Answer:
Depends: Is it tennis or volleyball?
Explanation:
If it's volleyball, it's C, the other teams point.
If it's tennis, it's A, you get a re-do.
The density of oil is 0.8 g/cm^3. What is the mass of 36 cm^3 of oil?
Answer:
Refer to the attachment!~
The frequency of a wave is the inverse of the wave's
wavelength
itude
perod
velocit
quicklime which is calcium oxide, is made by heathig limestone in a furnace as per the equation :
CaCO3(s)CaO(s)+CO2
7.00Kg of calcium oxide was formed. what mass of calcium carbonate was heated?
Answer:
h2 PRD algo trata gevbjjgcvnkoytewxc.
Answer:
12.5kg
Explanation:
The process is explained in the paper
A small block is attached to a spring with a spring constant of 85 N/m. When the spring is compressed 0.30 meters and the released, the 0.50 kg block is launched. What is the final speed of the block?
A)
8.42 m/s
B)
3.91 m/s
C)
7.14 m/s
D)
15.3 m/s
Answer:
Explanation:
These Hooke's Law problems are tricky. Here's what we need to know that clears up the problem entirely. The final and also the max speed of the block will be reached at the point where the potential energy of the system is 0. So the equation we need, namely,
[tex]KE+PE=\frac{1}{2}kA^2[/tex] can be simplified down to
[tex]KE=\frac{1}{2}kA^2[/tex] and we solve this first for KE:
[tex]KE=\frac{1}{2}(85)(.30)^2[/tex] and, paying NO attention whatsoever to significant digits here (because if you did the answer you get is not one of the choices)
KE = 3.825 J. Now we can use that value of kinetic energy and solve for the speed we need:
[tex]KE=\frac{1}{2}mv^2[/tex] so
[tex]3.825=\frac{1}{2}(.50)v^2[/tex] so
[tex]v=\sqrt{\frac{2(3.825)}{.50} }[/tex] so
v = 3.91 m/s
When playing a game of disc golf, each throw to your target is considered to be a O Point O Stroke O Hit O Toss
Answer:
an o point i think
Explanation:
I need help with question 6
Answer:
0.16 h
Explanation:
Speed: 25km per hour
Speed=distance/time
25=4/t
t=4/25
t=0.16 hour
t=9.6 minuites
Brainliest please~~
please help me..im begging you
Answer: The equations in column A is matched with gas laws in column B as follows:
21. PV = nRT : (g) Ideal gas law
22. [tex]V_{1}n_{2} = V_{2}n_{1}[/tex] : (f) Avogadro's law
23. [tex]P_{1}V_{1}T_{2} = P_{2}V_{2}T_{1}[/tex] : (e) Combined Gas Law
24. [tex]P_{1}T_{2} = P_{2}T_{1}[/tex] : (d) Gay-Lusaac's law
25. [tex]V_{1}T_{2} = V_{2}T_{1}[/tex] : (c) Charles' law
26. [tex]P_{1}V_{1} = P_{2}V_{2}[/tex] : (b) Boyle's law
27. [tex]\frac{v_{1}}{v_{2}} = \frac{\sqrt{MM_{1}}}{MM_{2}} = \frac{\sqrt{p_{1}}}{p_{2}}[/tex] : (a) Graham's Law of effusion
Explanation:
(A) Ideal gas law: It states that the product of pressure and volume is directly proportional to the product of number of moles and temperature.
So, PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant
T = temperature
Boyle's law: At constant temperature, the pressure of a gas is inversely proportional to volume.So, [tex]P_{1}V_{1} = P_{2}V_{2}[/tex]
Charles' law: At constant pressure, the volume of a gas is directly proportional to temperature. So,[tex]V \propto T\\\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}\\V_{1}T_{2} = V_{2}T_{1}[/tex]
Gay-Lussac's law: At constant volume, the pressure of a gas is directly proportional to temperature.So, [tex]P_{1}T_{2} = P_{2}T_{1}[/tex]
Avogadro's law: At same temperature and pressure, the volume of gas is directly proportional to moles of gas.So, [tex]V_{1}n_{2} = V_{2}n_{1}[/tex]
Combined gas law: When Boyle's law, Charles' law, and Gay-lussac's law are combined together then it is called combined gas law. So,[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\or, P_{1}V_{1}T_{2} = P_{2}V_{2}T_{1}[/tex]
Graham's law of effusion: It states that the rate of effusion of a gas is inversely proportional to the square root of mass of its particles.[tex]\frac{v_{1}}{v_{2}} = \frac{\sqrt{MM_{1}}}{MM_{2}} = \frac{\sqrt{p_{1}}}{p_{2}}[/tex]
Thus, we can conclude that equation in column A is matched with gas laws in column B as follows:
21. PV = nRT : (g) Ideal gas law
22. [tex]V_{1}n_{2} = V_{2}n_{1}[/tex] : (f) Avogadro's law
23. [tex]P_{1}V_{1}T_{2} = P_{2}V_{2}T_{1}[/tex] : (e) Combined Gas Law
24. [tex]P_{1}T_{2} = P_{2}T_{1}[/tex] : (d) Gay-Lusaac's law
25. [tex]V_{1}T_{2} = V_{2}T_{1}[/tex] : (c) Charles' law
26. [tex]P_{1}V_{1} = P_{2}V_{2}[/tex] : (b) Boyle's law
27. [tex]\frac{v_{1}}{v_{2}} = \frac{\sqrt{MM_{1}}}{MM_{2}} = \frac{\sqrt{p_{1}}}{p_{2}}[/tex] : (a) Graham's Law of effusion
HELP, SCIENCE QUESTION I AM STUCK
6. Which of the following is NOT part of a circuit?
A. rim B. load C. power source D. conductor
Which of the following are
matter?
Chair, air, love, smell, hate,almonds, thought, cold, cold-drink, smell of perfume.
Answer:
everything except smell,hate,love,cold
Answer:
chair, air, almonds, cold-drink, smell of perfume
Explanation:
Anything that occupies space and has mass is called matter. Matter can exist in three physical states which are the:
Solid state
Liquid state
Gaseous state
therefore:
Solids: chair and almonds
Liquids: cold-drink
Gas: air and smell of perfume
•Love, smell, hate, thought, and cold are not in the category of matter/are not considered matter
•The sense of smell is not considered a form of matter. However, the smell or odour of a substance is classified as matter.
-The smell of any substance (say, perfume) is the gaseous form of that substance our olfactory system can detect (even at deficient concentrations).
Hence, the smell of some substances is considered matter.
A car travelling along a straight road has kinetic energy of 180 kJ. The brakes are applied, and it is brought to rest over a distance of 60 m. What is the average force of the car breaks?
A. 3 N
B. 3000 N
C. 10,800 N
Answer:
Given,
w= 180J
s=60m
W=F×s
180=F×60
180/60=F
F= 3 N
How do you use the periodic table to recall the ionic charge of an alkali metal, an alkaline earth metal, or aluminum?
The positive charge is the group number.
The negative charge is the group number.
The positive charge is the period number.
The negative charge is the period number.
Answer:
the positive charge is the period number
Explanation:
I might be wrong
Answer:
The positive charge is the group number.
Explanation:
A stone is thrown vertically upward with an initial velocity of 40m/s. Taking g = 10 m/s^2 find the maximum height reach by the stone and what is the net displacement and distance covered by the stone.
Explanation:
u=40
v=?
h=?
v²-u²=2gs
0²-40²=2×10×s
160=20s
s=160/20
=80m/s
total distance= upward distance ×downward distance
=80+80
=160m
total displacement=0 because u and v is the same.
Answer:
The maximum height is 80 m and the total distance covered by the stone is 160 m and the displacement is zero.
Explanation:
Final velocity v = 0
Initial velocity u = 40m/s
We know that,
Using equation of motion
[tex]v^{2} =u^{2} +2gh[/tex]
[tex]0-40^{2} =2[/tex] × [tex]10[/tex] × [tex]h[/tex]
The maximum height is:
[tex]h=80[/tex] [tex]m[/tex]
The stone will reach at the top and will come down
Therefore, the total distance will be:
[tex]s=h_{1} +h_{2}[/tex]
[tex]s=80m-80m=160m[/tex]
The net displacement is:
[tex]D=h_{1} -h_{2}[/tex]
[tex]D=80m-80m=0[/tex]
Hence, The maximum height is 80 m and the total distance covered by the stone is 160 m and the displacement is zero.
hope this helps.....
How to calculate displacement, velocity, acceleration.
On which planet would your weight be the most and the least?
a.Jupiter and Mercury
B.Jupiter and Neptune
c.Saturn and Neptune
D.
Saturn and Uranus
Answer: on jupiter you would weigh the most and on mars you would weigh the least
Explanation:
Match the reactants with the products. zinc sulfate + copper aluminum chloride + copper copper oxide copper + water copper sulfate + oxygen
Answer:
The Reactants Products
Copper sulfate + zinc → Zinc sulfate + copper
aluminum + copper chloride → Aluminum chloride + Copper
Copper + Oxygen → Copper oxide
Explanation:
The Reactants Products
Copper sulfate + zinc Zinc sulfate + copper
aluminum + copper chloride Aluminum chloride + Copper
Copper + Oxygen Copper oxide
First reaction can be described as a single replacement reaction
Second reaction is also a single replacement reaction just like the first reaction
The third is a synthesis reaction ( i.e. reaction in which elements combine to form single compound )
Parallel incident rays appear to bounce like they have all originated from the same point. What is this point called?
A. cross point
B. midpoint
C. bounce point
D. focal point
Answer pls…………………………
trong chân không có 2 điện tích điểm q1=3.10^-6C và q2=-6.10^-6C đặt tại A và B tương ứng cách nhau 100cm. Tính lực điện thành phần và tổng hợp do q1, q2 tác dụng lên q0=5.10^-6C đặt tại M
Answer:
ya bestie Anda benar terima kasih nanti sekarang selamat tinggal
What are various systems of unit?
Answer:
hlw its jess bregoli
your answer is here
SI (International System of Units) (meter-kilogram-second-ampere-kelvin-mole-candela)
FPS (foot-pound-second)
MKS (meter-kilogram-second)
CGS (centimeter-gram-second)
EMU (Electromagnetic) (centimeter-gram-second-abampere)
ESU (Electrostatic) (centimeter-gram-second-abcoulomb)
Atomic (bohr-electron mass-atomic second-electron)
MTS (meter-tonne-second)
Explanation:
hope it may help you !!
Answer:
there are 4 types of systems. They are ,
SI - accepted world wide
MKS - meter kilogram second
CGS - centimeter gram second
FPS - foot pound second
hope it helps.
Ball X has a mass of 8kg and is moving toward ball Y (which is sitting still) at 2m/s. After they collide, ball X is
sitting still. How fast is ball Y moving after the collision if it has a mass of 4kg?
Answer:
v = 4 m/s
Explanation:
Given :
Ball X :
Mass, m1 = 8kg ;
Initial Velocity, u1 = 2 m/s
Final velocity, v1 = 0
Ball Y:
Mass, m2 = 4kg ;
Initial Velocity, u2 = 0 m/s
Final velocity, v2 = v
(m1u1 + m2u2) = (m2v2 + m1v1)
(8*2 + 4*0) = (4*v + 4*0)
16 + 0 = 4v + 0
16 = 4v
v = 16 / 4
v = 4 m/s
Answer:
Explanation:
This is the Law of Momentum Conservation which for us looks like this:
[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:
[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and
16 + 0 = 0 + 4.0v and
16 = 4.0v so
v = 4.0 in the direction of ball X
A 15 cm length of wire is moving perpendicularly
through a magnetic field of strength 1.4 T at the rate
of 0.12 m/s. What is the EMF induced in the wire?
A. OV
C. 0.025 v
B. 0.018 V
D. 2.5 V
Answer: C or B
Explanation:
The EMF induced in the wire moving perpendicularly through a magnetic field is 0.025V. The correct option is C.
What is EMF?The EMF is the electro motive force which causes the current to induce in the object moving in the magnetic field.
Given is the length of wire L =15cm =0.15m, magnetic field strength B = 1.4T and velocity of wire V =0.12 m/s
EMF is related to the length of wire, magnetic field strength and velocity of wire proportionally.
ε = B x L x V
Plug the values, we get
ε = 1.4 x 0.15 x 0.12
ε = 0.025 Volts
Thus, the correct option is C.
Learn more about EMF.
https://brainly.com/question/15121836
#SPJ2
What is 3.75 x 10^-7?
Answer:
Explanation:
3.75 * 10^-7
=3.75 * 1/10^7
=3.75/10000000
=3/800000000
any base which has it's power negative do it's reciprocal then the power will be positive.
A radio has a 1.3 A current. If it has a resistance of 35 Ω, what is the potential difference?
Answer:
22
Explanation:
Answer:
45.5 v
Explanation:
I = 1.3 A
R = 35 Ω
V = I * R
V = 1.3 * 35 = 45.5 v
When do we have positive/negative and zero acceleration.Write down the terms..................pls help mee
Answer:
Positive acceleration is when an object is increasing its velocity, speeding up.
Negative acceleration is when an object is decreasing its velocity, slowing down from it’s motion.
Zero acceleration is when an object is either at rest or moving without speeding up or slowing down, in a constant way.
A educação física, enquanto componente curricular da educação básica. Qual a tarefa que educação física?? Alguem me ajuda por fvr ??
Answer:
como assim qual a tarefa que educação física? se você me explicar melhor eu consigo te responder !!
Explanation:
explain why heating destroys the magnetism in a permanent magnet?
Answer:
Excessive heat causes atoms to move more rapidly, disturbing the magnetic domains. As the atoms are sped up, the percentage of magnetic domains spinning in the same direction decreases. This lack of cohesion weakens the magnetic force and eventually demagnetizes it entirely.
state the factor that affect the gravity of a planet
Answer:
The planet's mass and size determine the gravity of a planet
Explanation:
The smaller and less mass a planet has, the less gravitational pull it has on things and vice versa. The same can be applied with all living things, we all have an extremely small gravitational pull.
in a series circuit, how does the voltage supplied by the battery compare to the voltages on each load?
Answer:
In a series circuit, how does the voltage supplied by the battery compare to the voltage on each load? The voltage of the battery is equal to the voltage of each load added together. ... The voltage across the two resistors must both have the same voltage of the battery.
Explanation:
mark me as BRAINLIEST
follow me
carry on learning
Answer:
The voltage of the battery is equal to the voltage of each load added together. The voltage across the two resistors must both have the same voltage of the battery.
>3
with respect to air the refractive index of ice is 1.31 and that of rock salt is 1.54 calculate the refractive index of rock salt with respect to ice
Answer:
1.17
Explanation:
Given that,
The refractive index of ice wrt air = 1.31
The refractive index of rock salt wrt air = 1.54
We need to find the refractive index of rock salt with respect to ice.
We know that,
refractive index = (speed of light in air or vaccum)/( speed of light in that medium)
So,
The speed of light in ice = c/(1.31)
The speed of light in rock salt = c/(1.54)
So, the refractive index of rock salt with respect to ice is :
[tex]\mu=\dfrac{1.54}{1.31}\\\\=1.17[/tex]
So, the required refractive index of rock salt wrt ice is 1.17.
Please answer in your own words and I will mark brainlist, Compare all matters from the view of passing light through them (name 3 types and write if they pass the light or not.)
Answer:
Light passes through the gas
Light passes through the pure water
Light passes through some solids
Explanation:
In gasses, there are many spaces between the molecules. These spaces allow light to pass through them without any interruption.
In pure water, there are some spaces between particles. these particles allow some light rays to pass theough, some to move through the common boundary and reflec5 some of them.
in solids, some allow light to pass through as they are transparent or translucent
