If you are holding a bucket steady by a rope with a tension force of 20 N, how much does the bucket weigh?

The velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.

To find the velocity of the water where the pipe is narrow, you can use the formula for the mass flow rate, which is given by:

Mass flow rate = Density * Flow rate

= Density * (Area * Velocity)

Where:

Density is the density of the fluid

Flow rate is the volume flow rate, or the rate at which volume flows through the pipe

Area is the cross-sectional area of the pipe

Velocity is the velocity of the fluid

The mass flow rate is constant, so you can set the mass flow rate on either side of the constriction equal to each other and solve for the velocity on the other side.

The cross-sectional area of the pipe on the narrow side is given by the formula for the area of a circle:

A = pi * r^2

Where:

A is the cross-sectional area of the pipe

r is the radius of the pipe

The radius of the pipe on the narrow side is 3 cm / 2 = 1.5 cm. Plugging this value into the formula for the cross-sectional area, you get:

A = pi * (1.5 cm)^2

= 7.07 cm^2

The cross-sectional area of the pipe on the wide side is given by the same formula, with a radius of 6 cm / 2 = 3 cm:

A = pi * (3 cm)^2

= 28.27 cm^2

Since the mass flow rate is constant, you can set the mass flow rates on either side of the constriction equal to each other and solve for the velocity on the other side:

(Density * 7.07 cm^2 * v) = (Density * 28.27 cm^2 * 8 m/s)

Solving for v, the velocity on the narrow side, you get:

v = (Density * 28.27 cm^2 * 8 m/s) / (Density * 7.07 cm^2)

= 11.6 m/s

The final value for the velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.

To learn more about mass flow rate refer :

https://brainly.com/question/13289839

#SPJ4

During a game of bowling the ball's motion:

The correct options are A,B and E.

Bowling ball motion is commonly divided into sequential skid, hook, and roll phases. When the ball moves down the lane in the skid and hook phases, frictional contact with the lane causes the ball's forward (translational) speed to continually decrease, but to continually increase its revolution rate (rotational speed).

Learn more about bowling on

https://brainly.com/question/14775747

#SPJ1

Answer:

5 m

Explanation:

Displacement is the straight-line distance from the starting point to the end point.  Student ends up 4m north and 3m west from where he started. Use pythagorean theorem to solve for displacement (d).  

d² = 3² + 4² = 25

d = [tex]\sqrt{25}[/tex] = 5 m

Or, if you remember from geometry, a right triangle with legs of 3 and 4 has a hypotenuse of 5 (3-4-5 right triangle)

The dependent variable go on the Y-axis on a graph.

The dependent variable is described as the variable that is being measured or tested in an experiment.

Dependent variable can be explained using the example where a test score could be a dependent variable because it could change depending on several factors such as how much you studied, how much sleep you got the night before you took the test, or even how hungry you were when you took it.

The independent variable is found on the x-axis (horizontal line) of the graph and the dependent variable is displayed on the y-axis.

The difference between independent variable and the dependent variable is that in an experiment, the independent variable is the variable that is varied or manipulated by the researcher.

Learn more about  dependent variable at:

https://brainly.com/question/1670595

#SPJ1

So let's talk about billiard balls and the law of conservation of momentum. For the purposes of this simplified discussion, momentum is always conserved for collisions between balls.

To learn more about velocity refer to:

https://brainly.com/question/25749514

#SPJ4

An energy eigenstate can always be written as (x,t) = (x)e-iEt/1. Probability density is equal to |(x,t)|2 (x,t) (x)e-iEt/1 * (x,t) ψ*(x)e+iEt/1 = ψ (x) The wave function *(x) = |(x)|2 exhibits time-dependent phase.

For the system of a particle or particles interacting with a set of constraints, V(x) is a potential energy function. These restrictions can be compared to fields that exert a force on the desired particle or particles.

The term "energy eigenvalues," which comes from the German word eigen, which means "characteristic" or "unique," refers to such particular discontinuous (step-like) energies. We refer to these energies as discrete energy eigenvalues or as quantized energies.

Learn more about energy here:

https://brainly.com/question/17858145

#SPJ4

The energy levels and the corresponding eigenstates of a particle of mass m subject to a potential energy v(x) g can be determined by solving the time-independent Schrodinger equation.

What is potential energy?

Potential energy is energy that is stored and can be released in the future. It is the energy of position or condition, as opposed to kinetic energy which is energy in motion. Potential energy can be stored in many forms such as gravitational, chemical, elastic, nuclear, and electromagnetic. Gravitational potential energy is the energy stored in an object due to its position in a gravitational field, while chemical potential energy is the energy stored in the bonds of chemical compounds. Elastic potential energy is energy stored in objects that can be stretched or compressed, such as a spring, while nuclear potential energy is the energy stored in the nucleus of an atom. Electromagnetic potential energy is the energy stored in the electric and magnetic fields of an object.

The energy levels and the corresponding eigenstates of a particle of mass m subject to a potential energy v(x) g can be determined by solving the time-independent Schrodinger equation:
Hψ = Eψ
Where H is the Hamiltonian operator, ψ is the wavefunction, and E is the energy. For a particle of mass m subject to a potential energy v(x) g, the Hamiltonian can be written as:
H = -(h2/2m)*d2/dx2 + v(x) g
The solution of the Schrodinger equation for this Hamiltonian yields the energy levels E and the corresponding wavefunctions ψ. The energy levels are determined by solving the equation:
E - v(x) g = 0
This equation can be solved for the different energy levels E, and the corresponding wavefunctions can then be determined by solving the Schrodinger equation. The wavefunctions represent the probability distribution of the particle, and are determined by the boundary conditions imposed by the potential energy.
In summary, the energy levels and the corresponding eigenstates of a particle of mass m subject to a potential energy v(x) g can be determined by solving the time-independent Schrodinger equation. The energy levels are found by solving the equation E - v(x) g = 0, and the corresponding wavefunctions are found by solving the Schrodinger equation.

To learn more about potential energy
https://brainly.com/question/15896499
#SPJ4

The volume of the toy is 80 ml.

To find the volume of the plastic toy, Maher can use the principle of buoyancy. When an object is placed in a fluid, it will displace an amount of fluid equal to its own volume. The volume of the displaced fluid can be measured and used to calculate the volume of the object.

In this case, Maher has placed the toy in a graduated cylinder filled with water, and he has observed that the water level increased from 70 ml to 150 ml. This means that the toy displaced 150 - 70 = 80 ml of water.

The volume of the toy is equal to the volume of the displaced water, so the toy's volume is 80 ml. This is the volume of the toy when it is completely submerged in water.

It's important to note that the volume of an object can change depending on its temperature, pressure, and other factors. To get an accurate measurement of the volume of the toy, Maher should make sure to measure the volume of the displaced water carefully and under controlled conditions.

Answer:

Volume of the toy: [tex]80\; {\rm mL}[/tex].

Average density of the toy: [tex]2\; {\rm g\cdot mL^{-1}}[/tex] (or equivalently, [tex]2\; {\rm g \cdot cm^{-3}}[/tex].)

Explanation:

The graduated cylinder initially measures the volume of water in this cylinder:

[tex]V(\text{water}) = 70\; {\rm mL}[/tex].

Assume that the toy is submerged in the water. The graduated cylinder would then measure the volume of the water and the toy, combined:

[tex]V(\text{water}) + V(\text{toy}) = 150\; {\rm mL}[/tex].

Rearrange to find the volume of the toy:

[tex]\begin{aligned}V(\text{toy}) &= 150\; {\rm mL} - V(\text{water}) \\ &= 150\; {\rm mL} - 70\; {\rm mL} \\ &= 80\; {\rm mL}\end{aligned}[/tex].

To find the average density of this toy, divide mass by volume:

[tex]\begin{aligned}(\text{average density}) &= \frac{(\text{mass})}{(\text{volume})} \\ &= \frac{160\; {\rm g}}{80\; {\rm mL}} \\ &= 2\; {\rm g\cdot mL^{-1}}\end{aligned}[/tex].

Processor-A uses 20 W of power components and 80 W cpu dynamic power 3 GHz.

When there is no design activity occurring, static power—also known as "leakage"—is used up. It closely relates to the transistor's idle current, which is based on the transistor's characteristics.

While leakage, or the current that passes through a transistor while there is no activity, makes up static power, switching or short-circuit power are components of dynamic power. Any of the following things may influence each power component's value: Activity. Frequency.

To know more about  static power visit:

https://brainly.com/question/26609519

#SPJ4

Refer to the photo taken.

The relation between the time-period of the transverse wave for the third harmonic and the time between the maximum displacement and minimum displacement is [tex]=16.3 \mathrm{~g}[/tex]

[tex]$$T_3=2 t$$Substitute$8.40 \mathrm{~ms}$[/tex]

for t in the above expression.

[tex]$$T_3=2(8.4 \mathrm{~ms})\left(\frac{10^{-3} \mathrm{~s}}{1 \mathrm{~ms}}\right)$$[/tex]

The wave velocity can be given by the following expression [tex]=0.0168 \mathrm{~s}[/tex]

[tex]v=\frac{\lambda_3}{T_3}[/tex]

Here,

[tex]$$\lambda_3$$[/tex]

is the frequency of third harmonics and

[tex]$$T_3$$[/tex]

is the time-period of third harmonics.

Substitute [tex]$0.1296 \mathrm{~m}$[/tex] for

[tex]$$\lambda_3$$[/tex]

and

[tex]$0.0168 \mathrm{~s}$ for$T_3$[/tex]

[tex]\begin{aligned}& v=\frac{0.1296 \mathrm{~m}}{0.0168 \mathrm{~m}} \\& =7.714 \mathrm{~m} / \mathrm{s}\end{aligned}[/tex]

The expression of the wave velocity is given by the following expression.

[tex]v=\sqrt{\frac{T}{m / L}}[/tex]

Rearrange the above expression for

[tex]$$m$$[/tex]

[tex]\text { Substitute } 5.00 \mathrm{~N} \text { for } T, 0.1944 \mathrm{~m} \text { for } L \text {, and } 7.714 \mathrm{~m} / \mathrm{s} \text { for } v \text { in the above expression. }[/tex]

[tex]\begin{gathered}m=\frac{(5.00 \mathrm{~N})(0.1944 \mathrm{~m})}{(7.714 \mathrm{~m} / \mathrm{s})^2} \\=(0.0163345 \mathrm{~kg})\left(\frac{1000 \mathrm{~g}}{1 \mathrm{~kg}}\right) \\=16.3 \mathrm{~g}\end{gathered}[/tex]

The anti-nodes in the standing waves are at a distance half a wavelength. The time-period is twice the time from maximum displacement to minimum displacement of the anti-node.

To learn more about displacement visit

https://brainly.com/question/11934397

#SPJ4

Answer:

S = V1 t + 1/2 a t^2        distance traveled for linear acceleration

θ = ω1 t + 1/2 α t^2       equivalent angle for rotational acceleration

ω1 = 240 / min * 2 π * 240 / (60 s/min) = 8 π / s

ω2 = 360 rpm = 12 π / s

α = 4 π/ 6.5 s^2  = .62 π / s^2    angular acceleration

θ = 8 π / s  6.5 s + .62 π / 2 * 6.5^2

θ = 52 π + 13 π = 65 π = 65 * π / (2 π / rev) = 32.5 rev

1 rev = 2 * π * R = 2 * π * .4 m = 2.51 m / rev

S = 32.5 rev * 2.5 m/rev =  81 m

To keep the car from slipping, the road and tires need to have a minimum coefficient of friction of 0.188.

The things creating friction will determine the coefficient of friction. The value is often between 0 and 1, but it can also be higher. A number of 0 indicates that there is absolutely no friction between the items; superfluidity makes this feasible. Yes. Because the adhesive forces between molecules are stronger when the contact surface is substantially polished, frictional force increases. In this situation, the friction coefficient will be higher than one.

Here m= 1402 kg

r=53

v= 9.9 m/s

g=9.8

coefficient = (v^2) / rg

coefficient = (9.9^2) / (53*9.8)

coefficient = 98.01/519.4

coefficient = 0.188

Learn more about friction Visit : brainly.com/question/24338873

#SPJ4

sheesh sheesh                                                    

Explanation:

Answer:

(A)   9.2 Newtons

(B)   200.8 Newtons

Explanation:

Attached is the free body diagram I drew along with some of the work/formulas I used. Please ask me any questions you have in the comments about my diagram/work. I'd be happy to walk you through it.

Answer:

None of the choices you provided are correct. When a gas burns, it releases energy in the form of heat and light. Some of this energy is transferred to the pot of water, increasing its temperature, but some of the energy is also released as light. However, the rest of the energy is not transformed into chemical, electrical, or nuclear energy. Instead, it is lost to the environment in the form of waste heat. This is why gas stoves can become hot to the touch - they are releasing excess energy in the form of heat that is not being used to heat the pot of water.

Explanation:

The resultant of the force that acts in opposite directions is 7 N.

We know that the resultant force is the force that has the same effect in magnitude and direction as two or more forces that is acting together. We have to note that the force that is actinmg on an object is a vector quantity. The implication of this is that the magnitude and the direction of the forces that are acting on the body is very important.

By the use of the law of vectors we can be able to write in the case of the question that we have here, we can see that the forces are acting in the opposite directions. The implication of this is that we would have to subtract the forces so as obtain the resultant force.

We have to note that when we have opposite forces, one is said to be positive and the other negative and the resultant force can be found by subtraction. As such the resultant force can be obtained from;

Let the +B force be 12 N

Let the -B force be 5N

12 N - 5 N = 7 N

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

Tension of the three cables connecting the  celling, 7 kg ball, 4 kg ball,  5 kg ball respectively 156.8 N,  88.2 N and 49 N.

The force communicated through a rope, string, or wire when two opposing forces draw on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire.

Tension of the cable connecting the  celling and 7 kg ball:

= (7 kg + 4 kg + 5Kg) × 9.8 m/s²

= 156.8 N.

Tension of the cable connecting the  7kg ball and 4 kg ball:

= (4 kg + 5Kg) × 9.8 m/s²

= 88.2 N.

Tension of the cable connecting the  4kg ball and 5 kg ball:

= 5Kg× 9.8 m/s²

= 49 N.

Learn more about tension here:

https://brainly.com/question/29124835

#SPJ1

Answer:

The answer is D. moving at a constant rate.
Explanation:
I've had this question before.

In the position-time graph, the horizontal line segment indicates that the object is not moving and is at rest. Therefore, option (B) is correct.

The position vs time graph on which the instantaneous position of a particle is plotted on the y-axis and the time is plotted on the x-axis is called the Position-Time graph.

In the position vs time graph always take an independent variable on the x-axis and dependent variables must be plotted on the y-axis. Through mathematical function, the dependent variable will be dependent on the independent variable.

In the case of the Kinematic equation of uniform acceleration, the position can be defined as a dependent variable and time will be the fundamental independent variable.

The case of the horizontal line in the position vs. time graph indicates that the position of the object is not changing with time so it is at rest.

Learn more about position vs. time graph, here:

https://brainly.com/question/11290682

#SPJ2

The new gravitational force between the object will be 1/20.25 times of the original force.

The gravitational force between any two object is defined as the product of the masses of the object and it is inversely proportional to the square of the distance between them which is given by,

F = GMm/R²

Here,

G is the universal gravitational constant, M and m are the mass of the body and R is the distance between them.

As per the given question the distance between the object is increased 4.5 times the original separation.

R' = 4.5R.

The new force of attraction between the object will be,

F' = GMm/(R')²

F' = GMm/(4.5R)²

F' = GMm/20.25R²

F' = F/20.25

So, the new force of attraction between the two objects will become 1/20.25 times of original force.

To know more about gravitational force , visit,

https://brainly.com/question/24783651

#SPJ4

Explanation:

If you dropped particles of different shapes from a boat into still water, they would fall straight down due to the force of gravity. The speed at which they fall would depend on their mass and the shape of the particles could affect how they move through the water, but ultimately they would all sink to the bottom of the water body. If the particles are buoyant, they may float instead of sinking.

We may be aware that, for example, a car leaving a stop sign would move farther in a given amount of time the faster it accelerates.

acceleration is the rate of change in both speed of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. So because direction is always shifting, motion on a circle accelerates even while the speed is constant.

An object's velocity is altered by a net force, and acceleration increases with net force. To accelerate at the same rate as less massive objects, more massive objects need greater net forces.

To know more about acceleration visit:

https://brainly.com/question/2303856

#SPJ1

The work done by the dog is 0.81J.

Work done is a measure of energy expended in moving an object; most commonly calculated by multiplying the force by the distance.

It is said that no work is done if the object does not move.

The work done on an object is the amount of energy transferred to an object through work.

According to this question, a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. The force applied to break the bone must be calculated first as follows:

Force = mass × acceleration

Force = 0.75kg × 9.8m/s²

Force = 7.35N

Work done = 7.35N × 0.11m = 0.81J

Therefore, 0.81J is the work done by the dog.

Learn more about work done at: https://brainly.com/question/2750803

#SPJ1

The speed of the person as she enters the water is 14.2 m/s.

Kinetic energy is the energy of motion. It is the energy that an object has due to its motion. This energy can be transferred from one object to another or converted into other forms of energy. Kinetic energy is dependent on an object's mass and its velocity. The greater an object's mass or velocity, the more kinetic energy it has. Kinetic energy can be used to do work, such as powering a machine or vehicle. It can also be used to generate electricity or to heat up objects.

The speed of the person as she enters the water can be calculated using the equation for kinetic energy:
KE = ½mv²
Where m is the mass of the person (65 kg) and v is the speed.
Solving for v, we get:
v = √(2KE/m)
Since the potential energy of the person just before she enters the water is equal to the kinetic energy of the person just after she enters the water, we can calculate the kinetic energy as:
PE = mgh
KE = mgh
Where m is the mass of the person (65 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height of the platform (10 m).
Plugging this into the equation for v, we get:
v = √(2mgh/m)
v = √(2gh)
v = √(2*9.8*10)
v = 14.2 m/s

To learn more about kinetic energy
https://brainly.com/question/114210
#SPJ4

The magnitude of Ernie's resultant velocity is    [tex]V=8.72m/s[/tex].

Velocity:

Velocity is the direction in which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time. In kinematics, the area of classical mechanics that deals with the motion of bodies, velocity is a fundamental idea.

Given,

Ernie's swimming rate with respect to the river   [tex]V_{ER} =6.2 m/s[/tex]

River's current rate [tex]V_{R}=10.7 m/s[/tex]

Hence,

         The magnitude of Ernie's resultant velocity

                                               [tex]V[/tex] = [tex]V_{R} -V_{ER}=10.7i - 6.2j[/tex]

                                              [tex]V=\sqrt{(10.7)^{2}-(6.2)^{2} }[/tex]

                                              [tex]V=8.72m/s[/tex]

Hence,

           The magnitude of Ernie's resultant velocity is  [tex]V=8.72m/s[/tex].

Learn more about Velocity here

https://brainly.com/question/25749514

#SPJ4

If the cart moves in 3.2 seconds from rest, then the distance traveled by cart is 2 meters.

How do you define distance? Regardless of direction, distance measures an object's overall movement. Distance is defined as the amount of ground covered by an object, regardless of its starting or stopping position.

Horizontal force acting on the cart, F = 11 N

Mass of the cart, m = 35 kg

To find,

Distance covered by the cart in 3.5 seconds if it starts from rest.

Solution,

Let x is the distance moved by the cart. It can be calculated using the second equation of motion as :

s = 1.925 meters

In terms of "how much land an object is covered" while traveling, distance—a scalar quantity—describes this. Displacement is a vector number that expresses the overall change in the object's location, and it is related to the phrase "how far from place the thing is."

To know more about distance  visit:

https://brainly.com/question/15172156

#SPJ4

The speed at the level of the lowest position is 5.01m/s.

Energy cannot be created or destroyed; it can only be changed from one form of energy to another, according to the law of conservation of energy. This implies that a system always has the same amount of energy, barring external energy addition.

To reduce expenses and protect the resources for future use, energy conservation is necessary. The environment is contaminated by the harmful gases released into the atmosphere by conventional energy sources. Traditional energy sources are finite and could run out one day.

This is a typical energy conservation question, Set the kinetic energy at the bottom and the potential energy at the height to be equal.

mgh = 1/2mv²

gh = v²/2

v = √2gh

v = √2×9.8×1.28m/s

v = 5.01m/s.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ4

Answer: Synthesis

Explanation: You are combining multiple Elements

The force due to gravity will be 0.0272 Newtons.

The force between two mass-containing objects that are drawn toward one another is referred to as the gravitational pull. There is gravity everywhere around us. For instance, it maintains the planets in our solar system in orbit around the Sun. Additionally, because to gravity, the Moon maintains its orbit around the Earth.

Despite being weak and appealing, gravitational forces exist.

Given, mass of one object= 2300 kg

mass of another object= 4000 kg

distance between the two objects= 0.150 m

value of G is universal, [tex]G= 6.67[/tex]×[tex]10^{-11}[/tex] [tex]N m^{2} / kg^{2}[/tex]

the equation is, [tex]F=G\frac{M1 . M2}{d^{2} }[/tex]

                       [tex]F=0.0272 N[/tex]

To know more about Gravitation visit

https://brainly.com/question/3009841

#SPJ4

The force acting on the object is 200 Newton.

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

Given that mass of the object: m = 10 kg.

acceleration of the object = 20 m/s^2.

Hence, according to Newton's 2nd law of motion:

Force = mass × acceleration

= 10 × 20 Newton

= 200 Newton.

Hence, the force on the object is 200 Newton.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

You did look at solar activity on the heliophysics event registry website, and we found activity on the sun on the specified day.

Any natural occurrence in the upper atmosphere of the sun is referred to as a solar phenomenon. Solar flares, prominences and filaments, and coronal mass ejections are three different categories of solar phenomena.

The simplest way we can investigate how solar activity changes over time is to survey sunspots, which is also how we track the solar cycle. Sunspots are associated with the Sun's natural 11-year cycle, during which the planet's surface changes from calm to turbulent.

To know more about  solar activity visit:-

https://brainly.com/question/3013261

#SPJ4