If ADD = 81, BAD = 49, and CAD = 64, then what is the value of ACA?

Answer:

its 72

Explanation:

i know it because i did it and thats how i know it

limitations of systems analysis and design​

Uhaul general mechanical questions 2021
Not a question. But the answers.

1) The PRIMARY purpose of the dual rear tires on this truck is to: (A) Reduce the chance of a blowout. (B) Withstand a heavier load and add greater stability. (C) Add more weight to the rear of the truck.
B
2) Which of these tools should be used on a Phillips-head screw?
B
3) Which arrow points to the alternator?
C
4) With the truck backing up and the front tires turned as shown, which way will the rear of the truck swing?
A
5) Above are four tools. Three of the tools have a similar function while one is different. Which tool performs the most different function of the four tools?
D
6) Which scaffolding above could probably hold more weight?
B
7) Which refrigerator will be easier to roll over uneven ground?
A
8) Assuming the pick-up trucks, trailers and road conditions are exactly the same, which vehicle will take a longer distance to stop?
B
9) What is the proper battery cable connection when jumping two automotive batteries? (A) Negative to Negative / Positive to Positive (B) Negative to Positive / Negative to Positive (C) It doesn't matter on 12-volt automotive batteries
A
10) Which of these filters is associated with airflow?
A
11) If a box of clothes weighing 10 lbs (4.5 kg) and a box of books weighing 10 lbs (4.5 kg) were placed on a scale, what is most likely to occur?
C
12) Which area will get the smoothest ride?
B
13) Which trailer has more downward pressure where it attaches to the car?
A
14) Which direction will wheel three rotate?
B
15) The tire above has a recommended tire pressure of 35 PSI, however, its current pressure is only 26 PSI. Which of the following could occur if driven on? (A) A tire blowout. (B) Unstable handling of the vehicle. (C) Both A & B.
C
16) Which is the proper position of the adjustable wrench for tightening a nut?
A
17) Which tire has more tread? (A) Image A (B) Image B (C) Cannot be determined
B
18) Which picture best illustrates the correct location for loading ONLY the washer in this trailer?
B
19) Which is the MOST LIKELY use for the following object? (A) Checking for a vacuum source. (B) Checking for the proper voltage at the battery. (C) Checking for electrical current traveling through a wire.
C
20) If this truck backs up with the front tires turned as shown, which way will the rear of the trailer swing?
B
21) Which illustration best demonstrates the safest ladder for this person to use?
A
22) Which method requires the least amount of effort to move the refrigerator?
A
23) With the side gears turning in the direction shown, in which direction will the top gear turn?
B
24) In order for the Hitch ball to be secured properly, what should be the last part assembled? (A) Nut (B) Shank (C) Cotter Pin
C
25) As the truck backs up, which way should the front tires be turned in order to make the trailer follow the road?
B

Given the following code, what logic would you need to include to print all even values stored within the array:

int[] myArray = {1,2,38,4,54,6,7,8,9,10};

for (int i = 0; i < myArray.length; i++) {
//your code goes here
}
NOTE: Your response should be just the missing logic--not the entire problem set.

beth chooses fresh vegetables every time she does marketing. she pares and cuts right away these vegetable considering that they are fresh. the moment she serves the appetizer, she washes the plate and uses it without drying. what statement best describes the situation inside teh box

Write a program that prompt the user to enter a bank balance. The balance entered by the user is read into a variable named balance. The program then prompts the user to enter the amount to be deposited. The amount entered by the user is read into a variable named deposit. The program that calculates the new balance, which is the present balance plus the deposit. The program then displays the new balance.

How do I get fix the code to make it input 3 values and get the correct output
-------------------------------------------------------------
12.20 LAB: Driving costs - functions

Driving is expensive. Write a program with a car's miles/gallon and gas dollars/gallon (both floats) as input, and output the gas cost for 10 miles, 50 miles, and 400 miles.

Output each floating-point value with two digits after the decimal point, which can be achieved as follows:
print('{:.2f}'.format(your_value))

Ex: If the input is:

20.0
3.1599

the output is:

1.58
7.90
63.20

Your program must define and call the following driving_cost() function. Given input parameters driven_miles, miles_per_gallon, and dollars_per_gallon, the function returns the dollar cost to drive those miles.

Ex: If the function is called with:

50 20.0 3.1599

the function returns:

7.89975

def driving_cost(driven_miles, miles_per_gallon, dollars_per_gallon)

Your program should call the function three times to determine the gas cost for 10 miles, 50 miles, and 400 miles.
---------------------------------------------------
I need help for this part
Ex: If the function is called with:

50 20.0 3.1599

how do I get it to input the three to get the output of 7.89975?
-------------------------------------
My code:

# Define your function here.
def driving_cost(driven_miles, miles_per_gallon, dollars_per_gallon):
return (driven_miles/miles_per_gallon) * dollars_per_gallon

if __name__ == '__main__':
# Type your code here.

# Miles per gallon from input
miles_per_gallon = float(input())

#Dollars per gallon from input
dollars_per_gallon = float(input())


# Display the results as output

print('{:.2f}'.format(driving_cost(10, miles_per_gallon,dollars_per_gallon)))
print('{:.2f}'.format(driving_cost(50, miles_per_gallon,dollars_per_gallon)))
print('{:.2f}'.format(driving_cost(400, miles_per_gallon,dollars_per_gallon)))