I need help with this problem on science 8th grade here is the picture of the assignment place help me

Answer:

35%

Explanation:

Answer:

its 83

Explanation:

Answer:

Potential energy does not have an absolute measurement. It is always relative to some reference point. Gravitational potential always increases when you go up and decreases when you go down. But the choice of a zero point is arbitrary.

If you’re dropping objects onto the ground, then choosing the ground as a zero point makes the calculations easier. But you could just as easily make the zero point the top of Mt. Everest, and all the answers would turn out the same. Up still means more energy and down means less, but now the PE of an object at sea level would have a negative sign, but not as negative as an object ten meters above sea level.

So everything would still work fine.

In fact, planetary astronomers take this idea to extremes. Instead of the top of Mt. Everest, they set the zero point for potential energy as infinitely high—so far “up” that gravity is so weak that going “up” another kilometer doesn’t gain you any energy. Then the value for potential energy everywhere else in the universe anywhere near a planet has a negative sign, but just as before, all the answers in relative terms turn out fine.

Explanation:

PLEASE MARK ME AS BRAINLIEST

Answer:

4.2 m/s

the balls final speed is V (m/s)

because the clay ball hits another and the two stick together

=> 0,35.4,2 + 0,35.4,2 = (0,35 + 0,35).V

<=> 2,94 = 0,7V

<=> V = 2,94/0,7 = 4,2

For a clay ball with a mass of 0.35 kg, the ball's final speed is mathematically given as

V2= 4.2

Question Parameter(s):

A clay ball with a mass of 0.35 kg

Hits another 0.35 kg ball at rest and the two stick together.

The first ball's initial speed is 4.2m/s.

Generally, the equation for the conservation of momentum is mathematically given as

M1v1=m2v2

Therefore

0.35*4.2 + 0.3*5.4.2 = (0.35 + 0.35)*V

2,94 = 0,.7V

V2 = 2.94/0.7

V2 = 4.2

In conclusion

V2= 4.2

Read more about Speed

https://brainly.com/question/4931057

#SPJ2

Answer:

Explanation:

F = qE

F is the force in Newtons

q is the test charge

E is the electrical field produced by the source charge

[tex]5=q(50)\\q=1*10^-^1Coulombs[/tex]

The magnitude of charge on the object is of 0.1 C.

Given Data:

The magnitude of electric field is, E = 50 N/C.

The magnitude of Electric force is, F = 5 N.

The region where any particle feels the effect of electric force on itself, due to other charged entities, is known as Electric field. And the relation between the electric force and electric field is given as,

F = E × q

Here,

q is the magnitude of charge on the object.

Solving as,

q = F/E

q = 5 / 50

q = 0.1 C

Thus, we can conclude that the magnitude of charge on the object is of 0.1 C.

Learn more about the electric field here:

https://brainly.com/question/8971780

Answer:

Distance, S = 15m

Explanation:

Given the following data;

Mass = 4kg

Force = 10N

Initial velocity = 5m/s

Final velocity = 10m/s

To find the distance;

First of all, we would calculate the acceleration

Force = mass * acceleration

10 = 4*acceleration

Acceleration = 10/4

Acceleration = 2.5m/s²

Now to find the distance, we would use the third equation of motion.

[tex] V^{2} = U^{2} + 2aS [/tex]

Where;

S represents the displacement measured in meters.

Substituting into the equation, we have;

10² = 5² + 2*2.5*S

100 = 25 + 5S

5S = 100 - 25

5S = 75

Distance, S = 75/5

Distance, S = 15m

Answer:

Earth's rotation and orbit and the Moon's orbit cause observable patterns (Day and night, seasons, phases of the Moon, tides).

Answer:

All of the Above

walking

Explanation:

Girls have two X Chromosomes while boys have one X Chromosome and, as you now know, one Y Chromosome. So girls are XX and boys are XY.

Answer: The X and Y chromosomes, also known as the sex chromosomes, determine the biological sex of an individual: females inherit an X chromosome from the father for a XX genotype, while males inherit a Y chromosome from the father for a XY genotype (mothers only pass on X chromosomes).

Explanation:

Answer:

no im in a rehab program so we eat the sam shi every day

Explanation:

brainlest?

Explanation:

During lockdown, I ate LOADS OF JUNK FOOD. TRUST ME!!

I gained 14 kg of weight and became 68 kg

just due to junk food.I am 13 btw and at that time I was 5 feet 4 so definitely fat. all those pizzas and burgers and all.then I realised that I have gained weight. I have to REDUCE MY WEIGHT. I am quite determined on what I say. it took me 3 months or so and I finally got back to my original weight. How? just by going for a stroll everyday, eating healthy and constantly working out. eating less is not the solution,eating less calories is the solution.Also, by eating healthy food,I grew taller. I am 5 feet 6 now. So yes, definitely it helps put alot and keep eating healthy food and you will definitely be healthy.

Thank You.

Answer & Explanation:

The acceleration due to gravity is about 10 m/s^2.

That means a the speed of a falling object will increase by 10 m/s every second that it falls.

We know that the lamp hits the ground at 15 m/s.

That means the lamp has been falling for

[tex]\frac{15 m/s}{10 m/s^{2} } = 1.5 s[/tex]

Now we use the formula  [tex]h = \frac{1}{2} gt^{2}[/tex]  to calculate the height, where

h is the height

g is the acceleration due to gravity and

t is the time taken to fall a height of h.

h = 1/2 x 10 x 1.5^2 = 11.25 m

Answer:

Explanation:

the answer is C.)

The torque produced by a perpendicular force of 75 N at the end of a 0.2 m wrench is 15 Nm.

The force which causes the object to rotate about any axis is called torque. In math form, it is equivalent to the product of force and perpendicular distance.

Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.

Given:

The perpendicular force on the wrench, P = 75 N,

The length of the wrench, r = 0.2 m,

Calculate the torque of the wrench as shown below,

The torque of the wrench = r × P × sin a

Here, the force is perpendicular hence, a = 90°

The torque of the wrench = 0.2 × 75 × sin90

The torque of the wrench = 15 × 1

The torque of the wrench = 15

Thus, the torque on the wrench is 15 Nm.

To know more about torque:

https://brainly.com/question/28220969

#SPJ2

Answer:

Explanation:

it's blocked for me...it was unblocked but you know how everything else is blocked

Answer:

Maximum Height

Explanation:

The maximum height is the highest point reached by a projected body. At this point, final velocity, v of the body is equal to 0; because upward motion is at its peak and the body start to fall again.

Hence, final velocity v is always 0 at this maximum point and the direction of motion changes from upward to downward.

Final velocity at this maximum height is zero because of the directional change experied by the object and the fact that upward motion of the body terminates at this point.

Answer:

C. lonic bonds involve the transfer of electrons between ions, while

Van der Waals forces involve the attraction of nonpolar molecules.

Explanation:

Just did it

Answer:

The amount of mechanical energy produced by the old lorry when 600 Joules of chemical energy have been used by the engine, M.E. is 120 Joules

Explanation:

The question is a word problem on the relationship between energy efficiency and energy consumption

The given parameters of the old lorry are;

The chemical energy to mechanical energy conversion efficiency of the old lorry = 20%

The amount of chemical energy used by the engine = 600 joules

Let 'M.E.' represent the amount of mechanical energy produced by the old lorry, we have;

[tex]Energy \ Efficiency = \dfrac{Energy \ produced }{Total \ Energy \ Taken \ In \ or \ Used} \times 100[/tex]

Therefore, the for the old lorry, we have;

[tex]20\% = \dfrac{M.E. \ Produced}{600 \ Joules} \times 100[/tex]

∴ M.E. Produced = 20/100 × 600 J = 120 J

The amount of mechanical energy produced by the old lorry when 600 Joules of chemical energy have been used by the engine, M.E. = 120 Joules

the answer is "all organisms evolve at the same rate" :)

Answer:

answer is b

Explanation:

Answer:

4 N

Explanation:

mass = 2 kg

acceleration = 2 m/s^2

Force = mass * acceleration

         = 2 *2

         = 4 N

Answer:

D force mass and distance

Explanation:

The solution is be found in the attachment.

A horizontal net force F is exerted on an object at rest. The object starts at x = 0 m and has a speed of 4.0 m/s after moving 8.0 m along a horizontal frictionless surface. The net force F as a function of the object's position x is shown below.

What is the mass of the object?

Answer: 30 kg

Answer:

The final equilibrium temperature of the tin-water mixture is approximately 18.468 °C

Explanation:

The parameters of heat energy transfer from the tin to the water are given as follows;

The mass of the sample of tin, m₁ = 0.225 kg

The initial temperature of the tin, T₁ = 97.5 °C

The mass of the water into which the tin is dropped, m₂ = 0.115 kg

The initial temperature of the water, T₂ = 10.0 °C

The specific heat capacity of tin, c₁ = 230 J/(kg·°C)

The specific heat capacity of water, c₂ = 4,200 J/(kg·°C)

Let 'T' represent the final equilibrium temperature of the tin-water mixture, we have;

The heat lost by the tin, ΔQ[tex]_{tin}[/tex] = The heat gained by the water ΔQ[tex]_{water}[/tex]

∴  ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex]

Where;

ΔQ[tex]_{tin}[/tex] = m₁·c₁·(T₁ - T)

ΔQ[tex]_{water}[/tex] = m₂·c₂·(T - T₂)

By substitution, we have;

ΔQ[tex]_{tin}[/tex] = 0.225 kg × 230 J/(kg·°C) × (97.5°C - T)

ΔQ[tex]_{water}[/tex] = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

From ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex], we have;

0.225 kg × 230 J/(kg·°C) × (97.5°C - T) = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

∴ 5,045.625 J - 51.75 J/°C × T = 483 J/°C × T - 4,830 J

5,045.625 J + 4,830 J = 534.75 J/°C × T

∴ 534.75 J/°C × T = 9,875.625 J

T =  9,875.625 J/(534.75 J/°C) = 18.4677419 °C ≈ 18.468 °C

The final equilibrium temperature of the tin-water mixture, T ≈ 18.468 °C.

Answer:

17.3 miles

Explanation:

Answer:

A gas

Explanation:

Answer:

[tex]V=1.76\times 10^{-4}\ V[/tex]

Explanation:

Given that,

The diameter of a wire, d = 1.628 mm

Radius, r = 0.814  mm = 0.000814m

Current, I = 12.5 mA

The length of the wire, l = 2m

The resistivity of the wire, [tex]\rho=1.47\times 10^{-8}\ \Omega-m[/tex]

We need to find the potential difference across the wire. We know that the resistance of the wire is given by :

[tex]R=\rho\dfrac{l}{A}[/tex]

Also, V = IR

[tex]\dfrac{V}{I}=\rho\dfrac{l}{A}\\\\V=\dfrac{\rho l I}{A}\\\\V=\dfrac{1.47\times 10^{-8}\times 2\times 12.5\times 10^{-3}}{\pi \times (0.000814)^2}\\\\V=1.76\times 10^{-4}\ V[/tex]

So, the potential difference of the wire is [tex]1.76\times 10^{-4}\ V[/tex].

Answer:

wire By please mark my answer in brain list

Answer:

Remove wire G, if the wire after it is F. Remove wire A as C is connecting to it already.

Answer:

the 750 j will have potential energy is 375

Explanation:

750/2 is 375

Answer:

Image result for Why does the Moon appear red during a lunar eclipse?

A lunar eclipse takes place when the sun, Earth and moon line up in space. The moon passes through Earth's shadow. ... Bottom line: The moon can look red during a total lunar eclipse because of sunlight that's filtered and refracted by Earth's atmosphere

Answer:

1 AND 3

Explanation:

Answer:

P = 928.09 Pa

Explanation:

Given that,

Mass of a gas cylinder, m = 90 kg

The diameter of the cylinder, d = 1.1 m

Radius, r = 0.55 m

We need to find the ground pressure. The pressure is equal to force per unit area. So,

[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]

So, the ground pressure is 928.09 Pa.