Answer:
See explanation.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to realize that the NaCl solution must react with an aluminum-containing substance, say the hydroxide or any other salt, so that the following equation will take place:
[tex]3NaCl(aq)+Al^{3+}\rightarrow 3Na^+(aq)+AlCl_3(s)[/tex]
In such a way, given the volume of the NaCl solution, it must be necessary to know its concentration, in order to get moles of this salt, further use the 3:1 mole ratio of NaCl to AlCl3 and the molar mass of the latter (133.34 g/mol) in order to solve an stoichiometric setup like the following:
[tex]m_{AlCl_3}=V_{NaCl}*M_{NaCl}*\frac{1molAlCl_3}{3molNaCl} *\frac{133.34gAlCl_3}{1molAlCl_3}[/tex]
Besides, you must make sure the volume is in liters.
Best regards!
An infant acetaminophen suspension contains 80 mg/0.80 mL suspension. The recommended dose is 15 mg/kg body weight.
How many milliliters of this suspension should be given to an infant weighing 13 lb.
Answer:
0.8853 mL
Explanation:
First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:
13 lb * [tex]\frac{0.454kg}{1lb}[/tex] = 5.902 kgThen we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:
15 mg/kg * 5.902 kg = 88.53 mgFinally we calculate the required mL of suspension, using its concentration:
88.53 mg ÷ (80 mg/0.80 mL) = 0.8853 mLGive the change in conditions required to go from a gas to a solid. Give the change in conditions required to go from a gas to a solid. Decrease temperature or reduce pressure. Increase temperature or reduce pressure. Increase temperature or increase pressure. Decrease temperature or increase pressure. None of the above.
Answer:
Decrease temperature or reduce pressure
Why can light be treated like a particle?
Answer:
Light can be treated like particles because it is made of chunks like things called protons.
A 1.375 g sample of mannitol, a sugar found in seaweed, is burned completely in oxygen to give 1.993 g of carbon dioxide and 0.9519 g of water. The empirical formula of mannitol is
Answer:
[tex]C_3H_7O_3[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to infer that the empirical formula of mannitol contains carbon, hydrogen and oxygen, so that the first step is to calculate the moles of C and H contained in the CO2 and H2O, respectively, as the only sources of these two elements in the formula:
[tex]n_C=1.993gCO_2*\frac{1molCO_2}{44.01gCO_2}*\frac{1molC}{1molCO_2} =0.0453molC\\\\n_H=0.9519gH_2O*\frac{1molH_2O}{18.02gH_2O}*\frac{2molH}{1molH_2O} =0.106molH[/tex]
Next, we calculate the grams and moles of O by subtracting the mass of C and H from the mass of the sample:
[tex]m_O=1.375g-0.0453molC*\frac{12gC}{1molC}-0.106molH*\frac{1.01gH}{1molH}=0.724gO\\\\n_O=0.724gO*\frac{1molO}{16.0gO} =0.0453molO[/tex]
Finally, we divide the moles of C, H and O by 0.0453 as the fewest moles of both C and O to find the mole ratios in the formula:
[tex]C:\frac{0.0453mol}{0.0453mol} =1\\\\H:\frac{0.106mol}{0.0453mol} =2.34\\\\O:\frac{0.0453mol}{0.0453mol} =1[/tex]
To get:
[tex]CH_{2.34}O[/tex]
Which must be multiplied by 3 to get whole numbers for all the subscripts, and therefore obtain:
[tex]C_3H_7O_3[/tex]
Regards!
Why does glucose and acentic acid have the same empirical formula
Answer:
Examples. Glucose (C6H12O6), ribose (C5H10O5), Acetic acid (C2H4O2), and formaldehyde (CH2O) all have different molecular formulas but the same empirical formula: CH2O.
Explanation:In chemistry, the empirical formula of a chemical compound is the simplest positive integer ratio of atoms present in a compound.
Verdadero o falso si un átomo presenta de 5 a 7 electrones en su nivel más extremo tenderá a perderlos?
Naturally occurring gallium is a mixture of isotopes
that contains 90.11% of Ga-69 (atomic mass = 68.93
u) and 9.89% of Ga-71 (atomic mass 70.92 u).
What is the average atomic mass of naturally
occurring gallium?
A) 69.93 amu
C) 69.50 amu
B) 69.12 amu
D) 69.00 amu
which of the following experiments raises ethical concerns
Answer:
Research that releases a poisonous gas into the air.
Explanation:
Since I don't know the options I will guess it is ^
Lee y analiza a detalle el Anexo #1 de este plan de trabajo el cual habla sobre las fuentes alternativas de energía. Posteriormente con la información elabora un cartel o un cuadro sinóptico en tu cuaderno donde organices la información para darla a conocer a los miembros de tu comunidad.
Answer: el texto no es tan claro
given two equations representing reactions: which type of reaction is represented by each of these equations?
Answer:
Equation 1 - nuclear fission
Equation 2 - nuclear fusion
Explanation:
Nuclear fission is a reaction in which a large nucleus is split into smaller nuclei when it is bombarded by neutrons. The process produces more neutrons to continue the chain reaction. This is clearly depicted in equation 1 as shown in the question.
Nuclear fusion is a reaction in which two light nuclei combine in order to form a larger nuclei. This is clearly depicted in equation 2 as shown in the question.
In the first reaction, a neutron is released, and in the second a helium atom is released. The given two equations represent nuclear fission and fusion.
What are nuclear reactions?A nuclear reaction is a reaction that involves the nuclei of the atom and the absorption and release of energy. In the first reaction, a big nucleus is split by the neutron bombardment into smaller nuclei.
In the second reaction the process of nuclear fusion, two nuclei combine into a single larger nucleus that is shown as:
₁¹H+ ²₁H → ³₂He
Therefore, nuclear fission and fusion are represented by each of these equations.
Learn more about nuclear reactions here:
https://brainly.com/question/16526663
#SPJ5
Guys I don't know science, if you are intelligent tell me what is science
Explanation:
Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence
Según la cinética química para que una reacción ocurra, los átomos o moléculas deben
I. Chocar con la suficiente energía. II. Chocar con una concentración adecuada. III. Ser choques efectivos
A) Solo I.
B) Solo I y II.
C) Solo I y III.
D) Solo II y III.
E) I, II, III.
Answer:
solo I
Explanation:
Según esta teoría para que se produzca una reacción deben cumplirse tres condiciones: Las moléculas de los reactivos tienen que chocar entre sí. Estos choques deben de producirse con energía suficiente de forma que se puedan romper y formar enlaces químicos.
Ammonia burns in the presence of a copper catalyst to form nitrogen gas. 4 NH3(g) + 3 O2(g) → 2 N2(g) + 6 H2O(g) ΔΗ = -1267 kJ What is the enthalpy change to burn 38.4 g of ammonia?
Answer:
-713 kJ
Explanation:
Step 1: Write the balaned thermochemical equation
4 NH₃(g) + 3 O₂(g) → 2 N₂(g) + 6 H₂O(g) ΔΗ = -1267 kJ
Step 2: Calculate the moles corresponding to 38.4 g of NH₃
The molar mass of NH₃ is 17.03 g/mol.
38.4 g × 1 mol/17.03 g = 2.25 mol
Step 3: Calculate the enthalpy change to burn 2.25 mol of ammonia
According to the thermochemical equation, 1267 kJ are released per 4 moles of ammonia that react.
2.25 mol × (-1267 kJ/4 mol) = -713 kJ
In the electrolysis of water, how long will it take to produce 75.00 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 205.0 mA
answer is 2546 h
mark me as Branliest
Emily spills concentrated sodium hydroxide solution on her lab bench. What she should do first?
Answer:
Explanation: hell noo
HELPPP PLEASEEEEE
Name the following alkane molecule:
Answer:
5–bromo–9–chlorodecane
Explanation:
To name the compound given above, the following must be obtained:
1. The longest continuous carbon chain. This gives the parent name of the compound.
2. The substituent group attached to the compound.
3. Position of the substituent group.
4. Combine the above to obtain the name.
Now, we shall determine the name of the compound as follow:
1. The longest continuous carbon chain is 10. Thus, the parent name of the compound is decane.
2. The substituent groups attached to the compound are:
I. Bromine (Br) => Bromo
II. Chlorine (Cl) => Chloro
3. The position of the substituent groups are:
I. Br => carbon 5
II. Cl => carbon 9
NOTE: numbering is done alphabetically.
4. Therefore, the name of the compound is:
5–bromo–9–chlorodecane
Answer:
A.
Explanation:
I chose this answer and it was correct ♀️
You are an intermediate product of an industrial process which intends to separate iron from its ore. A well known iron ore is hematite. Which of these ores does not contain iron?
Goethite
Malachite
Siderite
Limonite
Answer:
Malachite
Explanation:
Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!
Classify each of the following as a Strong acid (sa) or a Weak acid (wa) and indicate how each should be written in aqueous solution.
1. hydrobromic acid
2. hydrochloric acid
3. carbonic acid
Write a net ionic equation for the reaction that occurs when aqueous solutions of hydrochloric acid and barium hydroxide are combined.
Answer:
A. 1. Strong acid (sa): Hydrobromic acid: HBr (aq)
2. Strong acid (sa); Hydrochloric acid: HCl (aq)
3. Weak acid (wa); Carbonic acid: H₂CO₃ (aq)
B. H+ (aq) + OH- (aq) ----> H₂O (l)
Explanation:
Strong acids are which ionize completely in aqueous solution into hydrogen ions and the corresponding anion. Examples of strong acids include hydrobromic acid, hydrochloric acid, tetraoxosulfate (vi) acid.
The ionization of hdyrobromic and hydrochloric acids in aqueous solution is given below:
1. Hydrobromic acid: HBr (aq) ----> H+ (aq) + Br- (aq)
Hydrobromic acid in aqueous solution ionizes completely into hydrogen ions and bromide ions
2. Hydrochloric acid: HCl (aq) ----> H+ (aq) + Cl- (aq)
Hydrochloric acid in aqueous solution ionizes completely into hydrogen ions and chloride ions
Weak acids are acids which ionizes only partially in aqueous solutions to hydrogen ions and the corresponding anions. Examples of weak acids are carbonic acid and ethanoic acid. The ionization of carbonic acid in aqueous solution is shown below:
3. Carbonic acid: H₂CO₃ (aq) ⇄ 2 H+ (aq) + CO₃²- (aq)
Carbonic acid ionizes partially only to give hydrogen ions and trioxocarbonate (iv) ions. The unionized acid exists in equilibrium with the ions produced by the partial ionization of the acid.
Part B:
The reaction between hydrochloric acid and barium hydroxide is a neutralization reaction producing barium chloride salt and water.
The net ionic equation of the neutralization reaction is given below :
H+ (aq) + OH- (aq) ----> H₂O (l)
Can someone please help with these 2?
Equilibrium shifts to the right.
OPTION A
Look at pictures and help please
Answer: In order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.
Explanation:
More is the concentration of reactant molecules more will be the number of collisions between their molecules. As a result, more readily the products will be formed.
Hence, for the given reaction when concentration of HCl is increased then there will be increase in the number of collisions between reactants.
Thus, we can conclude that in order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.
A hard-water solution contains 4.8 g of calcium chloride. How much sodium phosphate in grams should be added to the solution to completely precipitate all of the calcium
Answer:
4.7 g
Explanation:
The reaction that takes place is:
3CaCl₂(aq) + 2Na₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6NaCl(aq)First we convert 4.8 g of CaCl₂ into moles, using its molar mass:
4.8 g ÷ 110.98 g/mol = 0.0432 mol CaCl₂Then we convert CaCl₂ moles into Na₃PO₄ moles, using the stochiometric coefficients of the balanced reaction:
0.0432 mol CaCl₂ * [tex]\frac{2molNa_3PO_4}{3molCaCl_2}[/tex] = 0.0288 mol Na₃PO₄Finally we convert 0.0288 moles of Na₃PO₄ into grams, using its molar mass:
0.0288 mol Na₃PO₄ * 164 g/mol = 4.7 gWhich of the following mixtures is best separated by the use of a separating funnel?
methane and water
ethyl ethanoate and water
ethanol and water
ethanoic acid and water
Answer:
ethyl ethanoate and water
Explanation:
At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.
Ethyl liquor and water are two miscible fluids. Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.
The answer is ethyl ethanoate and water. Hope this helps you!
You are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the ee of this solution
Answer:
ee = 96%
Explanation:
Enantiomeric excess, ee, is a way to express a mixture that is not enantiomerically pure. It is defined as 100 times the ratio between the differences of amounts of enantiomers and the total amunt. that is:
ee = |A-B|/ A+B * 100
ee = |98%-2%| / 98+2 * 100
ee = 96%What is the mass of 6 atom(s) of copper in grams?
Answer:
6.33×10¯²² g
Explanation:
From the question given above, the following data were obtained:
Number of atoms = 6 atoms
Mass of copper (Cu) =?
From Avogadro's hypothesis, we understood that:
6.02×10²³ atoms = 1 mole of Cu
But 1 mole of Cu = 63.5 g
Thus,
6.02×10²³ atoms = 63.5 g of Cu
Finally, we shall determine the mass of 6 atoms of copper. This can be obtained as illustrated below:
6.02×10²³ atoms = 63.5 g of Cu
Therefore,
6 atoms = (6 × 63.5) / 6.02×10²³
6 atoms = 6.33×10¯²² g of Cu
Therefore, the mass of 6 atoms of copper is 6.33×10¯²² g.
Phenols do not exhibit the same pka values as other alcohols; they are generally more acidic. Using the knowledge that hydrogen acidity is directly related to the stability of the anion formed, explain why phenol is more acidic than cyclohexane
Answer:
Phenols do not exhibit the same pka values as other alcohols;
They are generally more acidic.
Using the knowledge that hydrogen acidity is directly related to the stability of the anion formed, explain why phenol is more acidic than cyclohexane.
Explanation:
According to Bromsted=Lowry acid-base theory,
an acid is a substance that can release [tex]H^{+}[/tex] ions when dissolved in water.
So, acid is a proton donor.
If the conjugate base of an acid is more stable then, that acid is a strong acid.
In the case of phenol,
the phenoxide ion formed is stabilized by resonance.
[tex]C_6H_5OH -> C_6H_5O^- +H^+[/tex]
The resonance in phenoxide ion is shown below:
Whereas in the case of cyclohexanol resonance is not possible.
So, cyclohexanol is a weak acid compared to phenol.
The mass percent of element X
in X(NO3)2 is 52.55%.
Chemical analysis of a pure
sample of X(NO3)2 shows that
it contains 67.50 g of element
X. What is the total mass of
the pure sample?
Answer:
128.4 g
Explanation:
Step 1: Given data
Mass percent of element X in X(NO₃)₂: 52.55%Mass of the element X in the sample: 67.50 gStep 2: Determine the total mass of the sample
The mass percent of element X in X(NO₃)₂ is 52.55%, that is, there are 52.55 g of X every 100 g of X(NO₃)₂. Then, the mass of X(NO₃)₂ that contains 67.50 g of X is:
67.50 g X × 100 g X(NO₃)₂/52.55 g X = 128.4 g X(NO₃)₂
What is its density in kilograms per cubic meter?
Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.
HOPE IT HELPS❤️
State three natural conditions under which plasmolysis could occur
Answer:
When the cell is placed in salt solutionWhen leave celss dryWhen cells are placed in sugar solutionExplanation:
Hope this helps
The diagram shows an experiment. damp litmus paper gas given off mixture of ammonium chloride and sodium hydroxide 1 heat What is the name of the gas and the final colour of the litmus paper? gas colour A ammonia blue B ammonia red с chlorine white D chlorine red plz guys help me
Answer:
The correct answer is - A. ammonia blue.
Explanation:
It is given that there is a mixture of ammonium chloride and sodium hydroxide and if we heat the Mixture of NH4Cl and NaOH then, the following reaction will take place-
NH4Cl (aq)+ NaOH (aq)==> NaCl (aq) + NH3 (g)+ H2O (l)
In this reaction, there is a release of NH3 gas which is absorbed on litmus paper. We know that NH3 gas is basic in nature and so it will turn litmus paper blue.
Thus, the correct answer would be - NH3 (ammonia ) and Blue
Washes and extractions are both techniques that use a separatory funnel to separate liquid layers. However, washes and extractions have differences. Determine whether each statement applies to washes or extractions.
Leaves impurities in their starting layer Choose...
Moves impurities from one layer to another Choose...
Moves desired compound from one layer to another Choose...
Often involves a reaction in one of the layers Choose...
Leaves desired compound in its starting layer Choose...
Answer:
Leaves impurities in their starting layer - Extraction Moves impurities from one layer to another - Wash Moves desired compound from one layer to another - Extraction Often involves a reaction in one of the layers - Extraction Leaves desired compound in its starting layer - WashExplanation:
Both extraction and wash are technical materials separation processes. Both seek to carry out a separation of liquid-liquid, through the relationship between solvent and solute present in this solution. Both use a separation funnel and are very similar processes where the main difference is the purpose that each one seeks to exercise. The extraction causes the dissolution of the material that the researcher wants to leave behind. this process leaves impurities in the initial solution layer and moves the researcher's desired compound to the second layer of solution. A chemical reaction can take place during this process.
A wash, on the other hand, dissolves all impurities from the solution and extracts the compound desired by the researcher. Therefore, we can conclude that during this process the impurities are moved from one layer to another in the solution until it is discarded from the funnel, leaving the desired compound in the initial layer.
