if you experience brake failure...

Answers

Answer 1

Answer:

If your brakes go out, you want to do three things.

Explanation:

First, downshift to a lower gear. Second, if you have regular brakes pump the brake pedal fast and hard to build up brake fluid pressure.  Gradually apply the parking brake and be prepared for the car to skid. hope this helps you :)

Answer 2
If it is in a car, then try to safely come to a stop somehow. If there are no cars around, you can just let your car roll to a stop. Or try to stop the car using the hand brake.

If there are cars around, then try to drive off the road if it is safe.

Related Questions

Explain orthographic
and multi-view
projection​

Answers

Answer:

Orthographic projection is a projection method to present three-dimensional shapes in two-dimensional format in which the projection lines are drawn to be orthogonal to the plane of projection, such that each view of the three-dimensional object is translated to a view of the orthographic projection and orthogonal to the view

A multiview projection is the representation of a three-dimensional projection by two or more two-dimensional views

Explanation:

what is your favorite generation of the mustang?

Answers

Answer:

6TH AKA THE 2015-PRESENT

Explanation:

Answer:

I like them all except '74ish all the way up to '93.

A ____ is marked by two sets of double yellow lines, with each set having a broken line on the inside, and a solid line on the outside. white arrows appear in this lane as well.

Answers

Answer:

  center left-turn lane

Explanation:

A center left turn lane will be marked as described. The arrows, if present, generally indicate that left turns are permitted from the lane with these markings.

__

If the double yellow lines are solid, they are considered to be a "barrier" and are not to be crossed.

Answer:

 center left-turn lane

Explanation:

If you think a hazard is serious, what is the best way to ensure that OSHA will
conduct a site inspection?
Help

Answers

Answer:

The best way to ensure that OSHA will conduct a site inspection is by the submission a signed (by a current employee or employee representative) Formal Written complaints following OSHA guidelines (which can be found in the  Council of Safety and Health (COSH) website) which will enable the commencement of process for an on site inspection

As such it is advisable to go through the following procedure before, filing a complaint

1) Talk to your workers union about the hazard

2) If you do not belong to a union, talk to your co-workers

3) Inform your employer who has responsibility for on the job safety

4) Speak or have a meeting with OSHA so as to receive guidance before filing a complaint

Explanation:

If you think a hazard is serious, the best way to ensure that OSHA will conduct a site inspection is to file a complaint.

Hazard simply means a potential source of harm. It should be noted that hazards can have detrimental effect on the health of an individual.

If you think a hazard is serious, the best way to ensure that OSHA will conduct a site inspection is to file a complaint asking OSHA to inspect the workplace. In a situation whereby OSHA finds a serious hazard, it'll be kept confidential.

Read related link on:

https://brainly.com/question/25604446

Your friend wears earbuds while driving to school each day. Is this safe? Is it legal? Explain why or why not.

Answers

Answer:

Its not safe but it isn't illegal. Its not safe because if their volume was up they wouldn't be able to hear if someone is honking at them or listen to emergency vehicles. They would be oblivious to what's going on around them.

Explanation:

im an amazing guy <3

Which type of engineering design uses an already existing design?
A. top-down design
B. spiral design
C. bottom-up design
D.
incremental design​

Answers

Answer:

The correct option is;

C. Bottom-up design

Explanation:

The bottom-up design is meant for system redesign or re-engineering of an existing design involving component upgrading or legacy systems replacement

The bottom-up design approach is also meant for applications where there is a new interface requirement for the original system in order to determine the functionality of the newly combined systems and also where a novel component is incorporated into the existing design.

The bottom-up approach starts with the analysis of the interoperability of the components to the modules and eventually the analysis of the system requirements.

what kind of line is used to indicate the supporting beam

Answers

Answer:horizontal

Explanation: because it is supporting it

Built-up roofing, also called BUR, is the most common roofing material used on low-slope roofs. It is composed of alternating layers of reinforcing fabric and bitumen (asphalt) and is finished with a top layer of aggregate, such as stone or gravel.

Prescription eye protection suitable for an electrician should always include a. a safety strap b. soft nose guards c. side shields d. tinted lenses

Answers

Answer:

The correct option is;

Side shields

Explanation:

Electricians working at a construction site are exposed to arc flashes and sparks which can enter into the eyes causing painful sensation as such a prescription eye protection suitable for an electrician according to OSHA regulations the employer should ensure that the electrician makes use of eye protection that has side protection in situations that include hazards from flying objects.

Engineers are looking for a new material to build the body of an airplane. They agree that the material must be lightweight, but also strong and long-lasting. Above all, the material must maximize the safety of the passengers. Several engineers have developed some initial plans. Which stage of technological design is described in this passage

Answers

Answer:

Design a solution

Explanation:

In the design a solution stage, solutions and ideas to solve the problem or design of the product are generated and details of the problem solution or product design are developed

The generated ideas and details are put together to get a workable solution

Stages of technological design, includes

1) Problem identification

2) Design a solution or designing of a product

3) Design Implementation

4) Solution or product evaluation

If sail boats A and B are approaching each other with the wind on different sides, why is vessel A considered the give-way vessel (vessel that must take early and substantial action to avoid a collision)?

Answers

Answer:

The reason is because when the wind approaches each sailboat from a different side, the sailboat that the wind approaches from the port side, which is the left side is the give-way vessel.

Whereby the wind approaches the vessel A from the port (left) side then vessel A is considered the give-way vessel

The give-way vessel is the vessel that will have to take expeditious steps to create  access for the other vessels by either changing course, stopping, or moving with reduced speed

Explanation:

HELPPPP. How many engineers are there in u.s?

Answers

There were about 1.6 million engineers employed in the United States in May 2015. Mechanical, civil, and industrial engineers together made up half of all employed engineers.

Answer:

There were about 1.6 million engineers employed in the United States in May 2015. Mechanical, civil, and industrial engineers together made up half of all employed engineers. The three smallest engineering occupations—agricultural engineers, marine engineers and naval architects, and mining and geological engineers—together made up about 1 percent of total engineer employment......

Which of the following is the last step in creating a budget?
A. Identify income
B. Identify variable expenses
C. Identify fixed expenses
D. Determine savings or debt

Answers

Answer:

D. Determine saving or debt

Explanation:

The application of technology results in human-made things called

Answers

Answer:

Internet of things

Explanation:

This is a good example where the application of technology results are applied to human made things.

Internet of things (IOT), involves the application of one technology results–the internet, embedded into devices such as refrigerator, television etc so as to send and receive data (digital instructions). Such applications of technology results has revolutionized the way we use "human made things".

what is the difference between science and engineering?

Answers

Answer:

The following table is among some of the discrepancies between some of the different topics.

Explanation:

Science seems to be the application of structured organized facts which could be interpreted scientifically because when engineering would be a branch of science which deals with either the profession of acquiring including using technological, computational, economical and severity of adverse effects to design and manufacture equipment and devices that seem to be beneficial to mankind.Science would be a set of information and established frameworks whereas the use of these models and information to construct structures as well as mechanisms becomes engineering.

You are driving a vehicle that has an automatic transmission. When you park on a hill, you
should
A: Set the parking brake first, before you shift the transmission into Park.
B: Shift the transmission into Park, and leave the parking brake off.
C: Set the parking brake, and shift the transmission into Neutral.

Answers

Answer:

The answer is A. Set the parking brake first, before you shift the transmission into Park.

An automatic gearbox is a multi-speed transmission system. The correct option is A.

What is the automatic transmission?

An automatic gearbox is a multi-speed transmission system that is used in internal combustion engine-powered motor vehicles that do not require any driver input to change forward gears. Thus, making the process of shifting gears automated.

The correct way to park an automatic transmission vehicle is to set the parking brake first before you shift the transmission into Park. Therefore, the correct option is A.

Learn more about Automatic Transmission:

https://brainly.com/question/14093047

#SPJ2

A large piece of ground is developed with lights, streets, and sewers. The subdivider wants to get it ready for building. He does an environmental impact statement and makes a large map which shows where each lot and block is located. Streets, parks, and utility easement are also shown. This is visual representation is called:

Answers

Answer:

Subdivision plat map

Explanation:

A subdivision plat map is a map plan of a given scale having the planned lot subdivisions and amenities. Subdivision plat map also show easement boundaries, access routes, streets and alleyways present in or adjacent to the tract of land that is being subdivided into lots

The process of subdivision of a tract land of land requires the approval the counties and the cities in which the land is located.

4. Two technicians are discussing the evaporative emission monitor. Technician A says that serious monitor faults cause a blinking malfunction indicator lamp
(MIL) or even an engine shutdown. Technician B says that the engine computer will run the EVAP monitor when fuel level is within 15 to 25 percent and the TP
sensor position is between 9 and 10 percent. Who is correct?
O A. Neither Technician A nor B
O B. Both Technicians A and BN
O C. Technician A
OD. Technician B

Answers

Answer:

The correct option is;

Neither Technician A nor B

Explanation:

The evaporative emission monitor or Evaporaive Emission Control System EVAP System monitors enables the Power Control Module of the car to check fuel system leak integrity and the vapor consumption efficiency during engine combustion

It is a requirement of EPA on cars to check the emission of smug forming evaporates from cars

Serious monitor faults can cause the turning on of the check engine lights and the vehicle will not pass OBD II test, but it will not lead to engine shutdown

It runs when the engine is 15 to 85% full and the TP sensor is between 9% and 35%.

Therefore, the correct option is that neither Technician A nor B are correct.

The ramp in the railway station has rough surface .why?

Answers

Answer:

To increase the friction so we do not slip while walking.

Explanation:

If the surface is smooth then the frictional force between the ramp and the feet becomes less and the chances of slipping are greater.

The ramp on a railway station has a rough surface to increase friction so that we do not slip while walking on it. If the surface is smooth, then the frictional force between the ramp and the feet becomes less and the chances of slipping are greater.

Atmospheric air at 1 atm has a dry-bulb temperature of 20°C and a wet-bulb temperature of 15°C. Determine the dew point temperature

Answers

Answer:

The dew point temperature is 11.65°C

Explanation:

Dew point temperature formula is given as follows;

From the modified Apjohn equation, we have;

[tex]P_v = P'_v -\dfrac{1.8 \times p (t - t')}{2700}[/tex]

Which gives;

The saturation vapor pressure at 15°C = 1.705 kPa

[tex]P'_v[/tex] = 1.705 kPa

p = 101.325 kPa

[tex]P_v[/tex] = 1.705 - 1.8*101.325*(20 - 15)/2700 = 1.36725 kPa

The dew point temperature is the steam saturation temperature at 1.36725 kPa

= 6.9696 + (17.4953 - 6.9696)*(0.0136725 - 0.01)/(0.02 - 0.01) = 10.84°C by approximation calculation from steam tables and  284.8 K = 11.65°C from Wolfram Alpha.

Steam enters an adiabatic turbine at 8 MPa and 500 C with a mass flow rate of 3 kg/s andleaves at 30 kPa.The isentropic efficiency of the turbine is 0.90. Neglecting the kinetic energy change of the steam, determine (a) the tem-perature at the turbine exit and (b) the power output of theturbine

Answers

Answer:

(a) The exit temperature = 69.1°C

(b)  The power output = 8.3 MW

Explanation:

(a) The enthalpy of steam at 8 MPa and 500°C is given (from online sources) as h₁ = 3399 kJ/kg

The exit temperature = The saturation temperature at 30 kPa = T₄ = 69.096 + 273.15 = 342.246 K

The exit temperature = 69.1°C

(b) The mass flow rate = 3 kg/s

The isentropic efficiency = 0.9 = (h₁ - h₂)/(h₁ - h₂[tex]_s[/tex])

s₁ = 6.727 kJ/kgK

h₂[tex]_s[/tex] = 289.229+ 2335.32* (6.8235 - 6.727 )/6.8235 = 322.26 kJ/kg

Therefore, h₂ = h₁ - (h₁ - h₂[tex]_s[/tex])*0.9

h₂ = 3399  - (3399  - 322.26 )*0.9 = 629.934 kJ/kg

The power output = [tex]\dot m[/tex](h₁ - h₂) = 3 *(3399 - 629.934) = 8307.2 kJ/s =

8.3 MW.

what recent major breakthroughs are attributed to engineers in improving the quality of our everyday lives?

Answers

From the mass production of the automobile to space travel, from the telephone to the Internet, and from bioengineered foods to clean water, engineers have applied their expertise to improve the quality of our lives

Which element refers to musically depicting the emotion in the words of a musical piece?
A intellectual movement of humanism
B. word painting
C. balancing the usage of rhythm and tone color
D. combining lyrics and rhythm in a motet

Answers

Answer:

The correct option is;

B. Word painting

Explanation:

Word painting is the musical art of composition of music literally describing by reflection the action of the lyrics of the music. Word painting is also referred to as text painting or tone painting. Word painting is a technique commonly used in Renaissance music such as madrigals and the technique of word painting can also be found in church music such as in Hendel's Messiah

An example of word painting is where ascending set of musical notes will be paired with lyrics about increasing.

Answer: B. Word painting

Explanation:

Two technicians are discussing solder wire repair. Technician A says that electrical tape can be used to cover the joint. Technician B says that heat shrink tubing can be used to cover the joint. Who is correct?

Answers

Answer:

8282777727e7e87e7e8e88282883

What is kinetic energy?

Answers

Answer:

kinetic energy means energy which a body possesses by virtue of being in motion

Answer:

Kinetic Energy is a type of energy which a body possesses by virtue of being in motion.

OR

It's the energy of mass in motion.

Hope it helps!!Please mark me as the brainliest!!!

Thanks!!!!

First Aid is used for all of the stated reason except:
O Protect Life
O Prevent injury
O Promote recovery
O Preserve life

Answers

prevent injury

Explanation:

one is already injured Soo there's no protection there

Question 6: Which of the following is NOT true if you are changing into a
turning lane?
You should activate your signals 100 feet beforehand
You should activate your signals when you get into the turn lane
You should activate your signals before you get into the turn lane
You should use your hands to signal if your lights do not work

Answers

Answer:

You should activate your signals 100 feet before you turn, becuase of that you should not wait until you are turning to turn on your signals. If you do not have working lights use your hands. So the answer that is inccorect is B.

You should activate your signals when you get into the turn lane is NOT true

Because you are supposed to single beforhand not while you're in the lane.

Im taking my drivers ed too. :)

What is version control?

Answers

Answer:

version control are a category of software tool that help a software team manage changes to source code over time.

how many types of engineering specialist are there?

Answers

There are now six major branches of engineering: Mechanical, Chemical, Civil, Electrical, Management, and Geotechnical, and literally hundreds of different subcategories of engineering under each branch.

There are about 40 types of engineering specialists

Unless otherwise posted, the speed limit for cars in a residential area is
A: 25 miles
per
hour
B: 30 miles per hour.
C: 35 miles per hour.

Answers

Answer:

The answer is A (25 miles per hour).

Answer:

A. 25 miles

Explanation:

It is that low because people need to have enough time to stop a sudden stop light or pedestrian. Often times people hit people because they are wearing dark clothing or someone stepped out into a unprotected intersection.

__is a mechanical force generated by a solid object moving through a fluid.

Answers

Answer:

Drag

Explanation:

Other Questions
1. A physical quantity P is related to four observables a, b and c as follows: P= (a3b 2 /c4 ) The percentage errors of measurements in a, b and c are 1%, 4% and 2% respectively. What is the percentage error in quantity P? Please help Describe a way that you can remember the elements of the reflection matrices if you forget where the 1s, -1s, and 0s belong. Explain how to overhand serve what are the factors of 47 (cuz im STUPID and i dont feel like doing this cuz im working on geogrophy) The human genome project identified the sequence of base pairs in human DNA and identified several genes. Which question would least likely lead to a scientific investigation based on these findings? Answers: Are certain humans more likely to develop genetic diseases? How can DNA be used to identify criminals? Can drugs be developed to target certain genes? Should there be laws to protect DNA information? the US was successful in containing communism in what country Reasons why operating system is pivotal in teaching and learning a solenoid that is 98.6 cm long has a cross-sectional area of 24.3 cm2. There are 1310 turns of a wire carrying a current of Help! Will give brainliest. You purchased a stock at a price of $46.55. The stock paid a dividend of $1.79 per share and the stock price at the end of the year is $52.45. What was the dividend yield PLEASE HELP !! (2/5) -50 POINTS- With which set of information can you construct a unique triangle?OA the measurements of all the angles.the lengths of two sidesOC. the measurements of two anglesOD. the lengths of all the sidesOE the measurement of one angle A deli sandwich shop is offering either a ham or turkey sandwich, either tomato or vegetable soup, and either coffee or milk for their lunch special. What is the probability that a customer will choose vegetable soup as part of the chosen combination? Is a graphic novel a narrative All of the following statements regarding convertible bonds are true except:_________. A. Holders of convertible bonds can generally decide whether to convert to stock. B. Holders of convertible bonds have the potential to profit from increases in stock price. C. Holders of convertible bonds can choose when to convert to stock. D. Holders of convertible bonds have the option to not convert and continue receiving bond interest payments and par value at maturity. E. Holders of convertible bonds can choose how many shares of stock to receive at conversion. Y * 3 = 81 please i need it for today NEED HELP ASAP PLEASE What makes characters complex? What are some of the ways Garcia creates great characters? Who is the unlikeable character for Garcia? How does he connect with them? A section of the movie is titled, Fighting the Beast of Creative Insecurity. Explain what Garcia says the beast is and how you fight it. 5y-5y^2-5+2+2y+3y^2-1 On January 1, a company issues bonds dated January 1 with a par value of $390,000. The bonds mature in 5 years. The contract rate is 9%, and interest is paid semiannually on June 30 and December 31. The market rate is 8% and the bonds are sold for $405,830. The journal entry to record the issuance of the bond is: Multiple Choice Debit Bonds Payable $390,000; debit Bond Interest Expense $15,830; credit Cash $405,830. Debit Cash $405,830; credit Bonds Payable $405,830. Debit Cash $405,830; credit Premium on Bonds Payable $15,830; credit Bonds Payable $390,000. Debit Cash $405,830; credit Discount on Bonds Payable $15,830; credit Bonds Payable $390,000. Debit Cash $390,000; debit Premium on Bonds Payable $15,830; credit Bonds Payable $405,830. Diana paints 150 fence posts and chuck paints 130 fence posts. Diana paints 10 more fence posts than chuck. How many fence posts does chuck paint per hour?