Answer:
72.96 of water produce by 45.4 L of oxygen at STP.
Explanation:
[tex]H_2+\frac{1}{2}O_2\rightarrow H_2O[/tex]
1 mole of oxygen=22.4 L at STP
[tex]\frac{1}{2}[/tex]\mole of oxygen=22.4/2=11.2 L
11.2 L of oxygen required to produce water=1 mole
1 L of oxygen required to produce water=1/11.2 mole
45.4 L of oxygen required to produce water=[tex]\frac{1}{11.2}\times 45.4[/tex]
45.4 L of oxygen required to produce water=[tex]\frac{45.4}{11.2}[/tex]moles
1 mole of water=18 g
[tex]\frac{45.4}{11.2}[/tex]moles of water=[tex]18\times \frac{45.4}{11.2}[/tex]
[tex]\frac{45.4}{11.2}[/tex]moles of water=72.96 g
Hence, 72.96 of water produce by 45.4 L of oxygen at STP.
What should be done if a spectrophotometer reports an absorbance that is too high? Select one: Reposition the cuvette in the spectrophotometer. Pour out half the volume of the sample. Restart the spectrophotometer and try again. Dilute the sample. g
Answer:
The sample should be diluted
Explanation:
According to Beer Lambert's law, the absorbance of a sample depends on the concentration of the sample.
Hence, if the concentration of the sample is very high, the spectrophotometer will also report a very high value of absorbance.
When this is the case, the sample should simply be diluted and the readings are taken again using the spectrophotometer.
Draw bond-line formulas of all monochloro derivatives that might be formed when 1,1-dimethylcyclobutane is allowed to react with Cl2 under UV irradiation. For each structure, indicate, with an asterisk, any stereocenters that might be present.
Answer:
Attached below
Explanation:
Diagram of Bond-line formulas of all monochloro derivatives formed when 1,1-dimethylcyclobutane is allowed to react with c12 under UV
attached below
1. Which of the combinations in the lab activity had indications that a chemical change occured? Defend your argument with evidence.
2. Which of the combinations in the lab activity had indications that a physical change occured? Defend your argument with evidence.
3. Are all physical changes reversible? Explain your answer using an example you've observed in your everyday life.
4. Give an example of something you've observed in your everyday life that is a chemical reaction. How did you know it was a chemical reaction?
Answer:The green growing on the penny of copper and the rust forming on the nail of iron are chemical changes. Boiling away salt water, scraping iron filings from a mixture of sand with a magnet, and breaking a rock with a hammer, are physical changes.
Explanation:
Ammonia is produced by the reaction of nitrogen and hydrogen: N2(g) + H2(g) NH3(g)
(a) Balance the chemical equation.
(b) Calculate the mass of ammonia produced when 35.0g of nitrogen reacts with hydrogen.
Answer:
a) N2 (g) + H2 = 2 NH3
b) You have to state the mass of hydrogen
Inbox
Question 1
Flagged
III
Initial Knowledge Check
Drafts
Sent
Write the symbol for every chemical element that has atomic number less than 14 and atomic mass greater than 23.2 u.
Answer:
8 oxygen. 9 flourine. 10. Neon. 5 Boron
g Elimination reaction simulation, Kim had tried to prepare cyclohexene from cyclohexanol using HCl as a catalyst, but he got a weird side product cyclohexyl chloride. Cyclohexyl chloride is formed possibly from the side reaction called A. SN1 substitution reaction B. E2 reaction C. E1 reaction D. SN2 substitution reaction
Answer:
SN1 substitution reaction
Explanation:
cyclohexanol is a secondary alkanol. The mechanism of acid catalysed dehydration of cyclohexanol involves the protonation of the -OH group.
This is followed by loss of water which is a good leaving group. At this stage, a proton could be abstracted to yield cyclohexene by E1 mechanism or an SN1 substitution reaction may occur to yield Cyclohexyl chloride.
The both reactions are equally likely.
1.Using the absorbance of the spinach extract and the equation of the trendline, determine the concentration of the extract solution. Report the concentration in moles/L (M).
2. Calculate the number of rams of chlorophyll-a in the 25ml, spinach solution.
3. Calculate the concentration of the chloropyhll-a soultion in spinach (mg chlorophyll-a/g spinach)
Trendline: y=1609x + .0055
Absorbance spinach extract lamda max: .329
Absorbacne spinach extract, 750 nm: .023
Corrected absorbance: .306
Mass of Spinach: .1876g Total Volume of spinach: 25mL
Answer:
Explanation:
From the given information:
We are to make use of the spinach absorbance extract which is the corrected absorbance (y) = 0.306
And also the trendline equation:
y = 1609x + 0.0055
where,
x = absorbance of the spinach extract.
∴
0.306 = 1609x + 0.0055
collecting the like terms
0.306 - 0.0055 = 1609x
0.3005 = 1609x
x = 0.3005/1609
x = 1.8676 × 10⁻⁴
x ≅ 0.0002 M
No. of grams for the chlorophyll can be computed as follows:
recall that:
molar mass of chlorophyll = 893.5 g/mol
the volume = 25ml = (25/1000) L = 0.025 L
∴
In spinach solution, the no. of grams for the chlorophyll:
= (0.0002) mol/L × (893.5 g/mol) × (0.025) L
= 0.0044675 g
≅ 0.0045 g
In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach
= 4.5 mg/0.1876 g
= 23.987 mg/g
≅ 24 mg/g
From the given information:
We are to make use of the spinach absorbance extract which is the corrected absorbance (y) = 0.306ChlorophyllChlorophyll is any member of the class of the green pigments involved in the photosynthesis process.
And also the trendline equation:
y = 1609x + 0.0055
where,
x = absorbance of the spinach extract.
so 0.306 = 1609x + 0.0055
collecting the like terms
0.306 - 0.0055 = 1609x
0.3005 = 1609x
x = 0.3005/1609
x = 1.8676 × 10⁻⁴
x ≅ 0.0002 M
2. No.of grams for the chlorophyll can be computed as follows:
recall that:
molar mass of chlorophyll = 893.5 g/mol
The volume = 25ml = (25/1000) L = 0.025 L
Therefore:
In spinach solution, the no. of grams for the chlorophyll:
= (0.0002) mol/L × (893.5 g/mol) × (0.025) L
= 0.0044675 g
≅ 0.0045 g
3. In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach
= 4.5 mg/0.1876 g
= 23.987 mg/g
≅ 24 mg/g
Read more about chlorophyll here:
https://brainly.com/question/3529377
Typhoon signals rise due to what? wind speed or wind strength or both?
show in chemistry the fermentation of carbohydrate to form alcohol
hope it helps to everyone
jawbone root nerve cementum blood vessel gum crown Fill in the blanks. 1. The front four teeth on each jaw are called 2. Each tooth is attached to the jawbone with the help of 3. A healthy tooth is held firmly in the jawbone by the 4. Teeth can get spoilt if they are not kept 5. Germs in the mouth feed on sugar and make
Answer:
shduxhheufufffhduduf
In the titration of 82.0 mL of 0.400 M HCOOH with 0.150 M LiOH, how many mL of LiOH are required to reach the equivalence point
Answer:
218.7 mL
Explanation:
The reaction that takes place is:
HCOOH + LiOH → LiCOOH + H₂OFirst we calculate how many HCOOH moles reacted, using the given volume and concentration:
82.0 mL * 0.400 M = 32.8 mmol HCOOHAs 1 HCOOH mol reacts with 1 LiOH mol, 32.8 mmoles of LiOH are needed to react with 32.8 mmoles of HCOOH.
Finally we calculate how many mL of a 0.150 M solution would contain 32.8 mmoles:
32.8 mmol / 0.150 M = 218.7 mLCalculate the mass of Na2S needed if a solution containing 2g of Hg(NO3)2 was added to Na2S solution.
( Hg= 200.59, N= 14, O= 16, Na= 23, S=32)
Answer:
1.433g of HgS are produced
Explanation:
A Solution Containing 2.0 Grams Of Hg(NO3)2 Was Added To A Solution Containing 2.0 Grams Of Na2S. Calculate the mass of the HgS that was formed (it is a precipitate) according to this reaction:
Based on the reaction:
Na2S + Hg(NO3)2 → HgS + 2NaNO3
To solve this question we need to find the moles of each reactant in order to find the limiting reactant. The moles of limiting reactant = moles of HgS:
Moles Na2S -Molar mass: 78.0452 g/mol-
2.0g * (1mol / 78.0452g) = 0.0256 moles Na2S
Moles Hg(NO3)2 -324.7g/mol-
2.0g * (1mol / 324.7g) = 0.006159 moles Hg(NO3)2
As the reaction is 1:1, and moles of Hg(NO3)2 < moles Na2S
The moles of Hg(NO3)2 = Moles HgS = 0.006159 moles
The mass is:
Mass HgS -Molar mass: 232.66g/mol-:
0.006159 moles * (232.66g/mol) =
1.433g of HgS are produced
43.0 mL of 1.49 M perchloric acid is added to 14.0 mL of calcium hydroxide, and the resulting solution is found to be acidic.
29.1 mL of 0.498 M barium hydroxide is required to reach neutrality.
What is the molarity of the original calcium hydroxide solution?
Answer:
2.29 M
Explanation:
Equation of the reaction;
Ca(OH)2(aq) + 2HClO4(aq) → 2H2O(l) + Ca(ClO4)2(aq)
Concentration of acid CA = 1.49 M
Concentration of base CB= ????
Volume of acid VA= 43.0 ml
Volume of base VB= 14.0 ml
Number of moles of acid NA = 2 moles
Number of moles of base NB = 1 mole
CAVA/CBVB = NA/NB
CAVANB =CBVBNA
CB= CAVANB/VBNA
CB= 1.49 × 43.0 × 1/14.0 × 2
CB= 2.29 M
A hypnotist's watch hanging from a chain swings back and forth every 0.98 s. What is the frequency (in Hz) of its oscillation?
Answer:
1.02 Hz
Explanation:
frequency= (1/t) = (1/0.98) = 1.02 hz
Give the following reaction: ammonium nitrate—> dinitrogen monoxide + water.
a.) Write a complete balanced chemical equation.
b.) Calculate the number of molecules of water produced by 11.2g of ammonium nitrate
Answer:
a) NH₄NO₃ ⇒ N₂O + 2 H₂O
b) 1.69 × 10²³ molecules
Explanation:
Step 1: Write the balanced equation
NH₄NO₃ ⇒ N₂O + 2 H₂O
Step 2: Convert 11.2 g of NH₄NO₃ to moles
The molar mass of NH₄NO₃ is 80.04 g/mol.
11.2 g × 1 mol/80.04 g = 0.140 mol
Step 3: Calculate the moles of H₂O produced
0.140 mol NH₄NO₃ × 2 mol H₂O/1 mol NH₄NO₃ = 0.280 mol H₂O
Step 4: Calculate the number of molecules in 0.280 moles of water
We will use Avogadro's number.
0.280 mol × 6.02 × 10²³ molecules/1 mol = 1.69 × 10²³ molecules
g A sample of chlorine gas starting at 681 mm Hg is placed under a pressure of 991 mm Hg and reduced to a volume of 513.7 mL. What was the initial volume, in mL, of the chlorine gas container if the process was performed at constant temperature?
Answer:
747.5 mL
Explanation:
Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:
P₁V₁ = P₂V₂Where in this case:
P₁ = 681 mm HgV₁ = ?P₂ = 991 mm HgV₂ = 513.7 mLWe input the data given by the problem:
681 mm Hg * V₁ = 991 mm Hg * 513.7 mLAnd solve for V₁:
V₁ = 747.5 mLdefine a fluid very sort answer
Answer:
A fluid is a medium that has a defined mass and volume, but no fixed shape, at a constant temperature and pressure. This may include gases, liquids, plasmas, and to some extent plastic solids. A fluid can flow and deform, preventing it from carrying loads in a static equilibrium. A fluid is always compressible and internal frictional forces always occur due to the viscosity of the fluid.
Many home barbeques are fueled with propane gas (C3H8)(C3H8). Part A What mass of carbon dioxide is produced upon the complete combustion of 27.9 LL of propane (the approximate contents of one 5-gallon tank)
Answer:
41264 g of CO₂
Explanation:
Combustion reaction is:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
1 mol of propane react to 5 moles of oxygen in order to proudce 3 moles of carbon dioxide and 4 moles of water.
In a combustion reaction, our reactant reacts to oxygen and the products are always CO₂ and water.
We have the volume of propane but we need moles of it, so we need to apply density.
Density = mass / volume so mass = density . volume.
Density of propane is: 493 g/L
Mass of propane is 493 g/L . 27.9L = 13754.7 g
We convert mass to moles: 13754.7 g . 1 mol/ 44g = 312.6 moles
According to reaction, 1 mol of propane can produce 3 moles of CO₂
Our 312.6 moles will produce 312.6 . 3 = 937.8 moles
We convert moles to mass: 937.8 mol . 44 g/mol = 41264 g
calculate the molarity in a 0.550 m solution of NaCl in water. Assume that the solution density is 1.03g/mol
Answer:
M=0.549M
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to perform this calculation by firstly assuming we have 1 kg of water as the solvent so that we have 0.550 moles of NaCl as well. Moreover, we realize we have 1000 grams of water and the correct mass of the solution can be calculated by converting 0.550 moles of NaCl to grams by using its molar mass:
[tex]m_{solute}=0.550mol*\frac{58.44 g}{1mol}= 32.14g\\\\m_{solution}=1000g+32.14g=1032.14g[/tex]
And subsequently, the volume in liters by using the density and the correct conversion factor:
[tex]V_{solution}=1032.14g*\frac{1mL}{1.03g} *\frac{1L}{1000mL} =1.002L[/tex]
Finally, the molarity will be:
[tex]M=\frac{0.550mol}{1.002L} =0.549M[/tex]
Regards!
Why ethanol is used in pectin extraction
Explanation:
is responsible for interrupting the interaction between pectins and solvent molecules
What happens when Sulphur dioxide (so2) gas is passed through an acidified solution of hydrogen . sulfide (H₂S) gas :
Answer:
When SO
2
is passed through an acidified solution of H
2
S, sulphur is precipitated out according to the reaction.
2H
2
S+SO
2
→2H
2
O+3S
I have an unknown volume of gas at a pressure of 0.50 atm and a temperature of 325 K. If I raise the pressure to 1.2 atm, decrease the temperature to 320 K, and measure the final volume to be 48 liters, what was the initial volume of the gas?
SHOW YOUR WORK
Answer:
the answer is 2.1 atm
Explanation:
the way people normally do it is by simply deciding the 325k with the 1.2
8.7 Two products are formed in the following reaction in a 50:50 mixture. Would the resulting solution be optically active
Answer:
Yes. The solution would be optically active.
Explanation:
Diastereomer are defined as the image that is non mirror and non -identical. It is made up of two stereoisomers. They are formed when the two stereoisomers or more than two stereoisomers of the compound have the same configuration at the equivalent stereocenters.
In the given context, as the product given is a diastereomeric mixture, the product would have an optical activity in total.
So the answer is Yes.
a. Draw 2,3-dichloro octane.
b. Write the lewis structure for H20 molecule.
Answer:
a.draw 2,3 dicholoro octane
Explanation:
mag isip ka kung paano hehe
Organic foods do not contain chemicals.
True
Or
False
Answer:
True
Explanation:
The word Organic refers to the methods used to cultivate and process farm agricultural products. Organic foods are edible and nutritious substances consumed (both plants and animals) that are free from the use of synthetics and chemicals. In plants, the include the use of organic manure that serves as fertilizers and carrying out the weeding process by hand weeding. In animals, diseases can be prevented by maintaining a clean house or rotational grazing.
The benefit of organic foods are to produce food substances with no chemical substances.
define saturated and unsaturated fats
Answer:
unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.
Which equation expresses the solubility product of Zn3(PO4)2?
a. Ksp = [Zn2+][PO43]
b. Ksp = [Zn2+]3 [PO43]2
c. Ksp = 6[Zn2+][PO43]2
d. Ksp = 108[Zn2+][PO43]2
⇒b. Ksp = [Zn2+]3 [PO43]2
Hope It Helps You ✌️
When a photon of red light hits metal X, an electron is ejected. Will an electron be ejected if a photon of yellow light hits metal X?
A. Yes
B. No
C. Can't tell
Why the catalytic and optical properties of nanomaterial are different from bulk material
Answer:
The material properties of nanostructures are different from the bulk due to the high surface area over volume ratio and possible appearance of quantum effects at the nanoscale. ... Yu; they found that the structural distortions on the quantum dots depend both on the kind of dopant and on the size of the dots.
Explanation:
hope it helps
D
Question 2
1 pts
How many moles of carbon tetrachloride are present in
18.Og of CC14?
i think .117018
now to get to the 20charaeactrs minimum.
