Answer:
dunno
Explanation:
Suppose an astronaut floating in space throws a rock. What will happen to the rock?
what form of energy causes an ice cube to melt
A.mechanial
B.magnetic
C.sound
B.thermal
Answer:
Thermal
Explanation:
When something heats up its atoms become further apart making it melt when something heats up or gets heat or loses heat that's thermal energy
Which of the following is a pure substance?
pizza
pizza
salt (NaCl)
salt (NaCl)
air
air
sweet tea
sweet tea
Answer:
salt (NaCl)
Explanation:
Pure substance is defined as the substance that consist of a single type of material and does not contain contaminants. A pure substance has uniform composition throughout the process.
sodium chloride (NaCl) also known as table salt is a pure substance because it has a uniform and definite composition that is 1:1 ratio of sodium and chloride ions.
Hence, the correct answer is "salt (NaCl)".
In atomic solids where the lattice points are occupied by Group 8 ( 18) atoms, the atoms are held together by __________ forces.
Answer:
London dispersion forces
Explanation:
There are different forces of attraction that helps to hold atoms or Molecules of a particular substance together. Some of the forces of attraction are ionic/ electrovalent bond, covalent bond, vander waals forces of attraction and so on.
Under the vander waals forces of attraction we have what is known as the London dispersion forces. This force of attraction is a very weak and it is commonly found in the atoms of noble gases.
The intermolecular force of attraction in which we are talking about that is london dispersion forces is formed as a result of the formation of non-polar dipoles which are not permanent.
An ice cube melts on the warm sidewalk on a hot summer day. Let the entropies of the ice cube, of the pavement and of the ice cubesidewalk system be Sice, Ssw and Ssys. What happens to these entropies?
1. Sice increases, Ssw decreases, Ssys does not change.
2. Sice decreases, Ssw increases, Ssys decreases
3. Sice increases, Ssw decreases, Ssys increases
4. Sice increases, Ssw increases, Ssys increases
Answer:
3. Sice increases, Ssw decreases, Ssys increases
Explanation:
Entropy basically refers to the degree of disorderliness of a system.
Ice Cube --> As the ice cube melts, it undergoes a change in state of matter from solid to liquid hence it's entropy increases as the degree of movement of its molecules is more disordered in the liquid state.
This means the likely options are; 1, 3 and 4.
Sidewalk --> The entropy here decreases as the ice melts on the side walk. This is because there is a reduction in temperature. Entropy is directly proportional to temperature. Decrease in temperature leads to decrease in entropy.
This means the likely option is 1 and 3
The net entropy change of the system is however positive.
At what velocity (m/s) must a 19.9 g object be moving in order to possess a kinetic energy of 1.0 J
Answer:
Explanation:
T
Answer:
for this one you would have to divide 19.9g by the kinetic energy 1.0 and you would get your answer.
Explanation:if you would give me brainiest that would help a lot :)
PLEASE HURRY!!! I WILL GIVE BRAINLEIST!!!!
Study the diagram of a cell. Which structures are found in both plant and animal cells? W and X W and Z X and Y O Y and Z XN Y -W
Answer:
A I did the exam and I saw A sorry if it is wrong dont have the best of memory
How many formula units are 113.5 grams of Ca(OH)2
Answer:
Molecular Formula Ca(OH)2 or CaH2O2
Synonyms CALCIUM HYDROXIDE 1305-62-0 Slaked lime Hydrated lime Ca(OH)2
Molecular Weight 74.09 g/mol
Component Compounds CID 962 (Water) CID 5460341 (Calcium)
Explanation:
Explain how atoms organize to create larger structures?
Answer:
First of all they are super tiny particles of neutrons, electrons and protons. Then they come together to organize a structure of atom. Atoms come together to form a molecule and smaller molecules work together to form macromolecules. Thus, how they organize and form building blocks of a substance.
Hope it helps!<3
Percent yield is very important in terms of money. The higher the percent yield, the more of a product you can make. If you are working for a drug company and your theoretical yield is 120 kg, but you actually made 105 kg, what is your percent yield?
A. 8.75%
B. 114%
C. 87.50%
D. 15.00%
Answer:
87.5 %
Explanation:
Step 1: Given data
Theoretical yield: 120 kgReal yield: 105 kgStep 2: Calculate the percent yield
When working with chemical reactions, we can determine the efficience in obtaining a product measuring the percent yield. The theoretical yield is the maximum amount of product that we could obtain according to the stoichiometry, whereas the real yield is the amount of product that we actually obtain when we carry out the process. We can calculate the percent yield usign the following expression.
%yield = real yield / theoretical yield × 100%
%yield = 105 kg / 120 kg × 100%
%yield = 87.5 %
Chemicals that control weeds are called
A. acaricides.
B. herbicides.
C. insecticides.
D. pesticides.
Answer:
The answer is D
Explanation:
because insecticides are used for insects but pesticides are used to kill off unwanted plants
Answer:
B. herbicides
Explanation:
it kills weeds.
What is magnetism?
O a property of all rocks
O a property of all metals
O the force of attraction or
repulsion of magnetic materials
O a force that depends on mass and distance
Explanation:
I think it's the third one but I'm not sure
Answer:
The Answer for this is C
How many atoms of cadmium are in 2.50 moles
of cadmium?
2.50 moles Cd x
6.022 x 1023 atoms Cd
1 mol Cd
1 mole is equal to 6.023 × 10 ²³ molecules. 15.05 × 10²³ atoms of cadmium are in 2.50 moles of cadmium.
What do you mean by mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.
The mole concept can be used to convert between mass and number of particles.
1 mole of any substance = 6.023 × 10²³ molecules
Therefore, 1 mole of cadmium = 6.023 × 10²³ molecules
Then 2.50 moles of cadmium = 2.50 × 6.023 × 10²³
= 15.05 × 10²³ molecules
Thus, 15.05 × 10²³ atoms of cadmium are in 2.50 moles of cadmium.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ2
Select the correct definition below for the vocabulary term Oxygen
Answer:
Explanation:
We should be offered choices since you were offered some. However I will take a chance on what you should answer.
Oxygen is a non metal. Its most common charge is -2 which means that it has taken on two electrons. It is associated with fire and is an oxidizing agent which is a substance that will take on electrons). It is very reactive.
10 mL of a 0.65 M KMnO4 solution is diluted to a concentration of 0.055 M. What is the final volume of the diluted solution?
a. 20.0 mL
b. 0.846 mL
c. 108 ml
d. 118 ml
Answer:
118 mL
Explanation:
We can easily calculate the final volume of the solution (V₂) by applying the following mathematical expression:
V₁ x C₁ = V₂ x C₂
⇒ V₂ = V₁ x C₁/C₂
Given:
V₁ = 10 mL
C₁ = 0.65 M
C₂ = 0.055 M
We replace the data in the mathematical expression to calculate V₂:
V₂ = V₁ x C₁/C₂ = 10 ml x (0.65 M)/ (0.055 M) = 118.18 mL ≅ 118 mL
A metal ion uses d2sp3 orbitals when forming a complex. What is its coordination number and the shape of the complex?
Answer:
Octahedral
Explanation:
The idea of hybridization is a valence bond concept introduced by Linus Pauling and soon became an important explanation for the structure of molecules even in coordination chemistry.
Hybridization involves the mixing of orbitals of appropriate energy to form a new set of orbitals that are more suitable for bonding with ligands.
When one s, two d and three p orbitals are hybridized in complex formation, octahedral complexes are formed.
What is the net ionic equation for the acid-base reaction between chlorous acid and sodium hydroxide?
Answer: [tex]HCO_2(aq)+OH^-(aq)\rightarrow ClO_2^-(aq)+H_2O(l)[/tex]
Explanation:
Neutralization is a chemical reaction in which an acid and a base reacts to form salt and water.
Spectator ions are defined as the ions which does not get involved in a chemical equation or they are ions which are found on both the sides of the chemical reaction present in ionic form.
The reaction of chlorous acid (weak acid) and sodium hydroxide (strong base) is written as:
[tex]HClO_2(aq)+NaOH(aq)\rightarrow NaClO_2(aq)+H_2O(l)[/tex]
The equation can be written in terms of ions as:
[tex]HClO_2(aq)+Na^+(aq)+OH^-(aq)\rightarrow Na^+(aq)+ClO_2^-(aq)+H_2O(l)[/tex]
The ions which are present on both the sides of the equation are sodium ions and hence are not involved in net ionic equation.
Hence, the net ionic equation is :
[tex]HCO_2(aq)+OH^-(aq)\rightarrow ClO_2^-(aq)+H_2O(l)[/tex]
Someone took the last cookie from the cookie jar last night. The last person to leave the scene is the culprit. Who was it? Highlight the guilty culprit based on the clues provided.
true or false the human body system works together to maintain
Answer:
Im pretty sure it would be true
Explanation:
Cl2 +
NaBr
-
NaCl +
Br2
Answer:
hope this helps :)
Explanation:
Cl2 + NaBr = NaCl + Br2
NaCl + Br2 = NaBr + Cl2
8. Which is correct about kinetic energy?
As the kinetic energy increases gas molecules move slower
B. As the kinetic energy increases, the temperature of the gas increases
C. As the kinetic energy decreases, gas molecules move faster
D. As the kinetic energy decreases, the temperature of the gas increases
Answer:
is B
Explanation:
Part A: You are given a beaker containing a solution of an enzyme that hydrolyzes adenosine triphosphate (ATP) while it generates a lot of heat. You add a substantial amount of the sodium salt of ATP, and you measure the temperature of the beaker, and determine that nothing is happening. The enzyme is not performing the reaction. What is a reasonable chemical to add to the solution to get the enzyme to proceed with the hydrolysis of adenosine triphosphate?
Sulfur oxide,
Iron chloride,
magnesium chloride,
or add more sodium ATP.
Part B: You are investigating the reduction of oxygen that is performed by cytochrome c oxidase. As you start the reaction in a slightly acidic aqueous buffer with 2 mM Cu2SO4 and bubbling oxygen into the buffer. As the reaction proceeds, the solution slowly turns blue, what is happening?
a) Ozone is formed. This causes the solution to turn blue.
b) The copper is getting oxidized from Cu+ to Cu2+ and turns blue.
c) The cytochrome c oxidase protein is decomposing down to a blue product.
d) The pH of the solution is changing. Cu2SO4 is a pH indicator that turns blue when a solution becomes basic.
Part C: In the previous reaction, if you add a small amount of cyanide before adding the
Cu2SO4, the solution does not turn blue. What is a reasonable explanation?
a) The cyanide ion displaces the copper ions in the cytochrome c oxidase and stops the redox reaction.
b) The cyanide ion keeps the pH of the solution high. So the Cu2SO4 pH indicator does not show the decrease in pH.
c) The cyanide ion prevents the formation of ozone.
Answer:
1) magnesium chloride
2) b) The copper is getting oxidized from Cu+ to Cu2+ and turns blue.
Explanation:
The work published by David N. Frick, Sukalyani Banik, and Ryan S. Rypma in J Mol Biol. 2007 Jan 26; 365(4): 1017–1032 clearly shows that divalent metal ions of group 2 such as Mg^2+ play an important role in ATP hydrolysis. Addition of EDTA decreased the rate of hydrolysis of ATP (due to sequestration of the divalent ion of group 2) indicating an active participation of divalent ions in the process.
2) The copper I ion is colourless because it is a d^10 specie. However, when it is oxidized to Cu^2+, a blue colour appears in the solution.
If the gold in the crown was mixed with a less-valuable metal like bronze or copper, how would that affect its density?
Answer: If the gold in the crown was mixed with a less-valuable metal such as bronze of copper then this affects its density by making it to weigh even more and if it weighs more then it has less of chance to float. Observe: Drag each of the crowns into the liquid.
Explanation:
Density can be defined as the compactness of any substance. It is the mass/volume of a substance.
The density of gold is 19.3 g/ccThe density of copper is 9 g/ccThe density for bronze is 8.73 g/cc.Thus, if the gold crown is mixed with cheaper substances, such as bronze and copper, the density of the crown will decrease and it will become lighter.
https://brainly.com/question/24386693
A student is looking for an element to react with lithium to create the most vigorous reaction possible. To which direction on the periodic table should the student look?
A. Lower left
B. Upper left
C. Lower right
D. Upper right
Answer:
D. Upper right
Explanation:
The position the student should look for such element is in the upper right corner before the noble gases.
Specifically, the group of halogens will react vigorously with lithium.
Lithium is an electropositive metal. To attain stability, it must lose an electron. The group of halogens are a series of highly electronegative elements. They have 7 electrons in their outer shell and requires just one more to complete their octet. Therefore, they combine violently with halogensHalogens are found in the upper right corner on the periodic table.Answer:
D. Upper right
Explanation:
I had the exact same question
A rocket accelerates at 56 m/s2. It has a mass of 800,000 kg. Calculate the force (thrust) that the rocket engines must supply.
Answer:
4.5 × 10⁷ N
Explanation:
Step 1: Given data
Acceleration of the rocket (a): 56 m/s²Mass of the rocket (m): 800,000 kgStep 2: Calculate the force (F) that the rocket engines must supply
We can calculate the required force using Newton's second law of motion.
F = m × a
F = 800,000 kg × 56 m/s²
F = 4.5 × 10⁷ N
The required force is 4.5 × 10⁷ Newton.
What is the electron configuration for N (nitrogen)?
A. 1s22s23s23p1
B. 1s21p5
C. 1s22s22p3
D. 1s22s22p23s1
Explanation:
₇N = 1s² 2s² 2p³
Group = 15period = 2atomic mass = 14Hydride of Nitrogen = Ammoniavalency = 3Therefore,
Option C is correct ✔
which orbital has the highest energy level
Answer:
p orbitals
Explanation:
Which formula represents an empirical formula
O (1) CH,2
(2) C, H,
(3) CuH
O (4) CH
A compound with a formula mass of 45.08 g/mol is found to be 85.64% Carbon and the remainder Hydrogen. Find the molecular formula:
A sample of wax requires heat to melt and become a liquid. What type of process is this?
Question 12 options:
A)
Deposition
B)
Sublimation
C)
Exothermic
D)
Endotherm
Answer:
D) Endothermic
Explanation:
An endothermic reaction absorbs heat. In this case, the wax absorbs the heat and it melts.
Also, I took the exam and I got it right.
Answer:
Endothermic is correct
