Answer:
cells arose from preexisting cells
Explanation:
Rudolph Virchow is a German biologist that built on the work of other scientists such as Theodor Schwan to contribute his own quota to the development of the cell theory as it is currently known.
After several studies, Virchow rejected the idea of spontaneous generation and accepted the initially rejected idea of cell division. He earlier believed that cell division only takes place is some special type of cells and not in all cells.
Even though Virchow was not the first to bring the idea of cells arising from preexisting cells, he was the one that popularized the idea and added it to the earlier belief that all living organisms are made up of cells.
Answer:
B
Explanation:
A chemical equation is balanced when Group of answer choices the number of atoms of each element is the same in reactants and products. the charge on each atom is the same in reactants and products. the sum of the coefficients of the reactants is equal to the sum of the coefficients of the products. the total number of ions is the same in reactants and products. the total number of molecules is the same in reactants and products.
Answer:
a
Explanation:
A chemical equation is said to balanced only when the number of atoms of each element is the same in both reactants and products side. Rest all options are absurd. Hence, option a is correct.
Balancing of the reaction has no relation with coefficient, molecules or charge of the elements
You work in the special effects department of a movie studio. You are
currently working on a superhero movie where the hero is very strong
and can punch through metal. For the next scene you need to replace a
6 inch by 6 inch square of a metal wall with a different material that will
crumble when the actor hits it. What could you use?
A. You could use Carbon(C)
B. You could use Potassium (k)
C. You could use Titanium (T)
D. You could use Manganese (Mn)
Answer:
The correct option is;
D. Manganese (Mn)
Explanation:
Manganese is very brittle, hard, iron like silvery-gray metal, that is difficult to melt. In air, Manganese slowly disintegrate in a similar manner to iron rusting in water
Manganese and iron have similar chemical and physical properties however manganese is more harder and more brittle than iron
A brittle material is one that easily breaks without deforming elastically
Therefore, manganese, due to its very iron like appearance and brittle nature will be suitable to replace the metal wall and crumble easily when the actor hits it.
If alkali A has a pH value of 13 and alkali B has a pH value of 9, explain which is most likely to be used in indigestion tablets as a remedy for excess stomach acid. *
Answer:
Alkalai B
Explanation:
B because its a weak alkali ie baking soda ph 8.3(sodium bicarbonate)which is used as a remeady of heartburns and stomach acids.
Which bond type is found in ammonium chloride. Select one: a. metallic b. covalent c. ionic
Answer:
ionic
Explanation:
In NH4Cl molecule, ionic bond is formed between NH4+ and Cl– ions, 3 covalent bonds are formed between N and three H atoms and one coordinate bond is formed between N and 1 H atom.
HOPE IT HELPS :)
PLEASE MARK IT THE BRAINLIEST!
Answer:
[tex]\boxed{\sf c. \ ionic}[/tex]
Explanation:
NH₄Cl is formed by an ionic bond between NH₄⁺ and Cl⁻ ions.
NH₄Cl (solid) ⇒ NH4⁺ (aqueous) + Cl⁻ (aqueous)
The number of atoms in 2.0 moles of NaOH is _____ of 1.0 mole of H2O.
twice that
less than
more than
the same as
Answer:
The answer is the same as .
Explanation:
There are 3 atoms in NaOH, 1 sodium, 1 oxygen and 1 hydrogen.
There are 3 atoms in H2O, 2 hydrogen and 1 oxygen.
Please help me...
Atoms of elements X, Y and Z have 16, 17 and 19 electrons, respectively. Atoms of argon have 18 electrons.
a Determine the formulae of the compounds formed by the combination of the atoms of the elements:
(i) X and Z
(ii) Y and Z
(iii) X with itself.
b In each of the cases shown in
A (i)–(iii) above, name the type of chemical bond formed.
c Give two properties you would expect to be shown by the compounds formed in an (ii) and an (iii).
Answer:
a 1) XZ2
2) YZ
3) X2
b 1) Ionic bond
2) Ionic bond
3) covalent bond
c) ionic compounds has high melting and boiling point
ionic compounds can conduct electicity in aqueous form
covalent compounds have electrons shared between the atoms
covalent compounds have lower melting point compared to ionic compound
Answer:
(i) XZ = Potassium Sulfide [K2SO4]
(ii) YZ = Potassium Chloride [KCI]
(iii) X = Sulfur [S]
b) (i) Ionic Bond. (ii) Ionic Bond. (iii) Covalent Bond.
c) (i) Ionic compounds have high melting and boiling points.
(ii) Ionic compounds can conduct electricity in a molten state or a solution as they have ions that can move and carry charge.
(iii) Covalent compounds have low melting and boiling points.
(iv) Covalent compounds can not conduct electricity as all electrons are involved in bonding so there are no free electrons or ions to carry the charge.
Hope this is OK :))
Please mark me as Brainliest:))
A star is estimated to have a mass of 2.0 x 10 ^36kg. Assuming it to be a sphere of average radius of 7.0 x 10 ^5 km. Calculate the average density of the star in g/cm^3 and in lb/ft^3
Answer:
a) 1.392 x 10^6 g/cm^3
b) 8.69 x 10^7 lb/ft^3
Explanation:
mass of the star m = 2.0 x 10^36 kg
radius of the star (assumed to be spherical) r = 7.0 x 10^5 km = 7.0 x 10^8 m
The density of substance ρ = mass/volume
The volume of the star = volume of a sphere = [tex]\frac{4}{3}\pi r^{3}[/tex]
==> V = [tex]\frac{4}{3}*3.142*(7.0*10^8)^{3}[/tex] = 1.437 x 10^27 m^3
density of the star ρ = (2.0 x 10^36)/(1.437 x 10^27) = 1.392 x 10^9 kg/m^3
in g/cm^3 = (1.392 x 10^9)/1000 = 1.392 x 10^6 g/cm^3
in lb/ft^3 = (1.392 x 10^9)/16.018 = 8.69 x 10^7 lb/ft^3
4 examples of ionic bonding identifying in each one the anion, the cation and demonstrate the ionic bonding by means of the electronegativity difference.
Answer:
Here are some examples
Explanation:
NaCl
Cation = Na⁺, Anion = Cl⁻; ΔEN = |0.93 - 3.16| = 2.23
MgS
Cation = Mg²⁺, Anion = O²⁻; ΔEN = |1.31 - 3.44| = 2.53
KBr
Cation = K⁺, Anion = Br⁻; ΔEN = |0.82 - 2.96| = 2.14
CaF₂
Cation = Ca²⁺, Anion = F⁻; ΔEN = |1.00 - 3.98| = 2.98
In each case, ΔEN > 1.6, so the compound is ionic.
The recommended dose of aminophylline for children is 1.0 mg/kg/hr. 15 mL of a 30 mg/mL sltn is added to a 150 mL bottle of D5W. At what rate mL/hr should the injection be delivered to 35 lb child
Answer:
The answer is "6.68 [tex]\frac{ml} {hr}[/tex]".
Explanation:
It's going to be 18.18 kg to turn body mass to kg.
Size 1mg / kg / hr, therefore = 1 x 18.18
= 18.18 kg / hr
now we adding 30 mg / ml of dextrose = 30 x 15
[tex]=\frac{450mg}{15 ml +150 ml}[/tex]
of dextrose, from 15 ml to 150 ml;
Therefore, now 450 mg in 165m:
[tex]= \frac{ 450}{165}\\ \\=2.72 \frac{mg} {ml}[/tex]
now divide the 18.18 by 2.72:
[tex]=\frac{18.18}{2.72}[/tex]
= 6.68 [tex]\frac{ml} {hr}[/tex]
3.87 moles of iron bromide yielded10.4 moles of sodium bromide
Answer: 89.57 %
Hope it helps
H2SO4 is also called
a. king of acid
b. king of chemical
c. blue vitriol
d. Antacid
Answer:
[tex]\huge\boxed{King\ of \ Acid}[/tex]
Explanation:
H2SO4 (also called sulfuric acid) is also called King of Acids. It is a highly reactive acid.
Answer:
[tex]\large \boxed{\mathrm{a. \ king \ of \ acid }}[/tex]
Explanation:
[tex]\sf H_2SO_4[/tex] or sulfuric acid is known as the king of acid. It is a very reactive acid and is a strong acid in general.
Explain the different between a molecule and a compound.
Answer:
-A molecule is the smallesr part is compound whereas a compound is the combination of two or more atoms in a fixed proportion by wiehgt.
- A glass of water is an example of compound but a small portion of water can be called molecule.
Identify the type of energy described in each sentence. Tiles gravitational energy mechanical energy chemical energy electrical energy thermal energy nuclear energy radiant energy Pairs The body stores lipids ingested as fat and uses this energy when needed. arrowBoth (answer) A person's hat falls off and lands on the ground. arrowBoth (answer) A wave of water pushes a surfer to shore. arrowBoth (answer) A burner on a stove heats up a tea kettle. arrowBoth (answer) A power plant splits atoms to generate power for a city. arrowBoth (answer) A nerve sends an impulse to another nerve. arrowBoth (answer) A plant absorbs the Sun's rays to start the process of photosynthesis. arrowBoth (answer)
Answer:
The body stores lipids ingested as fat and uses this energy when needed-chemical energy
A person's hat falls off and lands on the ground- gravitational energy
A wave of water pushes a surfer to shore- mechanical energy
A burner on a stove heats up a tea kettle- thermal energy
A power plant splits atoms to generate power for a city- nuclear energy
A nerve sends an impulse to another nerve- electrical energy
A plant absorbs the Sun's rays to start the process of photosynthesis- radiant energy
Explanation:
Gravitational energy is energy stored by an object as a consequence of its height.
Mechanical energy is the energy that is possessed by an object due to its motion or due to its position.
Chemical energy refers to energy stored in chemical bonds in a substance.
Thermal energy is a form of energy that exists due to temperature difference between two bodies.
Nuclear energy refers to energy stored in the nucleus of an atom.
Electrical energy is a form of energy resulting from the flow of electric charge.
Radiant energy refers to energy that moves through vacuum without passing through a material medium.
Lab Safety Rule #3 says to always add acids or bases to the solvent and NEVER the other way around true or false?
Answer:
true
Explanation:
The standard laboratory rule is to always add acids or bases to solvent and not the other way round.
The dissolution of concentrated acids/bases in solvents (water) generates heat energy. Thus, if the solvent is added to them, a layer of hot weak acid or base will be formed and this will boil and spray around, causing an explosion.
On the other hand, if acid/base is added to solvents, they flow into the solvents and get diluted immediately without any boiling taking place. Hence, it is safe to add acid/base to solvents and not the other way round.
Was is meant by the term suprenatural? Does science deal with the supernatural?
A. The term supernatural literally means (within nature) Science deals with the supernatural because it works within nature, not above it
B. The term supernatural literally means (above nature) Science does not deal with the supernatural because it works within nature, not above it
C. The term supernatural literally means (within nature) Science does not deal with the supernatural because it works above nature, not within it
D. The term supernatural literally means (above nature) Science deals with the supernatural because it also works with nature, not within it
Answer:
it's option D
Levi decides to examine the effect of fertilizer on the growth of tomato plants. He chooses four plants for his experiment and applies varying amounts of fertilizer to three of them. He does not apply fertilizer to one plant. Over a 15-day period, the plants receive fertilizer on Days 1, 4, 7, 10, and 13. Levi measures the height of all of his plants with a meter stick on days 3, 6, 9, 12, and 15. He also makes sure to hold all experimental factors constant except for the fertilizer.
Where should the independent and dependent variables of Levi's experiment be placed when graphed?
Select all that apply.
the amount of fertilizer;y-axis
plant height;x-axis
the amount of fertilizer;x-axis
plant height; y-axis
Answer:
the amount of fertilizer; x-axis
plant height; y-axis
Explanation:
The independent and dependent variables of Levi's experiment placed when graphed are the amount of fertilizer and the y-axis. Option B is correct.
What are independent and dependent variables?The independent variables are those which are not dependent on other factors for their working or cannot be influenced by any other factor and the dependent variable is just the opposite of this one.
The experiment depends on the height of the plant but the fertilizer is independent of to work of the plant and fertilizer is independent and high and depends on other factors.
Therefore, Option B is correct. independent and dependent variables of Levi's experiment placed when graphed are the amount of fertilizer and the y-axis.
Learn more about independent and dependent variables, here;
https://brainly.com/question/1479694
#SPJ2
Which of the following processes is exothermic? Group of answer choices Allowing meat to thaw after taking it out of the freezer Popsicle melting on a warm summer day Boiling water in a beaker to convert it to steam Rolling a ball up a hill Reacting hydrogen and oxygen gases to make water
Answer:
Reacting hydrogen and oxygen gases to make water
Explanation:
Exothermic means that energy is released into the environment, so let's go through the process of elimination.
Allowing meat to thaw after taking it out of the freezer - NO it is endothermic, and takes energy/heat from the environment to thaw.
Popsicle melting on a warm summer day - NO also endothermic, the opposite of exothermic.
Boiling water in a beaker to convert it to steam - NO because we need to add heat, so it doesn't release any energy.
Rolling a ball up a hill - NO, for a ball to roll up a hill, it needs energy from something else, so it's not exothermic.
Reacting hydrogen and oxygen gases to make water - YES this reaction makes new bonds, which releases energy, so this is exothermic.
Among the following choices reacting hydrogen and oxygen gases to make water is an exothermic reaction as it releases energy as new bonds are formed.
What is an exothermic reaction?An exothermic reaction is defined as a chemical reaction which involves release of energy in the form of light,heat .In these reactions, energy is transferred from system to surroundings rather than taking energy from surroundings into system as in endothermic reactions.
In an exothermic reaction,change in enthalpy is negative.Therefore, it can be inferred that net amount of energy which is required to start the exothermic reaction is less than the net amount which is released by the reaction.
Examples of exothermic reactions are combustion reactions, detonation of nitroglycerin , neutralization reactions and nuclear fission.
Learn more about exothermic reactions,here:
https://brainly.com/question/10373907
#SPJ2
If the molarity of sugar is 1.1, what will the freezing point be?
Answer:
The freezing point will be -2.046°C.
Explanation:
The freezing point depression equation is [tex]\Delta T_f = k_f \cdot m \cdot i[/tex]
Where;
[tex]\Delta T_f[/tex] = The temperature depression of the freezing point
[tex]k_f[/tex]= The constant of freezing point depression which is solvent dependent = 1.86°C/m
i = The number of particles the substance decomposes into in solution = 1 for sugar (a covalent compound)
m = The molality of the solution = 1.1
Therefore, we have;
[tex]\Delta T_f = 1.86 \times 1.1 \times 1 = 2.046 ^{\circ}C[/tex]
Therefore the freezing point will be 0 - 2.046°C = -2.046°C.
Why does science need to.change its view on ideas overtime?
Explanation:
A scientific idea is an explanation for how something works, or the truth about some aspect of the world, that was figured out using the scientific process. ... Scientific ideas change over time as the evidence improves. The more experiments they do , and the more data they collect, the better the scientific ideas become.
What is Mendeleev’s Periodic Law? How many elements were classified by Mendeleev?
Answer:
1.the law that the properties of the elements are periodic functions of their atomic numbers. Also called Mendeleev's law. (originally) the statement that the chemical and physical properties of the elements recur periodically when the elements are arranged in the order of their atomic weights.
Explanation:
2.Mendeleev’s Periodic Law states that the properties of elements are the periodic function of their relative atomic masses. Mendeleev arranged all 63 elements; which were discovered till his time; in the order of their increasing relative atomic masses in a tabular form. It is known as Mendeleev’s Periodic Table.
Ytu perform an electrolysis reaction using FeCl, iron (1) chloride. Which of the following will happen?
A. Chlorine will move to the positive electrode and become reduced.
B. Iron will move to the positive electrode and become oxidized.
C. Chlorine will move to the negative electrode and become oxidized.
D. Iron will move to the negative electrode and become reduced.
Answer:
The answer is "Option B"
Explanation:
when we react with FeCl, iron, and chloride to both the electrolysis. So, iron is charged positive ion, as well as passes to the negative, is cathode electrode. But there is a decrease in the cathode.
The equation can be defined as follows:
[tex]FeCl_2[/tex] [tex]\longrightarrow[/tex][tex]Fe + Cl_2[/tex]
In the above equation, when the iron chloride electrolysis solution, it will give the iron(II) and the chlorine. This process happens when the hydrogen chloride solution at a temperature of about 90 ° C.
Answer: D
Explanation: As Fe is positive charged while chlorine is negative charged.
(D) is correct. As iron moves to negative and it get reduce as negative electrode is cathode
calculate the pH of 500cm3 of 0.2mol/dm3 Ca(OH2), assume complete ionisation
Answer:
The pH of 500 cm³, 0.2 mol/dm³, Ca(OH₂) is ≈ 13.6
Explanation:
The given parameters are;
Concentration of the calcium hydroxide, Ca(OH₂) = 0.2 mol/dm³
Volume of the calcium hydroxide, Ca(OH₂) = 500 cm³
Given that the calcium hydroxide, Ca(OH₂), undergoes complete ionization in water, complete dissociation, we have;
Ca(OH₂) ⇄ Ca²⁺ + 2 OH⁻
Therefore, we have;
2 moles of [OH⁻] for each mole of Ca(OH₂) which gives the concentration of [OH⁻] as
[OH⁻] = 2 × 0.2 ≈ 0.4 mol/dm³
The pH is given by the formula
pH = 14 + ㏒₁₀ [OH⁻]
pH = 14 + ㏒₁₀ (0.4) = 14 - 0.3979 = 13.6021 ≈ 13.6
The pH of the 500 cm³ 0.2 mol/dm³ Ca(OH₂) ≈ 13.6.
Consider the reaction of 2.5 grams of Li (s) reacting with 0.5 grams of N2 (g) to produce Li3N (s). A) How many total grams of Li3 N (s) would be produced? B) Which of the starting elements is the limiting reagent, and how many grams of the non-limiting reagent remain after the reaction has completed?
Answer:
A) The amount in grams of Li₃N produced is 1.243 g
B) N₂, is the limiting reagent
The mass of the non-limiting reagent, Li, remaining after the reaction is completed is 1.757 g
Explanation:
The given parameters are;
The mass of Li(s) = 2.5 grams
The mass of N₂ (g) = 0.5 grams
The chemical equation for the reaction can be presented as follows;
6 Li (s) + N₂ (g) → 2 Li₃N
Therefore, 6 moles of Li reacts with 1 mole of N₂ to produce 2 moles of Li₃N
The molar mass of Li = 6.941 g/mol
The molar mass of N₂ = 28.0134 g/mol
The number of moles of a reactant or product, n is given by the relation;
n = Mass of substance/(Molar mass of the substance)
For lithium, Li, n = 2.5/6.941 = 0.3602 moles
For Nitrogen gas, N₂, n = 0.5/28.0134 = 0.01785 moles
A) Given that 1 mole of N₂ to produces 2 moles of Li₃N
0.01785 moles of N₂ will produces 2×0.01785 = 0.0357 moles of Li₃N
The molar mass of Li₃N = 34.83 g/mol
The mass of Li₃N = 34.83 g/mol × 0.0357 moles = 1.243 g
B) 6 moles of Li reacts with 1 mole of N₂ to produce 2 moles of Li₃N
0.3602 moles will reacts with 1/6×0.3602 = 0.06003 mole of N₂
Therefore, N₂, is the limiting reagent and we have;
0.01785 moles of N₂ will react with 6×0.01785 = 0.1071 moles of Li
The number of of moles of Li left = 0.3602 - 0.1071 =0.2531 moles
The mass of lithium left = 0.2531 moles × 6.941 g/mol = 1.757 g
The mass of lithium remaining after the reaction is completed = 1.757 g.
What is the PRECAUTION for an Irritant?
pls balance the following chemical equation asap; Ca(OH)2 +CO2 = CaCO3+ H2O pls make it step by step
Answer:
Explanation:
Start by writing water as HOH
Ca(OH)2 +CO2 = CaCO3+ HOH
Next pay attention to the CO2 going to CO3
We need an oxygen.
Fortunately that is provided by the (OH)2
Now we have
Ca(OH)2 + CO2 ==> CaCO3 + HOH
and believe it or not, that is balanced as it is
The left side has 1 Ca. So does the right side
The Left side has 1 C. So does the right side.
The left side has 2 H. So does the right side
The left side has 2 oxygens (in Ca(OH2)) + 2 oxygens in CO2
So the equation is balanced.
If a gas displays a solubility of 0.00290M at a partial pressure of 125 kPa, what is the proportionality constant for this gas in this solvent and at this temperature?
Answer:
The proportionality constant ( Henry’s constant) = 2.32 * 10^-5 M/kPa
Explanation:
Here in this question, we are concerned with calculating the proportionality constant for this gas.
Mathematically, we can get this from Henry law
From Henry law;
Concentration = Henry constant * partial pressure
Thus Henry constant = concentration/partial pressure
Henry constant = 0.00290 M/125 kPa = 2.32 * 10^-5 M/kPa
write the formula of three compounds which you know and name the elements in them
Answer:
[tex]\boxed{\sf{view \ explanation}}[/tex]
Explanation:
Compound definition:
A compound is a chemical substance formed by two or more chemically bonded elements.
Three compounds:
Water is a compound with the formula [tex]\sf H_2O[/tex].
Two hydrogen atoms and one oxygen atom is present in one molecule of water.
Sodium chloride or table salt is a compound with the formula [tex]\sf NaCl[/tex].
One sodium atom and one chlorine atom is present in one molecule of sodium chloride.
Ammonia is a compound with the formula [tex]\sf NH_3[/tex].
In one molecule of ammonia, one nitrogen atom and three hydrogen atoms are present.
Answer:
See below
Explanation:
Three compounds are:
1) [tex]\mathrm {H_{2}SO{4}}[/tex] [Sulfuric acid]
The elements in this compound are hydrogen (H) , Sulfur (S) and Oxygen (O).
2) [tex]\mathrm {NaOH}[/tex] [Sodium hydroxide]
The elements in this compound are Sodium (Na) , Oxygen (O) and Hydrogen (H).
3) [tex]\mathrm {HCl}[/tex] [Hydrochloric acid]
The elements are Hydrogen (H) and Chlorine (Cl).
how to unscramble dtneinreigs
Answer:
Ingredients OR tenderising
Explanation:
Undulation in sandy material is called
cross-beds
ripple marks
mud cracks
O fossils
Answer:
ripple marks
Explanation:
Undulation is defined as the to and fro wavelike motion in a fluid or elastic medium.
Undulation in sandy material is called ripple marks because ripple marks are the sediments of rocks that show wavy structure at its surface due to agitation by water and wind.
Hence, the correct answer is "ripple marks".
In the molecule 4H2O2 the number of hydrogen atoms is what
Answer:
Scientists
Explanation:
Scientists because they are the one who makes hypothesis.
