I am in my room (State 1). There is a 65% chance that I stay here and do my work like I am supposed to. There is a 35% chance I go get a snack and procrastinate (State 2). Once I have gone to get the snack, there is a 15% chance that I go back to work (go back to State 1), and there is an 85% chance that I get another snack and procrastinate further (stay in State 2).



Create a diagram and a transition matrix for this case.

We can conclude that Maya's experimental probabilities fluctuate around the theoretical probability, but over a larger number of trials, the experimental probabilities should converge towards the theoretical probability.

What is probability?

Probability is simply how likely something is to happen. Whenever we're unsure about the outcome of an event, we can talk about the probabilities of certain outcomes—how likely they are. The analysis of events governed by probability is called statistics.

The theoretical probability of rolling a 5 on a fair die is 1/6, which means that if the die is rolled many times, we would expect to see a 5 about 1/6 of the time.

For the first 100 trials, Maya rolled a 5 on 25 of those trials. The experimental probability of rolling a 5 in this case is:

experimental probability = number of 5's rolled / number of trials

experimental probability = 25/100

experimental probability = 0.25

So, in the first 100 trials, Maya's experimental probability of rolling a 5 was 0.25.

For the first 200 trials, Maya rolled a 5 on 30 of those trials. The experimental probability of rolling a 5 in this case is:

experimental probability = number of 5's rolled / number of trials

experimental probability = 30/200

experimental probability = 0.15

So, in the first 200 trials, Maya's experimental probability of rolling a 5 was 0.15.

Comparing these experimental probabilities to the theoretical probability, we see that after 100 trials, Maya's experimental probability of rolling a 5 (0.25) is higher than the theoretical probability (1/6 ≈ 0.167). This suggests that Maya's sample of 100 trials was somewhat biased in favor of rolling a 5.

On the other hand, after 200 trials, Maya's experimental probability of rolling a 5 (0.15) is lower than the theoretical probability (1/6 ≈ 0.167). This suggests that Maya's sample of 200 trials was somewhat biased against rolling a 5.

Overall, we can conclude that Maya's experimental probabilities fluctuate around the theoretical probability, but over a larger number of trials, the experimental probabilities should converge towards the theoretical probability. This is known as the law of large numbers, which states that as the number of trials or observations increases, the experimental probability will tend to approach the theoretical probability.

Learn more about probability on:

https://brainly.com/question/13604758

#SPJ1

We might say that Maya's experimental probabilities oscillate about the theoretical probability, but after more trials, the experimental probabilities ought to converge to the theoretical probability.

What is probability?

Simply put, probability is the likelihood that something will occur. When we don't know how an event will turn out, we can discuss the likelihood or likelihood of several outcomes. Statistics is the study of events that follow a probability distribution.

A fair die has a theoretical probability of rolling a 5 of 1/6, therefore if the die is rolled several times, we can anticipate seeing a 5 roughly 1/6 of the time.

For the first 100 trials, Maya rolled a 5 on 25 of those trials. The experimental probability of rolling a 5 in this case is:

experimental probability = number of 5's rolled / number of trials

experimental probability = 25/100

experimental probability = 0.25

So, in the first 100 trials, Maya's experimental probability of rolling a 5 was 0.25.

For the first 200 trials, Maya rolled a 5 on 30 of those trials. The experimental probability of rolling a 5 in this case is:

experimental probability = number of 5's rolled / number of trials

experimental probability = 30/200

experimental probability = 0.15

So, in the first 200 trials, Maya's experimental probability of rolling a 5 was 0.15.

Comparing these experimental probabilities to the theoretical probability, we see that after 100 trials, Maya's experimental probability of rolling a 5 (0.25) is higher than the theoretical probability (1/6 ≈ 0.167). This suggests that Maya's sample of 100 trials was somewhat biased in favor of rolling a 5.

On the other hand, after 200 trials, Maya's experimental probability of rolling a 5 (0.15) is lower than the theoretical probability (1/6 ≈ 0.167). This suggests that Maya's sample of 200 trials was somewhat biased against rolling a 5.

Overall, we can conclude that Maya's experimental probabilities fluctuate around the theoretical probability, but over a larger number of trials, the experimental probabilities should converge towards the theoretical probability. This is known as the law of large numbers, which states that as the number of trials or observations increases, the experimental probability will tend to approach the theoretical probability.

Learn more about probability on:

https://brainly.com/question/13604758

#SPJ1

Answer: Let's denote the two unknown angles as x and y.

We know that the sum of the angles in any quadrilateral is 360°, so we can set up an equation using this fact:

235° + 40° + x + y = 360°

Simplifying this equation, we get:

x + y = 85° (equation 1)

We also know that the other two angles are in a ratio of 5:12. This means that:

x/y = 5/12

Multiplying both sides by y, we get:

x = (5/12)y (equation 2)

Now we can substitute equation 2 into equation 1 and solve for y:

(5/12)y + y = 85°

(17/12)y = 85°

y = (12/17) * 85°

y = 60°

Substituting y = 60° into equation 2, we can solve for x:

x = (5/12) * 60°

x = 25°

Therefore, the two angles that are in a ratio of 5:12 measure 25° and 60°, respectively.

Step-by-step explanation:

Answer:

∠1 = 50

∠2 = 50

∠3 = 80

∠4 = 130

∠5 = 130

Step-by-step explanation:

∠1 = 180 - 130 = 50

∠2 = ∠1 = 50

∠3 = 180 - ∠1 - ∠2 = 180 - 50 - 50 = 80

∠4 = 180 - ∠2 = 180 - 50 = 130

∠5 = ∠4 = 130

Answer:

39.

Step-by-step explanation:

From the group of 10-14 hours worked per week, 8 students.

From the group of 15-19 hours worked per week, 4 students.

From the group of 20-24 hours worked per week, 12 students.

From the group of 25-29 hours worked per week, 8 students.

From the group of 30-34 hours worked per week, 4 students.

And finally, from the group of 35+ hours worked per week, 3 students.


So, 8+4+12+8+4+3 = 39 students.

Step-by-step explanation:

try this option, all the details are in the attachment.

To show that the properties of a probability distribution for a discrete random variable are satisfied, we need to verify that the probability distribution function (PDF) satisfies, The PDF must be non-negative for all values of the random variable and The sum of the probabilities for all possible values of the random variable must be equal to 1.

Let X be a discrete random variable taking values x1, x2, ..., xn, and let P(X) be the probability distribution function for X, such that P(X = xi) = pi for all i.

The PDF must be non-negative for all values of the random variable. This means that for any value xi of the random variable, the probability pi must be greater than or equal to zero. That is,

pi ≥ 0 for all i.

This property ensures that probabilities are never negative, which is a necessary condition for a valid probability distribution.

The sum of the probabilities for all possible values of the random variable must be equal to 1. That is,

∑ pi = 1 for all i.

This property ensures that the total probability of all possible outcomes is equal to 1, which is a necessary condition for a valid probability distribution.

Therefore, if the PDF satisfies these two properties, we can conclude that it represents a valid probability distribution for the given discrete random variable.

To know more about probability distribution:

https://brainly.com/question/14210034

#SPJ4

Answer:

  see attached

Step-by-step explanation:

You want to graph the function f(x) = 3/5x -5.

For graphing purposes, it is convenient to choose values of x that result in integer values of y. In this case, the multiplier of x (the slope) has a denominator of 5, so it is convenient to choose x-values that are multiples of 5.

For x = 0, y = 3/5·0 -5 = -5

For x = 5, y = 3/5·5 -5 = 3 -5 = -2

Suitable points for your plot are (0, -5) and (5, -2). These are shown in the attachment.

The quadrilaterals which have both line and rotational symmetry of order more than 1 are square, and rhombus

Symmetry is a fundamental concept in mathematics and geometry. It refers to the property of a shape that remains unchanged when it is transformed in a certain way.

Now, let's talk about quadrilaterals that have both line and rotational symmetry of order more than 1. One example of such a quadrilateral is a square.

Another example of a quadrilateral with both line and rotational symmetry of order more than 1 is a rhombus. A rhombus is a type of quadrilateral where all four sides are equal in length, and opposite angles are equal.

In summary, a square and a rhombus are examples of quadrilaterals that have both line and rotational symmetry of order more than 1.

To know more about quadrilateral here

https://brainly.com/question/29934440

#SPJ4

Complete Question:

Name the quadrilaterals which have both line and rotational symmetry of order more than 1.

Answer:

0.600 or 600, 0.500 or 500, select option 2

Step-by-step explanation:

Answer:

This is false.

Step-by-step explanation:

Since absolute value bars change negatives into positives and positive into themselves (positives) we can put the example:

[tex]-|8|\\[/tex]

When we remove the absolute value bars, 8 will still equal 8. But, we have a negative, therefore the 8 has a negative after being simplified with absolute value.

x = -8, not positive 8.

Answer:

Ther are no values of x that would make this statement true. There is no solution.

Step-by-step explanation:

The amount that LeeCo pays Macy for the office equipment at the $6,300 list price, sales terms of 3/10, n/30 FOB with payment made within the discount window, is $6,111.

A cash discount refers to a reduction in the price of an item due to payment within the discount period.

A cash discount incentivizes the customer to make prompt payments.

The list price of the equipment = $6,300

Sales terms: 3/10, n/30 FOB

Prepaid freight = $40

Cash discount = $189 ($6,300 x 3%)

Payment after the discount = $6,111 ($6,300 - $189)

Learn more about cash discounts at https://brainly.com/question/14883253.

#SPJ1

Answer:

The common difference between consecutive terms in the sequence is 8 (since -17 + 8 = -9, -9 + 8 = -1, -1 + 8 = 7, and so on). Therefore, the recursive formula for this arithmetic sequence is:

a(1) = -17

a(n) = a(n-1) + 8 for n >= 2

This formula says that the first term in the sequence is -17, and each subsequent term is found by adding 8 to the previous term.

(please mark my answer as brainliest)

The mean and standard deviation for 30 multiple-choice questions for the number of correct answers is Mean(μ) = 6 and Standard deviation(σ) = 2.19.

What is mean?

A collection of values are averaged to form the mean. The total points were divided by the total scores. When population samples are tiny, the mean is sensitive to extreme scores. For example, if two students in a class of 20 earned significantly higher than the rest, the mean will be skewed higher than the other students' scores might suggest. When using means, larger sample sizes are preferable.

Define standard deviation.

In statistics, a measure of variability known as the standard deviation ( standard deviation ) is frequently used. It demonstrates how different things are from the norm. (mean). When the SD is low, the data tend to be close to the mean, while when it is high, the data are dispersed over a wide variety of values.

Given: number of questions(n) = 30, p = [tex]\frac{1}{5}[/tex], q = [tex]\frac{4}{5}[/tex]

Mean μ = n*p

            = 30  *[tex]\frac{1}{5}[/tex]

         μ = 6

Standard deviation σ = [tex]\sqrt{n*p*q}[/tex]

                                   = [tex]\sqrt{30*\frac{1}{5}*\frac{4}{5}}[/tex]

                                   = [tex]\sqrt{4.8}[/tex]

                                σ = 2.19

To know more about Deviation visit:

brainly.com/question/23907081

#SPJ1

Step-by-step explanation:

this is the answerrr

without calculator

Angle PLE is measured at 90°. The options supplied do not contain the solution.

The acute angle is defined as being less than 90 degrees. Right angles are 90 degrees in length. Angles that are obtuse have a greater angle than 90 degrees. Discover the various sorts of angles and examples of each.

As complementary angles, ZPLA and ZELA, we can infer that:

ZPLA + ZELA = 90°

Using the following expressions in place of ZPLA and ZELA, we obtain:

5x-2 + x+8 = 90

When we simplify the equation, we obtain:

6x + 6 = 90

6 is subtracted from both sides to yield:

6x = 84

Dividing by 6, we get:

x = 14

With the knowledge of x, we can determine the dimensions of ZPLA and ZELA:

ZPLA = 5x-2 = 5(14)-2 = 68°

ZELA = x+8 = 14+8 = 22°

Therefore, we can find the measure of angle PLE by subtracting the measures of ZPLA and ZELA from 180°:

PLE = 180 - ZPLA - ZELA

PLE = 180 - 68 - 22

PLE = 90

To know more about Angle visit:-

https://brainly.com/question/28451077

#SPJ1

Answer:

The width of the frame is 10 inches.

5x7 = 35

80-35 = 45

45/7 = 6.4

5 + 6.4 = 11.4

11.4 rounded down = 11

11 - 5 = 10

Width of the frame = 10 inches

The conditions in which is it not appropriate to assume that the sampling distribution of the sample mean is approximately normal : (C) A random sample of 10 taken from a population distribution that is skewed to the right.

In statistics, the normal or Gaussian distribution is a continuous probability distribution for real-valued random variables.

The normal distribution is important in statistics and is often used in the natural and social sciences to represent real-valued random variables whose distribution is unknown. Their importance is partly due to the central limit theorem. It states that in some cases the average of many samples (observations) of a random variable with finite mean and variance is itself a random variable - whose distribution converges to a normal distribution as the size of the l sample increases.

Now,

If we look at the options given below, we see that the random samples in options A and B are normally distributed, so their sample means will be approximately normally distributed.

Similarly, option E indicates that the population is uniform, so the sample mean will also be approximately normal.

Learn more about Distribution:

https://brainly.com/question/31197941

#SPJ4

1. The diagonals are equal. Rectangle

2. All sides are equal, and one angle is 60°. Rhombus

3. All sides are equal, and one angle is 90°. Square

4. It has all the properties of parallelogram, rectangle, and rhombus. Square

5. It is an equilateral parallelogram. Rhombus

A rectangle is a four-sided figure with two sets of parallel sides, with each side being a different length. The opposite sides of a rectangle are always equal in length, so the angles of a rectangle are all 90 degrees. A rectangle can also be referred to as a quadrilateral.

A rhombus is a four-sided figure with all sides the same length. The angles of a rhombus are not all 90 degrees, but the opposite sides of a rhombus are equal in length. A rhombus can also be referred to as a diamond.

A square is a four-sided figure with all sides being the same length and all angles being 90 degrees. A square can also be referred to as a regular quadrilateral.

To learn more about quadrilateral link is here

brainly.com/question/29934440

#SPJ4

The complete question is:

Identify whether the following statements describe a rectangle, rhombus or square.

1. The diagonals are equal. ____________

2. All sides are equal, and one angle is 60°. ____________

3. All sides are equal, and one angle is 90°. ____________

4. It has all the properties of parallelogram, rectangle, and rhombus. ____________

5. It is an equilateral parallelogram. ____________

Answer:

Step-by-step explanation:

[tex]diameter=\sqrt{(5+2)^2+(5+2)^2} \\=\sqrt{49+49} \\=\sqrt{98} \\=7\sqrt{2} \\radius=\frac{7\sqrt{2} }{2} \\\approx 4.95[/tex]

Answer:

Step-by-step explanation:

yr face add more points NOW

For the given statements for domain and range, option 3 and option 4 are correct answers.

The sets of all the x-coordinates and all the y-coordinates of ordered pairs, respectively, are the domain and range of a relation. With functions, we enter various numbers, and the output is a new set of numbers. The two essential characteristics of functions are domain and range. A function's domain and range are its constituent parts.

The domain of the function are all the input values while the range are the output values of the function for the given input.

In the given options, option 3 and 4 are correct as the functions have the same input but not the same output.

That is, they have the same domain, all real numbers, but not the same range.

Hence, for the given statements for domain and range, option 3 and option 4 are correct answers.

Learn more about domain and range here:

https://brainly.com/question/30133157

#SPJ1

Answer:

Step-by-step explanation:

therefore, we have shown that: [tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex] assuming that x2 ≠ x1.

Slope refers to the measure of steepness of a line or a curve. In mathematics, slope is usually denoted by the letter "m" and is defined as the ratio of the change in the y-coordinate to the change in the x-coordinate between two points on a line.

The formula for calculating the slope between two points (x1, y1) and (x2, y2) on a line is:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex]

by the question.

To finds the slope of a line passing through two points (x1, y1) and (x2, y2), we use the slope formula:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex]

This formula represents the change in y divided by the change in x between the two points.

Now, assuming that x2 ≠ x1, we can simplify the formula as follows:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})*(1/1)[/tex]

Multiplying the numerator and denominator by 1, which in this case is (x2 - x1) / (x2 - x1), we get:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})*(x_{2}-x_{1})/(x_{2}-x_{1})[/tex]

Simplifying the numerator, we have:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})/[(x_{2}-x_{1})*1][/tex]

The term (x2 - x1) cancels out, leaving us with:

[tex]m=(y_{2}-y_{1} /1[/tex]

To learn more about slope:

https://brainly.com/question/3605446

#SPJ1

Instead of 2.00 as mentioned in the question, the semester GPA is 1.38. Please double-check your calculations or provide more details if you made an error when reporting your grades or computing your GPA.

Students must devote approximately 135 hours (45 x 3) of class, instructional, and independent time to a three credit unit course. Students who enroll in a course for four credit hours must dedicate around 180 (45 x 4) hours to it, split between in-class and out-of-class work.

You must first translate each letter grade using the common 4.0 scale into its equivalent numerical number before you can determine your semester GPA:

A = 4.0

B = 3.0

C = 2.0

D = 1.0

F = 0.0

E = 0.0 (equivalent to F)

Then, you can use the formula:

(Total grade points) / GPA (total credit hours)

Using this formula, we can calculate your semester GPA as follows:

FYE 105: F (0.0) x 3 credit hours = 0.0 grade points

MAT 150: E (0.0) x 3 credit hours = 0.0 grade points

ENG 101: D (1.0) x 3 credit hours = 3.0 grade points

BIO 112: A (4.0) x 3 credit hours = 12.0 grade points

BIO 113: B (3.0) x 1 credit hour = 3.0 grade points

Total grade points = 0.0 + 0.0 + 3.0 + 12.0 + 3.0 = 18.0

Total credits earned is 13 (3 + 3 + 3 + 3 + 1)

GPA = 18.0 / 13 = 1.3846

To know more about semester GPA visit:-

https://brainly.com/question/13871451

#SPJ1

Answer:

The critique of the sample method and survey used by the guild is as follows:

In summary, the survey used by the guild suffers from various types of bias, which may affect the validity and generalizability of the results. To improve the validity and reliability of the survey, the guild should use random sampling and address issues such as non-response and response bias.

The result of the division in ordinary decimal notation is 300.

Scientific notation, also known as standard form or exponential notation, is a method of expressing very large or very small numbers in a compact and standardized way.

To perform the indicated operation, we need to divide 0.00036 by 0.0000012.

First, let's express both numbers in scientific notation

0.00036 = 3.6 x 10^(-4)

0.0000012 = 1.2 x 10^(-6)

Now we can divide the two numbers and simplify

3.6 x 10^(-4) / 1.2 x 10^(-6) = (3.6 / 1.2) x 10^(-4-(-6)) = 3 x 10^(2)

Finally, we can convert this result back to ordinary decimal notation

3 x 10^(2) = 300

Learn more about scientific notation here

brainly.com/question/18073768

#SPJ4

The given question is incomplete, the complete question is:

Convert each number to scientific notation and perform the indicated operations. Express the result in ordinary decimal notation. 0.00036/0.0000012

Answer:

No

Step-by-step explanation:

Since a polygon has straight sides, with 3 or more, it cannot be a polygon since one side is curved.

The graph repeats itself every 32 units hοrizοntally. [ The graph is attached belοw ]

An interactive widget in a graph is a tοοl that allοws the user tο manipulate different elements οf the graph using their mοuse οr tοuch screen.

Interactive widgets can be used tο explοre the behaviοr οf a functiοn οr dataset in a mοre dynamic and engaging way than a static graph.

Sοme cοmmοn examples οf interactive widgets in graphs include sliders, buttοns, checkbοxes, and drοpdοwn menus.

Here we have

y = -5 cοs (π/16 x) - 4    

Represents a periοdic functiοn with a cοsine wave shape that is shifted dοwnwards by 4 units.

The cοsine functiοn οscillates between -1 and 1, sο multiplying it by -5 stretches the wave vertically by a factοr οf 5 and reflects it acrοss the x-axis.

The cοefficient οf x, π/16, cοntrοls the periοd οf the functiοn, which is the distance between twο cοnsecutive peaks οr trοughs οf the wave.

Specifically, the periοd οf this functiοn is 32 units, since the cοsine functiοn has a periοd οf 2π and 2π/(π/16) = 32.

Therefοre,

The graph repeats itself every 32 units hοrizοntally. [ The graph is attached belοw ]

Learn more Graphs at  

https://brainly.com/question/29252829

#SPJ1