Answers
Answer:
Option b, cosine.
Explanation:
Below you can see an image that illustrates this situation.
Remember that for a triangle rectangle with a given angle θ, we have:
Cos(θ) = (adjacent cathetus)/(hypotenuse)
In the image, you can see a vector of magnitude M, and the angle θ defined between the vector and the positive y-axis.
In this case, the y-component is the adjacent cathetus and the hypotenuse is the magnitude of the vector.
Then we will have:
Cos(θ) = (adjacent cathetus)/(hypotenuse) = y/M
solving that for y, we get:
y = Cos(θ)*M
Then the y-component is the vector's magnitude multiplied by the cosine of the angle between the vector and the y-axis.
The correct option is b.
Answer:
(b) cosine
Explanation:
In a 2-dimensional Cartesian coordinate system, a vector has a x-component and/or a y-component. To get these components, the magnitude of the vector is resolved with respect to the x-axis and the y-axis by multiplying it (the magnitude) by some trigonometric function with respect to the angle between the vector and the x or y axis.
For example, given a vector A of magnitude A which makes an angle α with the x-axis and an angle β with the y-axis, the x and y components of the vector A can be found as follows;
i. x-component is given by [tex]A_{x}[/tex]
[tex]A_{x}[/tex] = A cos α (with respect to the angle between A and the x-axis) or
[tex]A_{x}[/tex] = A sin β (with respect to the angle between A and the y-axis)
ii. y-component is given by [tex]A_{y}[/tex]
[tex]A_{y}[/tex] = A sin α (with respect to the angle between A and the x-axis) or
[tex]A_{y}[/tex] = A cos β (with respect to the angle between A and the y-axis)
Therefore, the y-component of a vector in a 2-dimensional Cartesian coordinate is given by the product of the magnitude of the vector and the cosine of the angle between the vector and the y-axis.
Related Questions
If you wanted to know how much the temperature of a particular piece of material would rise when a known amount of heat was added to it, which of the following quantities would be most helpful to know?
a. coefficient of linear expansion
b. specific heat
c. initial temperature
d. thermal conductivity
e. density
Answers
Answer:
Option (b) is correct.
Explanation:
The amount of heat required to raise the temperature of substance of mass 1 kg by 1 degree C, is called specific heat of the substance.
The formula of the specific heat is
H = m c (T' - T)
where, m is the mass, c is the specific heat and T' - T is the change in temperature.
So, to know the rise in temperature, by adding the known amount of heat, the specific heat is required.
So, option (b) is correct.
A factory worker pushes a 32.0 kg crate a distance of 7.0 m along a level floor at constant velocity by pushing horizontally on it. The coefficient of kinetic friction between the crate and floor is 0.26.
Required:
a. What magnitude of force must the worker apply?
b. How much work is done on the crate by this force?
c. How much work is done on the crate by friction?
d. How much work is done on the crate by the normal force? By gravity?
e. What is the total work done on the crate?
Answers
Answer:
(a) 81.54 N
(b) 570.75 J
(c) - 570.75 J
(d) 0 J, 0 J
(e) 0 J
Explanation:
mass of crate, m = 32 kg
distance, s = 7 m
coefficient of friction = 0.26
(a) As it is moving with constant velocity so the force applied is equal to the friction force.
F = 0.26 x m x g = 0.26 x 32 x 9.8 = 81.54 N
(b) The work done on the crate
W = F x s = 81.54 x 7 = 570.75 J
(c) Work done by the friction
W' = - W = - 570.75 J
(d) Work done by the normal force
W'' = m g cos 90 = 0 J
Work done by the gravity
Wg = m g cos 90 = 0 J
(e) The total work done is
Wnet = W + W' + W'' + Wg = 570.75 - 570.75 + 0 = 0 J
A cat with a mass of 5.00 kg pushes on a 25.0 kg desk with a force of 50.0N to jump off. What is the force on the desk?
Answers
Answer:
First of all the formula is F= uR,( force= static friction× reaction)
mass= 5+25=30
F= 50
R= mg(30×10)=300
u= ?
F=UR
u= F/R
u= 50/300=0.17N
A 10,000J battery is depleted in 2h. What power consumption is this? *
A) 5000W
B) 3W
C) 1.4W
D) 20000W
show your work please
Answers
Answer:
P = 1.4 W
Explanation:
Given that,
The work done or the energy of the battery, E = 10,000 J
Time, t = 2 h
We need to find the power consumption. Let it is P. Power is the rate of doing work. So,
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{10,000}{2\times 3600}\\\\P=1.38\ W[/tex]
or
P = 1.4 W
So, the power of the battery is 1.4 W.
We say that evaporation is a cooling process. (a) What cools and what warms? We say that condensation is a warming process. (b) What warms and what cools?
Answers
Answer:
a liquid warms gas cools
b solid piece warms and liquid cools
When you irradiate a metal with light of wavelength 433 nm in an investigation of the photoelectric effect, you discover that a potential difference of 1.43 V is needed to reduce the current to zero. What is the energy of a photon of this light in electron volts? energy of a photon: Find the work function of the irradiated metal in electron volts. work function:
Answers
Answer:
The right solution is:
(a) 2.87 eV
(b) 1.4375 eV
Explanation:
Given:
Wavelength,
= 433 nm
Potential difference,
= 1.43 V
Now,
(a)
The energy of photon will be:
E = [tex]\frac{6.626\times 10^{-34}\times 3\times 10^8}{433\times 10^{-9}}[/tex]
= [tex]4.59\times 10^{-19} \ J[/tex]
or,
= [tex]\frac{4.59\times 10^{-19}}{1.6\times 10^{-19}}[/tex]
= [tex]2.87 \ eV[/tex]
(b)
As we know,
⇒ [tex]Vq=\frac{hc}{\lambda}-\Phi_0[/tex]
By substituting the values, we get
⇒ [tex]1.43\times 1.6\times 10^{19}=\frac{6.626\times 10^{-34}\times 3\times 10^8}{433\times 10^{-9}}-\Phi_0[/tex]
⇒ [tex]\Phi_0=2.3\times 10^{-19} \ J[/tex]
or,
⇒ [tex]=\frac{2.3\times 10^{-19}}{1.6\times 10^{-19}}[/tex]
⇒ [tex]=1.4375 \ eV[/tex]
How does the density of water change when: (a) it is heated from 0o
C to
4o
C; (b) it is heated from 4o
C to 10o
C ?
Answers
Answer:
[b] it id heated from 4o
Explanation:
human activities that interfere with distribution of natural resources are contributing to the increase of earthquake risk.
Answers
Answer:
Changes in climate conditions, especially the warming of global temperatures increases the likelihood of weather-related natural disasters. ... This is most visible when seen through changes in the intensity and frequency of droughts, storms, floods, extreme temperatures and wildfires.
Answer :
A study published in the journal Seismological Research Letters this week identified 730 sites where human activity caused earthquakes over the past 150 years. And while we've long known that people can influence seismic activity, researchers were surprised to find that human activity has induced earthquakes with magnitudes as high as 7.9—and that the number of earthquakes is clearly rising in some regions of the world.
The effects of human-induced earthquakes may be similar to those created by nature, but are often seen in regions with little or no previous seismic activity. Most natural earthquakes happen along fault lines, which are commonly (but not exclusively) found where tectonic plates converge. But earthquakes triggered by human activity can occur far from the edges of tectonic plates.
Exactly what causes each induced earthquake depends on the type of human activity.
According to the report's data, found on a publicly accessible database, mining accounted for the highest number of human-induced earthquakes worldwide (many earthquakes clustered around 271 sites). The removal of material from the earth can cause instability, leading to sudden collapses that trigger earthquakes.
Multiple earthquakes at 167 sites—and by far the deadliest ones—were triggered by what the report calls water reservoir impoundment, or dam building. (See the power of dams and dam removal.)
In 2008, an estimated 80,000 people died or went missing following a 7.9 earthquake in China's Sichuan province. Scientists believe it was triggered by the weight of 320 million tons of water that had been collected in the Zipingpu Reservoir—over a well-known fault line.
In the U.S., the conversation around human-induced earthquakes has largely centered around fracking for oil and natural gas, given the rapid spread of the technology in many states. According to the U.S. Geological Survey, fracking can induce seismic activity, both directly and from disposing of wastewater used in the process—the byproduct of water, sand, and chemicals used to hydraulically fracture hydrocarbons from rock. That high-pressure wastewater can crack rocks and lubricate faults.
An airplane flies between two points on the ground that are 500 km apart. The destination is directly north of the point of origin of the flight. The plane flies with an airspeed of 120 m/s. If a constant wind blows at 10 m/s toward the west during the flight, what direction must the plane fly relative to the air to arrive at the destination
Answers
Answer:
The right solution is "4.8° east of north".
Explanation:
Given:
Distance,
= 500 km
Speed,
[tex]\vec{v}=120 \ m/s[/tex]
Wind (towards west),
[tex]v_0=10 \ m/s[/tex]
According to the question, we get
The angle will be:
⇒ [tex]\Theta=Cos^{-1}(\frac{v_0}{v_1} )[/tex]
[tex]=Cos^{-1}(\frac{10}{120} )[/tex]
[tex]=85.21[/tex] (north of east)
hence,
The direction must be:
⇒ [tex]\Theta'=90-85.21[/tex]
[tex]=4.79^{\circ}[/tex]
or,
[tex]=4.8^{\circ}[/tex] (east of north)
The sound from a trumpet radiates uniformly in all directions in 20C air. At a distance of 5.00 m from the trumpet the sound intensity level is 52.0 dB. The frequency is 587 Hz. (a) What is the pressure amplitude at this distance
Answers
Answer:
The answer is below
Explanation:
The intensity level (B) of a sound wave is given by:
B = 10log(I/I₀);
where I₀ is the threshold intensity = 1 * 10⁻¹² W/m², I is the intensity at distance 5 m, B is the intensity level = 52 dB
Substituting gives:
[tex]52=10log(\frac{I}{10^{-12}} )\\\\log(\frac{I}{10^{-12}} )=5.2\\\\I=1.58*10^{-7}\ W/m^2[/tex]
The pressure is given by:
[tex]I=\frac{p_{max}^2}{2\rho v} \\\\\rho=air\ density=1.2\ kg/m^3,v=speed\ of\ sound\ in\ air=344\ m/s,p_{max}=pressure:\\\\p_{max}=\sqrt{2\rho vI}=\sqrt{2*1.58*10^{-7}*1.2*344} =1.14*10^{-2}Pa[/tex]
At a playground, Maryam a 3-year old girl and Zahirah a 6-year old girl are playing with the swings. Maryam is sitting while Zahirah is standing on the swing. Both of them were given the same push by their mother. Choose the CORRECT statements:
A. Maryam is swinging faster than Zahirah.
B. Zahirah is swinging faster than Maryam.
C. Both swings at the same pace.
D. Maryam is swinging faster since she is younger.
E. Zahirah is swing faster since she is older.
Answers
Answer:
both swings at the same place
Explanation:
because there mother is giving same amount of force to both.
Calculate the terminal velocity of a rain drop of radius 0.12cm
Answers
Explanation:
Given that,
The radius of rain drop, r = 0.12 cm = 0.0012 m
The viscocity of air is, [tex]\eta=18\times 10^{-5}\ poise[/tex]
Let the viscous force is, [tex]F = 0.010173\ N[/tex]
The viscous force is given by :
[tex]F=6\pi \eta rv\\\\v=\dfrac{F}{6\pi \eta r}[/tex]
Put all the values,
[tex]v=\dfrac{0.010173}{6\pi 18\times 10^{-5}\times 0.0012 }\\\\v=2498.58\ m/s[/tex]
A circular wire loop is placed near a long, straight, current-carrying wire in which the current is either increasing or decreasing. Draw the situations in which the induced current in the loop counterclockwise?
Answers
Answer:
The induced current is counter clockwise if the current is decreasing and towards right.
Explanation:
When the current is decreasing in the wire, the direction of magnetic field at the center of the loop is outwards to the plane of paper which is given by the Maxwell's right hand thumb rule. The magnetic field is decreasing in nature.
So according to the Lenz's law, the induced current is such that which opposes the cause of its production, so that the induced current is counter clockwise.
On Ramesh’s13th birthday, his father invited all his friends and their relatives. It was a big party with lots of food and DJs. Ramesh didn’t like the loud sound of DJs and asked his father to play it in a low volume so that their neighbours do not get much disturbed and people at the party can also enjoy the music. Ramesh’s father felt good for his wisdom and did as he said.
→Do you think when loud music is played at a party is acceptable to all the people living in, neighbourhood? Give a reason for your answer
→How can you control noise pollution at your end?
Answers
Estimate the force a person must exert on a massless string attached to a 0.15 kg ball to make the ball revolve in horizontal circle of radius 0.6 m. The ball makes 2 revolutions per second.
Answers
Answer:
[tex]F = 14.2 N[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=0.15kg[/tex]
Radius [tex]r=0.6[/tex]
Angular Velocity [tex]\omega=2rev/s[/tex]
[tex]\omega= =2x2 \pi rad/s=>4 \pi rad/s[/tex]
Generally the equation for Force applied is mathematically given by
[tex]F =mrw2[/tex]
[tex]F=0.15*0.6* (4*x3.14^)2[/tex]
[tex]F = 14.2 N[/tex]
A temperature of 200 degrees Fahrenheit is equivalent to approximately A.93.3 degrees Celsius B. 232 degrees Celsius C. 37.8 degrees Celsius D. 840 degrees Celsius
Answers
Answer:
you can use G.oogle for this question.
Answer:
93.3 degrees Celsius.
Explanation:
A electron gains electric potential energy as it moves from point 1 to point 2. Which of the following is true regarding the electric potential at points 1 and 2?
a. V1 = V2
b. V1 > V2
c. V1 < V2
Answers
Answer:
We know that the change in electric potential energy is defined as:
q*ΔV = ΔP
So, the change in the electric potential energy is the charge times the change in the electric potential.
For the case of an electron gas, we have:
q = -e
where -e is the charge of an electron (remember that is negative).
So, if the electron gains electric potential then:
ΔP > 0
this means that the final potential energy is larger than the initial one, then we have:
-e*ΔV > 0
This means that ΔV must be negative.
V₂ = electric potential at point 2, so it is the final electric potential
V₁ = electric potential at point 1, so it is the final electric potential
Then we should get:
ΔV = V₂ - V₁ < 0.
This means that:
V₂ < V₁
The correct option is b.
explain how a lever can act as a force multiplier
Answers
Answer:
Example:Opening of a bottle cap by tool
when we hold a tool and open the bottle cap this is because , force x tool force .
The load arm is usually shorter than the effort arm in second order levers. Moving a large weight hence requires less effort. A force multiplier lever or effort multiplier lever is the name for this kind of lever. A boat's oars, for instance, can increase the force.
What is second order levers?Second-order levers are devices with the input force farthest from the fulcrum and the output force on the same side of the fulcrum. A wheelbarrow is an excellent illustration of a second-order lever.
A second-order lever will have an output force greater than an input force, similar to first-order levers. The output journey, however, will be shorter than the input length. Both the input and output forces in this situation will move in the same direction.
Learn more about lever here:
https://brainly.com/question/18937757
#SPJ2
Two parallel circular plates with radius carrying equal-magnitude surface charge densities of are separated by a distance of How much stored energy do the plates have? A. 120 B. 360 C. 12 D. 37
Answers
Answer:
I guess it is A. I am not sure
Which one is the dependent variable in distance, force, or work
Answers
Answer:
Distance
Explanation:
Work can be defined as the energy transferred to a physical object by exertion of a force on the object to cause a displacement of the object. Thus, work is typically done when a person or simple machine move an object over a distance through the application of a force.
Mathematically, work done is given by the formula;
[tex] W = F * d[/tex]
Where,
W is the work done
F represents the force acting on a body.
d represents the distance covered by the body.
A dependent variable is the event expected to change when an independent variable is manipulated.
Hence, distance is the dependent variable because its value changes with respect to the amount of force exerted on an object.
which describes a homogeneous mixture
Answers
Answer:
A homogeneous mixture is a type of mixture in which the composition is uniform and every part of the solution has the same properties. Example, air
Explanation:
A horizontal force is applied to a 4.0 kg box. The box starts from rest, moves a horizontal distance of 10.0 meters, and obtains a velocity of 7.0 m/s. The change in the kinetic energy is:_____.
Answers
Answer:
98 J
Explanation:
Applying,
Change in kinetic energy = Final kinetic energy- initial kinetic energy
ΔK.E = mv²/2-mu²/2..............Equation 1
Where ΔK.E = Change in kinetic energy, m = mass of the box, u = initial velocity of the box, v = final velocity of the box.
From the question,
Given: m = 4.0 kg, u = 0 m/s, v = 7 ,0 m/s
Substitute these values into equation 1
ΔK.E = (4(7²)/2)-(4(0²)/2)
ΔK.E = (2×49)-0
ΔK.E = 98 J
Hence the change in kinetic energy 98 J
A rock is thrown from the edge of the top of a 51 m tall building at some unknown angle above the horizontal. The rock strikes the ground a horizontal distance of 74 m from the base of the building 8 s after being thrown. Assume that the ground is level and that the side of the building is vertical. Determine the speed with which the rock was thrown.
Answers
Answer:
The speed of projection is 34 m/s.
Explanation:
Height of building, h = 51 m
horizontal distance, d = 74 m
time, t = 8 s
Let the angle is A and the speed is u.
d = u cos A x t
74 = u cos A x 8
u cos A = 9.25 .... (1)
Use second equation of motion
[tex]h = u sin A t - 0.5 gt^2\\\\-51 = u sinA \times 8 - 0.5\times 9.8\times8\times 8\\\\u sin A = 32.8 .... (2)[/tex]
Squaring and adding both the equations
[tex]u^2 = 9.25^2 + 32.8^2 \\\\u = 34 m/s[/tex]
Kinematics equations tells us the position of an object under constant acceleration increases linearly with time.
A. True
B. False
Answers
Answer:
False.
Explanation:
Suppose that we have an object that moves with constant acceleration A.
Then the acceleration of the object is defined by the equation:
a(t) = A
The acceleration is the rate of change of the velocity, then the velocity equation is given by the integration of the acceleration equation, we will get:
v(t) = A*t + V₀
Where V₀ is the velocity of the object at the time t = 0s.
Now, if we integrate it again, we will get the position equation:
p(t) = (1/2)*A*t^2 + V₀*t + P₀
Where P₀ is the initial position equation.
Here, we can see that the position equation is a quadratic equation (not a linear equation), then the statement is false.
A 2.2 kg, 20-cm-diameter turntable rotates at 80 rpm on frictionless bearings. Two 600 g blocks fall from above, hit the turntable simultaneously at opposite ends of a diagonal, and stick. What is the turntable's angular velocity, in rpm, just after this event?
Answers
Answer:
[tex]w_2=38.3rpm[/tex]
Explanation:
From the question we are told that:
Mass of turntable [tex]M=2.2kg[/tex]
Diameter of turntable [tex]d=20cm=>0.2m[/tex]
Angular Velocity [tex]\omega =80rpm[/tex]
Mass of Blocks [tex]M_b=600g=>0.6kg[/tex]
Generally the equation for inertia is mathematically given by
Initial scenario at \omega=80rpm
[tex]I_1=\frac{1}{2}mR^2[/tex]
[tex]I_1=\frac{1}{2}*2.2*0.1^2[/tex]
[tex]I_1=0.11kgm^2[/tex]
Final scenario
[tex]I_2=I_1+2mR^2[/tex]
[tex]I_2=0.011+(2*0.6*0.12)[/tex]
[tex]I_2=0.023[/tex]
Generally the equation for The relationship between Angular velocity and inertia is mathematically given by
[tex]I_1w_1=I_2w_2[/tex]
[tex]w_2=\frac{I_1 \omega}{I_2}[/tex]
[tex]w_2=\frac{0.011*80}{0.023}[/tex]
[tex]w_2=38.3rpm[/tex]
A charged particle accelerates as it moves from location A to location B. If VA = 260 V and VB = 210 V, what is the sign of the charged particle? positive negative (b) A electron loses electric potential energy as it moves from point 1 to point 2. Which of the following is true regarding the electric potential at points 1 and 2?
Answers
Answer:
(a) Positive
(b) Electron gains energy as it moves from A to B.
Explanation:
VA = 260 V
VB = 210 V
An electron moves from lower to higher potential which is negatively charged and a positively charged particle moves from higher to lower potential, so the charge particle is positive in nature.
(a) Positive
(b) No, electron gains energy as it moves from A to B.
A bullet of mass 0.5 kg is moving horizontally with a speed of 50 m/s when it hits a block of mass 3 kg that is at rest on a horizontal surface with a coefficient of friction of 0.2. After the collision the bullet becomes embedded in the block. How much work is being dne by bullet?
Answers
Answer:
Work done by the bullet is 612.26 J.
Explanation:
mass of bullet, m = 0.5 kg
initial velocity of bullet, u = 50 m/s
coefficient of friction = 0.2
mass of block, M = 3 kg
let the final speed of the bullet block system is v.
use conservation of momentum
Momentum of bullet + momentum of block = momentum of bullet block system
0.5 x 50 + 3 x 0 = (3 + 0.5) v
v = 7.14 m/s
let the stopping distance is
The work done is given by change in kinetic energy of bullet
initial kinetic energy of bullet, K = 0.5 x 0.5 x 50 x 50 = 625 J
Final kinetic energy of bullet, K' = 0.5 x 0.5 x 7.14 x 7.14 = 12.74 J
So, the work done by the bullet
W = 625 - 12.74 = 612.26 J
calculate the electric potential 3mm from a point charge of 16Nc
Answers
[tex]4.8 \times 10^8[/tex] volts
Explanation:
The electric potential due to a point charge is given by
[tex]V= \dfrac{1}{4 \pi \varepsilon_{0}} \dfrac{Q}{r}[/tex]
where Q = charge = [tex]16 \times 10^{-9}[/tex] C
r = distance from a point = [tex]3 \times 10^{-3}[/tex] m
[tex]\varepsilon_{0}[/tex] = permitivity of free space
= 8.85×10^-12 C^2/N-m^2
Plugging in the numbers,
[tex]V = \dfrac{1}{4 \pi (8.85 \times 10^{-12})} \dfrac{16 \times 10{-9}}{3 \times 10^{-3}}[/tex]
[tex]= 4.8 \times 10^8[/tex] volts
A man standing on a frictionless ice throws a 1.00kg mass at 20m/s at an angle elevation of 40.0 degrees. What was the magnitude of the mans momentum immediately after the the throl
Answers
Answer:
Explanation:
1.00kg×20m/s×cos40=15.3
Convert Rev/min to rad/s x 2pie/60?
Anyone knows this please?
Answers
Answer:
Thus, [tex]\frac{1 rev}{min} =\frac{2\pi}{60} rad/s[/tex]
Explanation:
The angular speed is defined as the rate of change of angular velocity.
Its SI unit is rad/s and other units are rev/min or rev/s.
[tex]\frac{1 rev}{min } = \frac{1 rev}{60 sec}\\\\1 rev = 2\pi rad\\\\So\\\\\frac{1 rev}{min} = \frac{2\pi}{60} rad/s[/tex]
