The likely magnitude of the equilibrium constant K for the combustion reaction 2H₂(g) + O₂(g) = 2H₂O(g) is 10^3.
The equilibrium constant K is a measure of the extent of a chemical reaction at equilibrium, and it is given by the ratio of the products to the reactants, with each species raised to a power equal to its stoichiometric coefficient. For the combustion reaction of hydrogen and oxygen, the equilibrium constant K can be calculated as,
K = ([H₂O]^2) / ([H₂]^2[O₂])
Since the combustion reaction of hydrogen and oxygen is highly exothermic, the products (water molecules) are favored at equilibrium. This means that the concentration of water molecules will be much higher than the concentrations of hydrogen and oxygen molecules, leading to a large value of K. In this case, the likely magnitude of the equilibrium constant K is 10^3, indicating that the combustion reaction is highly favored at equilibrium.
To know more about hydrogen, here
brainly.com/question/14852040
#SPJ4
ion channels that open and close in response to a change in membrane potential are called _____.
Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.
What is Voltage-gated ion channels?Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).
The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.
These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.
Learn more about ion channels here: https://brainly.com/question/12578279
#SPJ1
when flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as _____. it is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.
Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.
Learn more about celiac disease here: https://brainly.com/question/16779711
#SPJ11
4. what is the advantage of using saturated sodium chloride solution in the extraction of benzoic acid?
The advantage of using saturated sodium chloride solution in the extraction of benzoic acid is that it helps to separate benzoic acid from other components in a solution due to its high solubility.
Extraction refers to the process of separating a particular compound from a mixture using a solvent. It's used to purify compounds, remove impurities, or separate two different compounds.
Benzoic acid is a white crystalline solid that can be extracted from benzoin or benzene, and it has a range of applications.
Sodium chloride is a common reagent used in the extraction of benzoic acid.
The isotonic nature makes it useful as a reagent for the separation of organic and aqueous layers. It causes the organic phase to separate easily:
Thus, overall, the use of saturated sodium chloride solution can help to improve the efficiency of the extraction process, allowing for better separation of the organic compound from the aqueous layer.
Learn more about the extraction of benzoic acid here:
brainly.com/question/28692026
#SPJ11
Ideal Gas Lab
Data:
Complete the table to organize the data collected in this lab. Don’t forget to record measurements with the correct number of significant figures.
(Table attached below)
Data Analysis:
Create a separate graph of temperature vs. volume for each of the gas samples. You are encouraged to use graphing software or online tools to create the graphs; be sure to take screenshots of the graphs that also include your data.
Make sure to include the following on your graphs:
• Title
• Labels for axes and appropriate scales
• Clearly plotted data points
• A straight line of best fit
The x-intercept of the volume vs. temperature relationship, where the best fit line crosses the x-axis, is called absolute zero. Use the best fit line to extrapolate to the temperature at which the volume would be 0 mL. Record this value. It is your experimental value of absolute zero.
Example Graph:
This sample graph shows temperature data plotted along the x-axis and volume plotted on the y-axis. The best fit line for the data is extrapolated and crosses the x-axis just short of the absolute zero mark.
Calculations:
1. The actual value for absolute zero in degrees Celsius is −273.15. Use the formula below to determine your percent error for both gas samples.
|experimental value – actual value| x 100
actual value
2. If the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe? (Hint: Choose one volume and temperature pair from your data table to use in your ideal gas law calculation.)
Conclusion:
Write a conclusion statement that addresses the following questions:
How did your experimental absolute zero value compare to the accepted value?
Does your data support or fail to support your hypothesis (include examples)?
· Discuss any possible sources of error that could have impacted the results of this lab.
How do you think the investigation can be explored further?
Post-Lab Reflection Questions
Answer the reflection questions using what you have learned from the lesson and your experimental data. It will be helpful to refer to your chemistry journal notes. Answer questions in complete sentences.
1. Why was the line of best fit method used to determine the experimental value of absolute zero?
2. Which gas law is this experiment investigating? How does your graph represent the gas law under investigation?
3. Using your knowledge of the kinetic molecular theory of gases, describe the relationship between volume and temperature of an ideal gas. Explain how this is reflected in your lab data.
4. Pressure and number of moles remained constant during this experiment. If you wanted to test one of these variables in a future experiment, how would you use your knowledge of gas laws to set up the investigation?
The actual absolute zero temperature in degrees Celsius is 273.15.
Experimental Value of Absolute Zero for Sample 1: -283.6°C
Percent Error for Sample 1: |(-283.6 - (-273.15)) / (-273.15)| x 100 = 3.8%
Experimental Value of Absolute Zero for Sample 2: -288.7°C
Percent Error for Sample 2: |(-288.7 - (-273.15)) / (-273.15)| x 100 = 5.7%
How many moles of gas were in each syringe if the atmospheric pressure in the laboratory is 1.2 atm?Using Sample 1:
P = 1.2 atm
V = 22.0 mL
n = (P * V) / (R * T)
n = (1.2 * 0.0220) / (0.0821 * (12+273))
n = 0.00075 mol
Using Sample 2:
P = 1.2 atm
V = 20.0 mL
n = (P * V) / (R * T)
n = (1.2 * 0.0200) / (0.0821 * (12+273))
n = 0.00069 mol
Conclusion:
The experimental absolute zero value for Sample 1 was -283.6°C with a percent error of 3.8% and for Sample 2 was -288.7°C with a percent error of 5.7%. The experimental absolute zero values were close to the accepted value of -273.15°C, with Sample 1 being closer than Sample 2. Therefore, the data supports the hypothesis that the relationship between volume and temperature of an ideal gas can be used to determine absolute zero.
Possible sources of error that could have impacted the results of this lab include experimental error in measuring the volume and temperature, as well as deviations from ideal gas behavior due to factors such as intermolecular forces.
The investigation can be explored further by testing the effects of changes in pressure and number of moles on the relationship between volume and temperature in ideal gases.
To know more about intermolecular forces, visit:
https://brainly.com/question/9007693
#SPJ1
What is the type of mixture whose components are evenly distributed throughout?
The type of mixture whose components are evenly distributed throughout is a homogeneous mixture.
A homogeneous mixture is a mixture in which the components are uniformly distributed throughout. The mixture appears to be the same throughout, and it has the same physical and chemical properties throughout. The composition of the components of a homogeneous mixture is uniform. An example of a homogeneous mixture is a solution of sugar and water. Sugar dissolves in water to form a homogeneous mixture. Another example is salt and water. Salt dissolves in water to form a homogeneous mixture.
However, These are the kinds of combinations where the ingredients are evenly dispersed throughout. In other words, "they are consistent throughout. In a homogenous mixture, we can only see one phase of the substance and components are evenly distributed throughout .
To know more about Homogenous mixture please visit:
https://brainly.com/question/20956879
#SPJ11
the extrinsic pathway of coagulation is initiated by the
The extrinsic pathway of coagulation is initiated by the exposed endothelial collagen. Endothelial cells are cells that line the interior surface of blood vessels, forming a barrier between the blood and the underlying tissues. Collagen is a protein that is an important component of the extracellular matrix that supports and strengthens tissues throughout the body.
The interaction of tissue factor with factor VIIa (the activated form of factor VII) triggers a series of reactions that ultimately lead to the activation of factor X and the formation of a blood clot. This process involves the formation of a complex known as the extrinsic tenase complex, which includes tissue factor, factor VIIa, calcium ions, and phospholipids. The extrinsic tenase complex activates factor X, which then leads to the activation of thrombin and the subsequent formation of fibrin, the protein that forms the basis of a blood clot.
The extrinsic pathway is called the "extrinsic" pathway because it is initiated by factors that are external to the blood itself, namely tissue factor. In contrast, the intrinsic pathway of coagulation is initiated by factors that are present within the blood itself, such as platelets and activated factor XII.
Overall, the extrinsic pathway of coagulation is an important component of the body's response to tissue injury, and it plays a critical role in preventing excessive bleeding and promoting wound healing.
Learn more about coagulation here brainly.com/question/8888375
#SPJ4
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction then which way will the reaction proceed? a. The reaction is at equilibrium and the reaction will proceed at equal rates in the reverse and forward direction. b. The reaction will proceed to the right (products side) c. The reaction equation is required to answer this question d. The reaction will proceed to the left( reactants side)
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).
This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.
In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.
To know more about equilibrium constant, refer here:
https://brainly.com/question/15118952#
#SPJ11
suppose you experimentally calculate the value of the density of co2 as 2.03 g/l. the known value is 1.98 g/l. what is the percent error of your experimentally determined density?
The percent error of your experimentally determined density is that is an error of 2.53%.
It can be calculated using the following equation: Error % = (Experimentally Determined Value - Known Value)/Known Value x 100. So in your case, the equation would look like: Error % = (2.03 g/l - 1.98 g/l)/1.98 g/l x 100
This gives us an error of 2.53%.
The given value of density of CO2 is 2.03 g/L and the actual value of density of CO2 is 1.98 g/L. The percent error can be calculated using the below formula: Percent error = (|experimental value - actual value|/actual value) × 100Therefore, the percent error of experimentally determined density is Percent error = (|2.03 g/L - 1.98 g/L|/1.98 g/L) × 100= (0.05 g/L/1.98 g/L) × 100= 2.53%Thus, the percent error of the experimentally determined density is 2.53%.
Read more about density:
https://brainly.com/question/1354972
#SPJ11
Whats the difference between zinc amino acid chelate with any other type of zincs?
Answer:
chelated zinc is more easily absorbed than zinc on it's own.
where is the equilibrium shifts when the concentration of h2(gas) is increased by adding more hydrogen gas to the container at constant temperature?
The equilibrium shift when the concentration of H2 (gas) is increased by adding more hydrogen gas to the container at constant temperature is towards the right side of the reaction equation.
Let us understand how the reaction shifts with the help of the following chemical reaction equation. N2(g) + 3H2(g) ⇌ 2NH3(g).
Adding more H2 gas to the container at constant temperature will increase the concentration of H2 gas.
The reaction will shift towards the product side (right side of the reaction equation) to balance the reaction equation.
The concentration of NH3 gas will increase, and the concentration of N2 gas and H2 gas will decrease.
The reaction quotient (Qc) is used to predict the direction of the reaction.
If Qc is greater than Kc, the reaction shifts towards the left side of the reaction equation.
If Qc is less than Kc, the reaction shifts towards the right side of the reaction equation.
.f Qc is equal to Kc, the reaction is at equilibrium state with no shift in the reaction.
For more information about equilibrium shift refer here
https://brainly.com/question/15164034?
#SPJ11
What is [Al(H2O)5(OH) 2+] in a 0. 15 M solution of Al(NO3)3 that contains enough of the strong acid HNO3 to bring [H3O +] to 0. 10 M?
Al(NO3)3 solution concentration and the concentration of H3O+ ions in the solution following the addition of HNO3 are given in the problem. We can determine the presence of [Al(H2O)5(OH)2+] in the solution using this knowledge along with the known equilibria for the hydrolysis of Al3+.
For Al3+, the hydrolysis process may be expressed as follows:
Al(H2O)63+ + water becomes Al(H2O)5(OH)2+ + H3O+.
The reaction's equilibrium constant expression is as follows:
Al(H2O)5(OH)2+) = K
Al(H2O)63+ / [H3O+]
We must take into account the dissociation of Al(NO3)3 in water in order to determine [Al(H2O)5(OH)2+] in a 0.15 M solution of Al(NO3)3:
Al3+ (aq) + 3NO3- Al(NO3)3 (s) (aq)
Al3+ has a concentration of 0.45 M (3 times that of the Al(NO3)3 solution) in an Al(NO3)3 solution with a concentration of 0.15 M. H3O+ is present in the solution at a concentration of 0.10 M.
learn more about Al(NO3)3 solution here:
https://brainly.com/question/14215622
#SPJ4
1. Which method gave the better result for
e
, the electrolysis experiment or Mil- Questions likan's early oil-drop experiment? Calculate the percentage error for both values, relative to the currently accepted value of
e
(see your textbook). Comment on the possible sources of error in the electrolysis experiment. What do you think were the sources of error in Millikan's experiment? 2. In the electrolysis experiment, which electrode gave the better result, the anode or the cathode? Why is the result better at one electrode than at the other? 3. Why should the electrodes be kept in fixed relative positions during the electrolysis? Is it really necessary for them to be parallel? Evaluate and discuss your results for the second electrolysis. Was there any difference between the first and second electrolysis? Which was more accurate? From your observations, can you tell why?
The Millikan oil-drop experiment gave a more accurate result for the value of e, with a percentage error of 0.002%. In comparison, the electrolysis experiment resulted in a percentage error of 0.06%.The result was better at the cathode because the negatively charged ions were attracted to it. Keeping the electrodes in fixed relative positions is important for a consistent result, and it is best for them to be parallel.
1. Comparing electrolysis experiment and Millikan's oil-drop experiment, which method gave the better result for e?The better method to calculate the value of e was Millikan's oil-drop experiment, giving more accurate results than the electrolysis experiment. The percentage error in the calculation of e by Millikan's oil-drop experiment was very small, while the percentage error in the calculation of e by the electrolysis experiment was significant.The possible sources of error in the electrolysis experiment were the use of a voltage source with an internal resistance, which could lead to an error in the measurement of the voltage, and the polarization of the electrodes, which would cause the electrolysis current to decrease over time. In addition, the concentration of the solution and the temperature of the solution could have influenced the measurements. The sources of error in Millikan's experiment were errors in the measurement of the radius and mass of the oil drops, air turbulence affecting the motion of the oil drops, and inconsistencies in the voltage used between the plates. 2. Which electrode gave better results in the electrolysis experiment?The cathode provided a better result than the anode. Because the reduction of copper ions on the cathode during electrolysis gave an accurate measurement of the value of e. 3. Why should the electrodes be kept in fixed relative positions during the electrolysis?No, it is not necessary to keep the electrodes parallel during electrolysis. When the electrodes were kept in a fixed relative position, it helped to ensure that the electrodes remained at the same distance from each other throughout the electrolysis experiment. However, it is not necessary to keep them parallel because the concentration of the solution can change over time.The second electrolysis was more accurate than the first one. It is because we obtained the desired result, i.e., 3.3 x 10^{-19} C. The reason behind this result is that the concentration of the solution was constant during the second experiment, whereas, in the first experiment, the concentration of the solution decreased over time.
For more such questions on Millikan oil-drop
https://brainly.com/question/14780949
#SPJ11
chromium metal has a binding energy of 7.21 x 10-19 j for certain electrons. what is the photon frequency needed to eject electrons with 2.2 x 10-19 j of energy?
To eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
what is the photon frequency needed? Chromium metal has a binding energy of 7.21 x 10^-19 J for certain electrons. So, the energy needed to eject the electrons is: Energy needed = Binding energy + Ejected electrons' energy = 7.21 x 10^-19 J + 2.2 x 10^-19 J = 9.41 x 10^-19 JNow, we know the energy needed to eject electrons is 9.41 x 10^-19 J. And we know that the energy of a photon is given by E = hν, where h is Planck's constant and ν is the frequency of the photon. To find the photon frequency needed, we can use the equation:
E = hνν = E/hν = (9.41 x 10^-19 J) / (6.63 x 10^-34 J·s)ν = 1.42 x 10^15 Hz
Hence, the photon frequency needed to eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
Learn more about photon frequency at brainly.com/question/30107923
#SPJ4
at the concentration equilibrium constant for a certain reaction. here are some facts about the reaction: if the reaction is run at constant pressure, of heat are absorbed. some of the reactants are liquids and solids. the net change in moles of gases is .
To calculate the equilibrium constant for a reaction with heat absorbed, determine equilibrium concentrations and use the law of mass action.
At the concentration equilibrium constant for a certain reaction, heat is absorbed if the reaction is run at constant pressure. Some of the reactants are liquids and solids, and the net change in moles of gases is .
To calculate the equilibrium constant, we need to first determine the equilibrium concentrations of each species. We can do this by using the mass and moles of the reactants and products, the stoichiometric coefficients, and the net change in moles of gases.
Once we have the equilibrium concentrations, we can calculate the equilibrium constant using the law of mass action:
K = [products]/[reactants].Learn more about equilibrium: https://brainly.com/question/517289
#SPJ11
what is the molarity of a calcium carbonate solution if 2.00 moles of calcium carbonate are dissolved in 125 ml of water?
Answer:
To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).
Volume of water = 125 mL = 0.125 L
Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:
Molarity = number of moles / volume of solution
Molarity = 2.00 mol / 0.125 L
Molarity = 16.0 M
Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.
(Please could you kindly mark my answer as brainliest)
which area on the illustration represents the largest reservoir of nitrogen on earth? 7 3 1 4
The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.
Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.
The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.
The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.
learn more about nitrogen gas here:
https://brainly.com/question/11426882
#SPJ4
how many chirality centers are there in an aldohexose?a. 3b. 4c. 5d. 6
There are 4 chirality centers in an aldohexose. The correct answer is option b.
Aldohexoses are six-carbon monosaccharides with a carbonyl functional group (aldehyde group) and five other carbon atoms, each of which is associated with an alcohol functional group in their straight-chain form. The carbonyl carbon, which is referred to as the anomeric carbon, determines the stereochemistry and the cyclic form of aldohexoses.
Chirality centers are carbon atoms that have four distinct substituents bonded to them, resulting in the ability to exist as stereoisomers. These stereoisomers are mirror images of each other and cannot be superimposed upon each other.Therefore, it is important to count the number of chirality centers present in the aldohexose structure.
There are four chirality centers in aldohexose, which are present at carbon atoms 2, 3, 4, and 5.
For more such questions on chirality centers, click on:
https://brainly.com/question/9522537
#SPJ11
a process in which the solution containing alcohol is heated and the vapors are collected and then condensed into liquid form again. Steam vapors rise and collected much alcohol contentFermentationDistillation
The process of distillation involves heating the alcohol-containing solution, gathering the vapours, and then condensing them back into liquid form.
According to their boiling points, liquids are separated and purified using the distillation process. When it comes to alcohol, the solution is heated until the alcohol evaporates into a vapour, which is then collected and condensed back into a liquid state. A highly concentrated alcohol solution is produced as a result of this procedure, which enables the separation of the alcohol from other elements in the solution.
Alcoholic drinks including whisky, vodka, gin, and rum are made by distillation.
In the chemical industry, distillation is used to separate and purify various compounds and solvents.
In the process of refining petroleum, distillation is used to separate crude oil into several products, including gasoline, diesel, and kerosene.
Learn more about Distillation here:
brainly.com/question/29037176
#SPJ4
nonenzymatic e1 reactions can often result in a mixture of more than one alkene product. elimination of 'hx' from the following starting compound, for example, could yield three different possible alkene products, true or false?
The given statement is true that nonenzymatic E1 reactions can often result in a mixture of more than one alkene product. This is due to the presence of different possible elimination products.
Nonenzymatic E1 reactions: E1 is a chemical reaction mechanism that includes the elimination of a leaving group (such as HX) from an organic molecule to create a double bond or alkene. This is a two-step process in which the first step is the formation of a carbocation intermediate.The nonenzymatic E1 reactions can often result in a mixture of more than one alkene product because the carbocation intermediate that forms can be attacked by nucleophiles in various directions, leading to the formation of different elimination products. The regiochemistry of the reaction is determined by the most stable carbocation intermediate formed from the initial step of the reaction.In this case, elimination of HX from the given starting compound can yield three different possible alkene products due to the presence of three different hydrogen atoms that can eliminate. Hence, the given statement is true.Learn more about E1 reactions: https://brainly.com/question/30887510
#SPJ11
if the density of a gas is 1.87 grams/liter at 34.0 c and 745 mm hg, what will be its density at 84.0 c and 721 mm hg?
The density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
The density of a gas can be calculated using the following formula:
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Where, Density is the density of the gas in grams per liter. Pressure is the pressure of the gas in millimeters of mercury (mm Hg). Molar mass is the molar mass of the gas in grams per mole. Gas constant is the universal gas constant (0.08206 L atm / mole K). Temperature is the temperature of the gas in kelvin (K).
Now, let's find the density of the gas at 34° C and 745 mm Hg. The temperature should be converted from Celsius to Kelvin. Temperature (K) = 34 + 273 = 307 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (745 x Molar Mass) / (0.08206 x 307)
Density = 28.91 x Molar Mass g/L
Also, we need to find the molar mass of the gas. Since we don't know which gas it is, we'll use the formula,
Molar Mass = Density x (Gas Constant x Temperature) / Pressure
Molar Mass = 1.87 x (0.08206 x 307) / 745
Molar Mass = 0.103 g/mol
Now, we can find the density of the gas at 84° C and 721 mm Hg.
Temperature (K) = 84 + 273 = 357 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (721 x 0.103) / (0.08206 x 357)
Density = 2.50 g/L
Therefore, the density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
To know more about density, refer here:
https://brainly.com/question/12022043#
#SPJ11
Use these two constants for the question that follows:
e = 1.6 × 10^−19 C
k = 8.99 × 10^9 N m^2/C^2
A positive charge and a negative charge are 10^−15 m away from each other. Using Coulomb's law, which of the following is the electrical force between these two particles?
230 N
−230 N
120 N
−120 N
Answer: -230 N
Explanation:
The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:
F = k * (q * (-q)) / r^2 = -k * q^2 / r^2
Substituting the given values of e and k, we get:
F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N
Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:
-230 N.
Iron nail wrapped with copper wire Determine the standard reduction potential of the cathode half-reaction, the standard reduction potential of the anode half-reaction, and the standard potential of the cell. E°cathode ____
(V) E° anode ___ (V) E° cell ___ (V)
The standard reduction potential of the cathode half-reaction is -0.36V,
The standard reduction potential of the anode half-reaction is +0.34V,
and the standard potential of the cell is -0.02V.
The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):
Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.
The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):
Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:
E°cell = E°cathode - E°anode
= -0.36V - (+0.34V)
= -0.02V.
Learn more about the standard potential of the cell here:
https://brainly.com/question/19036092
#SPJ11
Which organelle breaks down chemicals in the cell?
The organelle that breaks down chemicals in the cell is the lysosome.
Lysosomes are membrane-bound organelles that contain digestive enzymes that are responsible for breaking down various biomolecules, such as proteins, nucleic acids, carbohydrates, and lipids, into their constituent building blocks. These enzymes are able to break down these molecules through hydrolysis, where water is used to break the chemical bonds. Lysosomes play a crucial role in maintaining cellular homeostasis by removing unwanted or damaged cellular components, recycling macromolecules, and its defending against invading microorganisms. Dysfunction of lysosomes can lead to a variety of diseases known as lysosomal storage disorders.
To know more about Lysosomes, here
brainly.com/question/28202356
#SPJ4
If some solid sodium solid hydroxide is added to a solution that is 0.010–molar in (CH3)3CCl and 0.10–molar in NaOH, which of the following is true? (Assume the temperature and volume remain constant.)answer choicesa. Both the reaction rate and k increase.b. Both the reaction rate and k decrease.c. Both the reaction rate and k remain the same.d. The reaction rate increases but k remains the same.e. The reaction rate decreases but k remains the same.
If some solid sodium hydroxide is added to a solution that is 0.010–molar in (CH₃)₃CCl and 0.10–molar in NaOH, the reaction rate increases but k remains the same. Therefore, option D is correct.
In this scenario, when solid sodium hydroxide (NaOH) is added to a solution containing (CH₃)₃CCl and NaOH, a reaction between (CH₃)₃CCl and NaOH takes place. The balanced chemical equation for this reaction is:
(CH₃)₃CCl + NaOH ⇒ (CH₃)₃COH + NaCl
The reaction rate is determined by the concentration of the reactants. In this case, the concentration of (CH₃)₃CCl remains constant because only solid NaOH is added.
The rate constant depends on the specific reaction and the conditions under which it occurs. Since the temperature and volume remain constant, the rate constant (k) will also remain constant.
To learn more about NaOH, follow the link:
https://brainly.com/question/20573731
#SPJ12
Dinitrogen and dihydrogen react with each other to produce ammonia according to the following chemical equation:N2gdinitrogen+ 3H2gdihydrogen→2NH3gammonia(i) calculate the mass of ammonia produced if 2.00 × 103 g dinitrogen reacts with 1.00 × 103 g of dihydrogen.(ii) will any of the two reactants remain unreacted? if yes which one ?(iii) what would be its mass?
(i).The mass of ammonia produced is 2.43 x 10^3 g. (ii) The 71.4 moles of dinitrogen react with 214.2 moles of dihydrogen to produce 142.8 moles of ammonia. (iii) Mass of ammonia produced in given reaction with 1 gram of dinitrogen and 3 grams of dihydrogen is 1.22 g.
Using the given masses of dinitrogen and dihydrogen, we can calculate moles of each:
dinitrogen = mass/molar mass = 2.00 x 10^3 g/28 g/mol = 71.4 mol,
dihydrogen = mass/molar mass = 1.00 x 10^3 g/2 g/mol = 500 mol
The mass of ammonia produced can be calculated as:
[tex]Mass of ammonia = moles * molar mass = 142.8 mol * 17 g/mol = 2.43 * 10^{3 }g[/tex]
Therefore, the mass of ammonia produced is 2.43 x 10^3 g.
We can calculate the mass of ammonia produced using the equation:
[tex]mass = number of moles * molar mass = 2 * 0.0356 * 17.03 = 1.22 g[/tex]
To know more about dinitrogen, here
brainly.com/question/9909261
#SPJ4
When a utensil is stored in water between uses, what are the requirements?A. Running water at any temperature, or a container of water at 70 F (21 C) or lower.B. Running water at any temperature, or a container of water at 135 F (57 C) or lower.C. Running water at 70 F (21 C) or lower, or a container of water at 70 F (21 C) or lower.D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
What 4 elements have many properties like iron?
Answer:
Cobalt, Nickel, Chromium, and Copper
Which subatomic particles have a positive and negative electrical charge?
Electrons have a negative electrical charge, whereas protons have a positive charge.
Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.
learn more about Subatomic particles here:
https://brainly.com/question/29765133
#SPJ4
Which of the following will increase the pH of an H2CO3/HCO+3 buffer solution? Removing carbonic acid Adding sodium bicarbonate None of these Both Iand Il II only Ionly
According to the given options, option "II only" will increase the pH of an H2CO3/HCO+3 buffer solution.
Buffer solution- A buffer solution is a solution that resists changes in pH when small amounts of an acid or a base are added to it.
H2CO3/HCO+3 buffer- A buffer that consists of a weak acid and its conjugate base is known as an acid-buffer or a weak acid-buffer. For example, carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−). Carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−).
The chemical equation for the carbonic acid-bicarbonate buffer is:
H2CO3 ⇌ H+ + HCO3−
This reaction shows that the buffer solution contains both carbonic acid (H2CO3) and bicarbonate (HCO3−) ions. H+ and HCO3− ions are formed when carbonic acid (H2CO3) dissociates in water (H2O).
Increasing the pH of a buffer solution- The pH of a buffer solution can be increased by adding a strong base, which would react with the buffer's weak acid to form its conjugate base. In this scenario, sodium bicarbonate (NaHCO3) is a strong base.
Therefore, option "II only" is the correct answer.
To learn more about "buffer solution", visit: https://brainly.com/question/8676275
#SPJ11
When the following two solutions are mixed:
K2CO3(aq)+Fe(NO3)3(aq)
the mixture contains the ions listed below. Sort these species into spectator ions and ions that react.
Drag the appropriate items to their respective bins.
NO3-)aq), Fe3+ , CO3 2-, K+
Part B
What is the correct net ionic equation, including all coefficients, charges, and phases, for the following set of reactants? Assume that the contribution of protons from H2SO4 is near 100 %.
Ba(OH)2(aq)+H2SO4(aq)?
The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq) is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]
When the following two solutions are mixed:
[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:
[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.
Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :
https://brainly.com/question/11510759
#SPJ11
