If sensed fuel in the Piper Archer reaches ____ gallons in either tank, the yellow Low Fuel caution light will illuminate on the MFD for the corresponding side

Answer:

60×60×24=86,400

Explanation:

i.e. 86,400 secs is 1 day

1 hour = 60 minutes

1 minute = 60 seconds

1 day = 24 hours

60 min. × 60 sec. × 24 hr.

60 × 60 × 24 = 86,400 seconds

∴ 86,400 seconds = 1 day

Answer:

Explanation: as,

v=f∧

v=200×10³×1.5×10³

v=2.7×10^7ms⁻¹

The velocity of the radio waves is 3 × 10⁸ ms⁻¹.

A radio station frequency = 200 KH

wavelength = 1.5 km

         Radio waves in the electromagnetic spectrum has the longest wavelength and it will always be below 300GHz. The radio waves can be generated with acceleration through some charged particles. Only through the transmitter via antenna the radio waves can gets transmitted. Radio waves can be used in all the electronic devices as mobile phones, radio communication, radars and navigations.

                               V = f λ

            Velocity,  v = ( 200 × 10³ ) × ( 1.5 × 10³ )

                               = ( 300 × 10⁶ )

                             v = 3 × 10⁸ ms⁻¹.

Hence, the velocity of the radio waves is 3 × 10⁸ ms⁻¹.

Learn more about the radio waves,

https://brainly.com/question/21995826

#SPJ2

Answer:

2PBr₃ + 3Cl₂ → 2PCl₃ + 3Br₂

2Na + MgCl₂ → 2NaCl + Mg

Explanation:

A balanced chemical equation is a chemical equation that have an equal number of elements of each type on both sides of the equation

Among the given chemical reactions, we have;

2PBr₃ + 3Cl₂ → 2PCl₃ + 3Br₂

In the above reaction;

The number of phosphorus, P, on either side of the equation = 2

The number of bromine atoms, Br, on either side of the equation = 6

The number of chlorine atoms, Cl, on either side of the equation = 6

Therefore, the number of elements in the reactant side and products side of the reaction are equal and the reaction is balanced

The second balanced chemical reaction is 2Na + MgCl₂ → 2NaCl + Mg

In the above reaction, there are two sodium atoms, Na,  one magnesium atom and two chlorine atoms on both sides of the reaction, therefore, the reaction is balanced

Explanation:

gravitational force or gravity is the force of attraction between objects that have mass.

frictional force is the forec that opposes motion (movement) when two surface are in contact. (acts in the opposite direction of motion)

so to sum it up,

- gravtional force is the force of attraction between objects that have mass.

- objects on the earth have weight because of gravitational force between them and the earth.

frictional force

- oppose motion

- slow down and stop moving objects and;

- produce heat

hope it helps :)

Answer:

800N

Explanation:

as we know that

weight = mass × acceleration due to gravity

= 80kg × 10 m/s^2

= 800N.

Answer:

jsjfj heddifii ididofi idididi hdhdii iridium didi buff joid duruvdudi 7u

Answer:

6 Ways To Promote Peace

Treat all people with kindness, regardless of race, gender orientation, sexual orientation, religion, etc.

Attend a peace rally.

Write to your government (local and federal)

Create a peaceful affirmation/mantra.

Don't engage in violence of any kind.

Don't purchase weapons.

Answer:

Un diafragma es una pieza de silicona o de goma reutilizable que cubre el cuello del útero. El diafragma se coloca dentro de la vagina con espermicida antes de tener relaciones sexuales para prevenir un embarazo. El diafragma es un dispositivo anticonceptivo que impide que los espermatozoides ingresen en el útero.

Answer:

[tex]F = kmg \\ k = \frac{F}{mg} [/tex]

Explanation:

F = k . m . g

=> F = k . mg

[tex] = > k = \frac{F}{mg} (ans)[/tex]

Answer:

1. a. 3,000 N

b. Repulsión

2. 46.875 × 10⁶ N/C

3. a. 81,000 J

b. 6.75 × 10⁹ V

Explanation:

1. Los parámetros dados son;

Q₁ = +12 μC, Q₂ = +16 μC

La distancia entre las cargas, r = 0.024

La magnitud de la fuerza electrostática, F, entre cargas se da como sigue;

[tex]F = k \times \dfrac{Q_1 \cdot Q_2}{r^2}[/tex]

Donde, k = constante de Coulomb = 9.0 × 10⁹ N · m² / C²

Por lo tanto, obtenemos;

F = 9.0 × 10⁹ × 12 × 10⁻⁶ × 16 × 10⁻⁶ / 0.024² = 3.000

La magnitud de la fuerza electrostática, entre las cargas, F = 3000 N

(b) Dado que tanto Q₁ como Q₂ son cargas positivas, y las cargas iguales se repelen entre sí, la fuerza es la repulsión.

2) La intensidad de un campo eléctrico, E, se da como sigue;

[tex]E = \dfrac{k \cdot Q}{r^2}[/tex]

La magnitud de la carga, Q = 24 μC

La distancia donde se mide el campo, r = 48 mm = 0.048 m

Por lo tanto, E = 9.0 × 10⁹ × 12 × 10⁻⁶ / 0.048² = 46,875,000 N / C

La intensidad de un campo eléctrico, E = 46,875,000 N / C = 46.875 × 10⁶ N / C

3. La magnitud de las cargas son;

Q₁ = 24 mC

Q₂ = -12 μC

La distancia entre las cargas, r = 0.032 m

un. El potencial eléctrico de una carga, [tex]U_E[/tex] , se da de la siguiente manera;

[tex]U_E = k \times \dfrac{Q_1 \cdot Q_2}{r}[/tex]

Por lo tanto;

[tex]U_E[/tex] = 9.0×10⁹ × 24 × 10⁻³ × (-12) × 10⁻⁶ /0.032 = -81,000

La energía potencial eléctrica entre la carga, Q₁ y Q₂= -81,000 J

b. El potencial eléctrico de Q₁ en Q₂, V₁ = [tex]k \times \dfrac{Q_1 }{r}[/tex]

Por lo tanto, V₁ = 9.0×10⁹ × 24 × 10⁻³/0.032 = 6.75 × 10⁹

El potencial eléctrico de Q₁ en Q₂, V₁ = 6.75 × 10⁹ V

Explanation:

a) copper

b) olive oil

Hope it helps✌✌

I want to improve my speed

Answer:

D

Explanation:

Answer:

Work, in physics, measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement. ... To express this concept mathematically, the work W is equal to the force f times the distance d, or W = fd.

1) Two major factors, mass and distance, affect the strength of gravitational force on an object.

2) Most common factors that affect gravity are mass of the body, distance from centers, shape of bodies,etc. Gravity is a binding force, always acting to bind any material closure and closure inwards. If we think this way, then gravity is maximum at its centre and decreases slowly away from its centre.

hope it helps you

mark my answer as brainlist and follow

have a nice day

We know

[tex]\boxed{\sf Relative\:velocity(V_{AB})=V_A-V_B}[/tex]

[tex]\\ \sf\longmapsto V_{AB}=2-2[/tex]

[tex]\\ \sf\longmapsto V_{AB}=0m/s[/tex]

The vector difference between the velocities of two bodies : the velocity of a body with respect to another regarded as being at rest  compare relative motion

[tex]Relative velocity $\left(\mathrm{V}_{\mathrm{AB}}\right)=\mathrm{V}_{\mathrm{A}}-\mathrm{V}_{\mathrm{B}}$$$\begin{aligned}&\longmapsto \mathrm{V}_{\mathrm{AB}}=2-2 \\&\longmapsto \mathrm{V}_{\mathrm{AB}}=0 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

The relative velocity of an object with respect to another is the velocity with which one object moves with respect to another object. The unit of velocity can be referred to as the ratio of unit of distance and that of time. The SI unit of Relative velocity is meter per second.

The concept of absolute velocity is mainly used in turbomachinery design and defines the velocity of a fluid particle in relation to the surrounding, stationary environment. Together with the relative velocity (w) and the circumferential speed (u), it forms the velocity triangle.

To learn more about relative velocity, refer

https://brainly.com/question/24430414

#SPJ2

Answer:

1040

Explanation:

The rules for significant digits is that non-zero digits are significant figures. The  zero in between 1 and 4 is significant because any zeroes between two significant digits are significant. Trailing zeroes if there is no decimal point are insignificant.

The number 1045.2 rounded to three significant digits would be 1040 because the rightmost zero is not a significant digit.

In positional notation, significant figures refer to the digits in a number that is trustworthy and required to denote the amount of something, also known as the significant digits, precision, or resolution.

The definition of a significant digit according to the criteria is a non-zero digit. Any zeroes between two significant digits, such as the one between 1 and 4, are noteworthy. In the absence of a decimal point, trailing zeroes are not relevant.

According to the criteria for significant digits, non-zero digits are important numbers. The zero between 1 and 4 is crucial, as is any zero between two significant digits. The trailing zeroes are irrelevant if there is no decimal point.

Thus, the number 1045.2 rounded to three significant digits would be 1040.

Learn more about significant figures here,

brainly.com/question/14359464

#SPJ2

[tex]\sf\underline{Solution:}[/tex]

Here , the density of the material is 4g cm³ but it is not given in CGS system.

$\sf{As\:we\:know\:that:}$

$\sf\bold{Density=}$ $\sf\dfrac{Mass}{Volume}$

$\space$

[tex]\sf{Now,according \: to \:the\:question:}[/tex]

$\sf\small{Density\:of\:the\:material=4}$ $\sf\dfrac{g}{cm^2}$

$\space$

$\sf{It\:is\:given\:that:}$

In the system of units the mass is 100gram.

$\space$

Hence,

$\sf{The\:mass\:unit\:for\:4g=}$ $\sf\dfrac{4}{100}$ $\sf{units}$

$\space$

In the system of units,the length is 10cm.

Henceforth,

$\sf\small{The\:length \:for\:1cm\:units=}$ $\sf\dfrac{1}{10}$ $\sf{units}$

$\space$

☆ Substitute the required values in the given formula-

$\sf\purple{Density=}$ $\sf\dfrac\purple{Mass}\purple{volume}$

$\space$

$\sf\underline\bold{Density\:of\:the\:material:}$

= $\sf\dfrac{4/100}{1/10^3}$ $\sf\bold{units}$

$\space$

= $\sf\dfrac{4/100}{1/1000}$ $\sf\bold{units}$

$\space$

= $\sf\dfrac{4000}{100}$ $\sf\bold{units}$

$\space$

$\sf\underline\bold\blue{=40\:units}$

$\sf\small{Therefore,option\:2nd\:is\:correct!}$

_______________________________

Answer: The mass of copper liberated is 0.196 g.

Explanation:

The oxidation half-reaction of copper follows:

[tex]Cu\rightarrow Cu^{2+}+2e^-[/tex]

Calculating the theoretical mass deposited by using Faraday's law, which is:

[tex]m=\frac{M\times I\times t(s)}{n\times F}[/tex] ......(1)

where,

m = actual mass deposited = ? g

M = molar mass of metal = 63 g/mol

I = average current = 2 A

t = time period in seconds = 5 min = 300 s (Conversion factor: 1 min = 60 sec)

n = number of electrons exchanged = 2

F = Faraday's constant = 96500 C/mol

Putting values in equation 1, we get:

[tex]m=\frac{63 g/mol\times 2A\times 300s}{2\times 96500 C/mol}\\\\m=0.196g[/tex]

Hence, the mass of copper liberated is 0.196 g.

Explanation:

the correct answer is option ( C ) and ( D )

Answer:

The force applied to make the object move

Answer:

input work = output work

E * ED = L* LD

Explanation:

The principle of lever is that input work is always equal to output work .

Ploughing field with harrow pulled by a tractor being a modern technology​ is true.

This involves the use of scientific knowledge to tackle different life problems and has different sectors.

Ploughing field with harrow pulled by a tractor involves machines and not manual labour which makes it a modern technology.

Read more about Technology here https://brainly.com/question/7788080

#SPJ1

First find Acceleration

[tex]\boxed{\sf Acceleration=\dfrac{v-u}{t}}[/tex]

[tex]\\ \sf\longmapsto Acceleration=\dfrac{42-0}{2}[/tex]

[tex]\\ \sf\longmapsto Acceleration=\dfrac{42}{2}[/tex]

[tex]\\ \sf\longmapsto Acceleration=21m/s^2[/tex]

Using second equation of kinematics

[tex]\boxed{\sf s=ut+\dfrac{1}{2}at^2}[/tex]

[tex]\\ \sf\longmapsto s=0(2)+\dfrac{1}{2}(21)(2)^2[/tex]

[tex]\\ \sf\longmapsto s=21(2)[/tex]

[tex]\\ \sf\longmapsto s=42m[/tex]

Answer:

D)0.0889kg

Explanation:

If a large atomic bomb produces around 8.00x10¹⁵J of energy, then from Einstein's energy law i.e E=mc² we can calculate that the amount of matter is  0.0889kg. The correct option is D.

The Einstein Energy Law, often referred to as Einstein's famous equation relates the energy of a particle (E) to its mass (m) and the speed of light (c). The equation is as follows:

E = mc²

This equation shows that energy (E) and mass (m) are equivalent and interchangeable and that a small amount of mass can be converted into a large amount of energy. This is the basis for understanding nuclear reactions and the energy released in processes like nuclear fusion and fission.

Here in the question,

To calculate the mass that is converted into energy in an 8.00x10¹⁵J nuclear reaction, we can rearrange the equation to solve for m:

m = E / c²

where c = 3 x 10⁸ m/s is the speed of light in a vacuum.

Substituting the values, we get:

m = 8.00x10¹⁵ J / (3 x 10⁸ m/s)²

m = 0.0889kg

Therefore, a large atomic bomb that produces around 8.00x10¹⁵ J of energy converts approximately 0.0889kg of matter into energy. This is a very small amount of matter, but because c² is such a large number, a huge amount of energy can be released from a small amount of matter in a nuclear reaction.

To learn more about Einstein's energy law click:

https://brainly.com/question/2292817

#SPJ2

Explanation:

because the moon has less mass than earth, the force due to gravity at the lunar surface is only about 1/6 that on earthso,the weight of a body on earth is 6×5N =30N

Answer:

v = 2.85 m/s

Explanation:

Given that,

A skipper on a boat notices wave crests passing his anchor chain every 5.6 s.

The distance between wave crests to be 16 m.

We need to find the speed of the waves. The speed of a wave can be calculated by the formula as follows :

[tex]v=f\lambda\\\\v=\dfrac{\lambda}{T}\\\\v=\dfrac{16}{5.6}\\\\v=2.85\ m/s[/tex]

So, the speed of the wave is 2.85 m/s.

Answer:

the ratio of a distance through which any part of a machine moves to that which the driving part moves during the same time.pls pls mark me branilest

Answer:

A although am not seeing the cheetah

THIS IS YOUR ANSWER :

Archimedes’ principle, physical law of buoyancy, discovered by the ancient Greek mathematician and inventor Archimedes, stating that any body completely or partially submerged in a fluid (gas or liquid) at rest is acted upon by an upward, or buoyant, force, the magnitude of which is equal to the weight of the fluid displaced by the body.

☺✍️HOPE IT HELPS YOU ✍️☺

Answer:

0.632456 m/s

Explanation: