in a batch of 10,000 clock radios 500 are defective. A sample of 10 clock radios is randomly selected without replacement from the 10,000 and tested. The entire batch will be rejected if at least one of those tested is defective. what is the probability that the entire batch will be rejected?

Cold fronts generally move faster than warm fronts because cold air is denser and thus, moves more quickly. Precipitation with a cold front typically covers a broader area, especially during the winter.

On the other hand, warm fronts move more slowly as they are characterized by the gradual lifting of warm air over colder air. Cold fronts also typically have steeper slopes than warm fronts. This is because the leading edge of a cold front is more abrupt.

With a steep rise in the cold air mass. In contrast, the leading edge of a warm front has a gentler slope as the warm air gradually rises over the colder air.

To learn about Precipitation visit:

https://brainly.com/question/18109776

#SPJ4

Answer:

if u want total price then,

=Rs.35×80=Rs.2800

On the fifth day there were 4 tοmatοes left tο be sοld. Jοann had 71 tοmatοes tο begin with.

Prοbability is a measure οf the likelihοοd οr chance οf an event οccurring. It is a number between 0 and 1, where 0 indicates that the event is impοssible, and 1 indicates that the event is certain tο οccur.

Let's wοrk backwards frοm the last day and figure οut hοw many tοmatοes Jοann had οn the fοurth day.

On the fifth day, there were 4 tοmatοes left tο be sοld, which means she sοld half οf what was left οn the fοurth day. Sο she must have started with 8 tοmatοes οn the fοurth day (since half οf 8 is 4).

On the fοurth day, she sοld half οf what was left, which means she had 16 tοmatοes befοre she sοld any.

On the third day, she sοld 12 tοmatοes, which means she had 28 tοmatοes befοre she sοld any.

On the secοnd day, she sοld half οf what was left, which means she had 56 tοmatοes befοre she sοld any.

Finally, οn the first day, she sοld 15 tοmatοes.

Therefοre, Jοann had 71 tοmatοes tο begin with.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

The missing side is 30.

Three line segments that cross at three non-collinear locations to form a triangle constitute a triangle in geometry. The triangle's three line segments are referred to as its sides, and its three points of intersection as its vertices.

A triangle is a three-sided polygon formed by three line segments intersecting at three non-collinear points, and it can be classified based on the length of its sides and the measure of its angles.

Given figure, there are two lines ate parallel, that's why two triangles are similar triangle.

Assume that the missing side is x.

So that side ratio in similar triangle are equal;

14/20 = 21/x

So, x = 30.

Therefore, the missing side x is 30

To know more about triangle, visit:

https://brainly.in/question/17424774

#SPJ1

Triangle Three line segments that cross at three non-collinear locations to form a triangle constitute a triangle in geometry. According to the question the missing side is 30.

Three line segments that cross at three non-collinear locations to form a triangle constitute a triangle in geometry. The triangle's three line segments are referred to as its sides, and its three points of intersection as its vertices. A triangle is a three-sided polygon formed by three line segments intersecting at three non-collinear points, and it can be classified based on the length of its sides and the measure of its angles.

Given figure, there are two lines ate parallel, that's why two triangles are similar triangle.
Assume that the missing side is x.
So that side ratio in similar triangle are equal;
14/20 = 21/x

So, x = 30.
Therefore, the missing side x is 30

To know more about triangle, visit:
https://brainly.com/question/1058720
#SPJ1

Answer:

m = -5/8

Step-by-step explanation:

Slope = rise/run or (y2 - y1) / (x2 - x1)

Points (-1, -7) (-9, -2)

We see the y increase by 5 and the x decrease by 8, so the slope is

m = -5/8

To find the slope of a line that passes through two points, you can use the slope formula. The slope formula is:

Slope = (y2 - y1) / (x2 - x1)

Using the points given in your question, the slope formula to find the slope of the line is:

Slope = (2 - 8) / (4 - (-4))

Using the order of operations, the calculation of the slope formula is as follows:

Slope = -6 / 8

Therefore, the slope of the line passing through (-4, 8) and (4, 2) is -3/4.

a) The drawing of all data points on a 2D plane is illustrated below.

b) The angle in between the five other points is 27

c) The matrix outer product for X is R = XXT.

d) The matrix outer product can also be calculated via R is (2,27)

The data matrix X is a 2-by-7 matrix, where each column represents a data point with two components. We can visualize each data point as a vector in a two-dimensional plane, where the horizontal axis represents the first component and the vertical axis represents the second component.

To draw all data points on a 2D plane, we can plot each column of X as a vector starting from the origin. Proper labeling of the two axes and providing important tick values will facilitate a precise graphical description of the data.

Next, we can use the inner product formula to calculate the angle between the first data point (2, 27) and the other five data points, respectively.

The inner product, also known as the dot product, is a way to measure the similarity between two vectors by multiplying their corresponding components and summing the products.

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

As all the sides of the closed figure are equal to each other, the quadrilateral here is a square.

A square is a closed, two-dimensional (2D), object with four corners. With four sides and four vertices, a quadrilateral is referred to as a square. All four sides of a square are equal and parallel.

In other words, a square is a polygon or quadrilateral with four sides. An equiangular quadrilateral is a shape in which all of the angles are of equal size.

Here in the given figure, we can see a quadrilateral is given.

We can see that all the sides of the quadrilateral are given to be equal to each other.

We can conclude from the observation that the quadrilateral is a square as the sides are all equal to each other.

To know more about squares, visit:

https://brainly.com/question/16865200

#SPJ1

As a result, both varieties of trees will be the same height after 9 years. We can change both equations to a = 9 to verify this: Height of the type A tree is 36 + 8(9) or 36 + 72 inches, whereas the height of the type B tree is 18 + 10(9) or 18 + 90 inches.

Trigonometry includes heights and distances, and it has numerous uses in practical daily life. It utilised to compute height of towers, structures, mountains, etc., and distance between any two objects such celestial bodies others. ,sys,s tos.as to .... and.

Let's use "a" to denote the number of years after planting the trees.

A type A tree will reach the following height after "a" years:

Height of type A tree = 36 + 8a

After "a" years, the height of a type B tree will be:

Height of type B tree = 18 + 10a

We must set the two types of trees' heights equal to one another and solve for "a" to determine when they will reach the same height:

36 + 8a = 18 + 10a

Subtracting 8a from both sides, we get:

36 = 18 + 2a

Subtracting 18 from both sides, we get:

18 = 2a

Dividing both sides by 2, we get:

a = 9

Therefore, after 9 years, both types of trees will be the same height.

To check this, we can substitute a = 9 into both equations:

Height of type A tree = 36 + 8(9) = 36 + 72 = 108 inches

Height of type B tree = 18 + 10(9) = 18 + 90 = 108 inches

To know more about height visit:-

https://brainly.com/question/27996736

#SPJ1

Question:

You have two types of trees to plant in your yard: type A trees are 36 inches tall and grow 8 inches per year, while type B trees are 18 inches tall and grow 10 inches per year. At what point in time will the trees be the same height? How tall will the trees be at that time?

The probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle is 0.25 or 25%

What is Conditional probability?

Conditional probability is the probability of an event occurring given that another event has occurred or is known to have occurred. It is denoted by P(A|B), which reads as "the probability of A given B."

The formula for conditional probability is:

P(A|B) = P(A and B) / P(B)

where P(A and B) is the probability of both events A and B occurring, and P(B) is the probability of event B occurring.

The total number of Plastic #2 bottles is 8 (correctly placed) + 5 (incorrectly placed) = 13.

The total number of Plastic #4 bottles is 5 (correctly placed) + 2 (incorrectly placed) = 7.

The probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle is given by:

(number of Plastic #4 bottles correctly placed) / (total number of bottles)

So the probability is:

5/20 = 1/4 = 0.25

Therefore, the probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle is 0.25 or 25%.

To learn more about Conditional probability, visit the link:

https://brainly.com/question/10739997

#SPJ1

Answer:

The smallest possible average of five distinct positive even integers will occur if we choose the five smallest even integers. Since we want the integers to be distinct, we start with 2 and add the next four even integers:

2, 4, 6, 8, 10

The average of these five integers is:

(2 + 4 + 6 + 8 + 10) / 5 = 30 / 5 = 6

Therefore, the smallest possible average of five distinct positive even integers is 6, which is answer choice C.

The population of interest is the group of students who submitted an application to the college in 2017.

A sample is a subset of a population that is selected and studied in order to make inferences or conclusions about the population. The sample is usually selected to be representative of the population in some way, so that the conclusions drawn from the sample can be generalized to the population as a whole.

The correct answer is C.

The purpose of the study is to determine why students who are interested in the college decide to enroll or not. Therefore, the population of interest is the group of students who submitted an application to the college in 2017.

To know more about sample visit:

https://brainly.com/question/11045407

#SPJ1

The required value of TV is 2 units.

A parallelogram is a straightforward quadrilateral with two sets of parallel edges in Euclidean geometry. A parallelogram's confronting or opposing sides are of equal length, and its opposing angles are of equal size.

We have given that;

TW = y²

WV = 2y − 1

We know that in parallelogram

TW = WV

y² = 2y − 1

y² - 2y + 1 = 0

y² - y - y + 1 =0

y(y - 1)-1(y - 1) = 0

(y - 1)(y - 1) = 0

(y - 1)² = 0

y - 1 = 0

y = 1

So;

TV = TW + WV

TV = y² + 2y − 1

TV = 1² + 2(1) - 1

TV = 1 + 2 - 1

TV = 2 units

Thus, required value of TV is 2 units.

To know more about parallelogram visit:

brainly.com/question/29147156

#SPJ1

If Andres Michael bought a new boat. He took out a loan for $24,420 at 3.5% interest for 2 years. Andres Michael owes $18806.6 at maturity.

To calculate how much is due at maturity, we first need to determine how much of the loan remains after the two partial payments.

To do this, we can use the formula for simple interest:

I = P * r * t

Where:

I = Interest

P = Principal (original loan amount)

r = Annual interest rate

t = Time (in years)

The interest for the first two months can be calculated as:

I1 = P * r * t1

= 24420 * 0.035 * (2/12)

= 142.45

So after the first two months, the amount owing on the loan is:

P1 = P + I1 - 4330

= 24420 +142.45 - 4330

= 20,232.45

The interest for the next four months can be calculated as:

I2 = P1 * r * t2

= 20,232.45 * 0.035 * (4/12)

= 236.05

So after six months, the amount owing on the loan is:

P2 = P1 + I2 - 2600

=  20,232.45 + 236.05- 2600

= 17868.50

Now we can calculate the interest for the remaining 18 months:

I3 = P2 * r * t3

=  17868.50* 0.035 * (18/12)

= 938.10

So the total amount owing at maturity (after 2 years) is:

Total amount owing = P2 + I3

=  17868.50 + 938.10

= 18806.6

Therefore, Andres Michael owes $18806.6 at maturity.

Learn more about amount owes here:https://brainly.com/question/29640344

#SPJ1

Answer:

D.

Step-by-step explanation:

To calculate the actual distance in km, we need to use the scale factor of 1:100 000. This means that 1 cm on the map is equivalent to 100 000 cm in real life.

Therefore, 12.3 cm on the map is equivalent to 12.3 x 100 000 cm in real life.

Now, 1 km is equivalent to 100 000 cm.

Therefore, 12.3 x 100 000 cm is equivalent to 1.23 km.

Hence, the actual distance in km is 1.23 km.

The utility that maximizes the possible utility of both the agents Alice and Bob is equal to option D. $10.

Compare Alice's utility from each option and choose the one that maximizes her utility.

Let us consider each option,

If Alice offers Bob $0, her utility will be,

If XA > XB then

UA (XA , XB )= 0.3x3 + 0.72A

UA(10,0)

= 0.3(10)³ + 0.72(10)

= 307.2

If Alice offers Bob $5, Bob's utility will be,

UB(10,5)

= 0.314 + 0.72(5)

= 0.314 + 3.6

= 3.914

And Alice's utility will be,

UA(5,10)

= -0.32(5) + 1.3(10)

= 11.4

Total utility for both Alice and Bob will be,

UA(5,10) + UB(10,5)

= 11.4 + 3.914

= 15.314

If Alice offers Bob $2, Bob's utility will be,

UB(10,2)

= 0.314 + 0.72(2)

= 1.754

And Alice's utility will be,

UA(2,10)

= -0.32(2) + 1.3(10)

= 12.4

So the total utility for both Alice and Bob will be,

UA(2,10) + UB(10,2)

= 12.4 + 1.754

= 14.154

If Alice offers Bob $10, Bob's utility will be,

UB(10,10)

= 0.314 + 0.72(10)

= 7.514

And Alice's utility will be,

UA(10,10)

= 0.3(10)³ + 0.72(10)

= 307.2

So the total utility for both Alice and Bob will be,

UA(10,10) + UB(10,10)

= 307.2 + 7.514

= 314.714

Therefore, utility which maximizes the total utility for both Alice and Bob is given by option (D) $10.

Learn more about utility here

brainly.com/question/30430075

#SPJ4

Two radicals are said to be radicals if they have the same indices and the radicand.

In mathematics, a radicand is an expression, a number, or a variable that is enclosed in a root symbol. The factor for which we are determining the root is quantity. As we study exponents and roots, the word "radicand" is utilised. Therefore, the radicand in 2 has a value of 2. Following are some radicand examples:

3√(pq) → pq is the radicand

√(a+b) → a + b is the radicand

4√15 → 15 is the radicand

A radical is a symbol used to represent a number's root. It is symbolised as. The word or phrase that appears after the radical symbol is known as the radicand. Hence, it may be claimed that the radical represents the radicand. Alternatively said, the radicand sign is √.

Learn more about Radicand:

https://brainly.com/question/14963020

#SPJ4

Complete question:

Type the correct words in the blanks:

Two radicals are said to be radicals if they have the same               and the radicand.

Answer:

(1, 2) and (-1, -2). or. (±1, ±2)

Step-by-step explanation:

[tex]{ \sf{f(x) = \frac{4x}{ {x}^{2} + 1 } }} \\ [/tex]

- Simply, a critical number or critical point is gotten by differentiating the function.

From Quotient rule;

[tex]{ \sf{ {f}^{l}(x) = \frac{4( {x}^{2} + 1) - (2x)(4x)}{ {( {x}^{2} + 1)}^{2} } }} \\ \\ { \sf{f {}^{l}(x) = \frac{ {4x}^{2} + 4 - {8x}^{2} }{ {( {x}^{2} + 1) }^{2} } }} \\ \\ { \sf{f {}^{l}(x) = \frac{4(1 - {x}^{2}) }{ {( {x}^{2 } + 1) }^{2} } }}[/tex]

Then equate this derivative to zero;

[tex]{ \sf{0 = \frac{4(1 - {x}^{2} )}{ {( {x}^{2} + 1) }^{2} } }} \\ \\ { \sf{4(1 - {x}^{2} ) = 0}} \\ \\ { \sf{4 - {4x}^{2} = 0}} \\ \\ { \sf{4 {x}^{2} = 4}} \\ \\ { \sf{x = \sqrt{1} }} \\ \\ { \sf{ \underline{ \: x = \pm 1 \: }}}[/tex]

Substitute for x in f(x)

For x = 1

[tex]{ \sf{f(1) = \frac{4(1)}{ {(1)}^{2} + 1} = \frac{4}{2} = 2 }} \\ [/tex]

For x = -1

[tex]{ \sf{f( - 1) = \frac{4( - 1)}{ {( - 1)}^{2} + 1 } = \frac{ - 4}{2} = - 2 }} \\ [/tex]

Therefore points are;

(1, 2) and (-1, -2)

Answer: D 30

Step-by-step explanation:

4/10 + 30/100

2/5 + 3/10

7/10

NB: LEFT-HAND SIDE IS EQUAL TO THE RIGHT-HAND SIDE

Case 1: The constant c of the piecewise function is equal to 1 / 7.

Case 2: The value of the constant b of the piecewise function with the greater absolute value is equal to 20.

A piecewise function is function formed by two or more functions relative to intervals. A piecewise function is continuous if they do not have any jump on graph. For two functions, we must solve the following equation for the case of a piecewise function formed by two functions:

g(a) = h(a)

Case 1 - g(y) = c · y + 3, h(y) = c · y² - 3, a = 7

c · a + 3 = c · a² - 3

c · (a² - a) = 6

c = 6 / (a² - a)

c = 6 / (7² - 7)

c = 6 / 42

c = 1 / 7

The value of the constant c is equal to 1 / 7.

Case 2 - g(x) = b - 2 · x, h(x) = - 150 / (x - b), a = 5

b - 2 · a = - 150 / (a - b)

(b - 2 · a) · (a - b) = - 150

a · b - b² - 2 · a² + 2 · a · b = - 150

- b² + 3 · a · b - 2 · a² = - 150

b² - 3 · a · b + 2 · a² - 150 = 0

b² - 15 · b - 100 = 0

(b - 20) · (b + 5) = 0

b₁ = 20 or b₂ = - 5

The solution with the greater absolute value is b = 20.

To learn more on piecewise functions: https://brainly.com/question/28225662

#SPJ1

Therefore, the average rate of change between the points (3,9) and (5,15) is 3.

Coordinates are a set of values that locate the position of a point in space. In mathematics, coordinates are used to represent the position of points on a plane or in space, using a set of numerical values that correspond to the distance along each axis from an origin point. In two-dimensional Cartesian coordinate systems, for example, a point is represented by two numbers (x, y) that indicate its position relative to the x and y axes. In three-dimensional Cartesian coordinate systems, a point is represented by three numbers (x, y, z) that indicate its position relative to the x, y, and z axes.

Here,

The average rate of change between the points (3,9) and (5,15) is the slope of the line passing through those two points. We can use the slope formula:

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) = (3,9) and (x2, y2) = (5,15).

slope = (15 - 9) / (5 - 3)

= 6 / 2

= 3

To know more about coordinates,

https://brainly.com/question/16634867

#SPJ1

Step-by-step explanation:

2x + ay + 2 = 0

the gradient or slope of the line is the factor m of x in the form

y = mx + b

so let's transform the given equation into that form :

ay = -2x - 2

y = (-2/a)x - 2/a

we know that m = 1.

so,

-2/a = 1

-2 = a

In response to the stated question, we may state that As a result, the overall probability of an accurately picked drive-thru order across all chains is roughly 0.929, or 92.9%.

Probability theory is an area of mathematics that calculates the likelihood of an occurrence or a proposition being true. A risk is a number in the range of 0 and 1, whereas 1 implies certainty and a probability of roughly 0 indicates how likely an event seems to be to occur. Probability is a mathematical expression of the chance or chances that a given event will occur. Probabilities can alternatively be stated as integers between 0 and 1 or as % from 0% to 100%. the ratio of occurrences among equally likely choices that result in a certain event in comparison to all other outcomes.

Using the data in the table, we can compute the likelihood of a correct drive-thru order for each fast food chain, as well as the overall chance of an accurate order across all chains.

Divide the number of accurate orders by the total number of orders to find the chance of a randomly picked order being accurate at each chain:

P(accurate order) = 1246 / 1300 = 0.958 for McDonald's

P(accurate order) = 1020 / 1100 = 0.927 Taco Bell

P(accurate order) = 708 / 800 = 0.885 for Burger King

P(accurate order) = 940 / 1000 = 0.94 for Wendy's

P(adequate overall order) = 0.3 * 0.958 + 0.25 * 0.927 + 0.2 * 0.885 + 0.25 * 0.94 = 0.929

As a result, the overall likelihood of an accurately picked drive-thru order across all chains is roughly 0.929, or 92.9%.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

Answer:

[tex]v = \frac{7}{2}[/tex]

Step-by-step explanation:

The correct option b) [tex]\rm y = \sqrt{x+ 3} + 3[/tex] is a function of the given graph.

The graph οf a relatiοn is said tο reflect a functiοn if a vertical line drawn anywhere οn the graph οnly intersects the graph οnce. In the event when a vertical line can graph is nοt a representatiοn οf a functiοn if there are mοre than twο pοints οn it.

The graphs coordinate is at (-3, 3)

Lets put the value in all the given function to find the correct function

a. [tex]\rm y = \sqrt{x - 3} + 3[/tex]

Using (-3, 3) as x and y

[tex]\rm 3 = \sqrt{(-3) - 3} + 3[/tex]

[tex]\rm 3 = \sqrt{9} + 3[/tex]

[tex]\rm 3 \neq 3 + 3[/tex]

[tex]\rm y = \sqrt{x - 3} + 3[/tex] is not a function of graph.

b. [tex]\rm y = \sqrt{x+ 3} + 3[/tex]

Using (-3, 3) as x and y

[tex]\rm 3 = \sqrt{-3+ 3} + 3[/tex]

[tex]\rm 3 = \sqrt{0} + 3[/tex]

[tex]\rm 3 = 0 + 3[/tex]

[tex]\rm 3 = 3[/tex]

[tex]\rm y = \sqrt{x+ 3} + 3[/tex] is a function of the given graph.

The other two options are no the functions as cube root is used and the value of x wont satisfy there.

To know more about graph visit:-

brainly.com/question/17267403

#SPJ1

Method to list all non-isomorphic trees on n vertices is to add edges to a single vertex tree. Using A, B, C, D, E, we list 5 non-isomorphic trees on 6 vertices.

A by-hand method to give a list of all non-isomorphic trees on exactly n vertices is to start with a tree on n vertices and then generate all possible trees by adding edges between vertices that are not already connected.

For example, to find all non-isomorphic trees on 4 vertices, we can start with a single vertex and then add edges to form a tree with 2 vertices, then add edges to form a tree with 3 vertices, and finally add edges to form a tree with 4 vertices. We can then check each tree for isomorphism by comparing their adjacency matrices.

Using the method from (a), we can find all non-isomorphic trees on exactly six vertices by starting with a single vertex and adding edges until we have a tree on six vertices.

To ensure that we generate all possible trees, we can use the following five vertices: A, B, C, D, E. We can then generate all trees by adding edges between vertices that are not already connected, making sure to avoid creating cycles. After generating all trees, we can check for isomorphism by comparing their adjacency matrices.

The resulting list of non-isomorphic trees on six vertices, in alphabetical order, is shown. The tree 1 and tree 2 are the same. Also, trees 3, 4, and 5 are not isomorphic to each other or to trees 1 and 2.

To know more about non-isomorphic trees:

https://brainly.com/question/29994833

#SPJ4

Answer

6255 pounds

8.34×750=6255lbs