (10 - 1.5) = 167j
b) ΔU = Ubc - Uab = Mg(bc) - Mg(ab)
= mg(bc - ab)
= 2 × 9.8 (1.5 - 10) = -167j
c) Potential energy at reach point v = mg(AB) = 2 × 9.8 × 10 = 196J
d) Potential energy at reach point U = mg (bc) = 2 × 9.8 × 1.5 = 29.4j
e) Total work wg = mg (ac) = 2 × 9.8 × 3.5 = 167j
f) ΔU = -wg = - 167j
g) ui = mg × AB + 100 = 196 + 100 = 296j
h) uf = mg × bc + 100 = 29.4 + 100 = 129j
Given the possibility of motion, gravitational forces can sort phases of various densities. Although high temperatures are not anticipated for the early Earth, widespread melting is one possibility. Sorting in response to the outgassing of deeply buried ices is a more feasible scenario. Such processes would have altered the moment of inertia, necessitating an adjustment to the angular velocity. Friction opposes gravitational settling and prevents it from being conservative, which makes quantification dubious. The ensuing phase separation and angular momentum alterations would not need to be as extensive as commonly believed if an iron protocore existed.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ4
Calculate the power of an electric bulb which consumes 2400 J in a minute
power of the bulb = 40 watt
Briefing
Power: In physics, the term "power" refers to the rate at which a task is completed, or how much energy is used during the allotted time.
What is energy now?
In physics, energy refers to the ability to do a task. It may exist in different forms, including potential, kinetic, thermal, electrical, chemical, radioactive, and others.
Consequently, in light of the posed query:
2400 J of energy
60 seconds in a minute is time.
As a result, we know that Power = Energy/Time.
p = E/t p = (2400-/60) joules/sec
p=40 W
to learn more about Energy.
Visit
https://brainly.com/question/1932868
#SPJ4 .
A rod has a length 2.0000m at 20.0C. The length of the rod increases to 2.0005
5.00 × 10-3/K is the coefficient of thermal expansion of the material from which the rod is made as it increases its length to 2.0005m
What is the purpose of the thermal expansion coefficient?The coefficient of thermal expansion explains how an object's size varies when temperature changes. In particular, it measures the fractional size change per degree change in temperature at constant pressure, where lower coefficients denote a reduced propensity for size change.
What does thermal expansion mean?The propensity of matter to alter shape, volume, and area in reaction to a change in temperature is known as thermal expansion. The average molecular kinetic energy of a substance has a monotonic relationship with temperature.
How is thermal expansion calculated?Use the equation for linear thermal expansion ΔL=αLΔT Δ L = α L Δ T to calculate the change in length, ΔL .
How to solve?Get your rod hot enough to achieve, say, 1% linear thermal expansion.
The rod's dimension has increased to 1.01 units.
The rod is 1.030301 times its original size, or 1.013 larger than it was before heating.
This equals 1.03 when rounded to three major figures. In other words, its volume is 3% higher than that of the cold specimen.
The linear expansion is tripled, or 3%, by the volumetric expansion.
Learn more about Kinetic energy here:
brainly.com/question/26472013
#SPJ1
Complete question:
A rod has a length 2.0000 m at 20.0°C. The length of the rod increases to 2.0005 m when the temperature increases to 40.0°C. What is the coefficient of thermal expansion of the material from which the rod is made?
Two blocks, with masses indicated in the figure above, are at rest on a horizontal surface and connected by a string of negligible mass and a compressed spring. There is negligible friction between the blocks and the surface. The string is cut, and the spring pushes the blocks away from each other. Which of the following statements are true about the motion of the blocks immediately after the string is cut? select two answers.
1. The velocity of the center of mass of the two-block system is zero.
2. The magnitude of the acceleration of the left block is greater than that of the right block.
The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.
Learn more about center of mass here:
https://brainly.com/question/27549055
#SPJ4
A 59-kgkg person riding a bike puts all her weight on each pedal when climbing a hill. The pedals rotate in a circle of radius 18 cmcm . What is the maximum torque she exerts?
A 59-kg person riding a bike puts all her weight on each pedal when climbing a hill. The pedals rotate in a circle of radius 18 cm. the maximum torque she exerts is 104.07Nm.
given that :
mass ,m = 59 kg
radius , r = 18 cm
The force , F = mg
F = 59 × 9.8
F = 578.2 N
The torque is expressed as:
torque = force × radius
torque = 578.2 N × 0.18 m
torque = 104.07 Nm
Thus, if the mass is 59 kg and the radius is 18 cm then maximum torque she exerts is the 104.07 Nm.
To learn more about torque here
https://brainly.com/question/29851760
#SPJ4
apply the loop rule to loop 2 (the smaller loop on the right). sum the voltage changes across each circuit element around this loop going in the direction of the arrow. remember that the current meter is ideal.express the voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.
The voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.ΣΔV = 0 = I3 ⋅ R3 - I2 ⋅ R2.
When applying Kirchhoff's second rule the loop rule we need to identify closed loops and decide whether to loop clockwise or counterclockwise. For example, in Figure 3 the loop was traversed in the same direction as the current.
Loop 1 is the full loop and Loop 2 is the small loop on the right. To apply the loop rule, add all those voltage changes. Kirchhoff's Second Law, also known as Kirchhoff's Voltage Law states that the sum of all voltages around the closed loop of any circuit must be zero. This is a result of charge conservation and energy conservation.
Learn more about The loop rule here:- https://brainly.com/question/15705903
#SPJ4
five coins are stacked in the smooth plastic container. if each coin weighs 0.0235 lb, determine the normal reactions of the bottom coin on the container at points a and b.
The smooth plastic jar has five pennies placed inside of it. The normal reactions of the bottom coin on the container at locations a and b will be 0.0705 lb and 0.1175 lb respectively if each coin weighs 0.0235 lb.
What does normal force mean?A contact force, the normal force is often referred to as the normal reaction force. On two surfaces that are not attached to one another, a normal force cannot be applied.
What normal force is present during deceleration?The body's weight determines the usual deceleration force. A body's position relative to the ground tells us when it is about to fall. The normal force is the portion of a force that is perpendicular to any contact surface.
To learn more about normal force visit:
brainly.com/question/13340671
#SPJ4
A wire is formed into a circle having a diameter of 20.0 cm and placed in a uniform magnetic field of 2.50 mT. The wire carries a current of 5.00 A.
(a) Find the maximum torque on the wire.
_____ µN·m
(b) Find the range of potential energies of the wire-field system for different orientations of the circle.
minimum
_____µJ
maximum
_____ µJ
The maximum torque on the wire is 392.3 µN·m and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)
Torque: Torque is a measure of the force that can cause an object to rotate about an axis. It is a vector quantity.
Given that,
diameter D=20cm
Radius r =10cm
magnetic field B =2.5mT
current I=5A
Torque= n×B
=nBsinФ
torque=nB= NIAB
= 1×5×π×[tex]10^{2}[/tex]×[tex]10^{-4}[/tex]×2.5×[tex]10^{-3}[/tex]
= 39.23×[tex]10^{-5}[/tex]
= 392.3µN·m
minimum potential energy= -nB= -392.3µN·m
maximum potential energy =+nB= +392.3µN·m
Therefore the maximum torque on the wire is 392.3 µN·m when is placed in an uniform magnetic field of 2.50mT and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)
Learn more about torque:
https://brainly.com/question/20691242
#SPJ4
a wire of length l is wrapped into a coil with n turns this coil is then placed in a magnetic field of strength b
Maximum torque developed is (BIL²/4[tex]\pi[/tex]n).
Torque is a measure of force that can cause an object to rotate about an axis.
A force causes an object to accelerate in linear kinematics. Similarly, torque causes angular acceleration. Torque can therefore be defined as the rotational equivalent of a linear force. The line about which the object rotates is called the axis of rotation. In physics, torque is simply the tendency of a force to rotate or twist.For any structure such as a solenoid, toroid, and circular arc, the magnetic field at a certain point of the structure is always proportional to the number of turns of the coil.
As we know magnetic field is (BIL²/4[tex]\pi[/tex]n)
2[tex]\pi[/tex]rn = L
r = (L/2[tex]\pi[/tex]n)
A = [tex]\pi[/tex]r²
A = (L²/4[tex]\pi[/tex]n²)
M = niA
M = (iL²/4n[tex]\pi[/tex])
Then Torque is Z = MBSin90°
The question is incomplete, the complete question is "a wire of length l is wrapped into a coil with n turns this coil is then placed in a magnetic field of strength b, the maximum possible torque developed is?"
To know more about torque,
https://brainly.com/question/14149514
#SPJ4
9. What is the mass of a sky diver falling at a velocity of 52 m/s who has a kinetic energy of
97344 Joules?
Answer: m = 72 kg
Explanation:
Which statement best explains the purpose of making the loop of wire turn between the permanent magnets in an electric generator?
OA. The magnetic fields of the magnets cause electric charges in the
moving wire to flow.
B. The poles of the magnets reverse while the loop of wire is in
motion.
OC. The electric charges in the loop are repelled if the loop of wire
stops turning.
D. The electric current in the loop causes a magnetic field to form
around the moving wire.
Answer: C
Explanation:
Enjoy <3
With respect to stellar spectra, select all of the correct statements from the following list.
Doppler shifts in spectral lines give clues to the motions of stars.
The Lyman and Paschen series of the hydrogen spectrum are not visible.
Stellar spectra are absorption spectra.
Spectra can reveal the chemical composition of stars.
With respect to stellar spectra Doppler shifts in spectral lines give clues to the motions of stars.
What do spectral lines tell us?The spectral lines of an element can be used by astronomers to determine the element's temperature as density within the star. The spectral line may also be used to display the star's electric flux. The width of the line may be used to gauge how rapidly the material is moving. We can learn something about stellar winds from this.
How are elements recognized by spectral lines?Dark bands in a broad band can be used to identify components, and it can also reveal an object's temperature: The spectrum has more green, blue, and violet hues as the temperature rises. The spectrum of relatively cool objects is dominated by deep red or red and yellow.
To know more about Spectral lines visit:
https://brainly.com/question/27494244
#SPJ4
A bowling ball accidentally falls out of the cargo bay of an airliner as it flies along in a horizontal direction. As observed by a person standing on the ground and viewing the plane as in the figure below, which of the paths 1-5 would the bowling ball most closely follow as it falls to the ground.a. 10
b. 2
c. 4
d. 45
4th paths out of 1 - 5 would the bowling ball most closely follow as it falls to the ground
The bowling ball moves due to the resultant force of the vertical and horizontal direction.
What is resultant force ?The overall force operating on the item or body as well as the direction in which the body is moving are referred to as the resultant force. When the object is stationary or moving at the same speed as it, there is no consequent force.
The outcome is what is produced when vectors are added together. The biggest (maximum) consequent when adding two vectors is equal to their sum when forces are acting in the same direction.
Learn more about Resultant force here:
https://brainly.com/question/12785175
#SPJ4
1. Two main-sequence stars have the same temperature. If star A is four times more luminous than star B, thena) star B is two times farther away than star A.b) star B is four times farther away than star A.c) star B is eight times farther away than star A.d) star B and star A lie at the same distance from us.e) it is impossible to determine their relative distances from the information given.
The temperature of two main-sequence stars is the same. Star B is two times further away than star A if star A is four times more brilliant.
What's the connection between temperature and luminosity for main sequence stars?The temperature and brightness of a main-sequence star depend on its mass. Bigger is always hotter and brighter. A star with ten times the mass of the sun contains nuclear energy. The brightness is 3000 times that of the sun.
Does a star's luminosity have to be the same for stars with the same temperature?Even stars with the same temperature inevitably have different luminosities. As an illustration, consider stars A and E, which have the same temperature but differ in luminosity.
To know more about stars visit:
https://brainly.com/question/7379319
#SPJ4
Can someone help me and tell me as soon as possible
Answer:
copy and complete this diagram so that the system is in equilibrium
Suppose a rocket is fired vertically upward from the surface of the earth with one-half of the esacpe speed. How far from the center of the earth will it reach vefore it begins to fall back?
(let g = 9.8 m/s^2 and Re = 6370 km)
A. 1.3 * 104 km
B. 8.5 * 103 km
C. 9.6 * 103 km
D. 2.6 * 104 km
E. 1.9 * 104 km
The correct answer: B.
I do not understand why I am not getting the correct answer.
The distance before it falls back to the earth is 8.5 * 103 km. Option B
What is the escape velocity?We know that the escape velocity has to do with the velocity that has to be supplied to a material so that the material can be able to escape from the earth's gravitational pull. Let us recall that the whole earth is a large gravitational field. If we throw an object up then the object would have to certainly fall doen to the ground under the influence of gravity.
It is therefore clear that gravity is the force that draws any object that goes upwards down back to the ground. Given that we have been told here that the speed is one-half of the escape speed, then then the magnitude of the speed is 5590.3 m/s.
Given that;
v^2 = u^2 - 2gh
v = final velocity
u = initial velocity
g = acceleration due to gravity
h = height
Then;
u^2 = 2gh
h = u^2/2g
h = ( 5590.3)^2/2 * 9.8
= 8.5 * 103 km
Learn more about escape velocity:https://brainly.com/question/14297933
#SPJ1
what is the force on the electron, magnitude, and direction? (i.e. when it is in the plane of the page as stated above.) justify your answer.
Faraday's left hand rule gives us the direction of the force on the particles, then [tex]F^{\prime}=B q v\\[/tex] gives the size of the force.
What is direction?
Direction is characterized as the course that anything follows, the route that must be taken to go to a particular location, the direction in which something is beginning to take shape, or the direction you are facing. When you turn right instead of left, that is an illustration of direction.
If we use Faraday's left hand rule on each particle, we can determine the effect of the magnetic field on the particle. The diagram shows the direction of the fields and the "current" so we can apply the rule.
For the electron, the magnetic field will exert a force directed into the plane of the paper (or if travelling on the earth, this will be towards the earth).
For the proton, the magnetic field will exert a force out of the paper (or if travelling on the earth, this will be away from the earth).
The force on a particle of charge q moving in a magnetic field, B with a velocity v is given by:
[tex]F=B q v[/tex]
Both proton and electron have a charge of [tex]1.6 \times 10^{-19} C\\[/tex]
For the electron
[tex]$$F=\left(190 \times 10^{-3}\right) \cdot\left(1.6 \times 10^{-19}\right) \cdot 575000=1.748 \times 10^{-14} N$$[/tex]
For the proton
[tex]$$F=\left(54.2 \times 10^{-6}\right) \cdot\left(1.6 \times 10^{-19}\right) \cdot 130000=1.127 \times 10^{-18} N$$[/tex]
To learn more about direction visit
https://brainly.com/question/17026169
#SPJ4
if the short-term passive test indicates a radon level reading of 18 pci/l, which of the following statements is the most correct?
Radon is a radioactive gas which has no smell, colour or taste.
What is radon?When you breathe in radon gas, it decomposes into solid radioactive particles that can become trapped in your lungs. These particles release small energy bursts as they degrade further. Over the course of ones lifetime, this can cause lung tissue to deteriorate and result in lung cancer.
Lung cancer has radon as one of its main causes. Depending on the average radon level across the nation and the prevalence of smoking, radon is thought to be responsible for anywhere from 3% to 14% of all lung cancers. Smokers are more likely to develop lung cancer due to the interaction between radon and smoking cigarettes.
There are tried-and-true, long-lasting, and reasonably priced ways to keep radon out of new construction and reduce it in existing structures.
With a small passive detector, it is simple to measure the amount of radon indoors.
The amount of radon in the air is measured in “picocuries per liter of air,” or “pCi/L
Note that your information is incomplete and a overview was given.
Learn more about radon on:
https://brainly.com/question/14761538
#SPJ1
sand dunes form when ? ? sand build up in one place
Sand dunes form when the mound grows in circumference and height due to subsequent sand build up in one place by wind.
What is sand dunes?A sand dune is a mass of loose sand grains that have accumulated due to wind movement. The mound will eventually get so massive that it will collapse under its own weight to form a sand dune as it increases in height and circumference as a result of additional sand deposits. A set of sand dunes is referred to as a sand dune complex or sand dune system by geologists.
On the other hand, depending on the quantity of vegetation present, vast clusters of sand dunes are referred to as sand seas or sand dune fields. Ergs are another name for sand seas.
Learn more about sand dunes here:
https://brainly.com/question/2456718
#SPJ1
Your question is incomplete, but most probably the question was:
sand dunes form when _______ sand build up in one place by wind.
A pulley system is used to lift up a 90N boulder. What is the mechanical advantage if you only need to use 15N of force to lift the boulder?
By simply creating more loops or pulleys, the pulley system's mechanical advantage can be accomplished.
Equation:
It is known that a pulley system can lift a crate with 90 newtons of force. Finding the pulley system's mechanical advantage is important if the input force is 15 newtons.
The force makes the distance longer as though it were working. Mechanical advantage is not greatly affected by the number of pulleys. This is only based on the amount of weight that needs to be lifted.
Therefore,
F1/F2 = 90/15
F1/F2 = 6
Given that the crate's weight is 90 N and the input force is 15 N, this makes sense.
To know more about mechanical advantages, visit:
brainly.com/question/24056098
#SPJ1
A single loop of copper wire lying flat in a plane, has an area of 7.80 cm^2 and a resistance of 2.70 Ω A uniform magnetic field points perpendicular to the plane of the loop. The field initially has a magnitude of 0.500 T, and the magnitude increases linearly to 3.50 T in a time of 1.10 s. What is the induced current (in mA) in the loop of wire over this time?
The induced current in the loop of the copper wire is found to be 7.85 mA.
The single loop of the copper wire is lying in flat plane and the magnetic field is pointing perpendicular to the plane of the loop. The area of the loop is given to be 7.8cm²
The magnetic field initially has a magnitude of 0.500 Tesla and it finally increases manner to grow to a magnitude of 3.50 Tesla in a time 1.10 seconds.
The induced EMF in the circuit will be given by the relation,
E = A∆B/∆T
Where,
B is magnetic field,
A is the area and T is the time taken.
Putting all the values,
E = 0.00078×(3.5-0.5)/1.1
E = 21.2mV.
The resistance in the copper loop is given to be 2.7 ohm.
Now, the induced current in the circuit will be given by the relation,
I = E/R
Putting all the values
I = 21.2/2.7
I = 7.85 mA.
So, the induced current in the wire is 7.85 milliamps.
To know more about induced current, visit,
https://brainly.com/question/27605406
#SPJ4
A student received this anemometer as gift: He wants to try it out but the wind is not blowing outdoors He turns on an electric; fan and places the anemometer a constant 0.5 meter in front of the fan_ He sees these digital readings during 10 seconds: 9.62,9.61, 9.63,9.61,9.63,9.61 and 9.62 km/hr: These data are demonstrating which Ptype of experimental error intrinsic systematic error random error in measurement systematic error in measurement intrinsic random error
A cup anemometer, made up of three or four cups with a conical or hemispherical shape set symmetrically around a vertical spindle, is typically used to measure wind speed. The spindle turns because of the wind blowing into the cups.
How to measure wind speed?Anemometers, the devices used to measure wind, may record wind speed, direction, and gust force.The nautical mile per hour (0.51 m sec-1 = 1.15 mph) is the standard unit for expressing wind speed. Wherever the wind is blowing, the wind's direction is reported and measured in relation to true north (not magnetic north). A wind blows from the east or 90 degrees, the south or 180 degrees, and the west or 270 degrees, which is the direction of a westerly wind.Normal wind speed increases with height above the earth's surface, and it is greatly influenced by things like the terrain's roughness and the existence of nearby structures, trees, and other obstructions.There should be no significant obstructions within 300 metres of the tower and the exposure should be flat with uniformly rough terrain. In reality, only a small number of sites in the observing network actually match this condition for all incident wind directions, but the majority are fairly typical of an open site.To Learn more About wind speed refer to:
https://brainly.com/question/15300839
#SPJ1
The smoke from the Old Man’s furnace travels up from the basement at a velocity of |.5 meters per second. Ralphie is sitting in the kitchen above and can smell the smoke within 6 seconds. What is the approximate distance that the smoke travels up from the furnace?
The approximate distance that the smoke travels up from the furnace is 9metres.
What is distance?Distance is described as a numerical or occasionally qualitative measurement of how far apart objects or points are. In the field of physics or everyday usage, distance is usually referred to a physical length or an estimation based on other criteria.
Parameters given:
Velocity = 1.5
time = 6 seconds
We know that distance = speed x time
Hence, distance = 1.5 x 6 seconds
distance = 9 meters.
Distance is a scalar quantity that refers to how much ground an object has covered in the course of its motion while we can describe displacement as a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.
Learn more about distance at: https://brainly.com/question/26046491
#SPJ1
Elcft parallelepiped is in an electric field which to the left of the dashed line; has the value Eleft =< -55.37,0,0 > N/C,and Eright =< 55.37,0,0 > N/C to the right of the dashed line_ The top and bottom of the parellelepiped are rectangles Iying in the = plane, and measure /1 by l2, as shown: The left and right faces are rectangles inclined by an angle 0 = 83.489 from the € axis, and measure lz by l3. The values Of L1,l2, and l3 are 23.82 cm, 11.27 cm, and 32.48 cm, respectively. What charge is contained inside the parallelepiped?
There is a net flux going into the surface, the parallelepiped must have a net charge (negative charge). Additionally, without an external field, all lines would point at the slab.
Six parallelograms come together to form a three-dimensional shape called a parallelepiped (the term rhomboid is also sometimes used with this meaning). It is comparable to a parallelogram in the same way that a cube is comparable to a square. There are three similar descriptions of a parallelepiped. A prism with a parallelogram-shaped base, a hexahedron with three pairs of parallel faces, and a polyhedron with six faces, each of which is a parallelogram.
There are pairs of parallel and congruent faces. The parallelepiped has twelve (12) edges and eight (8) vertices. The edges of the parallelepiped can be split into three (3) sets of four (4) edges each, where the edges in each set are all parallel and the same length. The parallelepiped is also a zonohedron.
A parallelepiped is a three-dimensional object having six faces and a parallelogram-like design. It has 8 vertices, 6 faces, and 12 edges. The parallelepiped is also known by the names rhombic, cuboid, and cube.
To know more about parallelepiped
https://brainly.com/question/29835281
#SPJ4
what should be the value of 'x' such that the mass то exerts a force of mg on the inclined surface at P. (N=mg)
The value of 'x' such that the mass то exerts a force of mg on the inclined surface at P. (N=mg) is given by
x = N / (mg cos θ)
What is value of 'x'?Generally, To determine the value of 'x', you need to know the angle of inclination of the surface and the mass of the object. The force of gravity (N) acting on the object is equal to the mass of the object (m) multiplied by the acceleration due to gravity (g). The force of gravity is also equal to the normal force (N) exerted by the surface on the object, which is perpendicular to the surface.
If the surface is inclined at an angle θ with respect to the horizontal, the normal force will be equal to the component of the force of gravity along the surface. This component can be calculated using the formula N = mg cos θ, where θ is the angle of inclination and m is the mass of the object.
Therefore, to determine the value of 'x', you need to solve the equation N = mg cos θ for 'x'. To do this, you can rearrange the equation to solve for x:
x = N / (mg cos θ)
Substituting the values of N, m, and θ into this equation will give you the value of 'x' that you are looking for.
Read more about mass of the object.
https://brainly.com/question/6240825
#SPJ1
A toy spacecraft is launched directly upward. When the toy reaches its highest point, a spring is released and the toy splits into two parts with masses of 0.01 kg and 0.09 kg, respectively. Immediately after the separation, the 0.01 kg part moves horizontally due east. Air resistance is negligible. True statements about the 0.09 kg part include which of the following? I. It could move north immediately after the spring is released. II. It takes longer to reach the ground than does the 0.01 kg part. III. It strikes the ground closer to the launch point than does the 0.01 kg part. (A) I only (B) III only (C) I and II only (D) II and III only (E) I, II, and III
Air resistance is hardly noticeable. true regarding the 0.09-kilogram component. This causes 0.01kg to land farther from the launch site than 0.09kg did.
0.09kg will move to the west due to momentum conservation (opposite of 0.01 kg). Additionally, since both are at the same height above the ground, it will take them equal amounts of time to descend to the ground.
Allowing v to be the speed of 0.01 kg, which means that the speed of 0.09kg will be smaller than 0.01 kg,
0.01v - (0.09)V = 0
V = 0.01 v/ 0.09 = 0.111v
The speed of 0.09 kg = 0.111v
The speed of 0.09 kg is less than 0.01kg.
Because of this, 0.01kg hits the ground farther from the launch point than 0.09kg did.
The amount of resistance in an electrical circuit represents the resistance to current flow. The Greek letter omega (), which represents resistance, represents ohms. German physicist Georg Simon Ohm (1784–1854), who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.
Resistance measurements are typically performed in order to evaluate the health of a component or a circuit.
Current flow is inversely correlated with resistance. Conductor damage from corrosion or burning could be one of several potential causes if it is extremely high.
Learn more about resistance here:
https://brainly.com/question/17010736
#SPJ4
A 1000-kilogram space vehicle travels at 5 meters per second along the level road. The magnitude of the normal force acting on the vehicle is approximately A) 1000N B) 5000N C) 10000N D) 50000N
Answer:
C = 10000N
Explanation:
On a level surface, with no other force acting on the vehicle,
|Normal force| = |Weight|,
Weight = mass * acceleration due to gravity
= 1000 kg * 9.8 m/s^2 or N/kg
= 9800 N
--> 10000 N rounded to one significant digit
An ice skater with rotational inertia I0I0 is spinning with angular speed ω0ω0. She pulls her arms in, thereby increasing her angular speed to 4ω04ω0. Her rotational inertia is then:
a. I0I0
b. I02I02
c. 2I02I0
d. I04I04
e. 4I0
The new rotational inertia or final moment of inertia of the girl is I₀ / 4.
option D is the correct answer.
What is rotational inertia?
Rotational inertia is a property of any object which can be rotated.
Rotational inertia or moment of inertia of an object is a measure of the resistance of an object to changes in its angular velocity.
Based on the law of conservation of angular momentum, the formula for her new rotational inertia is given as;
I₀ω₀ = I₁ω₁
where;
I₀ is the initial moment of inertiaI₁ is the final moment of inertiaω₀ is the initial angular velocity of the objectω₁ is the final angular velocity of the objectThe given parameters include,
initial angular velocity = ω₀
final angular velocity = 4ω₀
initial moment of inertia = I₀
The final moment of inertia of the girl is calculated as
I₁ = ( I₀ω₀ ) / (ω₁)
I₁ = ( I₀ω₀ ) / (4ω₀)
I₁ = I₀ / 4
Learn more about rotational inertia here: https://brainly.com/question/14001220
#SPJ1
in the figure, light is incident at angle on a boundary between two transparent materials. some of the light travels down through the next three layers of transparent materials, while some of it reflects upward and then escapes into the air.
(a) θ5 in the air is 56.9° and (b) θ4 in the bottom material 35.30°. Normally, a light beam that strikes an angle on a prism's refracting face emerges from the opposite face.
How to calculate?(a) Approximating n=1 for air, we have
n1. sinθ1 = (1)sinθ5 ⇒56.9°=θ5
and with the more accurate value for n air in Table below, we obtain 56.80.(b) Equation n1 sinθ c =n2 sin 90° leads to,
n1 sinθ 1=n2 sinθ2 =n3 sinθ 3 =n4 sinθ 4
so that. θ4 =sin −1( n1/n4.sinθ 1 )=35.30° .
What does angle of incidence mean?The angle of incidence is formed by a line drawn perpendicular to the reflecting barrier and the wave's direction of motion.
Is the incidence angle of refraction?Refraction Depending on the Refractive Indices in the Two Media and the Angle of Incidence. Snell's law states that the angle of incidence, I and the proportion of the refractive indices of the two media that make up the interface determine the angle of refraction, r.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ4
