Answer:
What happens to the density of an object if the object is cut in half? ... The density remains the same because cutting the object in half will divide the mass & volume by the same amount. Also, the density of a substance remains the same no matter what size it is.
Explanation:
What happens to the density of an object if the object is cut in half? ... The density remains the same because cutting the object in half will divide the mass & volume by the same amount. Also, the density of a substance remains the same no matter what size it is.
define specific heat capacity
What is the formula for Charles Law?
Answer:
Explanation:
V_{1} = first volume
V_{2} = second volume
T_{1} = first temperature
T_{2} = second temperature
A bowling ball of 35.2kg, generates 218 kg.m/s units of momentum. What is the velocity of the bowling ball?
Answer:
6.19m/s
Explanation:
Given parameters:
Mass of bowling ball = 35.2kg
Momentum = 218kgm/s
Unknown:
Velocity of the bowling ball = ?
Solution:
Momentum is the quantity of motion a body possess;
Momentum = mass x velocity
218 = 35.2 x velocity
Velocity = 6.19m/s
Derive Isothermal process through ideal gas.(anyone plzz!!)
Answer:
Hey, bro here is the explanation....
Explanation:
Hope it helps...
A 5 kg ball of clay is moving with a speed of 25 m/s directly toward a 10 kg ball of clay which is at rest. The two clay balls collide and stick together. What is their velocity immediately after the collision?
Answer:
8.3m/s
Explanation:
Given parameters:
mass of clay ball = 5kg
Speed of clay ball = 25m/s
mass of clay ball at rest = 10kg
speed of clay ball at rest = 0m/s
Unknown:
Velocity after collision = ?
Solution:
Since the balls stick together, this is an inelastic collision:
m1v1 + m2v2 = v(m1 + m2)
5(25) + 10(0) = v (5 + 10)
125 = 15v
v = 8.3m/s
How much potassium nitrate (KNO3) would dissolve in 50 milliliters of water at 45ºC given that 55g of KNO3 is dissolved in 150mL of water at 45°C.
A. 19.7g
B. 15.1g
C. 18.3g
D. 23.3g
A softball and a baseball are launched from 2 different pitching machines at the same time.
th
Softball
182 g
165 m/sec
Baseball
143 g
112 m/sec
Which of these BEST explains what factors give the baseball and softball different velocities?
O mass and speed
O mass and direction
O speed and direction
O size and mass
The difference between temperature and thermal energy is that___________.
Answer:
Heat vs temperature - Energy Education The core difference is that heat deals with thermal energy, whereas temperature is more concerned with molecular kinetic energy. Heat is the transfer of thermal energy, whereas temperature is a property the object exhibits.
this is a voice recording of the text of a book that you listen rather than read.
Look at the atoms below
a. Atom W: 9 protons and 9 neutrons
b. Atom X: 8 protons and 9 neutrons
c. Atom Y: 9 protons and 9 neutrons
d. Atom Z: 9 protons and 10 neutrons
Which ones below are isotopes of each other and why?
element z are isotopes because number of netron are different and number of protons are same
Intensitatea curentului electric a unui circuit este de 123A iar sarcina electrica este de 1,7C sa se afle intervalul de timp in care este transportata sarcina electrica
The intensity of the electric current of a circuit is 123A and the electric charge is 1.7C to find the time interval in which the electric charge is transported.
Given that,
Current, I = 123 A
Electric charge, q = 1.7 C
To find,
The time interval in which the charge is transported.
Solution,
The electric current is given by electric charge per unit time. So,
[tex]I=\dfrac{q}{t}\\\\t=\dfrac{q}{I}\\\\t=\dfrac{1.7}{123}\\\\t=0.0138\ s[/tex]
So, the required time is 0.0138 seconds.
if I accelerated at a rate of 20 mi/hr/s how fast would I be going after 5 seconds?
Answer: 100
Explanation: 20 *5=100
Hope this helps!!Brainlist?plz
What must happen to an object in order to accelerate it?
Answer:
For an object to accelerate, appropriate force must be applied to the object to cause it to change it’s velocity if it’s already in motion. However, to cause it to overcome static friction if it is at rest, and cause it to change it’s velocity
Explanation:
I think this is physics?
A student wants to calculate the density of the two objects shown below:
A Metal Cube and a Small Statue.
Describe the methods that the student should use to calculate the densities of the two objects.
ASAP please this piece of work is already late XD
Answer:
Okay
Explanation:
First we should quickly remind ourselves of the equation for density:density= mass/ volumeTo calculate the density we need a method of measuring the mass of each object and another method for measuring the volume of each object. To measure the mass in both cases we can simply use a measuring balance. To measure the volume we will need to use 2 separate methods. For the cube we can simply measure the length, height and depth with a ruler, multiply our measurements and we obtain the volume. The statue is a little more tricky because it has an irregular shape so we can't use the ruler anymore. Instead we should use graduated tank/trough of water. First of all measure the amount of water in the tank before putting in the statue. Then submerge the statue in the water and take another measurement of the volume of water in the tank. The statue will displace the water in the tank giving a higher value. We finally subtract the initial volume from the final volume and we should obtain the volume of the statue.We now have all the measurements necessary to calculate the density of both objects!
A car traveled 1,215 km West from El Paso to Dallas in 13.5 hours. What was its velocity?
A. 90m/s West
B. 90km/h
C. .09km/h West
D. 90km/h West
Answer:
D. 90km/hr due West
Explanation:
Given parameters:
Displacement = 1215km
Time = 13.5hr
Unknown:
Velocity = ?
Solution:
Velocity is the displacement divided by the time taken;
Velocity = [tex]\frac{displacement}{time}[/tex] = [tex]\frac{1215km}{13.5hr}[/tex] = 90km/hr
Velocity is 90km/hr due West
If an oceanic plate and a continent plate converge, or push towards each other, which plate will sink under the other one?
Answer:
The oceanic plate will sink under
Explanation:
Due to erosion over time and the sudden shift, the continental plate will rise causing earthquakes, tsunami’s, etc..
A plane flew at a speed of 600 km/hr for a distance of 1500 km,
How long did take to get to its destination
Explanation:
600 ÷ 60 = 10
1500 ÷ 10 = 150 minutes
I don't know how you should express the answer in:
So it's either 150 minutes or 2 hours and 30 minutes.
(This is kind of like mathematics, not physics)
Write a message to Mr. Chang explaining why the groundwater heating system will warm the school more than the water heater system. Use evidence to support your claim. For each piece of evidence you use, explain how the evidence supports your claim.
Answer:
For, heating purposes more the quantity of water more will be the heating. Clearly, underground heating would have more water and hence, it will have edge over the water heater system.
Moreover, for things at the same temperature, the thing with more molecules has more total kinetic energy (thermal energy) than the thing with fewer molecules. The groundwater heating system uses heat from the heat stored naturally in groundwater or aquifers. Thus, saving the cost of power required to heat in normal water heater.
Explanation:
The groundwater heating system will warm the school more than the water heater system due to the fact that it uses more water more than the other system.
Based on the complete question, it should be noted that the addition of energy leads to an increase in motion which results in the rise in temperature.
The groundwater heating system will warm the school more than the water heater system due to the fact that it uses more water more than the other system even though its water isn't as warm as in the other system.
Read related link on:
https://brainly.com/question/20116115
Why does a concave lense always form a virtual image?
Answer:
Concave lens spreads out light rays that are then refracted through it.: A concave mirror or a converging lens will only produce a virtual image at a point if the image is located beyond the focal point. By the focal point, we define the point that is more than one focal length away.
3 conditions that may be
required for a chemical reaction to occur.
10 POINTS QUESTION: Why both are models for monomers, polymers, and cross-linked polymers
Answer:
Because both monomers and polymers and cross linked polymers are mers with physically properties which is good for applycations
Explanation:
because they are good for using and not using
also, this is a 5 point question, you are not fooling anyone. thx for 5 points tho
When you listen to the radio, watch TV, or cook food in a microwave, you are making use of properties of electromagnetic waves. Which statement about electromagnetic waves is false?
A. White light is the absence of all color.
B. Higher-frequency electromagnetic waves have more energy.
C. The sun radiates several different types of electromagnetic energy.
D. The frequency of an electromagnetic wave is related to its wavelength.
Answer:
A. White light is the absence of all color.
Explanation:
It is false that white light is the absence of all color. In fact, white light is the presence of all colors in the spectrum.
Electromagnetic waves are waves that do not require any material medium for propagation. It is the interaction of electric and magnetic fields.
The higher frequency electromagnetic waves like the gamma-rays and x-rays have more energy. The sun furnishes the universe with electromagnetic energy. The higher the wavelength, the lesser the energy of the electromagnetic radiation.which unit would be most
suitable for its scale?
Answer:
down below
Explanation:
for a scale, kg is used, as well as grams
for force, newtons is used
What state of matter can easily be compressed (squeezed into a much smaller space)? *
gases
solids
solids, liquids, and gases
liquids
Answer:
gases.
Explanation:
gases have the highest volume. if you compress (increase pressure) a gas, the volume decreases and it will take up less space as a liquid, and if you compress more, the liquid will become a solid.
additionally info: this is generally true, but as you get into more difficult subjects, this rule does not hold. for example, some substances cannot obtain a certain phase of matter when they are a certain temperature and or pressure. but that could be way more out of this questions league.
You slide a 15 kg box down a ramp with friction set to an angle of 38°. If the height of the ramp is 1.2 m, what's the frictional force on the box as it gets to the bottom of the ramp if the applied force down the ramp is 52 N?
Answer:
38.75N
Explanation:
According to Newton's second law
\sum Fx = ma
Fm-Ff = ma
Fm is the moving force
Fm = mgsin theta
Fm = 15(9.8)sin38
Fm = 90.5N
Ff is the frictional force
m is the mass = 15kg
a is two acceleration
Get the acceleration
a= F/m
a = 52/15
a ,= 3.45m/s²
Substitute the given values into the formula
90.5-Ff = 15(3.45)
90.5-Ff = 51.75
Ff = 90.5-51.75
Ff = 38.75N
Hence the frictional force on the box is 38.75N
what happens if I increase the height of a skater
Answer:
The higher the skater is the more potential energy he has. As his height decreases, his potential energy decreases and his kinetic energy increases.
Explanation:
Make me BRAINLIST please
Answer:
The higher the skater is the more potential energy he has. As his height decreases, his potential energy decreases, and his kinetic energy increases. ... Explore how the skater's change in speed relates to the potential and kinetic energy of the skater.
Explanation:
(Via Uteach)
Starting from rest, a sprinter reaches his top velocity in 3 seconds. He runs a distance of 24m in 3 seconds. What is his acceleration? (Assume his acceleration is uniform)
Answer:
[tex]a=5.34\ m/s^2[/tex]
Explanation:
Given that,
Initial velocity of a sprinter, u = 0
He runs a distance of 24m in 3 seconds.
We need to find his acceleration. Let a be his acceleration. Using second equation of kinematics to find it.
[tex]s=ut+\dfrac{1}{2}at^2\\\\24=0+\dfrac{1}{2}a(3)^2\\\\a=\dfrac{24\times 2}{9}\\\\a=5.34\ m/s^2[/tex]
So, the acceleration of the sprinter is [tex]5.34\ m/s^2[/tex].
The acceleration of the sprinter from rest to his top speed is 5.33m/s²,
Given the data in the question
Since the sprinter starts from rest,
Initial velocity; [tex]u = 0[/tex]Time taken; [tex]t = 3s[/tex]Distance covered; [tex]s = 24m[/tex]Acceleration; [tex]a = \ ?[/tex]
To determine the acceleration of the sprinter, we use the second equation of motion:
[tex]s = ut + \frac{1}{2}at^2[/tex]
Where s is distance covered, u is initial velocity, a is acceleration and t is time.
We substitute our given values into the equation
[tex]24m = [0 * 3s] + [\frac{1}{2} * a * (3s)^2]\\\\24m = \frac{1}{2} * a * 9s^2\\\\24m = a * 4.5s^2\\\\a = \frac{24m}{4.5s^2} \\\\a = 5.33m/s^2[/tex]
Therefore, the acceleration of the sprinter from rest to his top speed is 5.33m/s²
Learn more: https://brainly.com/question/18835025
The two blocks shown below have masses m1 = 400 g and m2 = 600 g. They are connected by a string and lie on a frictionless tabletop. A 3.5 N force is applied to block m2, pulling it to the right. Find the acceleration then find the tension force in the string between two objects
A lift travelling up to the top floor of the Empire State building with a mass of 4200kg and a kinetic energy of 4116J. Find the velocity
Answer:
1.4 m/sExplanation:
The velocity can be found by using the formula
[tex]v = \sqrt{ \frac{2k}{m} } \\ [/tex]
k is the kinetic energy
m is the mass
From the question we have
[tex]v = \sqrt{ \frac{2 \times 4116}{4200} } \\ = 1.4[/tex]
We have the final answer as
1.4 m/sHope this helps you
Answer:
The speed of the lift is 1.4 m/s
Explanation:
Kinetic Energy
Is the type of energy of an object due to its motion. It's proportional to the square of the speed and the mass.
The equation for the kinetic energy is:
[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]
Where:
m = mass of the object
v = speed at which the object moves
The kinetic energy is expressed in Joules (J)
It's given the mass of the lift as m=4,200 kg and its kinetic energy K=4,116 J. To calculate the speed (magnitude of velocity), we solve the formula for v as follows:
[tex]\displaystyle v=\sqrt{\frac{2k}{m}}[/tex]
[tex]\displaystyle v=\sqrt{\frac{2*4,116}{4,200}}[/tex]
[tex]\displaystyle v=\sqrt{1.96}[/tex]
v = 1.4 m/s
The speed of the lift is 1.4 m/s
Compare between Convex lens and concave lens
Answer:
A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses.
