Answer:
[Ar]4s²
Explanation:
The electronic configuration of calcium is given as follows;
1s²2s²2p⁶3s²3p⁶4s²
The electronic configuration of argon, Ar is 1s²2s²2p⁶3s²3p⁶
Given, that there is a similarity be tween the electronic configuration of all the shells of the an atoms of argon and an atom calcium, except for the added valence shell electrons in calcium, the electronic configuration of calcium can be represented by the symbol of an atom of argon, followed by the electonic configuration of the valence shell as follows
The electronic configuration of calcium with argon as base = [Ar]4s².
Do Compounds always have the same physical properties as the elements they are made of
Answer:
No
Explanation:
The physical and chemical properties of substances are usually difference from those of the elements that makes them up.
Compounds are substances composed of two or more kinds of atoms joined together in a definite grouping.
The properties of a compound are distinct and different from those of the individual elements that are combined in its make-up.
a snail slowly moves along at 3 ft/hr. what type motion velocity ,distance, speed acceleration displacement Please answer need it now!!!!!
Answer:
motion - forward
velocity - 3ft/hr
distance - 3 ft/hr
speed - 3 ft/hr
acceleration - none
displacement - ?????
Explanation:
why do you think you can find silver and gold on their own in rocks but calcium and magnesium are combined with other elements to make compounds such as calcium carbonate and magnesium sulfate?
Explanation:
Silver and Gold belong to a special group of metals known as the native metals. They are found naturally on their own and not in combined form in rocks.
These metals are found uncombined because they are unreactive. They prefer to alloy with themselves. Calcium and magnesium on the other hand are reactive metals. The unreactivity of these metals makes them uncombined in nature.ihsusbydnuhzkuhd nuziw
A cat runs across a road that
is 9 meters (m) wide. It
covered this distance in 3
seconds (s). What is the
speed of the cat?
!!!!! HELP DUE IN 2 MIN !!!
A graph titled Position versus time for with horizontal axis time (seconds) and vertical axis position (meters). The line runs in 3 straight segments from 0 seconds 0 meters to 4 seconds 12 meters to 6 seconds 12 meters to 12 seconds 0 meters.
Use the graph to determine the instantaneous speed at 2 seconds.
m/s
What is the average speed over the entire trip?
m/s
Answer: 3, 2
Explanation: right on edge 2020
Answer:
The answer are 3 and 2
Explanation:
just took it
7th grade help me plzzzzzzzzzz
The temperature of a sample of gas in a steel tank at 0.30 ATM at 25 Celsius if the pressure W20.59 ATM what would be the final temperature inside the tank in kelvin
The final temperature : 313.06 °C
Further explanationGay Lussac's Law
When the volume is not changed, the gas pressure is proportional to its absolute temperature
[tex]\dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]
P1=0.3 atm
T1=25 + 273=298 K
P2=0.59 atm
[tex]\tt \dfrac{0.3}{298}=\dfrac{0.59}{T_2}\\\\T_2=586.06=313.06~^oC[/tex]
Karsten performed a scientific study on the way that a certain chemical affects ecosystems. After Karsten published his results, one of his peers said that Karsten's conclusion was influenced by selection bias. What did Karsten's peer mean by this statement?
A.
Karsten did not choose the correct topic to study.
B.
Karsten did not spend enough time studying the chemical.
C.
Karsten's data did not support his published conclusion.
D.
Karsten's results could have been different in other ecosystems.
Answer:
C
Explanation:
I NEED HELP!!
In a stream, how are particles such as silt, clay, and sand carried?
A. as dissolve load
B. as bed load
C. in suspension
D. in solution
In a stream, how are particles such as silt, clay, and sand carried?
A. particles rubbing together
B. An increase is suspended materials
C. an increase in the dissolve load
D. changes in the stream 's carrying capacity
The path of a stream can vary considerably, depending on the slope of the land and the
A. bedload of the stream
B. amount of rainfall
C. amount of hummus present in the soil
D. Type of material through which the stream flows
The amount of dissolved material that stream water carries is usually expressed in
A. cubic meters per second
B. parts per million
C. cubic feet per minute
D. grams per 1000 gallons
The carrying capacity of a stream depends on both the velocity and the
A. Temperature of the water
B. amount of water in the stream
C. type of material through which the stream flows
D. minerals dissolved in the stream
Answer:
1 B
2A
#D
3B
1D
2B
3C
4A
A,C,A,B
C,A,C,A
C,A,A,B
Explanation:
Easy ive done this brings back memories
In ecosystem, particles are carried as bed load by rubbing particles together.Path of stream can be varied depending on amount of humus present in soil and is measured in cubic meters per second and carrying capacity depends on type of material through which stream flows.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ2
Do you agree or disagree with the statement: "A rise of -7°C" means "a fall of 7°C"? Explain.
Answer:
i would agree
Explanation:
The cardiovascular and respiratory systems interact to
A. send and receive messages to and from all parts of the body.
B. digest and transport food to cells in all parts of the body.
C. transport and exchange gases needed by cells in all parts of the body.
D. sense and react to changes in the environment.
Answer:
c
Explanation:
Colleen waters the plants in her greenhouse once every day. She wants to find out if the plants will grow more leaves if they are watered more often. She counts the number of leaves on each plant before she starts. She then continues to water half of each type of plant once daily, but she waters the other half of each type twice a day. What is the dependent variable in Colleen's experiment?
Which of the following might be included in a chemical
reaction?
a Molecules
b lons
C Pure elements
d All of the above
Answer:
D. All of the above
Explanation:
Molecules, ions, and pure elements might be included in a chemical reaction. Therefore, option (d) is correct.
What is a chemical reaction?A chemical reaction can be described as a reaction that brings the chemical conversion of one chemical substance to another chemical substance. The reactions cause chemical changes that include the rearrangement of electrons in order to create and break bonds between atoms.
The compound or molecules which are primarily utilized in a reaction are called reactants. Chemical reactions give products, which possess characteristics different from the reactants of the reaction.
Chemical reactions take place at a definite rate of reaction at a given concentration, temperature, and pressure. The rate of reaction increases with the rising temperature of the reaction as more activation energy is available for reactant molcules collisions.
Therefore, in a chemical reaction reactants and products can be present as Molecules, ions, and pure elements.
Learn more about Chemical reactions, here:
brainly.com/question/22817140
#SPJ2
What is the area on the earth's surface directly above where an earthquake originates?
Answer:
The epicenter
How do the products of chemical reactions compare to their reactants? Question 5 options: The products usually weigh more than the reactants. The products often have completely different properties than the reactants. The products usually have more atoms than the reactants. The products are usually more toxic than the reactants.
Answer:
The products often have completely different properties than the reactants.
Explanation:
In a chemical reaction, the products are often completely different from the reactants.
When chemical reactions takes place, the species rearranges to form new bonds and to attain stability.
Therefore, the new products formed usually have completely different properties when compared to the reactants.
Also, in chemical reactions, mass is always conserved. The mass of the products and reactants are usually the same.
There are 70 fisherman and 5 sea bass in the lake. Are sea bass considered a limiting factor?
Answer:
yes
Explanation:
The end result of ecological succession is called?
1.) Primary Ecosystem
2.) Secondary Ecosystem
3.) Climax Community
4.) none of these
What is the opposite force to pushing off the ground to jump?
Answer:
Newton's Third Law of Motion states that to every action there is an equal and opposite reaction. When the earth pushes on you to send you into the air after jumping, you also push on the earth with the same force. But forces are different from accelerations. A force F is a push or pull on an object
Explanation:
Answer:
Friction
Explanation:
Friction causes an opposite force
which best represents a compound?
Answer:
The one above B
Explanation:
The one above B is most represents a compound because compounds are chemically bonded and are always near each other.
There are eight markers in a full set, but Flora and Frank each only have seven markers. Flora is missing the red marker, and Frank is missing the blue marker.
What can they do so that each has a full set of markers?
Answer:
Put their markers together, now they have each color
Explanation:
Answer:
They should share the colors that they are missing
Explanation:
That way, they would both have each color
please help me
Read the passage and examine the photos. Then, suggest two reasons that scientists think developing pollen grains made vascular plants the most successful plants that live on land.
Passage
These mosses are nonvascular plants that grow closely packed together in moist places. The sperm they produce for sexual reproduction must swim to a nearby plant that has an egg that the sperm may fertilize.
Seed plants, such as these conifers, are vascular plants that live in both moist and dry places. For sexual reproduction, conifers produce pollen grains that contain sperm that cannot swim. Conifers produce massive amounts of pollen grains that can be carried by wind.
Answer:
Vascular plants are successful due to better transportation for water, nutrients and reproduction.
Explanation:
I got it right at school and hope this helps you learn to STUDY.jk
According to scientists, the evolution of pollinators made vascular plants the most successful land plants for two major reasons:
Sperm can be more effectively and widely distributed for sexual reproduction, thanks to pollen grains.Vascular plants can reproduce without the need for a moist environment because they can make pollen grains.What are Pollen grains?Plants with seeds, including flowering plants and conifers, produce pollen grains as a component of their reproductive process. They are often carried by wind or pollinators, such as bees, to the female reproductive organs of the same or different plant species, where they can fertilize female gametes (egg cells) and begin the development of seeds.
They carry the male gametes (sperm cells) of the plant. Many plant species depend on pollen grains for successful reproduction, and these grains have evolved a variety of forms, sizes, and surface features that make them easier to disperse and be recognized by pollinators.
Therefore, according to scientists, the evolution of pollinators made vascular plants the most successful land plants for two major reasons:
Sperm can be more effectively and widely distributed for sexual reproduction, thanks to pollen grains.Vascular plants can reproduce without the need for a moist environment because they can make pollen grains.Learn more about Pollen grains, here:
https://brainly.com/question/12243753
#SPJ2
Which statement correctly describes protons and neutrons? *
O They have the same mass and the same electrical charge.
They have different masses but the same electrical charge.
O They have different masses and different electrical charges.
They have the same mass but different electrical charges.
Answer:
They have the same mass but different electrical charges.
Explanation:
Protons have a positive charge while neutrons have a neutral charge. Although they have different charges, they have the same amount of mass.
The protons and neutrons have the same mass but different electrical charges. THerefore, option (D) is correct.
What is a proton?A proton is described as a stable subatomic particle, a chemical symbol with +1e elementary charge. The mass of the proton is approximately equal to the mass of the neutron but 1836 times the mass of an electron.
Protons and neutrons are jointly together termed "nucleons" each with masses of approximately one atomic mass unit (a.m.u.). There will be one or more than one proton present in the nucleus of an atom. There is an attractive electrostatic central force that holds the atomic electrons.
The number of protons in the atom is referred to as the atomic number and is expressed by the symbol Z. Since each element in the periodic table has a unique number of protons, determines the chemical characteristics of the element.
As the neutrons present in the nucleus of an atom are neutral and do not carry any charge while the protons are positively charged.
Learn more about protons, here:
brainly.com/question/12535427
#SPJ2
Learning Task No. 3: Write a short paragraph regarding the differences between
saturated and unsaturated solutions.
Type of Solution
Explanations about the differences of
the two solutions
Saturated solution
Unsaturated solution
Answer:
See explanation
Explanation:
A saturated solution is a solution that contains just as much solute as it can normally hold at a given temperature in the presence of undissolved solute. An unsaturated solution contains less solute than it can normally hold at a given temperature. A saturated solution can not dissolve more solute whereas an unsaturated solution can comfortably dissolve more solute until it attains saturation at a specified temperature.
Calculate the average atomic mass of element Q, if the isotopic composition of element Q is as follows: Q-107 has an abundance of 78%, and Q-110 has an abundance of 22%. Type your answer rounded to two decimal places.
Answer:
5
Explanation:
What will most likely happen if you place a piece of metal in a base?
O A. The metal will turn into a salt.
O B. The metal will neutralize the base.
C. The metal will give off a gas.
O D. The metal will not react with the base.
Answer:D
Explanation:
The metal will not react
Salt is a common example of a(n) _____________ bond, while Water is a common example of a(n) _____________ bond.
Answer:
salt is ionic bond and water is Polar covalent bond
Explanation:
what form of heat transfer makes warm air rise?
This is a change in an objects motion caused by an unbalanced force
Answer:
This is a change in an objects motion caused by an unbalanced force.
- Acceleration
Answer:
Pressure
Pressure is done when a force is applied to an object to course a motion
The diagram below shows what happens to an atom of uranium-235 when bombarded by a neutron. Which isotope is represented by X in the diagram?
Answer:
X represents barium - 141 nucleus.
Written as: (141, 56) Ba
Explanation:
In nuclear fission reaction, due to the fact that the process produces more neutrons, a nuclear chain reaction can possibly occurr. Now, a chain reaction is a one whereby the material that begins the reaction will also be one of the products and it can start another reaction.
Now, for the nuclear chain reaction for the fission of uranium-235, its nucleus absorbs a neutron after which it splits into a krypton - 92 nucleus and a barium - 141 nucleus. Thereafter it releases three more neutrons.
Thus, X is the image represents barium - 141 nucleus.
(141,56) Ba
What type of bond (Ionic, Covalent or Metallic) would be created when carbon bonds with bromine?
Answer:
Covalent bond
Explanation:
(pls give me brainliest) <3
