Identify the most oxidized compound. Group of answer choices CH3CH2CHO CH3CH2CH3 CH3CH2CH2OH CH3CH2OCH3 CH3CH2COOH

Answer:

Option A (0.043 g) is the correct answer.

Explanation:

Given:

= 43 mg

As we know,

[tex]1 \ mg = \frac{1}{1000} \ g[/tex]

then,

⇒ [tex]43 \ mg = \frac{43}{1000} \ g[/tex]

              [tex]= 0.043 \ g[/tex]

Thus, the above is the correct alternative.

Answer:

Overshooting the endpoint leads to a percent acetic acid in vinegar higher than the correct value.

Explanation:

When too much NaOH solution is added, the resulting number of equivalent hydronium (OH⁻) will be higher than what it is in reality. This would directly lead to the number of acetic acid moles in the vinegar being found higher than normal.

Answer: A volume of 37.5 mL of 0.300 M NaF would be required to make a 0.0450 M solution of NaF when diluted to 250.0 mL with water.

Explanation:

Given: [tex]M_{1}[/tex] = 0.300 M,   [tex]V_{1}[/tex] = ?

[tex]M_{2}[/tex] = 0.0450 M,    [tex]V_{1}[/tex] = 250.0 mL

Formula used is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2} \\0.300 M \times V_{1} = 0.0450 M \times 250.0 mL\\V_{1} = 37.5 mL[/tex]

Thus, we can conclude that a volume of 37.5 mL of 0.300 M NaF would be required to make a 0.0450 M solution of NaF when diluted to 250.0 mL with water.

Answer:

Volume of hot water required = 3.85L

Explanation:

Suppose volume of hot Then volume of water required cold water = = x L (10.0-x) L

Heat given by hot water (Q₁)

= mass of hot water x heat capacity of water X AT

= x L * 4.184 * J / g. к x(61.0-37.0) °℃.

And Heat absorbed by cold water (Q₂) = (10.0-x) L x 4.184 J/g*k x(37+0 -220) C

Since energy is consumed, Q₁ = Q2.

i.e. X*l *4.184*J/g*k*24C = (10.0-x)L x 184 5

24 x 15 (10.0-x) = 150. - 15x

x = 150. (24+15) = 3.846

So, volume of hot water required. = 3.85 L

When the temperature of the water increases the water becomes hot.

According to the question the volume of hot water required = 3.85L.

Suppose volume of hot Then the volume of water required cold water  is [tex]x L (10.0-x) L[/tex]

All the data are given in the question, which is as follows:-

The formula we are going to use is as follows:-

= mass of hot water x heat capacity of water X AT

= [tex]x L * 4.184 *(61.0-37.0) ^oC[/tex]

The heat absorbed by cold water (Q₂) = [tex](10.0-x) L *4.184 *(37+0 -220) ^oC[/tex]

Since energy is consumed, Q₁ = Q2.

[tex]X*l *4.18424C = (10.0-x)L * 184 524 * 15 (10.0-x) = 150. - 15xx = 150. (24+15) = 3.846[/tex]

Hence, the volume of hot water required is = 3.85 L

For more information, refer to the link:-

https://brainly.com/question/2817451

Answer:The green growing on the penny of copper and the rust forming on the nail of iron are chemical changes. Boiling away salt water, scraping iron filings from a mixture of sand with a magnet, and breaking a rock with a hammer, are physical changes.

Explanation:

Answer:

1) 16.0 moles Al

24.0 moles S

96.0 moles O

2)In 6.10 moles magnesium perchlorate, (Mg(CIO4)2 we have:

6.10 moles Mg

12.2 moles Cl

48.8 moles O

3)4.6 moles of propane (total) contains 13.8 moles of carbon and 36.8 moles of hydrogen atoms

4)The gold coin contains 7.8 *10^22 atoms

Explanation:

Step 1: Data given

Number of moles of aluminum sulfate, Al2(SO4)3 = 8.00 moles

Step 2: Calculate the number of moles

In 1 mol of aluminum sulfate, Al2(SO4)3 we have:

2 moles of Al

3 moles of S

12 moles of O

This means that in 8.00 moles of aluminum sulfate, Al2(SO4)3 we have:

2*8.00 = 16.0 moles Al

3*8.00 = 24.0 moles S

12*8 = 96.0 moles O

2. Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 6.10 moles of magnesium perchlorate, (Mg(CIO4)2

1 mol of magnesium perchlorate, (Mg(CIO4)2 has:

1 Mol of Mg

2 moles of Cl

8 moles of O

In 6.10 moles magnesium perchlorate, (Mg(CIO4)2 we have:

1 * 6.10 moles = 6.10 moles Mg

2*6.10 = 12.2 moles Cl

8*6.10 = 48.8 moles O

3. A sample of propane, C3H8, contains 13.8 moles of carbon atoms. How many total moles of atoms does the sample contain?

In 1 mol of propane, C3H8 we have:

3 moles of C and 8 moles of H

This means if we have 13.8 moles of carbon, we have 13.8/3 = 4.6 moles of propane, C3H8 and 4.6 *8 = 36.8 moles of H

So 4.6 moles of propane contains 13.8 moles of carbon and 36.8 moles of hydrogen atoms

4. A rare gold coin (24 karat, or 100% gold) has a mass of 25.54 g. How many atoms of gold are present in this coin?

Calculate moles of gold:

Moles = mass of gold / molar mass gold

Moles = 25.54 grams / 196.97 g/mol

Moles = 0.1297 moles

Calculate atoms:

Number of atoms = moles * number of Avogadro

0.1297 * 6.022 *10^23 = 7.8 *10^22 atoms

The gold coin contains 7.8 *10^22 atoms

Answer:

1) incorrect

2) incorrect

3) correct

4) correct

5) correct

6) incorrect

Explanation:

The correct electronic configuration of chromium is; [Ar] 3d⁵ 4s¹

The correct electronic configuration for Zr is; [Kr] 4d² 5s²

The correct electronic configuration of Cu^+ is; [Ar] 3d¹⁰

The electronic configuration of an atom refers to the arrangement of electrons in the atoms of such element.

The appropriate number of electrons and its properly written electronic configuration is clearly shown in this answer.

Answer:

10mL

Explanation:

Using the formula as follows:

CaVa = CbVb

Where;

Ca = concentration of acid, HBr (M)

Cb = concentration of base, Sr(OH)2 (M)

Va = volume of acid, HBr (Litres)

Vb = volume of base, Sr(OH)2 (Litres)

According to the information given in this question;

Ca = 0.24M

Cb = 0.24M

Va = ?

Vb = 10.0ml

Using CaVa = CbVb

0.24 × Va = 0.24 × 10

0.24Va = 2.4

Va = 2.4 ÷ 0.24

Va = 10mL

10mL of HBr is needed.

Answer:

1.40x10^24 atoms of H

Explanation:

Each triglyceride is different from the others on the basis of presence of fatty acids in it.

Triglycerides is a kind of fat and derivative of ester which is formed by the combination of glycerol and three fatty acids.

So in the triglyceride molecule three sub divided parts are present due to the presence of three fatty acids groups and these fatty acids will make difference in each triglyceride molecules.

Hence of fatty acids in triglyceride molecule makes it different from other.

To know more about triglyceride, visit the below link:

https://brainly.com/question/1147557

Answer:

It has different fatty acids.

Explanation:

This is a signature of triglycerides

Answer:

It would take 200,000 years for a spaceship traveling at the speed of light to go across the entire galaxy.

ummm is that chemistry?

Answer:

is this chem

Explanation:

Answer:

9.36 g

Explanation:

The equation of the reaction is;

C8H18(g) + 25/2 O2(g) ----> 8CO2(g) + 9H2O(g)

Number of moles of octane = 10.3g/ 114 g/mol = 0.09 moles

1 mole of octane yields 9 moles of water

0.09 moles of octane yields 0.09 × 9/1 = 0.81 moles of water

Number of moles of oxygen = 23g/32g/mol = 0.72 moles

12.5 moles of oxygen yields 9 moles of water

0.72 moles of oxygen yields 0.72 × 9/12.5 = 0.52 moles of water

Hence oxygen is the limiting reactant;

Maximum mass of water produced = 0.52 moles of water × 18 g/mol = 9.36 g

Answer:

pH - 3.41 = acidic

pH = 10.25 = basic

pH = 7.00 = neutral

[H+] -3.5 x 10-5 = acidic

[H+] - 6.7 x 10-9 = basic

[OH-]-5.8 x 10-4 = basic

[H0] -1.0 x 10-7 = neutral

[OH-] - 4.5 x 10-13 = acidic

Explanation:

Let us note that from the pH scale, a pH of;

0 - 6.9 is acidic

7 is neutral

8 - 14 is basic

But pH= - log [H^+]

pOH = -log [OH^-]

Then;

pH + pOH = 14

Hence;

pH = 14 - pOH

For [H+] -3.5 x 10-5

pH = 4.46 hence it is acidic

For [H+] - 6.7 x 10-9

pH = 8.17 hence it is basic

[OH-]-5.8 x 10-4

pH= 10.76 hence it is basic

[H0] -1.0 x 10-7

pH = 7 hence it is neutral

[OH-] - 4.5 x 10-13

pH = 1.65 hence it is acidic

Answer:

sp3 hybrid orbitals

Explanation:

The formula of a molecule gives us an idea of its structure and the nature of hybrid orbitals that are involved in the formation of the molecule.

AX4 corresponds to tetrahedral geometry. If a molecule is in tetrahedral geometry, it is most likely sp3 hybridized as usual.

Hence, a molecule with the formula AX 4 uses sp3 hybrid orbitals to form its bonds

Answer:

Calculate the moles of N2 molecules in 3.94 grams of nitrogen.

Calculate the grams of N2 in 5.03 x 1020 moles of nitrogen molecules.

Explanation:

Calculate the moles of N2 molecules in 4.73 liters of nitrogen gas. FALSE. You can't make this conversion using only the conversion factor with units of g/mol. To convert liters to moles are necessaries pressure, temperature and volume of the gas to use PV = nRT

Calculate the grams of N2 in 10.58 liters of nitrogen gas. FALSE. As explained, you need, P,V and T to find the moles of the gas. With the moles you can find the mass using the conversion factor of 28.02g/mol

Calculate the moles of N2 molecules in 3.94 grams of nitrogen. TRUE. You can find the moles of N2 as follows:

3.94g N2 * (1mol/28.02g) = 0.14 moles of N2 molecules

Calculate the grams of N2 in 5.03 x 1020 moles of nitrogen molecules. TRUE. The mass in 5.03x10²⁰ moles of nitrogen molecules is:

5.03x10²⁰ moles * (28.02g/mol) = 1.4x10²²g of nitrogen.

Answer:

Calcium

Explanation:

Zinc cannot displace Ca because calcium is above it in the reactivity series

Answer:

Sterilization refers to any process that removes, kills, or deactivates all forms of life and other biological agents like prions present in a specific surface, object or fluid, for example food or biological culture media.

the answer to the question is B.UV-B

Answer:

Oxygen, O₂ is the limiting reactant

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2H₂ + O₂ —> 2H₂O

Next, we shall determine the masses of H₂ and O₂ that reacted from the balanced equation. This can be obtained as follow:

Molar mass of H₂ = 2 × 1 = 2 g/mol

Mass of H₂ from the balanced equation = 2 × 2 = 4 g

Molar mass of O₂ = 16 × 2 = 32 g/mol

Mass of O₂O from the balanced equation = 1 × 32 = 32 g

SUMMARY:

From the balanced equation above,

4 g of H₂ reacted with 32 g of O₂.

Finally, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

4 g of H₂ reacted with 32 g of O₂.

Therefore, 10 g of H₂ will react with

= (10 × 32)/4 = 80 g of O₂.

From the calculations made above, we can see that a higher mass (i.e 80 g) of O₂ than what was given (i.e 5 g) is required to react completely with 10 g of H₂. Therefore, O₂ is the limiting reactant.

Oxygen has been the limiting reactant in the reaction.

A limiting reactant can be defined as the reactant in the reaction in which the product concentration has been dependent.

The balanced equation for the formation of water has been:

[tex]\rm 2\;H_2\;+\;O_2\;\rightarrow\;2\;H_2O[/tex]

For the formation of reaction to form 2 moles of water, 2 moles of hydrogen reacts with 1 mole of oxygen.

The moles can be calculated as:

Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]

The moles of Hydrogen in 10 g [tex]\rm H_2[/tex]:

Moles = [tex]\rm \dfrac{10}{2}[/tex]

Moles of hydrogen = 5 mol.

Moles of Oxygen in 5 grams Oxygen:

Moles = [tex]\rm \dfrac{5}{32}[/tex]

Moles of oxygen = 0.156 mol.

For the reaction with 2 moles of Hydrogen 1 mole of Oxygen has been required.

For reacting with 5 mol of Hydrogen, moles of oxygen required are:

Moles of oxygen = [tex]\rm \dfrac{1}{2}\;\times\;5[/tex]

Moles of oxygen required = 2.5 moles.

The available oxygen = 0.156 moles.

Since the moles of oxygen available is lesser than required, the formation of the product has been dependent on the concentration of the oxygen.

Thus, oxygen has been the limiting reactant in the reaction.

For more information about the limiting reactant, refer to the link:

https://brainly.com/question/14225536

Answer:

0.111 g

Explanation:

1 g = 1000 mg

Doctor ordered the following concentration of Claforan:

C = 1 g/100 mL x 1000 mg/1 g = 10 mg/mL

If we add 2 g iof Claforan, we obtain:

2 g Claforn ---- 180 mg/mL Claforan

To reach a concentration equal to C (10 mg/mL), we need:

10 mg/mL Claforan x 2 g Claforn/(180 mg/mL Claforan) = 0.111 g Claforn

Therefore, we have to add 0,111 g (111 mg) of Claforn to the bag of 100 ml D5W to obtain the ordered concentration of 10 mg/mL Claforan.  

Answer:

Explanation:

/ means divided by

* means multiply

1. formula is

partial pressure = no of moles(gas 1)/ no of moles(total)

0.30 mol CO/0.60 mol CO2 + 0.30 mol CO + 0.10 mol H20 ->

.3/(.6+.3+.1) =

.3/1 =

.3 =

partial pressure of CO

2.

.3 * .8 atm = .24

khanacademy

quizlet

The partial pressure of the CO is 0.24 atm if the total pressure of the mixture was 0.80 atm.

Dalton's Law of partial pressure states that the total pressure exerted by non reacting gaseous mixture at a constant temperature and given volume is equal to the sum of partial pressure of all gases.

Dalton's Law of partial pressure using mole fraction of gas

Partial pressure of carbon monoxide (CO) = Mole fraction of carbon monoxide (CO) × Total pressure

Now, we have to find the first mole fraction of CO

Mole fraction of carbon monoxide (CO) = [tex]\frac{\text{moles of solute}}{\text{total moles of solute}}[/tex]

                                                                  = [tex]\frac{\text{moles of CO}}{\text{moles of CO}_2 + \text{moles of CO} + \text{moles of H}_{2}O}[/tex]

                                                                  = [tex]\frac{0.30}{0.60 + 0.30 + 0.10}[/tex]

                                                                  = [tex]\frac{0.30}{1}[/tex]

                                                                  = 0.3

Now, put the value in above equation, we get that

Partial pressure of carbon monoxide (CO)

= Mole fraction of carbon monoxide (CO) × Total pressure

= 0.3 × 0.8

= 0.24 atm

Thus, the partial pressure of the CO is 0.24 atm is the total pressure of the mixture was 0.80 atm.

Learn more about the Dalton's Law of partial Pressure here: https://brainly.com/question/14119417

#SPJ2

The reduction of the species defines the gain of electrons. The iron is most likely to be reduced when reacts with zinc. Thus option A is correct.

Oxidizing agents are the species that gain electrons and get reduced, their oxidation number gets reduced when the metal reacts.

In the reactivity, series zinc is placed before iron and hence is a reducing agent that gets oxidized. Down the series, the reducing ability decreases while the oxidizing increases.

Therefore, option A. iron will be reduced when reacts with zinc.

Learn more about the reactivity series here:

https://brainly.com/question/2288636

#SPJ1

Answer:

11

1. 6.02×10 23

this is the answer Hope it helps you

Answer:

green gemstone

Explanation:

hope this helps someone

Answer:

Zn(s) + Cu²⁺(aq) ⇒ Zn²⁺(aq) + Cu(s)

Explanation:

Let's consider the molecular single displacement equation between Zn and Cu(NO₃)₂

Zn(s) + Cu(NO₃)₂(aq) ⇒ Zn(NO₃)₂(aq) + Cu(s)

The complete ionic equation includes all the ions and insoluble species.

Zn(s) + Cu²⁺(aq) + 2 NO₃⁻(aq) ⇒ Zn²⁺(aq) + 2 NO₃⁻(aq) + Cu(s)

The net ionic equation includes only the ions that participate in the reaction and insoluble species.

Zn(s) + Cu²⁺(aq) ⇒ Zn²⁺(aq) + Cu(s)

Answer:

Explanation:

The reaction is

H3Po4+3NH3\to→ (NH4)3PO4

Given,7.10g NH3=7.10g/molar mass of NH3

=7.10g/(17.031g/mol)

=0.416mol

From the reaction

3 mol ammonia reacted and produced 1 mole of ammoniam phosphate

So,One mole ammonia reacted and produced 1/ 3 mole ammonium phosphate.

And Also,0.416 mole ammonium reacted and produced (1/3)0.416=0.138 mole ammonium phosphate.

Hence 0.138mole=0.138mole*149.08 g/mole

               =20.573gm ammonium phosphate produced.

Hence 20.573g of ammonium phosphate is produced by the reaction of 7.10 g of ammonia.