if the circumference of the moon is 6783 miles what is its diameter in miles

Answer:

"9 more than A" is a verbal expression.

The approximate area of the surface formed by revolving the polar equation over the given interval about the polar axis is 67.59 square units.

To solve the question, we can use the integration capabilities of a graphing utility to approximate to two decimal places the area of the surface formed by revolving the polar equation over the given interval about the polar axis. Polar curve is a type of curve that is made up of points that represent polar coordinates (r, θ) instead of Cartesian coordinates.

A polar curve can be represented in parametric form, but it is often more convenient to use the polar equation for a curve. According to the question, r = 7 cos(20), [0, Phi/4] is the polar equation and we need to find the approximate area of the surface formed by revolving the polar equation over the given interval about the polar axis.

To solve the problem, follow these steps: Convert the polar equation to a rectangular equation. The polar equation r = 7 cos(20) is converted to a rectangular equation using the following formulas: x = r cos θ, y = r sin θx = 7 cos (20°) cos θ, y = 7 cos (20°) sin θx = 7 cos (θ - 20°) cos 20°, y = 7 cos (θ - 20°) sin 20°

Sketch the curve in the plane. We can sketch the curve of r = 7 cos(20) by plotting the points (r, θ) and then drawing the curve through these points. Use the polar equation to set up the integral for the volume of the solid of revolution.

The volume of the solid of revolution is given by the formula: V = ∫a b πf2(x) dx where f(x) = r, a = 0, and b = Φ/4.We can find the volume of the solid of revolution using the polar equation: r = 7 cos(20) => r2 = 49 cos2(20) => x2 + y2 = 49 cos2(20)Thus, f(x) = √(49 cos2(20) - x2) = 7 cos(20°) sin(θ - 20°)

So, V = ∫a b πf2(x) dx = ∫0 Φ/4 π(7 cos(20°) sin(θ - 20°))2 dθStep 4: Use a graphing utility to evaluate the integral to two decimal places. Using a graphing utility to evaluate the integral, we get V ≈ 67.59.

Learn more about Interval

brainly.com/question/30486507

#SPJ11

The sum of the geometric series is 3904/3125.

By using the formula for the sum of a geometric series, we'll have to identify the first term, the common ratio, and the number of terms.

Let's identify the first term, the common ratio, and the number of terms in the given series as shown below;

The first term, a = 4³/5³

Common ratio, r = 4/5

The number of terms, n = 3

We have identified the values of a, r, and n, we can now substitute them into the formula for the sum of a geometric series, shown below;

S_n = a(1 - rⁿ) / (1 - r)

S₃ = {(4³/5³) [1 - (4/5)³]} / [1 - (4/5)]

S₃ = {(64/125) [1 - (64/125)]} / [1/5]

S₃ = (64/125) [(125-64)/125] [5/1]

S₃ = (64/125) (61/125) (5)

Therefore, S₃ = 3904/3125.

Thus, the sum of the geometric series (4³/5³) + (4⁴/5⁴) + (4⁵/5⁵) is equal to 3904/3125.

To know more about the "geometric series": https://brainly.com/question/24643676

#SPJ11

The slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

What is slope?

Calculated using the slope of a line formula, the ratio of "vertical change" to "horizontal change" between two different locations on a line is determined. The difference between the line's y and x coordinate changes is known as the slope of the line.Any two distinct places along the line can be used to determine the slope of any line.

1) The given points , [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (6,8)[/tex] then,

=> slope  = [tex]\frac{y_2-y_1}{x_2-x_1}[/tex] = [tex]\frac{8-1}{6-0} = \frac{7}{6}[/tex]

2) The given points [tex](x_1,y_1) =(-1,10)[/tex] and [tex](x_2,y_2) = (-5,-4)[/tex] then,

=> Slope = [tex]\frac{-4-10}{-5+1} = \frac{-14}{-4}=\frac{7}{2}[/tex]

3)  The given points [tex](x_1,y_1) =(-10,2)[/tex] and [tex](x_2,y_2) = (-3,-5)[/tex] then,

=> slope = [tex]\frac{-5-2}{-3+10} = \frac{-7}{7}=-1[/tex]

4)  The given points [tex](x_1,y_1) =(-3,-4)[/tex] and [tex](x_2,y_2) = (-1,-8)[/tex] then,

=> slope = [tex]\frac{-8+4}{-1+3} = \frac{-4}{2}=-2[/tex]

5)The given points [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (-9,-9)[/tex] then,

=> slope = [tex]\frac{-9-1}{-9+0} = \frac{-10}{-9}=\frac{10}{9}[/tex]

Hence the slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

To learn more about slope refer the below link

https://brainly.com/question/16949303

#SPJ1

The shortest interval that contains 95% of the debt values is $9,492.02 to $20,507.98

Given that a credit risk study found that an individual with good credit score has an average debt of $15,000 and the debt of an individual with good credit score is normally distributed with standard deviation $3,000.

Then the 95% confidence interval can be calculated as follows:

Upper limit: µ + Zσ

Lower limit: µ - Zσ

Where

The z-score corresponding to a 95% confidence interval can be found using the standard normal distribution table.

The area to the left of the z-score is 0.4750 and the area to the right is also 0.4750.

The z-score corresponding to 0.4750 can be found using the standard normal distribution table as follows:z = 1.96Therefore

Upper limit: µ + Zσ= $15,000 + 1.96($3,000) = $20,880

Lower limit: µ - Zσ= $15,000 - 1.96($3,000) = $9,120.02

The shortest interval that contains 95% of the debt values is $9,492.02 to $20,507.98.

See more about confidence interval at: https://brainly.com/question/15712887

#SPJ11

Answer:

a=1/3

Step-by-step explanation:

First, expand the brackets by doing multiplication:

2+6a+3=3a+6

Then, move the unknown to the left and the numbers to the right:

3a=6-5

3a=1

a=1/3

The solution to the given equation is -1.

In mathematics, an equation is a formula that expresses the equality of two expressions, by connecting them with the equals sign =.

The solution of an equation is the set of all values that, when substituted for unknowns, make an equation true.

The given equation is 2+3(2a+1)=3(a+2)

2+6a+3=3a+2

6a+5=3a+2

6a-3a=2-5

3a=-3

a=-1

Therefore, the solution to the given equation is -1.

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ2

The perimeter of the smaller triangle would be = 28.1

A triangle can be defined as a three sided polygon that has a total internal angle of 180°.

To calculate the perimeter of the triangle is to find out the scale factor that exists between the two triangles.

The formula for scale factor = original object/new object

Scale factor= 8/7 = 1.14

The perimeter of the smaller triangle = 32/1.14

= 28.1.

Learn more about perimeter here:

https://brainly.com/question/25092270

#SPJ1

The equation has two distinct real roots if 64 - 4c > 0, one real root if 64 - 4c = 0, and no real roots if 64 - 4c < 0.

The discriminant of a quadratic equation of the form [tex]ax^2 + bx + c = 0[/tex] is given by [tex]b^2 - 4ac[/tex]. In the given quadratic equation, a = 1, b = 8, and c = c. Therefore, the discriminant is:

[tex]b^2 - 4ac[/tex]

[tex]= 8^2 - 4(1)(c)[/tex]

[tex]= 64 - 4c[/tex]

Now, we can use the discriminant to determine the nature of the solutions of the quadratic equation. If the discriminant is positive, the equation has two distinct real roots. If the discriminant is zero, the equation has one real root (a double root). If the discriminant is negative, the equation has no real roots (two complex conjugate roots).

In this case, we do not have enough information about the value of c to determine the nature of the roots of the equation. All we know is that the discriminant is 64 - 4c.

Hence, if 64 - 4c > 0, we can state that the equation has two separate real roots, one real root if 64 - 4c = 0, and no real roots if 64 - 4c < 0.

To know more about quadratic equation

brainly.com/question/30098550

#SPJ4

The slope of a linear equation is an important skill to have, as it can be used to identify the rate of change of the equation, and can be used to predict future values of the equation.

An equation is an expression that states the equality of two things. It typically consists of an equal sign (=) and two expressions on either side of the equal sign that represent the same thing. Equations are used to describe relationships between different variables and can be used to solve mathematical problems. They can also be used to show the relationships between different quantities in physics and chemistry.

a)The slope of this linear equation can be determined by using the slope formula, which is rise over run. In this equation, the rise is 6, and the run is 2, so the slope is 3.

b) The slope of this linear equation can be determined by using the slope formula, which is rise over run. In this equation, the rise is 3, and the run is -7, so the slope is -3/7.

c) The slope of this linear equation can be determined by using the slope formula, which is rise over run. In this equation, the rise is 4, and the run is 6, so the slope is 2/3.

Finding slope in tables and graphs is a common mathematical skill that is used to identify the rate of change of a linear equation. This is determined by finding the change in the dependent variable (the y-axis) divided by the change in the independent variable (the x-axis). This is what is referred to as the slope of the equation. To find the slope in tables and graphs, you must look at the differences between the points on the x-axis and y-axis, and divide the change in the y-axis by the change in the x-axis. This will give you the slope of the equation. Finding the slope of a linear equation is an important skill to have, as it can be used to identify the rate of change of the equation, and can be used to predict future values of the equation.

To know more about equation click-
https://brainly.com/question/2972832
#SPJ1

The distribution is skewed to the right.

If the median is to the left of the center of the box and the right whisker is substantially longer than the left whisker in a box plot, then the distribution is skewed to the right.

This means that the majority of the data is clustered on the left side of the box plot and there are some extreme values on the right side that are causing the right whisker to be longer.

The median being to the left of the center of the box indicates that the data is not symmetric and is pulled to the left by the majority of the values.

Learn more about skewed distribution

brainly.com/question/1604092

#SPJ11

In summary, to find the null spaces of the matrices given in exercises 9 and 10, use the Gauss-Jordan elimination method and refer to the Remarks that follow example 3 in section 4.2 of the text. This will give the dimension of the null space and the number of free variables.
In exercises 9 and 10, the null space of the given matrices can be found by solving the homogeneous linear system of equations. In order to do this, use the Gauss-Jordan elimination method. Refer to example 3 in section 4.2 of the text for a detailed explanation. Afterwards, use the Remarks that follow the example to determine the dimension of the null space and the number of free variables.

The null space of a matrix is the set of all vectors that produce a zero vector when the matrix is multiplied by the vector. Therefore, to find the null space of a matrix, the homogeneous linear system of equations needs to be solved. The Gauss-Jordan elimination method involves adding multiples of one row to another to get a row with all zeroes. After this is done for all the rows, the equations can be solved for the free variables. The number of free variables will determine the dimension of the null space. Refer to example 3 in section 4.2 of the text for more details.

The Remarks that follow the example are important when determining the dimension of the null space and the number of free variables. In the Remarks, it is mentioned that the number of free variables is equal to the number of columns with a zero row. Therefore, after using the Gauss-Jordan elimination method to get the row with all zeroes, the number of columns with a zero row can be counted. This will give the dimension of the null space and the number of free variables.

for such more questions on  Gauss-Jordan elimination

https://brainly.com/question/20536857

#SPJ11

Answer:

To find the equation of the line passing through the points (5,-12) and (0,-2), we first need to find the slope of the line:

slope = (change in y) / (change in x)

slope = (-2 - (-12)) / (0 - 5)

slope = 10 / (-5)

slope = -2

Now that we have the slope, we can use the point-slope form of the line equation to find the equation of the line:

y - y1 = m(x - x1)

where m is the slope, and (x1, y1) is one of the given points on the line.

Let's use the point (5,-12):

y - (-12) = -2(x - 5)

y + 12 = -2x + 10

y = -2x - 2

Therefore, the equation of the line passing through the points (5,-12) and (0,-2) is y = -2x - 2.

The power dissipated by the heater is 1260 watts (W).

What is a polynomial?

A polynomial is a mathematical expression consisting of variables (also known as indeterminates) and coefficients, which are combined using only the operations of addition, subtraction, and multiplication.

Given:

Current (I) = 10.5 A

Potential Difference (V) = 120 V

Unknown:

Power (P) = ?

The formula to calculate the power is:

P = VI

Substituting the given values:

P = 120 V × 10.5 A

P = 1260 W

It's important to note that the number of significant digits should be based on the precision of the given values. In this case, both values have three significant digits, so the answer should also have three significant digits. Thus, the final answer should be:

P = 1260 W (rounded to three significant digits).

Therefore, the power dissipated by the heater is 1260 watts (W).

To learn more about polynomial from the given link:

https://brainly.com/question/11536910

#SPJ1

An inverse of a modulo m for a = 55, m = 89 using the Euclidean algorithm is 34.

In order to find an inverse of a modulo for each of the following pairs of relatively prime integers using the Euclidean algorithm can be found by:

Using the Euclidean algorithm to find the greatest common divisor (gcd) of a and m. In this case, we have:

89 = 1 x 55 + 34

The gcd of 55 and 89 is 1.

Using the extended Euclidean algorithm, work backwards up the chain of remainders to express 1 as a linear combination of a and m. In this case, we have: 34 x 55 - 21 x 89

   The coefficient of a in the expression from step 3 is the inverse of a modulo m. In this case, the inverse of 55 modulo 89 is 34.

To verify that the inverse is correct, multiply a and its inverse modulo m. The product should be congruent to 1 modulo m. In this case, we have:

   55 x 34 = 1870

   11 = 1 x 11 + 0

Since the remainder is 0, we know that 55 x 34 is a multiple of 89, so it is congruent to 0 modulo 89. Therefore, we have:

55 x 34 ≡ 0 |89|

Adding 89 to the left-hand side repeatedly until we get a number that is congruent to 1 modulo 89, we find:

55 x 34 ≡ 0 + 89 x 7 ≡ 1 |89|

Therefore, the inverse of 55 modulo 89 is indeed 34.

To practice more questions about Euclidean algorithm:

https://brainly.com/question/24836675.

#SPJ11

Answer:

169 - 144p²

Step-by-step explanation:

(13 - 12p) × (13 + 12p)

each term in the second factor is multiplied by each term in the first factor

13(13 + 12p) - 12p(13 + 12p) ← distribute parenthesis

= 169 + 156p - 156p - 144p² ← collect like terms

= 169 - 144p²

we have

13x+6y=−30------------- > 6y=-30-13x--------------- > y=(-30-13x)/6

x−2y=−4-- > 2y=x+4-------- > y=(x+4)/2

Using a graphing tool---------- > see attached figure

the solution of the system is the point (-2.625,0688)

the best estimate pair for the solution to the system is (−2.5, 0.75)

Answer:

equal

Step-by-step explanation:

Answer:

The answer to 1 + 1 is 2.

Very complicated problem, please mark brainliest!

Answer:

1+1 = 2

Or, 1=2-1

1=1

we know value of one is one

so,

1+1=11

The work required to pump all the water out of the rectangular swimming pool over the top is approximately 2,323,200 ft-lb.

We have,

To find the work required to pump all the water out of the rectangular swimming pool, we can use the concept of work as the force multiplied by the distance.

First, let's calculate the weight of the water in the pool.

The weight of an object is given by the formula:

Weight = mass x gravitational acceleration

Since the density of water is given as 1 lb/ft³, we need to find the volume of water in the pool.

The volume of the pool is given by the formula:

Volume = length x width x depth

Volume = 50 ft x 30 ft x 6 ft = 9000 ft³

Now, let's calculate the weight of the water:

Weight = density x volume x gravitational acceleration

Weight = 1 lb/ft³ x 9000 ft³ x 32.2 ft/s² ≈ 290,400 lb

To pump all the water out over the top, we need to raise it to the height of the pool, which is 8 ft.

The work required to pump the water out is given by the formula:

Work = weight x height

Work = 290,400 lb x 8 ft = 2,323,200 ft-lb

Therefore,

The work required to pump all the water out of the rectangular swimming pool over the top is approximately 2,323,200 ft-lb.

Learn more about rectangles here:

https://brainly.com/question/15019502

#SPJ12

Answer:

X

Step-by-step explanation:

We first must check the total amount of breakfast. Y happens to have 130 instead of 125. Now, we see that W and Z have a majority on strawberries with oatmeal, which is not what we are looking for. The last answer we have is X, where there is a majority of oatmeal + blueberries and there is a total of 125 breakfasts.

Hope this helps!

Answer:

operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.

Answer:

operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.

Step-by-step explanation:

Step-by-step explanation:

No,

if the sprinkler covers a distance of 12 m meaning the 12 m is the diameter...then to find the area that it covers we use the formula for the circle since it's circular

A=πr2

A=3.142*36

A=113.112 cm3

Answer:

-21

Step-by-step explanation:

y^2 + 8y - 9                       y = -6

(-6)² + 8(-6) - 9

36 - 48 - 9

-21

So, the answer is -21

Answer:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Step-by-step explanation:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Consequently, the area of triangle $AMN$ is equal to $A = \frac{1}{2}bh = \frac{1}{2}(4)(2) = 4$ cm2.

The area of triangle $AMN$ in square $ABCD$ can be calculated using the formula for area of a triangle, $A = \frac{1}{2}bh$, where $b$ is the length of the base and $h$ is the height of the triangle.

Since side $BC$ has a length of 4 cm, we can determine that $N$ is located 2 cm away from point $B$ and 2 cm away from point $C$.

Similarly, we can conclude that $M$ is located 2 cm away from point $C$ and 2 cm away from point $D$.

Therefore, the base of triangle $AMN$ is equal to 4 cm, and the height of triangle $AMN$ is equal to 2 cm.

for such more questions on Consequently

https://brainly.com/question/26182883

#SPJ11

The total cost of compensated absences for Tamarisk Company for the years 2019 and 2020 was $348 + $1,399 = $1,747.

To calculate the cost of compensated absences for Tamarisk Company, we need to calculate the number of vacation days and sick days earned by the employees in 2019 and 2020, and then calculate the cost of the days earned but not taken.

Each employee earns 9 vacation days per year. As they can be taken after January 15th of the year following the year in which they are earned, the vacation days earned by the employees in 2019 can be taken in 2020. Therefore, in 2019, no vacation days were taken by any employee.

In 2020, the employees took a total of 8 vacation days. As there are 9 employees, the total vacation days taken in 2020 were 9 x 8 = 72.

Sick Days:

Each employee earns 7 sick days per year, and unused sick days accumulate. In 2019, the employees used a total of 5 sick days. Therefore, the unused sick days at the end of 2019 were 9 x 7 - 5 = 58.

In 2020, the employees used a total of 6 sick days, and the unused sick days at the end of 2020 were 58 + 9 x 7 - 6 = 109.

To find the cost of compensated absences. The unused sick days and vacation days must be multiplied to get the hourly wage rate in effect in a year.

In 2019, the cost of compensated absences was 58 x $6 = $348.

In 2020, the cost of compensated absences was (72 + 109) x $7 = $1,399.

Therefore, the total cost of compensated absences for Tamarisk Company for the years 2019 and 2020 was $348 + $1,399 = $1,747.

To know more about the cost of compensated absences

brainly.com/question/12987530

#SPJ4

The measure of ∠J in ΔJKL is approximately 57.5 degrees.

The measure of ∠J in ΔJKL can be found using the trigonometric function tangent, which is defined as the ratio of the opposite side to the adjacent side.

The straight line that "just touches" the plane curve at a given point is called the tangent line in geometry. It was defined by Leibniz as the line that passes through two infinitely close points on the curve.

tan(∠J) = JK/KL

tan(∠J) = 7.3/4.7

∠J = arctan(7.3/4.7)

∠J = 57.5 degrees (rounded to the nearest tenth of a degree)

Therefore, the measure of ∠J in ΔJKL is approximately 57.5 degrees.

Learn more about Triangles

https://brainly.com/question/27996834

#SPJ4

16h^(10/2) *remove the root sign

16h^5 *simplify the exponent

Answer: 16h^5

Step-by-step explanation: im correct

The probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793 and the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057 and the probability in part (b) is much higher because the standard deviation is smaller for the x distribution.

What do you mean by normally distributed data?

In statistics, a normal distribution is a probability distribution of a continuous random variable. It is also known as a Gaussian distribution, named after the mathematician Carl Friedrich Gauss. The normal distribution is a symmetric, bell-shaped curve that is defined by its mean and standard deviation.

Data that is normally distributed follows the pattern of the normal distribution curve. In a normal distribution, the majority of the data is clustered around the mean, with progressively fewer data points further away from the mean. The mean, median, and mode are all the same in a perfectly normal distribution.

Calculating the given probabilities :
(a) The probability that an 18-year-old man selected at random is between 70 and 72 inches tall can be found by standardizing the values and using the standard normal distribution table. First, we find the z-scores for 70 and 72 inches:

[tex]z-1 = (70 - 71) / 5 = -0.2[/tex]

[tex]z-2 = (72 - 71) / 5 = 0.2[/tex]

Then, we use the table to find the area between these two z-scores:

[tex]P(-0.2 < Z < 0.2) = 0.0793[/tex]

So the probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793.

(b) The mean height of a sample of eight 18-year-old men can be considered a random variable with a normal distribution. The mean of this distribution will still be 71 inches, but the standard deviation will be smaller, equal to the population standard deviation divided by the square root of the sample size:

[tex]\sigma_x = \sigma / \sqrt{n} = 5 / \sqrt{8} \approx 1.7678[/tex]

To find the probability that the sample mean height is between 70 and 72 inches, we standardize the values using the sample standard deviation:

[tex]z_1 = (70 - 71) / (5 / \sqrt{8}) \approx -1.7889[/tex]

[tex]z_2 = (72 - 71) / (5 / \sqrt{8}) \approx 1.7889[/tex]

Then, we use the standard normal distribution table to find the area between these two z-scores:

[tex]P(-1.7889 < Z < 1.7889) \approx 0.9057[/tex]

So the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057.

(c) The probability in part (b) is much higher because the standard deviation is smaller for the x distribution. When we take a sample of eight individuals, the variability in their heights is reduced compared to the variability in the population as a whole. This reduction in variability results in a narrower distribution of sample means, with less probability in the tails and more probability around the mean. As a result, it becomes more likely that the sample mean falls within a given interval, such as between 70 and 72 inches.

To know more about normal distribution visit :

brainly.com/question/29509087

#SPJ1

An interval is a set of real numbers that contains all real numbers lying between any two numbers of the set.

For each calculation, the smallest interval in which the result, using true instead of rounded values, must lie is as follows:

(a) 1.1062+0.947 = 2.0532 ≤ true result ≤ 2.053

(b) 23.46 - 12.753 = 10.707 ≤ true result ≤ 10.708

(c) (2.747) (6.83) = 18.6181 ≤ true result ≤ 18.6182

(d) 8.473/0.064 = 132.3906 ≤ true result ≤ 132.3907

To learn more about the “smallest interval” refer to the: https://brainly.in/question/52697950

#SPJ11

An assignment of probabilities to events in a sample space must obey all of the following: They must obey the addition rule for disjoint events, They must sum to 1 when adding over all events in the sample space, and The probability of any event must be a number between 0 and 1, inclusive. Hence, the correct option is All of the above.

Probability is the branch of mathematics that deals with the likelihood of a random event occurring. Probability is concerned with quantifying the probability of different results in a certain event.

The possibility that a specific event will occur is calculated using probability. Probability is calculated using several methods in mathematics, including axioms, probability spaces, events, random variables, and expectation values.

Learn more about Probability here: https://brainly.com/question/25839839

#SPJ11