Answer:
What pair???
Explanation:
Answer:
C is the pair that represent the isotopes of x
what is the y and x axis?
Answer:
x is horizontal
y is vertical
Explanation:
Why do positive ions have a positive charge?
Answer:
Ions form when atoms gain or lose electrons. Since electrons are negatively charged, an atom that loses one or more electrons will become positively charged; an atom that gains one or more electrons becomes negatively charged. Ionic bonding is the attraction between positively- and negatively-charged ions.
Worth 20 points will mark you brainliest!
What is the percent composition of Phosphorus in Li3PO3
Answer:
you will get 17.983 g of lithium for every 100 g of lithium phosphate.
Explanation:
69.7% is the percent by mass of Lithium in Li[tex]_3[/tex]PO[tex]_3[/tex]. A percent is obtained by multiplying the result by 100.
One approach to show the concentration for an element within a compound or component in a combination is as a mass percentage. The mass percentage is computed by dividing the total weight of the combination by the mass of each component and multiplying the result by 100%. The mass percent is calculated by dividing the mass that contains the compound and solute by the mass for the element or solute.
99.795g/mol = molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex]
6.94g/mol = molar mass of Li
mass percentage of Li=(molar mass of Li/molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex])× 100
=(6.94/99.7)× 100
=69.7%
To know more about mass percentage, here:
brainly.com/question/32197511
#SPJ6
Which term is defined as the region in an atom where an electron is most likely to be
located?
1.
nucleus
2.
orbital
3.
quanta
4.
spectra
Answer:
"2.Orbital." I think
Explanation:
Risk*
3. When substances cross cell membranes by simple diffusion, they
a. squeeze between phospholipid molecules.
b. have help from channel proteins.
C. move from a higher to lower concentration.
d. two of the above
Answer:B
Explanation:due to osmosis and osmoregulation of the cell membrane
Need an answer asap plzzzzzzzzzzzzzzzzzzz!
List 3 particles of an atom (w/their symbol & charge)
Answer:
there are three fundamental particles of atom
which are :
proton ( positively charged (+) )electron ( negatively charged ( - ) )neutron ( having no charge on it ( neutral ))Particle Symbol
electron =》e-
proton =》p+
neutron =》n°
1. __N2 + __H2-> __NH3
2. __Fe + __HCl-> __H2 + __FeCl3
Answer:
N2+ 3H2－> 2NH3
2Fe + 6HCl －> 3H2 + 2FeCl3
Describe the subatomic particles found in an atom, and
describe each one. Also, describe how they relate to each
other.
pls helpp <3
When 3243. grams of iron (III) chloride are reacted with 511.8 grams of hydrosulfuric acid, which is the limiting reactant?
2 FeCl3 + 3 H2S -----> Fe2S3 + 6 HCl
Answer:
Hydrosulfuric acid will act as limiting reactant.
Explanation:
Given data:
Mass of iron(III) chloride = 3243.0 g
Mass of hydrosulfuric acid = 511.8 g
Limiting reactant = ?
Solution:
Chemical equation:
2FeCl₃ + 3H₂S → Fe₂S₃ + 6HCl
Number of moles of iron(III) chloride:
Number of moles = mass/molar mass
Number of moles = 3243.0 g/ 162.2 g/mol
Number of moles = 20 mol
Number of moles of hydrosulfuric acid:
Number of moles = mass/molar mass
Number of moles = 511.8 g/ 34.1 g/mol
Number of moles = 15 mol
Now we will compare the moles of both reactant with products
FeCl₃ : Fe₂S₃
2 : 1
20 : 1/2 ×20 = 10
FeCl₃ : HCl
2 : 6
20 : 6/2 ×20 = 60
H₂S : Fe₂S₃
3 : 1
15 : 1/3 ×15 = 5
H₂S : HCl
3 : 6
15 : 6/3 ×15 = 30
Hydrosulfuric acid producing less number of moles of product thus, it will act as limiting reactant.
Clouds, precipitation, and _____ occur at frontal boundaries
Answer:
Hi! I think it's storms.
Answer:
I think evaporation
Explanation:
because clouds and precipitation are listed i am not entirely sure if I were u i would double check
A word equation is commonly used for describing a:
a. Property of a compound
b. Property of an element
c. Chemical reaction
the answer is B because I jus did that
I need help really bad with this!!!
For the following:
Highlight each subscript in RED.
Highlight each coefficient in BLUE.
H2O 5Cl2 2Mg 3H2O2
For the following
List the chemical symbols of each element.
Give the number of atoms of each element.
HCl CO2 Na2SO4
Balance the following chemical equations.
1. Cu2O + C → Cu + CO2
2. H2O2 → H2O + O2
Al + Fe3N2 → AlN + Fe
4. Ag2S → Ag + S8
5. ZnS + AlP → Zn3P2 + Al2S3
6. Fe(OH)3 → Fe2O3 + H2O
Given the two chemical equations, highlight in RED the one that is balanced.
7. a. 2Na + Cl2 → 2NaCl
b. 2Na + 2Cl2 → 2NaCl
8. a. C3H8 + 5O2 → 3CO2 + 4H2O b. 2C3H8 + 5O2 → 3CO2 + 8H2O
9. a. 2NH3 + 5O2 → 2NO + 3H2O b. 4NH3 + 5O2 → 4NO + 6H2O
10. a. Y(NO3)2 + GaPO4 → YPO4 + Ga(NO3)2
b. 2Y(NO3)2 + 2GaPO4 → 2YPO4 + Ga(NO3)2
Answer:
Did u get the answers
Explanation:
If a sample of nitroglycerin containing 2 mL (density = 1.592g/mL) is detonated, how many total moles of gas are produced? If each mole of gas occupies 55L under the conditions of the explosion, how many liters of gas are produced? How many grams of nitrogen gas are specifically produced?
Total moles of gas = 0.1225
Volume of gas produced : 6.7375 L
mass of Nitrogen : 0.588 g
Further explanationGiven
2 ml of Nitroglycerin(ρ=1.592 g/ml)
Required
Total moles of gas
Solution
Nitroglycerin detonated ⇒ decomposition reaction
4C₃H₅N₃O₉(s)⇒ 6N₂(g)+12CO(g)+10H₂O(g)+7O₂(g)
mass of Nitroglycerin :
[tex]\tt mass=2~ml\times 1.592~g/ml=3.184~g[/tex]
moles of Nitroglycerin :
[tex]\tt moles=\dfrac{3.184}{227,0865~g/mol}=0.014[/tex]
Total moles of gas:
[tex]\tt \dfrac{6+12+10+7}{4}\times 0.014=0.1225[/tex]
Volume of gas produced :
[tex]\tt 0.1225\times 55=6.7375~L[/tex]
moles of Nitrogen :
[tex]\tt \dfrac{6}{4}\times 0.014=0.021[/tex]
mass of Nitrogen :
[tex]\tt 0.021\times 28=0.588~g[/tex]
Match the term with its description.
Match Term Definition
Chloroplast A) A green pigment present in all plants that absorbs light to provide energy for photosynthesis
Chlorophyll B) An organelle that contains chlorophyll and in which photosynthesis takes place
Energy C) A capacity to do work that can produce physical changes within living and nonliving systems
Glucose D) A type of sugar that is produced during photosynthesis to store chemical energy
Answer:
Chloroplast: An organelle that contains chlorophyll and in which photosynthesis takes place
Chlorophyll: A green pigment present in all plants that absorbs light to provide energy for photosynthesis
Energy: A capacity to do work that can produce physical changes within living and nonliving systems
Glucose:A type of sugar that is produced during photosynthesis to store chemical energy
hope it helps!
Answer: look at picture for the answer, and I showed that I got it right as well. It was worth 4 points and I got all 4. Brainiest please, if you don't mind <3
Explain five physical and/or chemical properties that you need to consider for the substances before using them as construction materials for buildings
Answer: There are many properties of a metal which is taken into consideration when it is used for construction
Explanation:
The properties can be physical, chemical, et cetera. The physical properties that is considered are:
1. Durability: It can be defined as the property of the material to withstand the atmospheric pressure and other factors.
2. Density: The ratio of mass by volume of a material (homogeneous material) is called as density.
3. Fire resistance: The ability of the material to withstand in fire without changing its size or shape.
4. Weather resistance: The ability of the material to withstand the weather which could be variable round the year.
5.Water absorption: The ability of the material to absorb water and retain it.
Please actually help me.
Thank you!
Answer: I believe -3
Explanation:
PLZ HELP!
How do you think changing the angle of a ramp will affect work done?
Answer: The steepness of a ramp affects it by making it easier or harder.
Explanation: It's a bit situational. If you were going up a steep ramp with a heavy load, it will increase the work necessary, whereas if you were going down a ramp, it would decrease the work necessary. If you need this simply put, think about biking up and down a hill. It would be easier going down than up.
Which characteristic do euglenoids and algae share?
Both are fungus-like protists.
Both can be autotrophic.
Both have whip-like tails.
Both are decomposers.
To solve this we must be knowing each and every concept related to autotroph. Therefore, eugenides and algae, both can be autotrophic. The correct option is option B.
What is autotroph?An creature that can make its own sustenance out of inorganic materials is known as an autotroph. Contrarily, heterotrophs are species that can't make their own nutrition and must eat other organisms in order to survive.
In contrast to autotrophs, heterotrophs are unable to manufacture their own nourishment. Heterotrophs need to consume organic material in order to produce the nutrients needed for life, not inorganic. Eugenides and algae, both can be autotrophic.
Therefore, Eugenides and algae, both can be autotrophic. The correct option is option B among all the given options.
To know more about autotroph, here:
https://brainly.com/question/15458607
#SPJ6
If you discover a new element, how would you know where it should go on the periodic table
Answer:
the atomic number
Explanation:
it would be in the upper corner
Tritium (H-3) is a radioactive isotope of hydrogen with a half-life of 12.3 years. How long would it take for a 40.0g sample to decay down to 1.25g
Answer:
the answer maybe is 61.5 years (please check with others) tq
Explanation:
40/2=20
20/2=10
10/2=5
5/2=2.5
2.5/2=1.25
so one half life is 12.3 years
then 12.3 ×5 =61 .5
(why 5 ? because it decay 5 times to get 1.25 from 20)
Describe what the greenhouse effect is and how it is caused on a molecular level.
The greenhouse effect can be cause as the process by which the temperature of the surface of the earth increases because of the earth's atmosphere. On the molecular level, greenhouse effect will be caused by the molecules of the some chemicals, called as the greenhouse gases.
When the some of the infrared radiation coming from the Sun and passes through the atmosphere, but the most of it absorbed and it will re-emitted in all the directions by the greenhouse gas molecules and the clouds. This effect is to warm the Earth's surface and will the lower atmosphere.
As the infrared radiation and the heat will be trapped and the recycled in between the atmosphere and the planet, it will generates the heat cycle.
To learn more about greenhouse effect here
https://brainly.com/question/13706708
#SPJ1
A gas occupies 1.00cm^3 at STP. What volume does it occupy at 710.0 mm Hg and 55.0°C
Answer:
Final volume is 1.29cm³
Explanation:
Using combined gas law:
P₁V₁/T₁ = P₂V₂/T₂
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of a gas.
We can solve the volume of the gas:
P₁ = 1atm at STP
V₁ = 1cm³
T₁ = 273.15K at STP
P₂ = 710mmHg * (1atm / 760mmHg) = 0.9342atm
V₂ = ?
T₂ = 55.0°C + 273.15K = 328.15K
Replacing:
1atm*1cm³/273.15K = 0.9342atm*V₂/328.15K
1.29cm³ = V₂
Final volume is 1.29cm³
Explain, in terms of energy changes, why methane is used as a fuel.
List four greenhouse gases in the atmosphere. For each gas, describe its prevalence in the atmosphere, its natural sources, its human-induced sources, and how its concentration in the atmosphere might be changing.
Answer: Carbon Dioxide, Methane, Nitrous Oxide and Fuorinated Gases
Explanation:Carbon dioxide (CO2): Carbon dioxide enters the atmosphere through burning fossil fuels (coal, natural gas, and oil), solid waste, trees and other biological materials, and also as a result of certain chemical reactions (e.g., manufacture of cement). Carbon dioxide is removed from the atmosphere (or "sequestered") when it is absorbed by plants as part of the biological carbon cycle.
Methane (CH4): Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices and by the decay of organic waste in municipal solid waste landfills.
Nitrous oxide (N2O): Nitrous oxide is emitted during agricultural and industrial activities, combustion of fossil fuels and solid waste, as well as during treatment of wastewater.
Fluorinated gases: Hydrofluorocarbons, perfluorocarbons, sulfur hexafluoride, and nitrogen trifluoride are synthetic, powerful greenhouse gases that are emitted from a variety of industrial processes. Fluorinated gases are sometimes used as substitutes for stratospheric ozone-depleting substances (e.g., chlorofluorocarbons, hydrochlorofluorocarbons, and halons). These gases are typically emitted in smaller quantities, but because they are potent greenhouse gases, they are sometimes referred to as High Global Warming Potential gases ("High GWP gases").
Read the reaction and the statement.
2X(g) + Y2(g) ⇌ 2XY(s)
The equilibrium constant for the chemical reaction is found to be 20 at 150 K.
If the concentration of X is 4.0 × 10-2 M, what is the concentration of the Y2 gas?
5.50 M
8.0 M
31.25 M
40.0 M
Answer:
[Y₂] = 31.25M
Explanation:
Based on the chemical reaction:
2X(g) + Y2(g) ⇌ 2XY(s)
We must define the equilibrium constant, K as:
K = 20 = 1 / [X]²[Y₂]
Where [X] and [Y₂] are the equilibrium concentrations of each gas.
If [X] = 4.0x10⁻²M:
20 = 1 / [4.0x10⁻²M]²[Y₂]
0.032 = 1 / [Y₂]
[Y₂] = 31.25Mhow many atoms are in 1.50 moles of He?
Moraines left by glaciers are different from deposits left by rivers because the rocks left behind are _____.
Explanation:
unorganized and unsorted i think this is the answer
How is carbon(C)-14 is different from carbon(C)-12?
Explanation:
Carbon-12 and carbon-14 are two isotopes of the element carbon. The difference between carbon-12 and carbon-14 is the number of neutrons in each of their atoms. Atoms of both isotopes of carbon contain 6 protons. Atoms of carbon-12 have 6 neutrons, while atoms of carbon-14 contain 8 neutrons.
