Answer:
It would take 200,000 years for a spaceship traveling at the speed of light to go across the entire galaxy.
The phrases or terms describe different fundamental processes of nucleic acids. Classify each phrase or term as relating to replication, transcription, or translation.
a. Single DNA strand used to produce mRNA
b. Requires tRNA
c. Ribosome
d. DNA polymerase
e. Both DNA strands are duplicate
f. Described as semi-conservative
g. Amino acids added to peptide chain
Answer:
I don't know what to do
Explanation:
bye
Answer:
a. Single DNA strand used to produce mRNA ⇒ Transcription
b. Requires tRNA ⇒ Translation
c. Ribosome ⇒ Translation
d. DNA polymerase ⇒ Replication
e. Both DNA strands are duplicate ⇒ Replication
f. Described as semi-conservative ⇒ Replication
g. Amino acids added to peptide chain ⇒ Translation
Explanation:
Replication: the double-strand DNA is separated into two strands. Each strand is used as a template by DNA polymerase to produce the other strand. The leading strand is read by DNA polymerase in a continuous form (3' - 5') and the lagging strand is read in a discontinuous form (5'-3'). In this way, both strands are duplicated. The process is semi-conservative because the DNA molecule produced conserves 1 original strand and the other strand is the new synthesized one. The corresponding options are: d, e, f.
Transcription: is a process in which the genetic code of DNA is copied into a molecule called messenger RNA (mRNA). The double-strand DNA is opened and one strand is read. The enzyme involved is RNA polymerase, which binds the DNA (in a sequence called promoter) and uses the nucleotide code of DNA as a template to produce a molecule of RNA (the mRNA). Therefore, the correct option for this process is a.
Translation: is the process in which the mRNA sequence (copied from a DNA molecule) is translated into an amino acid sequence to produce a protein. This process is carried out within the cell ribosome. The mRNA is read in groups of three nucleotides (a codon) that codifies amino acids. The translation between codon and amino acid is assisted by molecules called transference RNA (tRNA). As each codon is decoded, an amino acid is added and the new polypeptide sequence is synthesized. Therefore, the correct options are: b, c, g.
Increasing the temperature of a chemical reaction usually increases greatly the rate of the reaction. The most iportant reason for this is that increasing the temperature increases: _______.
A) the collision frequency
B) the probability factor
C) the fraction of collisions with energy greater than Bact
D) the energy of activation.
E) the amount of heat released in the reaction
Answer:
the fraction of collisions with energy greater than Eact
Explanation:
The activation energy of a reaction stands as a sort of energy barrier between reactants and products. It is only reactants that possesses energy greater than the activation energy that can be converted from reactants to products.
When the temperature of the system is increased, more particles acquire energy greater than the activation energy. Hence, the fraction of collisions with energy greater than the activation energy increases so the rate of reaction increases likewise.
Calculate the mass percent of carbon in the following molecule: Mn3[Mn(CO)4]3
Answer:
21.63 %
Explanation:
The molar mass of Mn₃[Mn(CO)₄]₃ is 665.64 g/mol.
Let's assume we have 1 mol of Mn₃[Mn(CO)₄]₃, if that were the case then we would have 665.64 grams.
There are 12 C moles per Mn₃[Mn(CO)₄]₃, with that in mind we calculate the weight of 12 C moles:
12 mol C * 12 g/mol = 144 gFinally we calculate the mass percent of carbon:
144 g / 665.64 g * 100% = 21.63 %why do the Philippines have generally warm temperature throughout the year?a. it is near the sun b.it has many volcanoes c. it lies near the equator d. it has many islands.what is the correct answer?
Answer:
F. When everyone is together it gets hotter
Explanation:
Answer:
c. it lies near the equator
explain why the melting point of a solid is equal to the freezing point of it's liquid.
Explanation:
Because melting point and freezing point describe the same transition of matter, in this case from liquid to solid (freezing) or equivalently, from solid to liquid (melting). It is stuck on 0 ∘C during the entire melting or freezing process. None except melting is when you heat up and freezing when you cool down.hope it helps.stay safe healthy and happy.The number of mol of oxygen in 2.5 mol of caffeine
Answer:
5.0molO
Explanation:
To find the moles of oxygen in 2.5 moles of caffeine, we will first research caffeine's molecular formula: C8H10N4O2. From the molecular formula, we can see there are 2 oxygen atoms in every 1 molecule of C8H10N4O2.We can therefore multiply by the following mole ratio to get the moles of oxygen.
2.5molC8H10N4O2×2molO/1molC8H10N4O2 = 5.0molO.
How many moles are in the number of molecules below? I only need to know the 5th question.
Answer:
11
1. 6.02×10 23
this is the answer Hope it helps you
Determine whether methylcyclohexane contains a chiral center. _____ How many different substituents do you count at atom
Answer:
methylcyclohexane does not possess a chiral center
Explanation:
A molecule is said to possess a chiral center if one or more of the atoms in the molecule is bonded to four different atoms or groups.
If we look at methylcyclohexane, none of the carbon atoms in the molecule is bonded to four different atoms or groups hence the molecule contains no chiral centers and will not exhibit optical isomerism.
So, methylcyclohexane has a plane of symmetry thus it is an achiral molecule.
Q2.Which is true about potassium?
Extremely unreactive
Not very reactive
Slightly reactive
Very reactive
When sodium chloride, NaCl , dissolves in water, the solution contains ___________________ in addition to the water solvent. The partial charges in water help dissolve the compound as the hydrogen end of water is attracted to the ____________ and the oxygen end is attracted to the _______________
Answer:
sodium ions and chloride ions
chloride ion
sodium ion
Explanation:
Ionic substances are composed of ions. When you dissolve an Ionic substance in water, the ions that compose the substance together with water molecules are present in solution.
Hence, when sodium chloride is dissolved in water, sodium ions and chloride ions are released in solution.
Water has a dipole moment. Hence, the chloride ions are attracted to hydrogen (the positive end of the dipole) while sodium ions are attracted to oxygen (the negative end of the dipole).
This is how the solid is dissolved in water.
When sodium chloride, NaCl , dissolves in water, the solution contains sodium and chloride ions in addition to the water solvent. The partial charges in water help dissolve the compound as the hydrogen end of water is attracted to the chloride ions and the oxygen end is attracted to the sodium ions.
What molecules are soluble in water?Those molecules in which positive ion as well as negative ion is present, will show solubility in water.
Sodium chloride (NaCl) is an ionic compound, which dissociates into sodium ion and chloride ion in the water. As in the water H⁺ ions are present which get attracted towards the chloride ions (Cl⁻) and hydroxide ion (OH⁻ ion) get attracted towards the sodium ions (Na⁺) and show complete dissolution.
Hence correct answers are sodium and chloride ions, chloride ion and sodium ion.
To know more about solubility in water, visit the below link:
https://brainly.com/question/16903071
Which compound contains both sigma and pi bonds... HCCl3, H2CO, H2S, or HBr?
Answer:
H2CO
Explanation:
Becuase it has 2 sigma bonds plus one pi bond and one sigma bond that consitute the double bond between C and O.
Answer:
B. H2CO
Explanation:
The following statements either define or are closely related to the terms periodic law, period, or group. Match the terms to the appropriate statements.1. This is a vertical arrangement of elements in the periodic table. 2. This is a horizontal arrangement of elements in the periodic table. 3. The properties of the elements repeat in a regular way as the atomic numbers increase. 4. Element 19 begins this arrangement in the periodic table 5. The chemical properties of elements 12, 20, and 38 demonstrate this principle.
Answer:
Please find the complete solution in attached file.
Explanation:
Periodic law is the the properties of the elements that repeat in a regular way as the atomic numbers increase.
What is periodic table?Periodic chart organized collection of all chemical elements arranged roughly according to increasing atomic weight. The periodic recurrence of several features in the elements was originally identified by Dmitry I. Mendeleyev in 1869.
1. This is a vertical arrangement of elements in the periodic table group
2. This is a horizontal arrangement of elements in the periodic table period
3. The properties of the elements repeat in a regular way as the atomic numbers increase periodic law
4. Element 19 begins this arrangement in the periodic table period
5. The chemical properties of elements 12, 20, and 38 demonstrate this principle. periodic law
Therefore, periodic law is the the properties of the elements that repeat in a regular way as the atomic numbers increase.
To learn more about periodic table, here:
https://brainly.com/question/29766008
#SPJ6
Calculate the moles of H3PO4 that reacted (8). Consult the coefficients in the balance chemical reaction to obtain the mole ratio. Show your calculation here.
Answer:
The number of moles of H₃PO₄ that reacted is 0.000343 moles
Note: Some data is missing. Data from the attachment is used for the calculationsinnthe explanation below.
Explanation:
The reaction is a neutralization reaction between NaOH and H₃PO₄. The equation of the reaction is given as follows:
3 NaOH + H₃PO₄ ---> Na₃PO₄ + 3 H₂O
The molarity of the NaOH solution is 0.238 mol/L.
Average volume of NaOH used during the titration to arrive to endpoint = (4.6 + 3.9 + 4.5) mL / 3 = 4.33 mL
Molarity is defined ratio of the number of moles of solute to the volume of solution. Mathematically, molarity = number of moles/volume in Litres
Number of moles of NaOH reacted = 0.238 mol/L × (4.33mL × 1 L/1000 mL)
Number of moles of NaOH = 0.00103 moles
From the equation of the reaction, 3 moles of NaOH reacts with 1 mole of H₃PO₄
0.00103 moles of NaOH will react with 0.00103 x 1/3 moles of H₃PO₄ = 0.000343 moles of H₃PO₄.
Therefore, number of moles of H₃PO₄ that reacted is 0.000343 moles
What is the largest number
(of a single species) a specific area can support?
A. Population
B. Unlimited factor
C. Carrying capacity
D. Niche
Answer:
carrying capacity
Explanation:
Thus, the carrying capacity is the maximum number of individuals of a species that an environment can support. Population size decreases above carrying capacity due to a range of factors depending on the species concerned, but can include insufficient space, food supply, or sunlight.
The following data were obtained using the same procedure as in your experiment. Using these data, calculate the percent malachite in the sample.
FW information (in g/mol): malachite = 221.11; CO2 = 44.01; H2O = 18.02
Mass of crucible: 23.8839 g Mass of crucible + sample: 26.0496 g
Mass of crucible + decomposed sample: 25.7013 g
One molecule of malachite decomposes to make:_______.
___________molecule(s) of copper oxide
___________molecule(s) of carbon dioxide
____________molecule(s) of water
a. 1, 2,2
b. 2, 1, 1
c. 1, 1, 1
d. 1,0.5, 0.5
Answer:
c
Explanation:
Suppose an enzyme and its substrate obey the lock and key model of enzyme catalysis. Which of the following would be true of the enzyme?
a. only one substrate could be converted to product by the enzyme
b. the active site of the enzyme must be rigid
c. the entire enzyme must be rigid
d. the active site of the enzyme must be flexible
e. the enzyme could bind different substrates if the substrates shared a common motif somewhere in their structures
Answer:
only one substrate could be converted to product by the enzyme
Explanation:
If an enzyme obeys the lock and key model, it then follows that the design of the enzyme is unique to a particular substrate.
Just as only the correct key can effectively fit into a lock, only the appropriate substrate whose design matches that of the enzyme can fit into the enzyme.
Owing to the lock and key model of enzyme activity, only one enzyme could interact with a substrate to yield particular product.
What is the phase of water at 0.25 atm and 0°C?
Water
(liquid)
Pressure (atm)
0.5-
0.25
Ice
(solid)
Water vapor
(gas)
0
000
Temperature (°C)
O A. Gas
O B. Solid and gas
O C. Solid and liquid
D. Solid
Water is in the solid phase at 0.25 atm and 0°C.
In what phase is water at 25?A pressure of 50 kPa and a temperature of 50 °C correspond to the “water” region—here, water exists only as a liquid. At 25 kPa and 200 °C, water exists only in the gaseous state.
What phase is water in at 0 C?Under standard atmospheric conditions, water exists as a liquid. But if we lower the temperature below 0 degrees Celsius, or 32 degrees Fahrenheit, water changes its phase into a solid called ice.
Learn more about the solid phase here https://brainly.com/question/13396621
#SPJ2
9. Which property is not important when selecting a material to use as a light bulb filament?
d
high melting point
high vapor pressure
high ductility
Answer:
high melting point
Explanation:
The filament of a bulb is often heated to very high temperatures as the bulb is in operation.
Many times, electric bulbs may have to be on for a whole day and they may reach temperatures that are outrageously high in the process.
The material of the filament must have a very high melting point so that it doesn't melt while the bulb is still in operation.
Answer:
Actually the answer is High Vapor pressure
Explanation:
Using the following reaction:
H2SO4 (aq) + 2NaOH (aq) → Na2SO4 (aq) + 2H2O (l)
Calculate the molarity of the H2SO4 solution if 14.92 mL of NaOH was necessary to reach the endpoint of a titration. The molarity of the NaOH solution was 0.83 M and 25.18 mL of H2SO4 was added to the Erlenmeyer flask.
Answer:
The molar concentration of the H₂SO₄ solution is 0.28 M
Explanation:
Molar concentration = number of moles / volume in litres
Number of moles = molar concentration × volume
From the equation of reaction, molar ratio of acid to base = 1 : 2
Using the formula; Na/Nb = CaVa/CbVb
Where Na is the number of moles of acid; Nb = number of moles of base; Ca = concentration of acid; Va = volume of acid; Cb = concentration of base; Vb = volume of base; Na/Nb = mole ratio of acid to base
Substituting the given values in the equation:
1/2 = Ca × 25.18 / 0.93 × 14.92
Ca = 0.93 × 14.92/ 25.18 × 2
Ca = 0.28M
Therefore, the molar concentration of the H₂SO₄ solution is 0.28 M
Draw bond-line formulas of all dichloro derivatives that might be formed when 1-chloro-2,2,3,3,-tetramethylpentane is allowed to react with Cl 2 under UV irradiation. For each structure, indicate, with an asterisk, any stereocenters that might be present. Predcit the percentage of each product using the relative reactivities 3 0 = 5.3, 2 0 = 3.6, 1 0 = 1
Answer:
Explanation:
This is a halogenation reaction i.e substitution or replacement of a single or more than a single hydrogen atom in the organic alkane compound with the halogen(here it is chlorine).
The chlorination of 1-chloro-2,2,3,3-tetramethylpentane under UV light resulted in the formation of five (5) dichloro derivatives which are shown in the image attached below.
Also, the compounds containing a stereocenter (i.e a location within the compound composing of various substituents in which the interchangeability of these substituents has the tendency of resulting into a stereoisomer) are indicated with an asterisk in the image below.
From the image below:
compound 1 ⇒ 1,1-dichloro-2,2,3,3-tetramethylpentane = 2° C
∴
The given relative reactivity rate for 2° = 3.6x
For compound 2 ⇒ 1,4-dichloro-2,2,3,3-tetramethylpentane = 2° = 3.6x
For compound 3 ⇒ 1,5-dichloro-2,2,3,3-tetramethylpentane = 1° = 1x
For compound 4 ⇒ 1-chloro-2-chloromethyl-2,3,3-trimethylpentane
= 1° = 1x
For compound 5 ⇒ 1-chloro-3-chloromethyl-2,2,3-trimethylpentane
= 1° = 1x
As such, we have:
2(3.6x) + 3(1x) = 100
7.2x + 3x = 100
10.2x = 100
x = 100/10.2
x = 9.803°
∴
For compound (1) = 3.6(9.803) = 35.3%
For compound (2) = 3.6(9.803) = 35.3%
For compound (3) = 1(9.803) = 9.803°%
For compound (4) = 1(9.803) = 9.803°%
For compound (5) = 1(9.803) = 9.803°%
What is the name of this molecule?
Explanation:
here is your answer
hope this will help you
Suppose, in an experiment to determine the amount of sodium hypochlorite in bleach, you titrated a 23.92 mL sample of 0.0100 M K I O 3 with a solution of N a 2 S 2 O 3 of unknown concentration. The endpoint was observed to occur at 13.80 mL . How many moles of K I O 3 were titrated
Answer:
2.39x10⁻⁴ moles
Explanation:
As the problem asks us the number of moles of KIO₃ that were titrated, all that is required of us is to calculate how many moles of KIO₃ are there in 23.92 mL of a 0.0100 M solution (All moles in the samples are titrated).
We can do so by using the definition of molarity:
Molarity = moles / litersconverting 23.92 mL ⇒ 23.92 / 1000 = 0.02392 L
moles = 0.0100 M * 0.02392 Lmoles = 2.39x10⁻⁴ molesWhich of the following is an alkaline earth metal?
A Carbon
B aluminum
C magnesium
D silicon
Answer:
Magnesium.
Explanation:
Because it is in group II
Indicate type of chemical reactions for 2Mgl2+MN(SO3)2=2MgSO3+Mnl4
Answer:
double decomposition reaction
The density of aluminum is 2.7 g/cm3.
Part A
What is its density in kilograms per cubic meter?
Express your answer in kilograms per cubic meter to two significant figures.
Answer:
2700 kg/m³
Explanation:
First let's convert 2.7 g/cm³ to kg/cm³, keeping in mind that 1 kilogram equals 1000 grams:
2.7 g/cm³ * [tex]\frac{1kg}{1000g}[/tex] = 0.0027 kg/cm³Finally we need to convert 0.0027 kg/cm³ to kg/m³, keeping in mind that 1 meter equals 100 centimeters, as follows:
0.0027 kg/cm³ * [tex](\frac{100cm}{1m} )^3[/tex] = 2700 kg/m³The answer is 2700 kg/m³.
43 mg = [?]g
A. 0.043 g
B. 4.3 g
C. 4300 g
D. 43,000 g
Answer:
Option A (0.043 g) is the correct answer.
Explanation:
Given:
= 43 mg
As we know,
[tex]1 \ mg = \frac{1}{1000} \ g[/tex]
then,
⇒ [tex]43 \ mg = \frac{43}{1000} \ g[/tex]
[tex]= 0.043 \ g[/tex]
Thus, the above is the correct alternative.
Compound X has the same molecular formula as butane but has a different boiling point and melting point. What can be concluded about Compound X?
A It is a four-carbon alkene or alkyne.
B It is an optical isomer of butane.
C It is a geometric isomer of butane.
D It is a structural isomer of butane.
need this for gradpoint:)
Answer:
d
Explanation:
Methanoic acid is the simplest carboxylic acid molecule. It has one carbon atom. Draw the structural model for methanoic acid (using C and H).
ANSWER IS ABOVE
THE METHANOIC ACID
Determine the molarity of the sodium ions when 78.0 g Na2S is dissolved in water for a final volume of 1.0 L.
Answer:
[Na⁺] = 1.99 M
Explanation:
Na₂S is a ionic salt that can be dissociated.
Dissociation equation is:
Na₂S → 2Na⁺ + S⁻²
1 mol of sodium sulfide can give 2 moles of sodium cation.
We convert moles of salt: 78 g . 1mol / 78.06 g = 0.999 moles
As ratio is 1:2, after dissociation we have (0.999 . 2) = 1.998 moles of Na⁺
Molarity is a type of concentration.
It indicates moles of solute in 1 L of solution and in this case, we have 1 L as final voulme.
Moles of Na⁺ are 1.998 moles. Then molarity (mol/L) is:
M =1.99 mol/L
An aqueous solution contains 0.29 M of benzoic acid (HA) and 0.16 M of sodium benzoate (A-). If the pH of this solution was measured to be 4.63, calculate the pKa of benzoic acid g
Answer:
pKa = 4.89.
Explanation:
We can solve this problem by using the Henderson-Hasselbach equation, which states:
pH = pKa + log [tex]\frac{[A^-]}{[HA]}[/tex]
In this case [A⁻] is the concentration of sodium benzoate and [HA] is the concentration of benzoic acid.
We input the given data:
4.63 = pKa + log [tex]\frac{0.16}{0.29}[/tex]
And solve for pKa:
pKa = 4.89
