if 7.90 mol of C5H12 reacts with excess O2, how many moles of CO2 will be produced by the following combustion reaction?

Answer:

C. The mass stays the same because the total number of atoms does not change

Explanation:

According to the law of conservation of matter/mass, matter cannot be created nor destroyed, hence, the amount of matter in the reactants must be the same amount in the products.

Using the photosynthetic reaction as a case study, carbon dioxide (CO2) and water (H2O) are the compounds that go into the reaction (reactants) while glucose and oxygen (O2) are the products of the reaction.

Using the law of conservation of matter to explain, the total mass of both the reactants and products stays the same because the total number of atoms does not change i.e. if 6 atoms of Carbon starts the reaction, 6 atoms of carbon will end it.

Answer:

C₄H₄N₂

Explanation:

Given that:

M+ = 80.

It implies that the number of nitrogen present in the molecule must also be even according to the Nitrogen rule.

So from the Formula CHN, the nitrogen will have to be 2 because if we make use of 4, it will exceed the given M+ which is 80.

∴

C₄ = 4 × 12 = 48

H₄  = 4 × 1   = 4

N₂ =  2 × 14 = 28      

                      80      

As such, the molecular formula of the compound is C₄H₄N₂

Answer:

Regla de Markovnikov En fisicoquímica orgánica, la regla de Markovnikov es una observación respecto a la reacción de adición electrófila.Regla de Markovnikov En fisicoquímica orgánica, la regla de Markovnikov es una observación respecto a la reacción de adición electrófila.

Explanation:

Answer:

The binding energy per nucleon of U-235 is lesser than that Fe-56

Explanation:

The binding energy refers to the energy required to hold the nucleons together in the nucleus of an atom.

It also corresponds to the energy that must be supplied in order to disintegrate the nucleus of an atom.

The binding energy per nucleon of elements depends on the number of nucleons present in the nucleus of the atom of that element. It is defined as the binding energy of the nucleus divided by the number of nucleons.

U-235 contains more nucleons than Fe-56, the binding energy per nucleon of U-235 is less than that of Fe-56. This is further confirmed by the fact that the greater the number of protons in the nucleus, the greater the coulumbic repulsion in the nucleus and the lesser the nuclear force of attraction between nucleons.

Answer:

20,8ml  NaCl 6M

Explanation:

C1V1 = C2V2

Answer:

318 kPa

Explanation:

Step 1: Given data

Step 2: Calculate the initial pressure of the gas

Assuming constant temperature and ideal behavior, we can calculate the initial pressure of the gas using Boyle's law.

P₁ × V₁ = P₂ × V₂

P₁ = P₂ × V₂ / V₁

P₁ = 95.5 kPa × 1.25 L / 0.375 L = 318 kPa

It last longer because it slows down the spread of bacteria.

Temperature, concentration, particle size, use of a catalyst.

Answer:

-219

Explanation:

1.5(339) - 1.5(485) = -219

The approximate enthalpy change for this substitution reaction is -219 kJ.

In the case of this substitution reaction, we need to find the enthalpy change when NaO₂C₂H₂Cl is converted to NaO₂C₂H₂F.

This reaction involves the breaking of the C-Cl bond and the formation of the C-F bond.

We have to subtract the bond energy of the C-F bond from that of the C-Cl bond and multiply by the number of moles involved.

So we will have;

ΔH= 1.500 mole [339.0  kJ/mol - 485.0 kJ/mol]

ΔH= -219 kJ

Learn more: https://brainly.com/question/1301642

Answer:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

Explanation:

The reaction of the problem occurs as follows:

H2S(g) + O2(g) → H2O(g) + SO2(g)

To balance the reaction we must balance oxygens:

H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

To balance the complete reaction:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

As the energy is evolved, 124kcal are as product in the reactio per mole of H2S. As the balanced reaction contains 2 moles of H2S, the heat evolved is:

124kcal*2 = 248kcal:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

And this is the balanced equation

Answer:

Explanation:

The pH of a solution can be found by using the formula

[tex]pH = - log [ { H_3O}^{+}][/tex]

From the question we have

[tex]ph = - log(7.8 \times {10}^{ - 13} ) \\ = 12.1079...[/tex]

We have the final answer as

Hope this helps you

The pH of this solution with a 7.8 × 10⁻¹³ M concentration of hydronium ion is equal to: D. 12.

Given the following data:

Concentration of hydronium ion = 7.8 × 10⁻¹³ M.

pH is literally the power of hydrogen ions and it can be defined as a measure of the molar concentration of hydrogen ions in a given solution.

We would determine the pH of this solution by using this formula;

pH = -log[H⁺]

pH = -log(7.8 × 10⁻¹³).

pH = -(-12.1)

pH = 12.1 ≈ 12.

Read more on pH here: brainly.com/question/24233266

#SJP2

Answer:

Selective serotonin reuptake inhibitors (SSRIs)

Explanation:

A synaptic cleft is a space that separates two neurons thereby forming a junction between two or more neurons. The synaptic cleft helps in the transfer of nerve impulse from one neuron to the other.

5-HT is found in the enteric nervous system located in the gastrointestinal tract and it helps in modulating cognition, memory, sleep, and numerous physiological processes.

Selective serotonin reuptake inhibitors (SSRIs), such as fluoxetine and citalopram are used to increase the level of 5-HT in the synaptic cleft by inhibiting its reuptake into the presynaptic terminal.

Answer:

It is D).cyclohexanone ( in acellus)

Explanation:

Answer:

50 CI₂ molecules

Explanation:

By looking at the stoichiometric coefficients, we can tell that if 2 atoms of potassium (K) react with chlorine gas (CI₂), 1 chlorine molecule would react.

With that in mind we can calculate how many CI₂ molecules would react with 100 K atoms:

Answer:

d

Explanation:

nCl2 = 0,1 -> nRCI = 0,2

M muéi = R + 35,5 = 14,9/0,2

-> R = 39: R la K

Answer:

d

Explanation:

nCl2 = 0,1 -> nRCI = 0,2

M muéi = R + 35,5 = 14,9 / 0,2

-> R = 39: R la K

Answer:

Chlorine

Chlorine has two naturally occurring isotopes. In a sample of chlorine, 75.77% of the atoms are Cl-35, with a mass of 34.97amu.

Explanation:

hope it helps thanks❤

Chlorine has two naturally occurring isotopes. In a sample of chlorine, 75.77% of the atoms are Cl-35, with a mass of 34.97amu.

List the known and unknown values ​​and edit the problem. Convert each percentage value into a decimal by dividing it by 100. Multiply this number by the atomic mass of that spot. Mix together each isotope to find the median atomic mass.

To calculate the maximum percentage of each isotope in a sample of something, chemists usually divide the atomic number of a particular isotope by the total number of atoms of all that isotope and multiply the result by 100.

Learn more about isotopes here: brainly.com/question/6258301

#SPJ2

Answer:

"The total pressure in a mixture of gases is equal to the sum of partial pressures of each gas"

Explanation:

Dalton's law of partial pressures state that, in a mixture of gases, the total pressure is equal to the sum of the partial pressure exerted by each gas of the mixture. The equation is:

Total pressure = Partial pressure Gas 1 + Partial pressure Gas 2 + .... + Partial pressure Gas n

To complete the sentence we can say:

"The total pressure in a mixture of gases is equal to the sum of partial pressures of each gas"

Considering the Dalton's partial pressure, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.

The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:

[tex]P_{T} =P_{A} +P_{B}[/tex]

This relationship is due to the assumption that there are no attractive forces between the gases.

Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A} =x_{A} P_{T}[/tex]

In summary, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.

Learn more:

Explanation:

1. As you go across a period, what is a useful comparison point?

A.

oxides

2. Most elements are

A.

allotropes

3. A metalloid is a(n) __ conductor of heat and electricity than a metal.

A.

better

4. What causes the formation of allotropes?

A.

pressure

As you move __and __ elements become more metallic.

A.

left, down

5. All of the following metalloids form allotropes except

A.

B

6. What is a chemical property of a metal?

A.

malleable

Answer:

See explanation

Explanation:

The atomic number refers to the number of protons in the nucleus, it also tells us the number of electrons in the neutral atom since the atom is electrically neutral because the number of protons and electrons are equal.

If an atom has the atomic number 11, then the electrons in the atom are arranged in the shells in the order; 2, 8, 1.

Two electrons are found in the innermost shell, eight electrons are found in the next shell and one electron is found on the outermost shell.

The nucleus of the atom is composed of a total of 23 nucleons; 11 protons and 12 neutrons.

Answer: hello some part of your question is missing below is the missing part

In an experiment to determine the % of ascorbic acid in Vitamin C Tablets by Titration with Potassium Bromate,

answer:

Oxidation half reaction of Vitamin C

Explanation:

The solution will turn cloudy dark purple even after reaching endpoint when allowed to settle with time. because of the Oxidation half reaction of Vitamin C. also during the Titration process few drops of starch solution will be added to help determine the endpoint of the experiment .

Answer:

Hence,  

1) removed  

2) drained through the stopcock  

3) get eye level with  

4) slow the draining  

5) switch to a new flask

Explanation:

After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be drained through the stopcock, and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and turn over to slow the draining heat up until the first layer is collected. Switch to a new flask get eye level with it to collect the second layer.

Answer: in 1975, the United States passed the Metric Conversion Act. The legislation was meant to slowly transition its units of measurement from feet and pounds to meters and kilograms, bringing the US up to speed with the rest of the world. There was only one issue: the law was completely voluntary. Of course, that meant it pretty much never took off

Explanation:

they passed the metric act

Answer:

Calcium Oxide is a drying agent, hence it dehydrates the reaction to give pure solid Iron ( III ) chloride, which cannot be done by calcium chloride.

It preferred to use calcium oxide rather than calcium chloride in preparation of iron (III) chloride because Calcium Oxide is a drying agent, hence it dehydrates the reaction to give pure solid Iron ( III ) chloride, which cannot be done by calcium chloride.

A process such as a chemical reaction that removes water.The atoms which constitute the molecule of water that is removed.

Hence,It preferred to use calcium oxide rather than calcium chloride in preparation of iron (III) chloride because Calcium Oxide is a drying agent,

Thus, it dehydrates the reaction to give pure solid Iron ( III ) chloride, which cannot be done by calcium chloride.

Learn  more about reactions here ;

https://brainly.com/question/17434463

#SPJ2

Answer:

See explanation

Explanation:

TLC is a chromatographic method in which the solute is spotted on a plate and the plate is placed in an air tight chamber containing a solvent. The solvent is maintained below the level of the spot. The capillary movement of the solvent through the plate achieves the required separation.

If two spots have Rf values of 0.25 and 0.26 respectively and then the plate was removed from the developing chamber, subsequently, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber.

It will be observed after the second development is complete that the new Rf values will be 0.50 and 0.52 respectively. It will just be as though the second chromatogram picked up from where the first chromatogram stopped.

Answer:

A photon is absorbed by the atom.

More energy is emitted or absorbed for case 2

Explanation:

According to the Bohr model of the atom, electrons occur in energy levels. The energy of each level is fixed. However, electrons can absorb photons and move from a lower to higher energy level or emit photons and move from a higher to a lower energy level.

In each case, the energy absorbed or emitted is equal to the difference in energy between the two energy levels.

Since energy level 3 is much higher than energy level 2, the electron absorbs more energy in moving from energy level 1 to energy level 3 than it absorbs when moving from energy level 1 to energy level 2.

Answer:

100 mL

Explanation:

The reaction that takes place is:

First we convert 500 mg of CaCO₃ into mmoles, using its molar mass:

Then we convert 5 mmoles of CaCO₃ into HCl mmoles, using the stoichiometric coefficients of the balanced reaction:

Finally we calculate the volume of a 0.10 M HCl solution (such as stomach acid) that would contain 10 mmoles:

Answer:

Kf = 0.389.

Explanation:

Hello there!

In this case, it turns out possible for us to solve this problem by firstly writing the equilibrium chemical equation and equilibrium expression for the formation of this complex:

[tex]B+C\rightleftharpoons BC\\\\Kf=\frac{[BC]}{[B][C]}[/tex]

Thus, we firstly calculate the concentrations at equilibrium, knowing that the reaction extent in this case is 0.00500mol (same as the formed moles of BC):

[tex][B]=[C]=\frac{0.0350L*1.00mol/L-0.00500mol}{0.0700L} =0.429M[/tex]

[tex][BC]=\frac{0.00500mol}{0.0700L} =0.0714M[/tex]

And finally, the equilibrium constant:

[tex]Kf=\frac{0.0714}{[0.429][0.429]}\\\\Kf=0.389[/tex]

Regards!

Answer:

mixture of compounds molecular weight

Explanation:

Gas Chromatography-mass spectrometry is used to find the mixture of compounds of each compound in a molecular weight. The Gas Chromatography also known as Mass Spectrometry (GC/MS) is an instrument that is used to separate chemical mixtures and identifies the components at a molecular level. It is one of the most accurate tools used for analyzing samples of the environment.

Explanation:

ethoxypropane

Ch3-ch2-o-ch2-ch2-och3