if the gross weight of a bag of rice is 25.8 Kg and the net weight is 25 Kg, then...

a. The tare of the rice is _ grams

b. the tare percentage of the rice is _ % ​

Answer:

We can simplify the expression as follows:

5^(2000) + 5^(1999)

5^(1999) - 5^(1997)

= 5^(1999) * (1 + 1/5)

5^(1997) * (1 - 1/25)

= (5/4) * (25/24) * 5^(1999)

= (125/96) * 5^(1999)

Therefore, the value of the expression is (125/96) * 5^(1999).

Step-by-step explanation:

The rate at which the amount of bacteria is changing after 12 hours is 21.698 units/hour.

The given formula for the amount of bacteria present in a medium after t hours is:

[tex]a(t) = 16e^ (0.32t)[/tex]

Now, we need to find out at what rate the amount of bacteria is changing after 12 hours.

This means we need to find out the derivative of a(t) with respect to t and then substitute t = 12 in the derivative formula to get the rate of change of bacteria after 12 hours.

Differentiating the given formula for a(t) with respect to t, we get:

a'(t) = [tex]16(0.32)e^(0.32t)[/tex]

On substituting, t = 12, we get

a'(12) = [tex]16(0.32)e^ (0.32X12)[/tex]

On solving this, we get a'(12) = 21.698.

Therefore, the rate at which the amount of bacteria is changing after 12 hours is 21.698 units/hour.

Learn more about Bacteria here:

https://brainly.com/question/14067407

#SPJ11

The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.

We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.

for such more questions on  parabolic trajectory

https://brainly.com/question/13244761

#SPJ11

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

A fraction is a number that symbolizes a portion of a whole or a group of equal portions. The numerator represents the number of those parts being taken into consideration, while the denominator represents the overall number of equal parts that make up the whole.

given

We must change both fractions so that they have a common denominator in order to compare which can is less than half filled. 10 and 8 have a least common multiple (LCM) of 40.

20/40 is equivalent to 1/2.

So,

4/10 is equal to (4/10) x (4/4) Equals 16/40.

The formula for 5/8 is (5/8) x (5/5) = 25/40.

When we compare the two fractions, we can see that 25/40 is larger than 20/40 and that 16/40 is less than 20/40 (which is equal to 1/2).

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ1

a block slides along a track that descends through distance h. The track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. If we decrease h, will the block now slide to a stop in a distance that is greater than, less than, or equal to d?As per the given information, when a block slides along a track that descends through a distance h, the track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. Now if we decrease h, then the distance covered by the block before it comes to rest will also decrease. So the block will slide to a stop in a distance that is less than d. Hence the answer is less than d.If we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?

As the mass of the block increases, the force of friction acting on the block will also increase. Hence the stopping distance will also increase. So the stopping distance now will be greater than d. Hence the answer is greater than d.In conclusion, the answer to (a) is less than d, and the answer to (b) is greater than d.

for such more questions on conclusion

https://brainly.com/question/26093731

#SPJ11

Answer:

  -10/11

Step-by-step explanation:

You want the average rate of change of f(x) on the interval [-6, 5].

The average rate of change of function f(x) on the interval [a, b] is ...

  AROC = (f(b) -f(a))/(b -a)

  = (f(5) -f(-6))/(5 -(-6))

  = (-20 -(-10))/5 +6 = (-20 +10)/(5 +6)

  AROC = -10/11

The average rate of change on the interval is -10/11.

The other solutions are not viable because either they exceed the maximum number of hours Aisha can work (20 hours) or they do not meet the minimum amount Aisha needs to earn ($150).

If the ongoing research is successful, this approach might be an effective remedy. The only real way to resolve the problem is through negotiations between the military administration and the various opposition movements.

Part A: The correct system and graph to represent Aisha's situation is:

r + m ≤ 20 (maximum number of hours Aisha can work)

7r + 8.5m ≥ 150 (minimum amount Aisha needs to earn)

Part B: The viable solutions are:

r = 20, m = 0 (Aisha works only regular hours for 20 hours at $7 per hour)

r = 14, m = 6 (Aisha works 14 regular hours and 6 early morning hours at $7 per hour and $8.50 per hour, respectively)

r = 0, m = 18 (Aisha works only early morning hours for 18 hours at $8.50 per hour)

To know more about amount visit:-

brainly.com/question/28193995

#SPJ1

Answer: 23 degrees

Step-by-step explanation:

Assuming that 117 is the entire angle we can find that:

94+x = 117

Subtract 94 from both sides:

x = 117-94

x = 23 degrees

By using differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5. It will be 32,572.03 in³. Which is option (d).

The possible error in measuring the radius of the sphere is 0.5 in

The formula for the volume of a sphere is given by V(r) = 4/3πr³

The volume of the sphere when r=72 in is given by V(72) = 4/3π(72)³

When r= 72 + 0.5 in= 72.5 in, the volume of the sphere can be calculated using the formula:

V(72.5) = 4/3π(72.5)³

The difference between these two volumes, V(72) and V(72.5), gives us the maximum error while measuring the volume of a sphere. It can be calculated as follows:

V(72.5) - V(72) = 4/3π(72.5)³ - 4/3π(72)³= 4/3π [ (72.5)³ - (72)³ ]= 4/3π [ (72 + 0.5)³ - 72³ ]= (4/3)π [ 3(72²)(0.5) + 3(72)(0.5²) + 0.5³ ]≈ (4/3)π [ 777.5 ]= 3.28 × 10⁴ in³

Therefore, the maximum error while measuring the volume of a sphere with a radius of 72 in, where the possible error in measuring the radius is 0.5 in, is approximately 3.28 × 10⁴ in³ or 32,572.03 in³. Therefore coorect option is (D).

To know more about the maximum error: https://brainly.com/question/13370015

#SPJ11

Answer:

12

Step-by-step explanation:

i think its right

Answer:

  (B)  60 degrees

Step-by-step explanation:

You want the measure of angle A = x+2, given that it forms a linear pair with angle B = 2x+4.

The sum of angles in a linear pair is 180°

  A +B = 180

  (x +2) +(2x +4) = 180 . . . . use the given expressions

  3x +6 = 180 . . . . . . . . . simplify

  x +2 = 60 . . . . . . . . . divide by 3. Angle A = x+2 = 60

The measure of angle A is 60 degrees.

(a) The probability that exactly two cars finish the race is 0.0512.

(b) The probability that at most two cars finish the race is 0.05792.

(c) The probability that at least three cars finish the race is 0.94208.

(a) To determine the probability that exactly two cars finish the race, we have to use binomial distribution. In this case, we have n = 5 trials, and p = 0.8 is the probability that a car finishes the race (1 - 0.2). Using the binomial distribution formula:

P(X = k) = (nCk)(p^k)(1 - p)^(n - k)

Where X is the number of cars that finish the race, we get:

P(X = 2) = (5C2)(0.8²)(0.2)³= (10)(0.64)(0.008)= 0.0512

Therefore, the probability that exactly two cars finish the race is 0.0512.

(b) To determine the probability that at most two cars finish the race, we have to calculate the probabilities of 0, 1, and 2 cars finishing the race and add them up.

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)= (5C0)(0.8⁰)(0.2)⁵ + (5C1)(0.8¹)(0.2)⁴ + (5C2)(0.8²)(0.2)³= 0.00032 + 0.0064 + 0.0512= 0.05792

Therefore, the probability that at most two cars finish the race is 0.05792.

(c) To determine the probability that at least three cars finish the race, we can calculate the probability of 0, 1, and 2 cars finishing the race and subtract it from 1, which gives us the probability of at least three cars finishing the race.

P(X ≥ 3) = 1 - [P(X = 0) + P(X = 1) + P(X = 2)]= 1 - (0.00032 + 0.0064 + 0.0512)= 0.94208

Therefore, the probability that at least three cars finish the race is 0.94208.

Learn more about binomial distribution here: https://brainly.com/question/24756209

#SPJ11

(a) Using the Trapezoidal rule, T8 = (1/16)[cos(0) + 2cos(1/16) + 2cos(2/16) + ... + 2cos(7/16) + cos(1)].

Using the Midpoint rule, M8 = (1/8)[cos(1/16) + cos(3/16) + ... + cos(15/16)].

(b) The error in the Trapezoidal rule is bounded by (1/2880)(1-0)^3(max|f''(x)|), where f''(x) = -4x^2sin(x^2) and 0 <= x <= 1. Therefore, the error in T8 is approximately 0.00014. The error in the Midpoint rule is bounded by (1/1920)(1-0)^3(max|f''(x)|), which gives an approximate error of 0.00011 for M8.

(c) Let n be the number of intervals in the approximation.

Then, the error bound for the Trapezoidal rule is (1/2880)(1-0)^3(max|f''(x)|)(1/n^2), and the error bound for the Midpoint rule is (1/1920)(1-0)^3(max|f''(x)|)(1/n^2).

Setting these equal to 0.0001 and solving for n, we get n >= 129 and n >= 160 for the Trapezoidal and Midpoint rules, respectively. Therefore, we should choose n >= 160 to ensure that both approximations are accurate to within 0.0001.
For more questions like Midpoint rule click the link below:

https://brainly.com/question/17218343

#SPJ11

Answer:

P= 40 ft

Step-by-step explanation:

Perimeter is the sum of all the lengths

So,

Perimeter= 6+4+15+10ft

= 35ft

Nearest ten can be 40ft or 30ft

If you succeed In understanding then kindly mark my answer the brainliest. Thank you :)

The rate of change of the distance for limousine is less than the rate of change of the convertible.

How much a quantity changes over a specific time period or interval is the subject of the mathematical notion of rate of change. Several real-world occurrences are described using this basic calculus notion.

In mathematics, the ratio of a quantity change to a time change or other independent variable is used to indicate the rate of change. For instance, the rate at which a location changes in relation to time is called velocity, and the rate at which a velocity changes in relation to time is called acceleration.

The equation of the distance travelled by the convertible is given as:

y = 35x

The equation of the limousine can be calculated using the coordinates of the graph (1, 30) and (2, 60).

The slope is given as:

slope = (change in y) / (change in x) = (60 - 30) / (2 - 1) = 30

Using the point slope form:

y - 30 = 30(x - 1)

y = 30x

So the equation of the limousine is y = 30x.

Comparing the rates, that is the slope we observe that, the rate of change of the limousine is lower than the rate of change of the convertible.

Hence, the rate of change of the limousine is less than the rate of change of the convertible.

Learn more about rate of change here:

https://brainly.com/question/29181502

#SPJ1

The actual errors for Exercise 1 can be computed by subtracting the calculated values from the true values of the functions. For example, the actual error for sin(1.1) can be found by subtracting sin(1.1) = 0.8912 from the calculated value of 0.8890. The actual error in this case is 0.0022.

Error bounds for these functions can be found using the error formulas. For the function f(x) = sin x, the error bound can be found using the formula |E| <= M|x-a|, where M is the maximum value of the first derivative of the function, and a is the value of x at which the error is computed. In this case, M = 1 and a = 1.1, so the error bound is |E| <= 1 * |1.1 - 1.1| = 0.  

For the function f(x) = ex - 2x2 + 3x - 1, the error bound can be found using the formula |E| <= M|x-a|2, where M is the maximum value of the second derivative of the function, and a is the value of x at which the error is computed. In this case, M = e and a = 1.1, so the error bound is |E| <= e * |1.1 - 1.1|2 = 0.

Learn more about errors:

https://brainly.com/question/29481949

#SPJ11

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is called the time saved.

An experiment is a controlled study in which a scientist manipulates a variable in order to determine its effects. An experiment must have a testable hypothesis, be replicable, and produce empirical evidence.

Discussing the time difference in an experiment. In an experiment, it takes one hour to memorize all of the words on a list, and two years later, they are relearned in 45 minutes.

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is referred to as the time saved.

Time saved is the difference between the total time it takes to finish a process with a particular method and the total time it would take to complete the same process without that method.

Learn more about the Time difference here:

brainly.com/question/30132266

#SPJ11

Answer:

The solution set is (13,− 32). A quadratic equation of the form x 2= k can be solved by factoring with the following sequence of equivalent equations.

Step-by-step explanation:

Answer:

The midpoint of the diameter is (4, 1)

This is the center of the circle

=====================================================

Explanation:

Add up the x coordinates and divide in half

(-1+9)/2 = 8/2 = 4

The x coordinate of the midpoint is x = 4

Repeat for the y coordinates

(4 + (-2))/2 = (4-2)/2 = 2/2 = 1

The y coordinate of the midpoint is y = 1

The midpoint is located at (x,y) = (4,1)

The midpoint of any diameter is the center of the circle. This is because all diameters go through the center.

The distance from the center to either endpoint represents the radius of the circle (aka half the diameter).

If θ = 1π/6 then six trigonometric functions of θ are: sec(θ), cos(θ), tan(θ), cot(θ), is  [tex]((2 \sqrt{(3)})[/tex], [tex]\sqrt(3)/2[/tex], [tex]\sqrt{(3)}/3[/tex], and [tex]\sqrt{(3)[/tex], respectively.

To find the exact values of sec(θ), cos(θ), tan(θ), and cot(θ) when θ = π/6 radians, we can use the unit circle and the basic trigonometric ratios.

First, we locate the point on the unit circle corresponding to θ = π/6, which has coordinates[tex](\sqrt{(3)}/2, 1/2).[/tex]

Then, we can use the definitions of the trigonometric ratios to calculate their exact values:

sec(θ) = 1/cos(θ) = [tex]2\sqrt3 = (2 \sqrt{(3)})[/tex]

cos(θ) = adjacent/hypotenuse =[tex]\sqrt{(3)}/2[/tex]

 tan(θ) = opposite/adjacent = [tex]\sqrt{(3)}/3[/tex]

 cot(θ) = adjacent/opposite = [tex]\sqrt(3)[/tex]

Therefore, the exact values of sec(θ), cos(θ), tan(θ), and cot(θ) when θ = π/6 are [tex]((2 \sqrt{(3)})[/tex], [tex]\sqrt(3)/2[/tex], [tex]\sqrt{(3)}/3[/tex], and [tex]\sqrt{(3)[/tex], respectively.

To learn more about 'trigonometric functions':

https://brainly.com/question/25618616

#SPJ11

The Simpson's rule gives a more accurate approximation of the definite integral.

The question requires you to use both the trapezoidal rule and Simpson's rule to approximate the value of a definite integral for the given value of n. Then, you should round your answers to four decimal places and compare the results with the exact value of the definite integral.Integral: 0 - 4 for x^2 dx, n=4Using Trapezoidal Rule:The Trapezoidal rule is a numerical integration method used to calculate the approximate value of a definite integral. The rule involves approximating the region under the graph of the function as a trapezoid and calculating its area. The formula for Trapezoidal Rule is given by:∫baf(x)dx≈h2[f(a)+2f(a+h)+2f(a+2h)+……+f(b)]whereh=b−anUsing n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore,x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/2)[f(x0) + 2f(x1) + 2f(x2) + 2f(x3) + f(x4)](1/2)[0 + 2(1) + 2(4) + 2(9) + 16] = 37

Using Simpson's Rule:Simpson's rule is a numerical integration method that is similar to the Trapezoidal Rule, but the function is approximated using quadratic approximations instead of linear approximations. The formula for Simpson's Rule is given by:∫baf(x)dx≈h3[ f(a)+4f(a+h)+2f(a+2h)+4f(a+3h)+….+f(b)]whereh=b−an, and n is even.Using n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore, x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/3)[f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + f(x4)](1/3)[0 + 4(1) + 2(4) + 4(9) + 16] = 20Comparing the results with the exact value of the definite integral, we have:Integral 0 - 4 for x^2 dx = ∫4.0x^2 dx = [x^3/3]4.0 - [x^3/3]0 = 64/3 ≈ 21.3333Thus, using Trapezoidal Rule, we get an approximation of 37, which has an error of 15.6667, while using Simpson's Rule, we get an approximation of 20, which has an error of 1.3333. Therefore, Simpson's rule gives a more accurate approximation of the definite integral.

Learn more about Approximation

brainly.com/question/30707441

#SPJ11

If a triangle with all sides of equal length has a perimeter of 15x + 27, the expression for the length of one of the sides is (5x + 9).

The perimeter of a triangle is the sum of the lengths of all three sides. If all the sides of the triangle are equal, you can find the length of one side by dividing the perimeter by 3. Here, the perimeter is given as 15x + 27.

Therefore, the length of one side will be (15x + 27) / 3 = 5x + 9. Hence, an expression for the length of one of the sides is (5x + 9).

Learn more about expression here: brainly.com/question/1859113.

#SPJ11

Jana, because she has the highest ratio since 8/10 is greater than 9/12.

A ratio is a comparison of two numbers or quantities expressed in relation to each other. It represents the relative size or magnitude of one quantity with respect to another. Ratios are typically written as a fraction, with the first number being the numerator and the second number being the denominator, and can also be expressed as a decimal or percentage.

Batting average is a statistical measure used in baseball to evaluate a player's performance at the plate. It is calculated as the ratio of a player's total number of hits to their total number of at-bats (the number of times they attempt to hit the ball).

In the given question,

A higher batting average indicates a better performance, since it means the player is successfully hitting the ball more often.

In this case, we are given the number of hits and attempts for two players, Jana and Tasha. To compare their batting averages, we need to calculate the ratio of their hits to their attempts.

Jana has hit the ball 8 times out of 10 attempts, so her batting average is 8/10 = 0.8.

Tasha has hit the ball 9 times out of 12 attempts, so her batting average is 9/12 = 0.75.

To determine which player has the better batting average, we compare their ratios. Since 0.8 is greater than 0.75, Jana has the higher ratio and therefore the better batting average.

So, the answer is Jana, because she has the highest ratio (8/10 = 0.8), which means she has the better batting average compared to Tasha (9/12 = 0.75).

To know more about ratios, visit:

https://brainly.com/question/13419413

#SPJ1

The parking lot has a width of around [tex]0.937[/tex] meters.

This same large percentage of govt, company, and industry use metric measurements, but imperial measurements are still frequently used for fresh milk sales and are marked with the metric equiv for journey distances, vehicle speeds, and sizes of returnable milk canisters, beer glasses, and cider glasses.

100 centimeters make up one meter. Meters are able to gauge a building's length or a playground's dimensions. 1000 meters make up one kilometer.

[tex]3760 cm = 37.6 m[/tex]

Solve for the width,

[tex]area = (1/2) * (base1 + base2) * height[/tex]

where,

base1 [tex]= 73.4 m[/tex]

base2 [tex]= 37.6 m[/tex]

area [tex]= 2,930.4[/tex] square meters

Let's solve for the height first,

[tex]height = 2 * area / (base1 + base2)[/tex]

[tex]height = 2 * 2,930.4 / (73.4 + 37.6)[/tex]

[tex]height = 2 * 2,930.4 / 111[/tex]

[tex]height = 56.16 m[/tex]

We nowadays can apply the algorithm to determine the width.

[tex]width = (area * 2) / (base1 + base2) * height[/tex]

[tex]width = (2 * 2,930.4) / (73.4 + 37.6) * 56.16[/tex]

[tex]width = 5856.8 / 111 * 56.16[/tex]

[tex]width = 5856.8 / 6239.76[/tex]

[tex]width = 0.937[/tex]

Therefore, the width of the parking lot is approximately [tex]0.937[/tex] meters.

To know more about meters visit:

https://brainly.com/question/22552981

#SPJ1

The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.

Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).

This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.

To know more about function click here :

https://brainly.com/question/12976257

#SPJ11

A right square pyramid formed by the junction of the solid would have a square-shaped cross section.

This is thus because a square pyramid has four triangular sides that meet at a shared vertex on its square base. The cross section of a pyramid formed when a plane meets it parallel to the base and perpendicular to one of the triangular sides is a square. Because the pyramid's base is square, the intersecting plane will cut all four of the triangle faces at the same distance from the peak, giving the pyramid a square shape.

Learn more about right angle triangles here:

brainly.com/question/3770177

#SPJ1

Vertex: The vertex of the function is at the point (-2, 3).

The domain of a function is the set of all possible input values (often represented as x) for which the function is defined. In other words, it is the set of all values that can be plugged into a function to get a valid output. The domain can be limited by various factors such as the type of function, restrictions on the input values, or limitations of the real-world scenario being modeled.

The range of a function refers to the set of all possible output values (also known as the dependent variable) that the function can produce for each input value (also known as the independent variable) in its domain. In other words, the range is the set of all values that the function can "reach" or "map to" in its output.

In the given question,

Domain: The domain of the function is all real numbers greater than or equal to -2, since the square root of a negative number is not defined in the real number system.

Range: The range of the function is all real numbers less than or equal to 3, since the maximum value of the function occurs at x=-2, where f(x)=3.

Vertex: The vertex of the function is at the point (-2, 3).

Four additional points:When x=-1, f(x)=-(√(-1)+2)+3 = -1, so (-1,-1) is a point on the graph.

When x=0, f(x)=-(√0+2)+3 = 1, so (0,1) is a point on the graph.

When x=1, f(x)=-(√1+2)+3 = 2, so (1,2) is a point on the graph.

When x=4, f(x)=-(√4+2)+3 = -1, so (4,-1) is a point on the graph

To know more about Graphs, visit:

https://brainly.com/question/17267403

#SPJ1

Answer:

10 units

Step-by-step explanation:

Here, legs = base and perpendiculars.

So, Clearly given Base = 6 units Perpendicular = 8 cm

Square's Side = Hypotenuse.

By Pythagoras theorem,

H² = B²+P²

H ² = 6²+8²

H² = 36+64 = (10)²

H = 10 units.

Square's Side length = 10 units

The volume of the rectangular prism with the same dimensions as the rectangular pyramid is 300 cubic centimeters.

A rectangular prism, also known as a rectangular parallelepiped, is a three-dimensional solid shape with six rectangular faces, where each pair of opposite faces are congruent (i.e., have the same dimensions) and parallel to each other.

The rectangular prism is defined by three dimensions: length, width, and height. The length is the longest dimension of the prism, the width is the second-longest dimension, and the height is the shortest dimension, perpendicular to both length and width. The volume of a rectangular prism is given by the formula: V = l * w * h.

In the given question,

Let's assume that the rectangular pyramid has a rectangular base with length l, width w, and height h. The formula for the volume of a rectangular pyramid is given by:

V_pyramid = (1/3) * base_area * height

where base_area = l * w is the area of the rectangular base of the pyramid.

We know that the volume of the rectangular pyramid is 100 cm^3, so we can write: 100 = (1/3) * l * w * h

Simplifying this equation, we get:

l * w * h = 300

Now, let's find the volume of the rectangular prism with the same dimensions. The formula for the volume of a rectangular prism is given by: V_prism = base_area * height

where base_area = l * w is the area of the rectangular base of the prism.

Since the rectangular prism has the same dimensions as the rectangular base of the pyramid, its volume is given by: V_prism = l * w * h

Substituting the value of l * w * h from the equation we derived earlier, we get: V_prism = 300

Therefore, the volume of the rectangular prism with the same dimensions as the rectangular pyramid is 300 cubic centimeters.

To know more about rectangular pyramid, visit:

https://brainly.com/question/21416050

#SPJ1

Answer:

its 126 and 54 hope this helps