In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular path with center at (7,2). Before starting operation, the tool is at (5, 4).The correct G and M code for this motion is

Answer:

[tex]\eta_{turbine} = 0.603 = 60.3\%[/tex]

Explanation:

First, we will find actual properties at given inlet and outlet states by the use of steam tables:

AT INLET:

At 4MPa and 350°C, from the superheated table:

h₁ = 3093.3 KJ/kg

s₁ = 6.5843 KJ/kg.K

AT OUTLET:

At P₂ = 125 KPa and steam is saturated in  vapor state:

h₂ = [tex]h_{g\ at\ 125KPa}[/tex] = 2684.9 KJ/kg

Now, for the isentropic enthalpy, we have:

P₂ = 125 KPa and s₂ = s₁ = 6.5843 KJ/kg.K

Since s₂ is less than [tex]s_g[/tex] and greater than [tex]s_f[/tex] at 125 KPa. Therefore, the steam is in a saturated mixture state. So:

[tex]x = \frac{s_2-s_f}{s_{fg}} \\\\x = \frac{6.5843\ KJ/kg.K - 1.3741\ KJ/kg.K}{5.91\ KJ/kg.K}\\\\x = 0.88[/tex]

Now, we will find [tex]h_{2s}[/tex](enthalpy at the outlet for the isentropic process):

[tex]h_{2s} = h_{f\ at\ 125KPa}+xh_{fg\ at\ 125KPa}\\\\h_{2s} = 444.36\ KJ/kg + (0.88)(2240.6\ KJ/kg)\\h_{2s} = 2416.088\ KJ/kg[/tex]

Now, the isentropic efficiency of the turbine can be given as follows:

[tex]\eta_{turbine} = \frac{h_1-h_2}{h_1-h_{2s}}\\\\\eta_{turbine} = \frac{3093.3\ KJ/kg-2684.9\ KJ/kg}{3093.3\ KJ/kg-2416.088\ KJ/kg}\\\\\eta_{turbine} = \frac{408.4\ KJ/kg}{677.212\ KJ/kg}\\\\\eta_{turbine} = 0.603 = 60.3\%[/tex]

Answer:

Explanation:

Given:

Q factor, =1000

natural frequency, [tex]f_n=2000~Hz[/tex]

Damping factor, [tex]\zeta=?[/tex]

Bandwidth, BW=?

We have the relation:

[tex]Q=\frac{1}{2\zeta}[/tex]

[tex]\zeta=\frac{1}{2Q}[/tex]

[tex]\zeta=\frac{1}{2\times 1000}[/tex]

[tex]\zeta=5\times 10^{-4}[/tex]

Bandwidth:

[tex]BW=\frac{f_n}{Q}[/tex]

[tex]BW=\frac{2000}{1000}[/tex]

[tex]BW=2~Hz[/tex]

Solution :

The spring is expanded by 2 times of the block when it moves down an inclined by x times.

Here, [tex]$x_1$[/tex] = 39 mm

        [tex]x_2[/tex] = 225 mm

a). From the work energy principal,

   Work forces = kinetic energy

[tex]$(mg \sin 50^\circ)\times \frac{99}{1000}-(\mu_k mg \cos 50^\circ) \times \frac{99}{1000} -\frac{1}{2}k(0.225^2 - 0.039^2)=\frac{1}{2}m(V^2_2-0.08^2)$[/tex]

[tex]$(112.6 \times 0.099)-(14.17 \times 0.099)-4.91= 7.5(V^2_2-0.08^2)$[/tex]

[tex]$9.75= 7.5(V^2_2-0.08^2)$[/tex]

[tex]$1.3= V^2_2-0.08^2$[/tex]

[tex]$V_2=1.14\ m/s$[/tex]

b). calculating the distance travelled by the block before it comes to rest.

Substitute the value of [tex]V_2[/tex] in (1),

[tex]$-(\mu_kmg \cos 50^\circ)x + (mg \sin 50^\circ)x-\frac{1}{2}k\left( ( 2x+0.039)^2 - 0.039^2\right)= -\frac{1}{2}m(0.08)^2$[/tex]

[tex]$-14.17x+112.6x - 100(4x^2+0.156x)=-0.048$[/tex]

[tex]$98.43x - 100(4x^2+0.156x)+0.048=0$[/tex]

[tex]$98.43x - 400x^2-15.6x+0.048=0$[/tex]

[tex]$82.83x - 400x^2+0.048=0$[/tex]

[tex]$ 400x^2- 82.83x-0.048=0$[/tex]

x = 0.20 m

Answer:

The physical topology addresses how devices are connected, while a logical topology addresses how devices actually communicate to one another ( C )

Explanation:

Network physical is simply the process/method of connecting the Network using cables while Logical topology is the general architecture of the communication mechanism in the network for all nodes.

Hence The correct statement is the physical topology addresses how devices are connected, while a logical topology addresses how devices actually communicate to one another

Answer:

1. Drawing grid.

2. Orthogonal.

3. Geometries.

4. CTRL+N.

5. Thirteen (13).

Explanation:

CAD is an acronym for computer aided design and it is typically used for designing the graphical representation of a building plan. An example of a computer aided design (CAD) software is AutoCAD.

Some of the features of an AutoCAD software are;

1. Drawing grid: is a regular pattern of dots displayed on the screen of an AutoCAD software, which acts as a visual aid and it's also used to define the extent of a drawing.

2. Ortho is short or an abbreviation for orthogonal, which means either vertical or horizontal.

3. Tangent is a point where two geometries meet at just a single point.

4. If you want to create a new drawing, simply press CTRL+N for the short cut key.

5. There are thirteen object snaps (Osnap) that can help you perform your task on AutoCAD easily. The 13 object snaps (Osnap) are; Endpoint, Midpoint, Apparent intersect, Intersection, Quadrant, Extension, Tangent, Center, Insert, Perpendicular, Node, Parallel, and Nearest.

Answer:

jsow

hfhcffnbxhdhdhdhdhdhdddhdhdgdhdhdhdhdhdhhhdhdjsksmalalaksjdhfgrgubfghhhhhhh

Explanation:

j

Answer: Can these nuts fit in your mouth?

Explanation:

im just here for the points >:)

Answer:

Explanation:

Tech Social Media giant FB is one of those companies. Not long ago the ceo was brought to court to accusations that his company was selling user data. Turns out this is true and they are selling their users private data to companies all over the word. Once the news turned to something else, people focused on something new but the company still continues to sell it's users data the same as before. This is completely unethical as the information belongs to the user and they are not getting anything while the corporation is profiting.

jrjrkeekkekekkwkkakkllalllalallalllalalaallalalaalalalalalallallallllallalalallaaallalallllllallllllllalaalalalaaaaalalaaaaaaalgjgiejxpwunfifjruritiririirieoeowowowowowowowowooeowowowoeeoeowowowowowowowoowowwowowowoozoeisiaokseekxidjdkdjfidjfjdjfjfjrifjrifjdirjdjrjfjrjfjrjfjrfuejwwuxmaneanfjkaosndjxieneamalhaqzeeshanvhorahfuensiwjakaksjdhfhfnfhfndjxnxmakaalalalwlwlwwow

Answer:

the current consumed is 3.3 A

Explanation:

Given;

resistance, R = 30 ohms

inductance, L = 200 mH

Voltage supply, V = 230 V

frequency of the coil, f = 50 Hz

impedance, Z = 69.6 Ohms

The current consumed is calculated as;

[tex]I = \frac{V}{Z} \\\\I = \frac{230}{69.6} \\\\I = 3.3 \ A[/tex]

Therefore, the current consumed is 3.3 A

Answer:

a)  Vr = - a^2/r cosθ  + aß / r

    Vθ = 1/r [ -a^2/r * sinθ ]

b) attached below

Explanation:

potential function

Ø= a^2 /r  cosØ + aßlnr ----- ( 1 )

a = radius ,  ß = constant

a) Expressions for Vr and Vθ

Vr =  dØ / dr  ----- ( 2 )

hence expression : Vr = - a^2/r cosθ  + aß / r

Vθ = 1/r dØ / dθ ------ ( 3 )

back to equation 1

dØ / dr = - a^2/r sinθ + 0  --- ( 4 )

Resolving equations 3 and 4

Vθ = 1/r [ -a^2/r * sinθ ]

b) expression for stream function

attached below

Answer:

The answer is "15 N".

Explanation:

Please find the complete question in the attached file.

In frame B:

For just slipping:

[tex]\to \frac{P}{2} \cos \theta =mg \sin \theta\\\\\to P=2 mg \tan \theta \\\\[/tex]

        [tex]=2 \times 1 \times g \times \tan 37^{\circ}\\\\ =2 \times 10 \times \frac{3}{4}\\\\ =15 \ N[/tex]

Answer:

8.6 ft³/s

Explanation:

The force due to the water jet F = mv where m = mass flow rate = ρQ where ρ = density of water = 62.4 lbm/ft³ and Q = volume flow rate. v = velocity of water jet = 30 ft/s

So, F = mv

F = ρQv

making Q subject of the formula, we have

Q = F/ρv

Since F = force due to water jet = force needed to hold the plate against the water stream = 500 lbf = 500 × 1 lbf = 500 × 32.2 lbmft/s² = 16100 lbmft/s²

Since

Q = F/ρv

Substituting the values of the variables into the equation for Q, we have

Q = F/ρv

Q = 16100 lbmft/s²/(62.4 lbm/ft³ × 30 ft/s)

Q = 16100 lbmft/s²/1872 lbm/ft²s

Q = 8.6 ft³/s

So, the volume flow rate is 8.6 ft³/s.

Answer:

1709.07 ft^3/s

Explanation:

Annual peak streamflow = Log10(Q [ft^3/s] )

mean = 1.835

standard deviation = 0.65

Probability of levee been overtopped in the next 15 years = 1/5

Determine the design flow ins ft^3/s

P₁₅ = 1 - ( q )^15 = 1 - ( 1 - 1/T )^15 = 0.2

                         ∴  T = 67.72 years

Q₁₅ = 1 - 0.2 = 0.8

Applying Lognormal distribution : Zt = mean + ( K₂ * std ) --- ( 1 )

K₂ = 2.054 + ( 67.72 - 50 ) / ( 100 - 50 ) * ( 2.326 - 2.054 )

    = 2.1504

back to equation 1

Zt = 1.835 + ( 2.1504 * 0.65 )  = 3.23276

hence:

Log₁₀ ( Qt(ft^3/s) ) = Zt  = 3.23276

hence ; Qt = 10^3.23276

                  = 1709.07 ft^3/s

Answer:

Veracity, Value and Visualization are not only the characteristics of Big Data but are also the characteristics of relational databases. Veracity of data is issue with smallest data stores this is the reason that it is important in relation...

Complete Question

Complete Question is attached below.

Answer:

[tex]V'=5m/s[/tex]

Explanation:

From the question we are told that:

Diameter [tex]d=0.10m[/tex]

Power [tex]P=4.0kW[/tex]

Head loss [tex]\mu=10m[/tex]

 [tex]\frac{P_1}{\rho g}+\frac{V_1^2}{2g}+Z_1+H_m=\frac{P_2}{\rho g}+\frac{V_2^2}{2g}+Z_2+\mu[/tex]

 [tex]\frac{300*10^3}{\rho g}+35+Hm=\frac{500*10^3}{\rho g}+15+10[/tex]

 [tex]H_m=(\frac{200*10^3}{1000*9.8}-10)[/tex]

 [tex]H_m=10.39m[/tex]

Generally the equation for Power is mathematically given by

 [tex]P=\rho gQH_m[/tex]

Therefore

 [tex]Q=\frac{P}{\rho g H_m}[/tex]

 [tex]Q=\frac{4*10^4}{1000*9.81*10.9}[/tex]

 [tex]Q=0.03935m^3/sec[/tex]

Since

 [tex]Q=AV'[/tex]

Where

 [tex]A=\pi r^2\\A=3.142 (0.05)^2[/tex]

 [tex]A=7.85*10^{-3}[/tex]

Therefore

 [tex]V'=\frac{0.03935m^3/sec}{7.85*10^{-3}}[/tex]

 [tex]V'=5m/s[/tex]

Answer:

The answers are in the explanation. The pH is 5.91

Explanation:

The CH3NH2 reacts with HCl as follows:

CH3NH2 + HCl → CH3NH3⁺ + Cl⁻

When 200mL of HCl are added, the moles of CH3NH2 and HCl are reacting completely producing CH3NH3+ and Cl-. That means the species present are:

no H+. All reacted

yes H2O. Because the water is present in the solutions of HCl and CH3NH2

yes Cl-. Is a product of the reaction

Yes CH3NH2. Is consumed in the reaction but comes from the equilibrium of CH3NH3+

yes CH3NH3+. Is the other product of the reaction. MAJOR SPECIES

When 300.00mL of HCl are added, 100mL are in excess:

yes H+. Is in excess: H+ + Cl- = HCl in water. MAJOR SPECIES. Determine the pH of the solution.

yes H2O. Is present because the reactants are diluted.  

yes Cl-. Is a product of reaction and comes from HCl.

Yes CH3NH2. The reactant is over but comes from the equilibrium of CH3NH3+

yes no CH3NH3+. Yes. Is a product and remains despite HCl is in excess.

To find the pH:

At equivalence point the ion that determines pH is CH3NH3+. Its concentration is:

0.100L * (0.200mol/L) = 0.0200 moles / 0.300L = 0.0667M CH3NH3+

The equilibrium of CH3NH3+ is:

Ka = Kw/kb = 1x10-14/4.4x10-4 = 2.273x10-11 = [H+] [CH3NH2] / [CH3NH3+]

As both [H+] [CH3NH2] comes from the same equilibrium:

[H+] =  [CH3NH2] = X

2.273x10-11 = [X] [X] / [0.0667M]

1.5159x10-12 = X²

X = 1.23x10-6M = [H+]

As pH = -log [H+]

pH = 5.91

The pH at the equivalent point for this titration is "5.91".

[tex]CH_3NH_2 = 0.200\ M\\\\ \text{volume} = 100.0\ mL = 0.100\ L\\\\HCl = 0.100\ M\\\\[/tex]

We must now quantify the pH well at the equivalence point.

We know that even at the point of equivalence, moles of acid and moles of the base are equivalent. As such, first, we must calculate the number of moles of the given base.

Calculating the Moles in [tex]CH_3NH_2 = 0.200\ M \times 0.100\ L = 0.0200\ moles[/tex]

Calculating the Moles in [tex]HCl = 0.0200 \ moles[/tex]

Calculating the volume of [tex]HCl[/tex]:

[tex]\to \text{Molarity} = \frac{ \text{moles}}{\text{volume \ (L)}} \\\\\to \text{Volume} = \frac{\text{moles}}{\text{molarity}}\\\\[/tex]

                [tex]= \frac{0.0200 \ moles}{ 0.100\ M}\\\\= 0.200 \ L\\\\= 200 \ mL\\\\[/tex]

Calculating the reaction among the acid and base:

[tex]CH_3NH_2 + HCl \longrightarrow CH_3NH_3^{+} + Cl^-[/tex]

[tex]0.0200 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0.0200 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0.0200[/tex]

Therefore the conjugate acid of the bases exists at the standard solution.

Then we must calculate the new molar mass of [tex]CH_3NH_3^+[/tex].

Total volume[tex]= 100 + 200 = 300\ mL = 0.300\ L[/tex]

[tex][CH_3NH_3^+] = \frac{0.0200\ mole}{ 0.300\ L}= 0.0667\ M[/tex]

Using the ICE table

[tex]CH_3NH_3^+ + H_2O \longrightarrow CH_3NH_2 + H_3O^+[/tex]

[tex]I \ \ \ \ \ \ \ \ \ \ 0.0667 \ \ \ \ \ \ \ \ \ 0\ \ \ \ \ \ \ \ \ 0\\\\C\ \ \ \ \ \ \ \ -x\ \ \ \ \ \ \ \ +x \ \ \ \ \ \ \ \ +x\\\\E \ \ \ \ \ \ \ \ \ \ \ \ 0.0667-x \ \ \ \ \ \ \ \ \ \ \ \ +x \ \ \ \ \ \ \ \ \ \ \ \+x\\\\\to Ka = \frac{[CH_3NH_2] [H_3O^+] }{[CH_3NH_3^+]}[/tex]

Calculating [tex]K_a[/tex] from [tex]K_b[/tex]

[tex]\to K_a \times K_b = 1\times 10^{-14}\\\\\to K_a = \frac{1\times 10^{-14}}{4.4\times 10^{-4}} = 2.27\times 10^{-11}\\\\[/tex]

                           [tex]= 2.27\times 10^{-11} \\\\= x\times \frac{x}{(0.0667-x)}[/tex]

The x in the 0.0667-x can be ignored since the Ka value is just too small and it also does not follow the five percent criteria.

[tex]\to 2.27 \times 10^{-11} \times 0.0667 = x_2\\\\\to x_2 = 1.515\times 10^{-12}\\\\\to x = 1.23\times 10^{-6}\ M\\\\\to [H_3O^+] = x = 1.23\times 10^{-6}\ M\\\\[/tex]

We have the formula to calculate pH.

[tex]\to pH = - \log [H_3O^+] = - \log 1.23\times 10^{-6}\ M= 5.91[/tex]

The pH at the equivalent point for this titration is "5.91".

Find out more information about the pH here:

brainly.com/question/15289741

Answer:

a) 1.9%

b) T2s = 505.5 k = 232.5°C

Explanation:

P1 = 95 kPa

T1 = 27°C  = 300 k

P2 = 600 kPa

T1 = 277°c  = 550 k

Table used : Table ( A - 17 ) Ideal gas properties of air

a) determining the isentropic efficiency of the compressor

Л = ( h2s - h1 ) / ( h2a -  h1 ) ---- ( 1 )

where ; h1 = 300.19 kJ/kg , T1 = 300 K , h2a = 554.74 kJ/kg , T2 = 550 k

To get h2s we have to calculate the the value of Pr2 using Pr1(relative pressure)

 Pr2 = P2/P1 * Pr = ( 600 / 95 ) * 1.306  hence; h2s = 500.72 kJ/kg

back to equation1

Л = 0.019 = 1.9%

b) Calculate the exit temperature of the air if compressor is reversible

if compressor is reversible the corresponding exit temperature

T2s = 505.5 k = 232.5°C

given that h2s = 500.72 kJ/kg

Answer:

[tex]T_o=82.1sec[/tex]

Explanation:

From the question we are told that:

Lost Time [tex]t=12secs[/tex]

Sum of critical flow ratios [tex]X=0.72[/tex]

Generally the Webster Method's equation for Optimum cycle time is is mathematically given by

 [tex]T_o=\frac{1.5t+5}{1-x}[/tex]

 [tex]T_o=\frac{1.5*12+5}{1-0.72}[/tex]

 [tex]T_o=82.1sec[/tex]

Answer:

The Space Needle is a cut away with minimal residual deflection due to load transfer.

Answer:

Walls Built Using Bricks and Wood

The brick house is more energy-efficient than the one built with wood.

Explanation:

Because of their high thermal mass, which gives bricks the ability to absorb heat and release it over time, bricks remain more energy-efficient than other building materials, including wood.  In summer, bricks leave your home cool.  In winter, they make it warm.  With these two advantages provided by bricks over other building materials, bricks are the most energy-efficient building material.

Answer:

can you please give us the option for this question

Answer: Attached below is the missing detail and Mohr's circle.

i) б1 =  9.6 Ksi

б2 = -10.7 ksi

ii) 10.2 Ksi

iii)  -0.51Ksi

Explanation:

First step :

direct compressive stress on shaft

бd = P / π/4 * d^2

      = -20 / 0.785 * 5^2  = -1.09 Ksi

shear stress at the outer surface due to torsion

ζ = 16*T / πd^3

  = (16 * 250 ) / π * 5^3  = 010.19 Ksi

Calculate the Principal stress, maximum in-plane shear stress and average normal stress

Using Mohr's circle ( attached below )

i) principal stresses:

б1 = 4.8 cm * 2 = 9.6 Ksi

б2 = -5.35 cm * 2 = -10.7 ksi

ii) maximum in-plane shear stress

ζ  = radius of Mohr's circle

   = 5.1 cm = 10.2 Ksi   ( Given that ; 1 cm = 2Ksi )

iii) average normal stress

 = 9.6 + ( - 10.7 ) / 2

  = -0.51Ksi

Answer:

Interval:  x∈ ( 0, ∞ )

There are no transient terms

Explanation:

x (dy/dx) – y= x^2sinx

Attached below is the detailed solution of the Given problem

There are no transient terms found in the general solution

Interval:  x∈ ( 0, ∞ )

Answer:

The code is as follows:

<form name = "myForm">

       <div>

           <input type="radio" name="vehicle" value="D0" id="D0"/>

           <label for="D0">Car</label>

       </div>

       <div>

           <input type="radio" name="vehicle" value="D1" id="D1"/>

           <label for="D1">Bike</label>

       </div>

   </form>

Explanation:

This defines the first button

           <input type="radio" name="vehicle" value="D0" id="D0"/>

           <label for="D0">Car</label>

This defines the second button

           <input type="radio" name="vehicle" value="D1" id="D1"/>

           <label for="D1">Bike</label>

The code is self-explanatory, as it follows all the required details in the question

Answer:

Tensile stress = 0.1855Kpsi

Total deformation = 0.0012243 in

Unit strain =  1.855 *10^-5   or  18.55μ

Change in the rod diameter = 5.02 * 10^ -6 in

Explanation:

Data given: D= 0.82 in

                   L = 5.5 ft * 12 = 66 in

load (p) = 3000 (Ibf) /32.174 = 93.243 Ibm

Area = (π/4) D² = (π/4) 0.82²  = 0.502655 in²

∴ Tensile stress Rt = P/A = 93.243/0.502655 = 185.50099 pound/in²

                           Rt = 0.1855 Kpsi

∴ Total deformation = PL / AE = Rt * L/ Eal

                                 = 0.1855 * 10³  * 66 / 10000 * 10³

                                 = 0.0012243 in

∴the unit strains = total deformation / L = 0.0012243/ 66

                          =0.00001855 = 1.855 *10^-5

                         = 18.55μ

∴ Change in rod   Δd/ d = μ ΔL/L

                           = (0.33) 1.855 *10^-5 * 0.82

                           = 5.02 * 10^ -6 in

Answer:

H(s) = 20 / [ 1 + s / 10^5 ]^2

Explanation:

Given data:

cutoff frequency = 100 kHz

stopband attenuation rate = 40 dB/decade

nominal passband gain = 20 dB

new nominal passband gain at cutoff = 14 dB

Represent the transfer function H(s)

The attenuation rate show that there are two(2) poles

H(s) = k / [ 1 + s/Wc ]^2  ----- ( 1 )

where : Wc = 100 kHz = 10^5 Hz , K = 20 log k = 20 dB ∴ k = 20

Input values into equation 1

H(s) = 20 / [ 1 + s / 10^5 ]^2