Identify each of the following statements as describing a chlorination reaction or a bromination reaction. Only ONE can be used for each.
A. Propagation step requires more engery.
B. enthalphy of the reaction is endothermic
C. halogenation yields more than one major product
D. carbon-halogen bond dissociation energy is higher
E. the enthalpy of the reaction is exothermic
F. the halogenation is selective

The free moving charged particles in a Carbon electrode made of electrode are electrons.

An electrode is a substance that conducts electricity, which means it allows electric charges to travel through it. During electrolysis, an electrode is used to provide an electric current for the reduction and oxidation reactions that take place.

A carbon electrode is a type of electrode that is made of carbon. Carbon electrodes are commonly used in batteries and fuel cells because they are lightweight and can easily conduct electricity.

Electrons are free moving charged particles in a carbon electrode made of electrode. Electrons are negatively charged subatomic particles that orbit the nucleus of an atom. They are found in the outer shells of atoms and can move freely from one atom to another when they are excited by an electric current.

When an electric current is passed through a carbon electrode, the electrons in the outer shells of the carbon atoms are excited and become free moving charged particles. This allows the carbon electrode to conduct electricity and to participate in reduction and oxidation reactions during electrolysis.

For more such questions on electrode, click on:

https://brainly.com/question/28302450

#SPJ11

The balanced chemical formula for the given scenario is 2{\rm NO}_2(g)\ +\ O_2(g)\ +\ 2H_2O(l)\ \rightarrow\ 2H{\rm NO}_3(aq)

To write the chemical formula for the given scenario, it is necessary to balance the chemical reaction equation by following the law of conservation of mass.

Nitric acid is a component of acid rain. Acid rain is caused by air pollution, and it occurs when the nitrogen dioxide pollutant \left({\rm NO}_2\right) reacts with gaseous oxygen  \left(O_2\right) and liquid water  \left(H_2O\right) to form aqueous nitric acid (HNO3).The balanced chemical equation for this reaction is:

2{\rm NO}_2(g)\ +\ O_2(g)\ +\ 2H_2O(l)\ \rightarrow\ 2H{\rm NO}_3(aq)

The balanced equation states that two molecules of nitrogen dioxide gas react with one molecule of oxygen gas and two molecules of liquid water to produce two molecules of aqueous nitric acid. The coefficients ensure that the equation is balanced according to the law of conservation of mass.

Learn more about Chemical formula:

https://brainly.com/question/26694427

#SPJ11

Adding the acid to water is the proper way to dilute chemicals. Begin by measuring the correct volume of acid in a graduated cylinder. Next, pour the acid into a beaker containing the correct volume of water. Finally, stir the solution until it is fully mixed.

Acids are strong chemical compounds. When working with acids, it is important to dilute them in the correct manner to prevent harm to oneself or the surrounding environment.

The correct method of dilution for acids is to add the acid to water, not the other way around. This is because adding water to acid can cause an exothermic reaction that releases heat and may cause the acid to splash and burn you.

When diluting acids, be sure to add the acid to water slowly and stir continuously to prevent splashing and heat generation. Therefore, the correct answer is to add the acid to water.

Learn more about Acids here:

https://brainly.com/question/29796621

#SPJ11

Hexane, C6H14, is a non-polar molecule, meaning that its electric charge is evenly distributed. On the other hand, water (H2O) is a polar molecule, with an uneven distribution of electric charge. Since the two molecules have opposite polarities, they do not interact with one another, leading to the nearly insoluble nature of hexane in water.

When explaining, in terms of the molecular polarity, why hexane is nearly insoluble in water, it's crucial to consider the nature of the molecules, their polarity, and their ability to interact with one another.

Hexane, with the chemical formula C6H14, is a saturated hydrocarbon with a boiling point of 69°C. It's an odorless liquid that's colorless, and it's frequently utilized as a solvent in the laboratory. When hexane molecules are considered, they are all nonpolar molecules, meaning that the electrons are distributed uniformly among the atoms, and there is no permanent charge on any part of the molecule.

Water (H2O) is a polar molecule with a partial positive charge on its hydrogen atoms and a partial negative charge on its oxygen atoms. It's a very common solvent in laboratories because it's extremely polar and can dissolve a wide range of substances. It's because of the difference in the polarity of water and hexane molecules that hexane is nearly insoluble in water.

The reason hexane is insoluble in water is that water is an incredibly polar substance, while hexane is a nonpolar substance. The polar water molecules are attracted to other polar substances and repelled by nonpolar substances like hexane, which has no charge to attract polar water molecules.

Therefore, as a result, hexane does not dissolve in water and is nearly insoluble.

To know more about hexane click here:

https://brainly.com/question/30908383

#SPJ11

The best examples of foods within the protein group that can also increase intake of unsaturated fats are salmon, nuts, seeds, legumes. The correct option is (c).

Protein is a vital macro nutrient that is required to build and repair tissues, produce enzymes and hormones, and maintain healthy muscles and bones. Unhealthy fats can increase the risk of heart disease, stroke, and other chronic health problems. A diet that contains a good balance of carbohydrates, protein, and healthy fats is recommended for overall health and well-being. Unsaturated fats are a type of healthy fat that can improve heart health by reducing bad cholesterol levels and increasing good cholesterol levels.

Foods that are high in protein and unsaturated fats are ideal for promoting overall health and wellness. Salmon is a good source of protein and contains omega-3 fatty acids, which are a type of unsaturated fat that can reduce inflammation and improve brain function. Nuts and seeds are high in protein and also contain healthy fats that can help reduce the risk of heart disease and other chronic health problems. Legumes, such as lentils, beans, and chickpeas, are high in protein and fiber and also contain healthy fats that can help improve heart health.In conclusion, salmon, nuts, seeds, and legumes are the best examples of foods within the protein group that can also increase intake of unsaturated fats.

Therefore, Salmon, nuts, seeds, and legumes are the best examples of protein-rich meals that can also enhance unsaturated fat intake. The right option is (c).

Learn more about unsaturated fats on:

https://brainly.com/question/24186437

#SPJ11

A liquid-gas system at equilibrium is disturbed by adding or removing vapor from the system (at constant temperature). The correct statements for the vapor pressure regarding this situation are A, B, and D.

A. Adding vapor will cause a temporary increase in vapor pressure: When the vapor is added to the system, the total vapor pressure increases, and the vapor pressure in the system is greater than the original equilibrium vapor pressure until the system re-equilibrates.

B. Adding or removing vapor will result in a new equilibrium vapor pressure: The equilibrium vapor pressure will be affected by the addition or removal of vapor. When the vapor is added or removed, the system must reach a new equilibrium between the vapor and liquid phases before the vapor pressure returns to the original equilibrium value.

D. Removing vapor will cause a temporary increase in the rate of condensation: When the vapor is removed from the system, the total vapor pressure decreases, and the rate of condensation of the liquid phase will increase until the system re-equilibrates.

Statement C. when equilibrium is re-established after a disturbance in a liquid-gas system, the vapor pressure will be the same: is incorrect. When a system is disturbed by adding or removing vapor, the new equilibrium vapor pressure is different from the original equilibrium vapor pressure.

Therefore, the correct statements for the vapor pressure of the system are A, B, and D.

To know more about the vapor pressure, refer here:

https://brainly.com/question/11864750#

#SPJ11

The best material for insulation in this case would be Styrofoam. Styrofoam is lightweight, strong, and an excellent thermal insulator. It is composed of tiny bubbles of air that are suspended in a matrix of plastic. The air trapped inside the bubbles acts as a thermal barrier, keeping heat out or in, depending on the application.

Its lightweight nature makes it easier to manipulate, while its strength gives it the durability needed to keep a drink hot or cold. Its insulation properties also make it the perfect material for the student's insulated drink cup.

Styrofoam can be cut and shaped easily, making it a great material for use in drink cups. The material is also easy to clean and resistant to water and other liquids, which makes it ideal for frequent use. Additionally, Styrofoam is both affordable and widely available, making it an ideal choice for the student's project.

Know more about thermal insulator here:

https://brainly.com/question/23134662

#SPJ11

The best thing to do with unused chemicals is to dispose of them as instructed on the safety sheet. This may involve returning the chemicals to their original containers or throwing them away with the regular trash. Never dump unused chemicals down the sink, as this could be hazardous to the environment and to your health.
Unused chemicals should be disposed of as instructed on the safety sheet. It is important to dispose of chemicals in a safe and responsible manner to avoid harm to the environment and human health.

What are chemicals?

Chemicals are substances that are made up of molecules, which are made up of atoms. Chemicals can be found in nature or synthesized by humans. Chemicals have a wide range of uses, from pharmaceuticals to household cleaning products.

Why should you dispose of unused chemicals as instructed on the safety sheet?

Unused chemicals can pose a hazard if they are not disposed of correctly. Many chemicals are hazardous and can be dangerous to human health and the environment if they are not disposed of properly. Chemicals that are poured down the drain or thrown in the trash can contaminate the environment and cause harm to animals and humans. Examples of hazardous chemicals are corrosive, flammable, reactive, and toxic. It is essential to follow the safety sheet's instructions on how to dispose of unused chemicals to protect the environment and human health. In addition, it is important to ensure that unused chemicals are not mixed with other chemicals, as this can cause a dangerous reaction.

For more information follow this link: https://brainly.com/question/30970962

#SPJ11

The main difference between a saturated solution and a supersaturated solution is concentration of the solute.

A saturated solution contains the maximum amount of solute that can be dissolved under the given conditions, while a supersaturated solution contains more solute than is normally possible. A saturated solution contains the maximum amount of solute that can be dissolved in a given solvent at a specific temperature and pressure. In a saturated solution, the concentration of solute is in equilibrium with the concentration of undissolved solute, which is in dynamic equilibrium with the dissolved solute. A supersaturated solution, on the other hand, is a solution that contains more solute than is normally possible to dissolve in the solvent under the given conditions.

To know more about  supersaturated solution, here

brainly.com/question/16817894

#SPJ4

Highest boiling point compound is CBr4. The compound which has lowest freezing point is F2. The compound which has lowest vapor pressure is CH3CH2OH. The compound which has greatest viscosity is H2O2.

The boiling point of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. The compound with the highest boiling point in this group is CBr4 because of its stronger London dispersion forces.
The freezing point of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. A covalent compound has weak van der Waal forces between its particles, and the smaller the particle, the weaker the van der Waal force. F2 has the smallest particle size and therefore the lowest freezing point.c. lowest vapor pressure at 25°C: CH3CH2OH
The vapor pressure of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. The compound with the lowest vapor pressure at 25°C. is CH3CH2OH.

The compound with greatest viscosity: H2O2. Viscosity is a measure of a liquid's resistance to flow. The greater the viscosity, the greater the resistance to flow.
Enthalpy of vaporization is the amount of energy required to vaporize a unit quantity of a substance. The enthalpy of vaporization is related to the strength of the intermolecular forces between the particles of the substance. The compound with smallest enthalpy of fusion is I2.
The enthalpy of fusion is the amount of energy required to melt a unit quantity of a substance. I2 has the weakest intermolecular forces and therefore the smallest enthalpy of fusion.

Learn more about Compounds here:

https://brainly.com/question/81085

#SPJ11

For the molecular formula of aspartame, the artificial sweetener marketed as NutraSweet, is [tex]C_{14}H_{18}N_2O_5[/tex],

a. the molar mass of aspartame is 294.30 g/mol.

b. there are 3.40 x [tex]10^{-6}[/tex] moles of aspartame in 1.00 mg of aspartame.

c. there are 2.05 x [tex]10^{18}[/tex] molecules of aspartame in 1.00 mg of aspartame.

d. the total number of hydrogen atoms in 1.00 mg of aspartame is 34 hydrogen atoms.

a. The molar mass of aspartame can be calculated by adding up the atomic masses of all its atoms:

Molar mass of aspartame = (14 x 12.01 g/mol) + (18 x 1.01 g/mol) + (2 x 14.01 g/mol) + (5 x 16.00 g/mol) = 294.30 g/mol

Therefore, the molar mass of aspartame is 294.30 g/mol.

b. The number of moles of aspartame present in 1.00 mg of aspartame can be calculated using the formula:

moles = mass/molar mass

moles = 1.00 mg / 294.30 g/mol = 3.40 x 10^-6 mol

Therefore, there are 3.40 x 10^-6 moles of aspartame in 1.00 mg of aspartame.

c. The number of molecules of aspartame present in 1.00 mg of aspartame can be calculated using Avogadro's number:

number of molecules = moles x Avogadro's number

number of molecules = 3.40 x [tex]10^{-6}[/tex] mol x 6.02 x [tex]10^{23}[/tex] molecules/mol = 2.05 x [tex]10^{18}[/tex] molecules

Therefore, there are 2.05 x 10^18 molecules of aspartame in 1.00 mg of aspartame.

d. The number of hydrogen atoms present in 1.00 mg of aspartame can be calculated as follows:

There are 14 carbon atoms in 1.00 mg of aspartame, and each carbon atom is bonded to two hydrogen atoms. Therefore, there are 28 hydrogen atoms bonded to carbon atoms.

There are 2 nitrogen atoms in 1.00 mg of aspartame, and each nitrogen atom is bonded to three hydrogen atoms. Therefore, there are 6 hydrogen atoms bonded to nitrogen atoms.

There are 5 oxygen atoms in 1.00 mg of aspartame, and each oxygen atom is not bonded to any hydrogen atoms.

Therefore, the total number of hydrogen atoms in 1.00 mg of aspartame is 28 + 6 + 0 = 34 hydrogen atoms.

Learn more about the molecular formula of aspartame at

https://brainly.com/question/26876807

#SPJ4

Le Chatelier's principle predicts that when a stress or change is added to a system at equilibrium, the system will adjust in order to counteract the stress or change. The principle can be used to describe the shift in the direction of the chemical equilibrium in response to changes in pressure, temperature, or concentration.

Le Chatelier's principle states that when the temperature is increased, the equilibrium system will absorb the heat by shifting the equilibrium position in the direction that uses up the heat energy. If heat is a product of the reaction, the equilibrium will shift to the left. If heat is a reactant, the equilibrium will shift to the right.

Here, in the case of the reaction of nitrogen and hydrogen to create ammonia:

N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ∆H = −92 kJ/mol

The reaction produces heat, therefore the reaction is exothermic. An increase in temperature will cause a shift in equilibrium to the left, as the reaction will try to use up the excess heat. This means that the reaction will reduce the amount of NH₃ in the system, leading to a decrease in the concentration of NH₃.

Learn more about Le Chatelier's Principle here:

https://brainly.com/question/29009512

#SPJ11

The observation which corresponds to physical change are a liquid freezes into a solid and a solid dissolves into water.

The observation which corresponds to chemical change are a solution heats up upon mixing with another, the color of a substance changes over time, bubbles are produced upon mixing two solutions, and a precipitate is formed from two solutions.

When it comes to determining whether each observation corresponds to a physical change or a chemical change:

1. A liquid freezes into a solid corresponds to a physical change.

The explanation for this is that physical changes occur when the form of the substance alters, but the chemical composition of the substance stays the same. Because the liquid's chemical composition does not alter during the process of freezing, it is classified as a physical alteration.

2. A solution heats up upon mixing with another corresponds to a chemical change.

A chemical change is one in which the composition of the substance changes. This is most commonly accomplished through a chemical reaction, which is when the original molecules are transformed into new molecules. In this instance, when two solutions are combined and heat is generated, a chemical reaction is occurring.

3. A solid dissolves into water corresponds to a physical change.

The explanation for this is that the process of dissolving a solid into water does not alter the chemical composition of the solid. Instead, the solid's particles are separated by the water particles, resulting in a homogenous solution. Because the chemical composition remains constant, it is classified as a physical change.

4. The color of a substance changes over time corresponds to a chemical change.

This alteration is often linked to a chemical reaction. When a substance's color changes over time, it is frequently due to the presence of a different substance. As a result, the chemical composition of the original substance is altered. As a result, it is classified as a chemical alteration.

5. Bubbles are produced upon mixing two solutions corresponds to a chemical change.

This alteration is often linked to a chemical reaction. When two substances combine and produce bubbles, it is usually the result of the generation of a new gas. As a result, the original molecules have transformed, resulting in a new substance. As a result, it is classified as a chemical alteration.

6. A precipitate is formed from two solutions corresponds to a chemical change.

When two solutions are combined, they frequently react to form a precipitate. This indicates that a new substance has been produced, and the original substance's composition has been altered. As a result, it is classified as a chemical alteration.

Learn more about Chemical change:

https://brainly.com/question/11370755

#SPJ11

In the process of lactic acid fermentation, the enzyme lactate dehydrogenase catalyses the conversion of pyruvate to lactate or lactic acid by the addition of hydrogen ions.

The pyruvate that results from glycolysis is transformed into lactic acid during lactic acid fermentation. The synthesis of lactate and NAD+ as a result of the transfer of two highly energetic electrons from NADH to pyruvate is what allows for this conversion. This procedure aids in the renewal of NAD+, which is necessary for glycolysis to carry on making ATP without oxygen. In many organisms, including bacteria, fungi, and animals, lactic acid fermentation is an important process. It is crucial in muscles during vigorous exercise when oxygen supply is constrained.

learn more about lactic acid here:

https://brainly.com/question/10948414

#SPJ4

The correct option is dissolving ammonium nitrate in water to cool the water.

Among the given options, the example of an exothermic reaction is dissolving ammonium nitrate in water to cool the water.

Exothermic reactions are chemical reactions that release heat energy into the surroundings. As a result, the products have less energy than the reactants. Dissolving ammonium nitrate in water to cool the water is a good example of an exothermic reaction because it releases heat energy and cools down the surrounding water.

When ammonium nitrate dissolves in water, it releases heat, causing the temperature of the water to decrease. The reaction is exothermic because it releases heat to the surroundings. Dissolving sugar in water and melting ice are examples of endothermic reactions because they absorb heat energy from the surroundings.

Therefore, the correct answer is the option of dissolving ammonium nitrate in water to cool the water.

To learn more about exothermic reactions refer - https://brainly.com/question/10373907

#SPJ11

Buffers are made from weak conjugate acid-base pairs. In part 1 of this experiment, a solution of weak acid is mixed with another solution of weak acid to which the strong base NaOH has been added.

What is a buffer?

A buffer is a solution that can resist changes in pH when acid or base is added. They are used to keep the pH of solutions stable in various chemical and biological systems, including industrial processes, drugs, and the human body. A buffer is a mixture of a weak acid and its conjugate base or a weak base and its conjugate acid.The following are the features of a buffer:It is a solution that resists changes in pH.It consists of a weak acid and its corresponding base.The buffering effect is maximized when the ratio of weak acid to its corresponding base is 1:1.A buffer resists pH changes in either direction, and it has a maximum buffering capacity when pH is within one unit of its pKa. The buffering capacity of the solution is increased by increasing the buffer concentration.

A weak acid is one that only partially dissociates in water to produce hydrogen ions (H+) and anions. Its conjugate base is the species that results from the removal of a proton from the acid. As an example, ammonia (NH3) is a weak base, and its conjugate acid is ammonium (NH4+). The reverse reaction produces the acid and base when the acid is added to water.

Learn more about buffer solution on:

https://brainly.com/question/8676275

#SPJ11

Answer:

The valency of an element refers to the number of electrons an atom can gain, lose or share to attain a stable configuration.

Aluminum (Al) is a metal with an atomic number of 13, which means it has 13 electrons in its neutral state. In its outermost shell, aluminum has three valence electrons.

To attain a stable electronic configuration, aluminum can lose these three valence electrons to become a cation with a 3+ charge (Al3+). By losing these electrons, the outermost shell of the aluminum atom becomes completely filled with eight electrons, which is a stable configuration.

Therefore, the valency of aluminum is 3 because it can lose three electrons to form a stable cation with a 3+ charge.

Explanation:

Answer:

The valency of an element refers to the number of electrons an atom can gain, lose or share to attain a stable configuration.

Aluminum (Al) is a metal with an atomic number of 13, which means it has 13 electrons in its neutral state. In its outermost shell, aluminum has three valence electrons.

To attain a stable electronic configuration, aluminum can lose these three valence electrons to become a cation with a 3+ charge (Al3+). By losing these electrons, the outermost shell of the aluminum atom becomes completely filled with eight electrons, which is a stable configuration.

Therefore, the valency of aluminum is 3 because it can lose three electrons to form a stable cation with a 3+ charge.

Explanation:

The statement that best identify the main idea of the article are, A and C

A) Fingerprints are still the most accurate way to identify a person.

C) Biometric features are slightly different in everyone.

The article seems to focus on biometric technology and the different ways it can be used for identification, security, and health purposes.

It explains that fingerprints remain the most accurate way to identify a person, but also discusses the unique features of other biometric identifiers such as facial recognition and blood vessels.

Lastly, the article emphasizes the importance of recognizing that biometric features are unique to each individual.

Learn more about  biometric technology from

https://brainly.com/question/20643575

#SPJ1

The pressure of the gas sample is 825 mm Hg.

In an open manometer, the pressure of the gas sample can be determined by measuring the difference in height of the mercury levels in the two arms of the manometer. The pressure of the gas sample is equal to the difference in height between the two mercury levels, plus the atmospheric pressure.

In this case, the mercury level in the arm connected to the gas is 45 mm Hg higher than in the arm connected to the atmosphere. This means that the pressure of the gas sample is 45 mm Hg higher than the atmospheric pressure.

So, the pressure of the gas sample can be calculated as:

Pressure of gas sample = atmospheric pressure + height difference between the two mercury levels

Pressure of gas sample = 780 mm Hg + 45 mm Hg

Pressure of gas sample = 825 mm Hg

Therefore, the pressure of the gas sample is 825 mm Hg.

Learn more about manometer here : brainly.com/question/13949430

#SPJ1

The names of the given compounds are:

a) Carbon tetrachloride

b) 1-chloro-2-chloromethane (also known as chloroethyl chloride)

c) 1,2-dichloroethane

d) 2-chloro-2-methylbutane

e) 1,4-dichlorobutane

A compound is a substance made up of two or more different elements chemically combined in fixed proportions. The elements in a compound are held together by chemical bonds, which are formed when atoms of different elements share or transfer electrons to achieve a stable electron configuration.

Compounds have unique properties that are different from their constituent elements, such as melting point, boiling point, density, and reactivity. They can be formed through various chemical reactions, such as synthesis, decomposition, combustion, and oxidation. Examples of common compounds include water (H2O), table salt (NaCl), carbon dioxide (CO2), and glucose (C6H12O6).

Learn more about chemical compounds here https://brainly.com/question/29594386

#SPJ1

AgCl is more likely to dissolve in water when ammonia (NH3) is present. This is due to the fact that ammonia and AgCl may combine to create the water-soluble complex ion, Ag(NH3)2+.

At 25°C, the solubility of AgCl in water is 0.0020 g of AgCl per litre of H2OS.

AgCl dissolves in NH3 at a rate of 14.00 g per kilogramme of NH3 when the temperature is 25°C. Due to the production of the soluble stable complex [AgNH32]+, AgCl is more soluble in NH3. Since oxygen is more electronegative than nitrogen, ammonia is less polar than water.

AgCl is well known to be insoluble in water whereas NaCl and KCl are soluble in the pedagogical literature: implementations of Elementary studies of both qualitative and quantitative analysis make this distinction.

To know more about ammonia visit:-

https://brainly.com/question/20524322

#SPJ1

The correct equation to calculate the mass, in grams, of sodium in 1.5 grams of sodium chloride is: C. 1.5 g NaCI X mol NaCI / 58.44 g NaCI X mol Na / mol NaCI X 22.99 g Na / mol Na.

To break it down, this equation is:

1.5 g (grams) of Sodium Chloride (NaCI) multiplied by the molar mass of Sodium Chloride (mol NaCI) divided by 58.44 g (grams) of Sodium Chloride multiplied by the moles of Sodium (mol Na) divided by the moles of Sodium Chloride (mol NaCI) multiplied by the molar mass of Sodium (22.99 g Na) divided by the moles of Sodium (mol Na).

In other words, the equation is:

Mass in gm (Na) = 1.5 g (NaCI) × (mol NaCI/58.44 g (NaCI)) × (mol Na/mol NaCI) × (22.99 g (Na)/mol Na).

For more information equation for mass calculation refer here

https://brainly.com/question/28225218?

#SPJ11

Answer:

A - 9.6 mol.

Explanation:

Took the test.

A calorie is the commonly used unit of chemical energy. it is also the unit of energy used to measure the energy content of food.

Calorie (or kilocalorie) is a unit of measurement used to measure the energy content of food. It is the amount of energy required to raise the temperature of one kilogram of water by one degree Celsius.

One calorie is equal to the amount of energy required to raise the temperature of one gram of water by one degree Celsius.

Energy is a fundamental property of matter that can take many forms, such as electrical, thermal, chemical, nuclear, and mechanical energy.

Learn more about Calorie here:

https://brainly.com/question/1178789

#SPJ1

The chemical formula [tex]Al_2SiO_5[/tex] can form the three minerals, andalusite, kyanite, and sillimanite under different combinations of temperature and pressure conditions. Option D is correct.

Learn more about the chemical formula: https://brainly.com/question/11574373

#SPJ11

No, during a course of reaction, multiple activated complexes can be formed for a particular type of reaction. An activated complex is a short-lived, high-energy intermediate state that occurs during a chemical reaction.

Energy is a fundamental concept in physics that describes the capacity of a physical system to do work or produce a change. It is a property of matter and radiation and can be converted from one form to another. There are various types of energy, including kinetic energy (energy of motion), potential energy (energy due to position or configuration), thermal energy (energy due to the temperature of a system), chemical energy (energy stored in the bonds between atoms and molecules), and nuclear energy (energy stored in the nucleus of an atom). The unit of energy is the joule (J) in the SI system.

To know more about energy visit :

https://brainly.com/question/11399976

#SPJ1

When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.

The amount of energy required to raise a substance's temperature is measured in terms of specific heat. It is the amount of energy (measured in joules) required to increase a substance's temperature by one degree Celsius per gram.

We must first determine the water sample's original temperature. The formula is as follows:

Q = mcΔT

Inputting the values provided yields:

700.00 cal = 25.0 g x 1.00 cal/g °C x (50°C - 22.0°C)

When we simplify this equation, we obtain:

ΔT = 700.00 cal / (25.0 g x 1.00 cal/g °C) = 28.0°C

Therefore, the initial temperature of the water sample is 22.0°C + 28.0°C = 50.0°C.

Inputting the values provided yields:

1.00 kcal = 25.0 g x 1.00 cal/g °C x (T - 50.0°C)

When we simplify this equation, we obtain:

T - 50.0°C = 1.00 kcal / (25.0 g x 1.00 cal/g °C) = 40.0°C

Therefore, When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.

To know more about specific heat visit:-

https://brainly.com/question/11297584

#SPJ1

Answer:

The mathematical function that represents breaking bonds requiring energy in a computational model is the addition symbol (+).

Breaking a bond requires the input of energy, which means that energy is being added to the system. Therefore, the energy required to break a bond can be represented as a positive value, which is added to the total energy of the system. For example, if the energy required to break a bond is 10 joules, and the initial energy of the system is 100 joules, the total energy after the bond is broken would be 110 joules.

On the other hand, when forming bonds, energy is typically released or given off by the system. This means that the energy required for bond formation can be represented by a negative value, which would be subtracted from the total energy of the system.

Explanation: