In an exciting game, a baseball player manages to safely slide into second base. The mass of the baseball player is 88.9 kg and the coefficient of kinetic friction between the ground and the player is 0.53. (a) Find the magnitude of the frictional force in newtons. N (b) It takes the player 1.7 s to come to rest. What was his initial velocity (in m/s)

Answer:

82.25 moles of He

Explanation:

From the question given above, the following data were obtained:

Volume (V) = 10 L

Mass of He = 0.329 Kg

Temperature (T) = 28.0 °C

Molar mass of He = 4 g/mol

Mole of He =?

Next, we shall convert 0.329 Kg of He to g. This can be obtained as follow:

1 Kg = 1000 g

Therefore,

0.329 Kg = 0.329 Kg × 1000 g / 1 Kg

0.329 Kg = 329 g

Thus, 0.329 Kg is equivalent to 329 g.

Finally, we shall determine the number of mole of He in the tank. This can be obtained as illustrated below:

Mass of He = 329 g

Molar mass of He = 4 g/mol

Mole of He =?

Mole = mass / molar mass

Mole of He = 329 / 4

Mole of He = 82.25 moles

Therefore, there are 82.25 moles of He in the tank.

Answer: [tex]2.4705\ kg.m^2[/tex]

Explanation:

Given

length of the rod is L=0.9 m

Mass of the rod m=3.8 kg

Point masses has mass of m=2.3 kg

Moment of Inertia of the rod about the center is

[tex]\Rightarrow I_o=\dfrac{1}{12}ML^2[/tex]

Moment of inertia of combined system is the sum of rod and two point masses.

[tex]\Rightarrow I=I_o+2mr^2[/tex]

[tex]\Rightarrow I=\dfrac{1}{12}3.8\times 0.9^2+2\times 2.3\times \left(\dfrac{0.9}{2}\right)^2\\\\\Rightarrow I=1.539+0.9315\\\Rightarrow I=2.4705\ kg-m^2[/tex]

Answer:

KE = 2800 J

Explanation:

Usually a velocity is expressed as m/s. Then the energy units are joules.

[tex]\frac{108 km}{hr} * \frac{1000m}{1 km} * \frac{1 hour}{3600 seconds} =\frac{108*1000 m}{3600sec}[/tex]

v = 30 m / sec

KE = 1/2 * 4 * (30)^2

KE =2800 kg m^2/sec^2

KE = 2800 Joules

Answer:

Look at work

Explanation:

Θ= 4t^3+10t-40

a) In order to find ω, we need to find displacement so plug in t=2 to find Θ.

Θ= 4*8+20-40=12

use ω=Θ/t

Plug in values

ω=6 rad/s

b) In order to find α we use ω/t.

Plug in values

α=6/2= 3 rad/s^2

Answer:

the relation between the time period of the planet is

T = 2π √[( r1 + r2 )³ / 8GM ]

Explanation:

Given the data i  the question;

mass of sun = M

minimum and maximum distance = r1 and r2 respectively

Now, using Kepler's third law,

" the square of period T of any planet is proportional to the cube of average distance "

T² ∝ R³

average distance a = ( r1 + r2 ) / 2

we know that

T² = 4π²a³ / GM

T² = 4π² [( ( r1 + r2 ) / 2 )³ / GM ]

T² = 4π² [( ( r1 + r2 )³ / 8 ) / GM ]

T² = 4π² [( r1 + r2 )³ / 8GM ]

T = √[ 4π² [( r1 + r2 )³ / 8GM ] ]

T = 2π √[( r1 + r2 )³ / 8GM ]

Therefore, the relation between the time period of the planet is

T = 2π √[( r1 + r2 )³ / 8GM ]

Answer:

8m/s

Explanation:

Vavg= 16-0/2=8m/s

Answer:

Explanation:

a)

The force on electron acts opposite to the velocity , and direction of force on electron is always opposite to direction of electric field .

Hence direction of electric field must be in the same  in which electrons travels.

Hence option iii is correct.

b )

deceleration a = force / mass

= qE / m

= 1.6 x 10⁻¹⁶ x 5.6 x 10⁵ / 9.1 x 10⁻³¹

= .98 x 10²⁰ m /s²

v² = u² - 2 a s

0 = (8.06 x 10⁶ )² - 2 x .98 x 10²⁰ s

s = 64.96 x 10¹² / 1.96 x 10²⁰

= 33.14 x 10⁻⁸ m

c ) time required

= 8.06 x 10⁶ / .98 x 10²⁰

= 8.22 x 10⁻¹² s .

d ) Its speed will be same as that in the beginning ie 8.06 x 10⁶ m/s .

Answer:

(a) Option (i)

(b) 6.6 x 10^-4 m  

(c) 8.2 x 10^-11 s

Explanation:

initial velocity, u = 8 .06 x 10^6 m/s

Electric field, E = 5.6 x 10^5 N/C

(a) The direction of field is opposite.

Option (i).

(b) Let the distance is s.  

Use third equation of motion

[tex]v^2 = u^2 + 2 a s \\\\0 = u^2 - 2 \times \frac{qE}{m}\times s\\\\8.06\times 10^6\times 8.06\times 10^6 = \frac {1.6\times 10^{-19}\times 5.6\times 10^5}{9.1\times 10^{-31}} s\\\\s = 6.6\times 10^{-4} m[/tex]

(c) Let the time is t.

Use first equation of motion.

[tex]v = u + a t \\\\0 = u - \times \frac{qE}{m}\times t\\\\8.06\times 10^6 = \frac {1.6\times 10^{-19}\times 5.6\times 10^5}{9.1\times 10^{-31}} t\\\\t = 8.2\times 10^{-11} s[/tex]

Answer:

30J

Explanation:

Given data

The total quantity of heat recieved= 50J

Quantity of heat used to do work= 20J

Hence the net change is

ΔU= Total Heat - Net work

ΔU= 50-20

ΔU= 30J

Hence the change in the internal energy is 30J

Explanation:

For engine 1,

Energy removed = 239 J

Energy added = 567 J

[tex]\eta_1=\dfrac{239}{567}\cdot100=42.15\%[/tex]

For engine 2,

Energy removed = 457 J

Energy added = 789 J

[tex]\eta_2=\dfrac{457}{789}\cdot100=57.92\%[/tex]

For engine 3,

Energy removed = 422 J

Energy added = 1038 J

[tex]\eta_3=\dfrac{422}{1038}\cdot100=40.65\%[/tex]

So, the engine 2 has the highest thermal efficiency.

Answer:

the pressure exerted by the object is 392,000 N/m²

Explanation:

Given;

mass of the object, m = 8 kg

area of your finger, A = 2 cm² = 2.0 x 10⁻⁴ m²

acceleration due to gravity, g = 9.8 m/s²

The pressure exerted by the object is calculated as;

[tex]Pressure = \frac{F}{A} = \frac{mg}{A} = \frac{8 \times 9.8}{2\times 10^{-4}} = 392,000 \ N/m^2[/tex]

Therefore, the pressure exerted by the object is 392,000 N/m²

Answer:

 B = 1.1413 10⁻² T

Explanation:

We use energy concepts to calculate the proton velocity

starting point. When entering the electric field

        Em₀ = U = q V

final point. Right out of the electric field

        em_f = K = ½ m v²

energy is conserved

       Em₀ = Em_f

       q V = ½ m v²

       v = [tex]\sqrt{2qV/m}[/tex]

we calculate

       v = [tex]\sqrt{\frac{ 2 \ 1.6 \ 10^{-19} \ 300}{1.67 \ 0^{-27}} }[/tex]

       v = [tex]\sqrt{632.3353 \ 10^8}[/tex]

       v = 25.15 10⁴ m / s

now enters the region with magnetic field, so it is subjected to a magnetic force

        F = m a

the force is

       F = q v x B

as the velocity is perpendicular to the magnetic field

       F = q v B

acceleration is centripetal

       a = v² / r

we substitute

       qvB =1/2  m v² / r

       B =  v[tex]\frac{m v}{2 q r}[/tex]

we calculate

       B = [tex]\frac{1.67 \ 10^{-27} 25.15 \ 10^4 }{1.6 \ 10^{-19} 0.23}[/tex]

       B = 1.1413 10⁻² T

Answer:

[tex]M.E=41J[/tex]

Explanation:

From the question we are told that:

Amplitude [tex]a=4.20cm[/tex]

Spring Constant [tex]K=262N/m[/tex]

Mass [tex]m=560g[/tex]

Generally the equation for mechanical energy is mathematically given by

[tex]M.E=\frac{1}{2}km^2[/tex]

[tex]M.E=0.5*262*0.56^2[/tex]

[tex]M.E=41J[/tex]

Answer:

a) the required angle in both radian and degree is  1.25 rad and 71.6°

b) the plane's angular speed relative to the earth is 3.86 × 10⁻⁵ rad/sec

Explanation:

Given the data in the question;

a)

we know that The expression for the angle subtended by an arc of circle at the center of the circle is,

θ = Length / radius

given that Length is 5000 miles and radius is 4000 miles

we substitute

θ = 5000 miles / 4000 miles

θ = 1.25 rad

Radian to Degree

θ = 1.25 rad × ( 180° / π rad )

θ =  71.6°

Therefore, required angle in both radian and degree is  1.25 rad and 71.6°

b)

The flight from Kampala to Singapore take 9 hours.

the plane's angular speed relative to the earth = ?

we know that, the relation between angular velocity and angular displacement is;

ω = θ / t

given that θ is 1.25 rads and time t is 9 hours or ( 9 × 3600 sec ) = 32400 sec

we substitute

ω = 1.25 rad / 32400 sec

ω = 3.86 × 10⁻⁵ rad/sec

Therefore, the plane's angular speed relative to the earth is 3.86 × 10⁻⁵ rad/sec

Light energy is part of a larger form of energy known as electromagnetic energy. Details about electromagnetic energy can be found below.

Electromagnetic spectrum is the entire range of wavelengths of all known electromagnetic radiations extending from gamma rays through visible light, infrared, and radio waves, to X-rays.

Visible light is the part of the electromagnetic spectrum, between infrared and ultraviolet, that is visible to the human eye.

Therefore, Light energy is part of a larger form of energy known as electromagnetic energy.

Learn more about electromagnetic spectrum at: https://brainly.com/question/23727978

#SPJ1

Answer:

Explanation:

When the path difference is equal to wave length or its integral multiple, constructive interference occurs . If it is odd multiple of half wave length , then destructive interference occurs.

For constructive interference , path diff = n λ

For destructive interference path diff = ( 2n+ 1 ) λ /2

where λ is wave length of wave , n is an integer.

a )

path diff = 10 cm which is half the wavelength , so maximum destructive interference will occur.

b )

path diff = 15 cm which is neither  half the wavelength nor full wavelength , so in between is the right option.

c )

path diff = 20 cm which is equal to  the wavelength , so maximum constructive  interference will occur.

d)

path diff = 30 cm which is 3 times half the wavelength , so maximum destructive interference will occur.

e)

path diff = 35 cm which is neither integral multiple of half the wavelength , nor integral multiple of wavelength so in between is th eright answer.

f )

path diff = 40 cm which is 2 times the wavelength , so maximum constructive  interference will occur

Answer:

 ΔL = 3.82 10⁻⁴ m

Explanation:

This is a thermal expansion exercise

          ΔL = α L₀ ΔT

          ΔT = T_f - T₀

where ΔL is the change in length and ΔT is the change in temperature

Let's reduce the length to SI units

          L₀ = 90.5 mm (1m / 1000 mm) = 0.0905 m

let's calculate

          ΔL = 25.10⁻⁶ 0.0905 (154.6 - (14.4))

          ΔL = 3.8236 10⁻⁴ m

using the criterion of three significant figures

          ΔL = 3.82 10⁻⁴ m

By the work-energy theorem, the total work done on the mass by the spring is equal to the change in the mass's kinetic energy:

W = ∆K

and the work done by a spring with constant k as it gets compressed a distance x is -1/2 kx ²; the work it does is negative because the restoring force of the spring points opposite the direction in which it's getting compressed.

So we have

-1/2 k (0.15 m)² = 0 - 1/2 (2.0 kg) (3.0 m/s)²

Solve for k to get k = 800 N/m.

Answer:

Initially let n cannonballs with a total mass of m be to the left of the center of mass at L /2 and the mass of the car at L/2

x1 =  [-m / (m + M)] * L / 2   is the original position of the CM

x2 = (m (x + L/2) + M x) / (m + M) * L/2 final position of CM with all cannon balls to the right

[-m x - m L / 2 + m x - M x] / (M + m) * L/2

= - ( m L / 2 + M x) / (m + M) * L/2 = Xcm

Check the math, but maximum distance occurs when the cannonballs of mass m move from -L/2 to L/2 and the car of mass M moves from zero to -x

Answer:

Wheel and axle

Explanation:

Which simple machine is shown in the diagram?

a wheel and axle

From the given diagram, the machine shown is actually a wheel and axle

Description of wheel and axle

The wheel and axle is a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.

Answer:

Wheel and axle

Explanation:

I assume the blocks are pushed together at constant speed, and it's not so important but I'll also assume it's the smaller block being pushed up against the larger one. (The opposite arrangement works out much the same way.)

Consider the forces acting on either block. Let the direction in which the blocks are being pushed by the positive direction.

The 2.0-kg block feels

• the downward pull of its own weight, (2.0 kg) g

• the upward normal force of the surface, magnitude n₁

• kinetic friction, mag. f₁ = 0.30n₁, pointing in the negative horizontal direction

• the contact force of the larger block, mag. c₁, also pointing in the negative horizontal direction

• the applied force, mag. F, pointing in the positive horizontal direction

Meanwhile the 3.0-kg block feels

• its own weight, (3.0 kg) g, pointing downward

• normal force, mag. n₂, pointing upward

• kinetic friction, mag. f₂ = 0.30n₂, pointing in the negative horizontal direction

• contact force from the smaller block, mag. c₂, pointing in the positive horizontal direction (this is the force that is causing the larger block to move)

Notice the contact forces form an action-reaction pair, so that c₁ = c₂, so we only need to find one of these, and we can get it right away from the net forces acting on the 3.0-kg block in the vertical and horizontal directions:

• net vertical force:

n₂ - (3.0 kg) g = 0   ==>   n₂ = (3.0 kg) g   ==>   f₂ = 0.30 (3.0 kg) g

• net horizontal force:

c₂ - f₂ = 0   ==>   c₂ = 0.30 (3.0 kg) g ≈ 8.8 N

Answer: hello your question is incomplete below is the missing part

A spherical cavity is hollowed out of the interior of a neutral conducting sphere. At the center of the cavity is a point charge, of positive charge q.

answer:

- q

Explanation:

Since the spherical cavity was carved out of a neutral conducting sphere hence the electric field inside this conductor = zero

given that there is a point charge +q at the center of the spherical cavity hence for the electric field inside the conductor to be = zero the total surface charge qint on the wall of the cavity will be -q

Answer:

Explanation:

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

Explanation:

The area of a circle of radius r is given by

[tex]A = \pi r^2[/tex]

Taking the derivative of A with respect to time t, we get

[tex]\dfrac{dA}{dt} = 2\pi r \dfrac{dr}{dt}[/tex]

We also know that

[tex]\dfrac{dr}{dt} = 2\:\text{m/s}\:\text{at}\:r = 39\:\text{m}[/tex]

[tex]\dfrac{dA}{dt} = 2\pi (39\:\text{m})(2\:\text{m/s})= 490\:\text{m}^2\text{/s}[/tex]

Answer:

The weight of an object is the force on it caused by the gravity due to the planet. The weight of an object and the gravitational field strength are directly proportional. For a given mass, the greater the gravitational field strength of the planet, the greater its weight.

Weight can be calculated using the equation:

weight = mass × gravitational field strength

This is when:

weight (W) is measured in newtons (N)

mass (m) is measured in kilograms (kg)

gravitational field strength (g) is measured in newtons per kilogram (N/kg)

Answer:

13.33 K

Explanation:

Given that,

Heat absorbed, Q = 30 J

Mass of nail, m = 5 g = 0.005 kg

The specific heat capacity of the nail is 450 J/kg-°C.

We need to find the increase in the temperature during the process. The heat absorbed in a process is as follows:

[tex]Q=mc\Delta T\\\\\Delta T=\dfrac{Q}{mc}\\\\\Delta T=\dfrac{30}{0.005\times 450}\\\\=13.33\ K[/tex]

So, the increase in temperature is 13.33 K.

Resistance is a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms, symbolized by the Greek letter omega (Ω). Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who studied the relationship between voltage, current and resistance.

Hope this helps!!!!

Answer:

electric current

Explanation:

The answer is electric current

Let A be the position of the block at the top of the first incline; B its position at the bottom of the first incline; C its position at the bottom of the second incline; and D its position at the top of the second incline. I'll denote the energy of the block at a given point by E (point).

At point A, the block has total energy

E (A) = (10.0 kg) (9.80 m/s²) (7.00 m) + 1/2 (10.0 kg) v₀²

E (A) = 686 J + 1/2 (10.0 kg) v₀²

At point B, the block's potential energy is converted into kinetic energy, so that its total energy is

E (B) = 1/2 (10.0 kg) v₁²

The block then slides over the horizontal surface with constant speed v₁ until it reaches point C and slides up a maximum height of 26.0 m to point D. Its total energy at D is purely potential energy,

E (D) = (10.0 kg) (9.80 m/s²) (26.0 m) = 2548 J

Throughout this whole process, energy is conserved, so

E (A) = E (B) = E (C) = E (D)

(a) Solve for v₀ :

686 J + 1/2 (10.0 kg) v₀² = 2548 J

==>   v₀ ≈ 19.3 m/s

(b) Solve for v₁ :

1/2 (10.0 kg) v₁² = 2548 J

==>   v₁ ≈ 22.6 m/s

Now if the horizontal surface is not frictionless, kinetic friction will contribute some negative work to slow down the block between points C and D. Check the net forces acting on the block over this region:

• net horizontal force:

∑ F = -f = ma

• net vertical force:

∑ F = n - mg = 0

where f is the magnitude of kinetic friction, a is the block's acceleration, n is the mag. of the normal force, and mg is the block's weight. Solve for a :

n = mg = (10.0 kg) (9.80 m/s²) = 98.0 N

f = µn = 0.500 (98.0 N) = 49.0 N

==>   - (49.0 N) = (10.0 kg) a

==>   a = - 4.90 m/s²

The block decelerates uniformly over a distance 2.00 m and slows down to a speed v₂ such that

v₂² - v₁² = 2 (-4.90 m/s²) (2.00 m)

==>   v₂² = 490 m²/s²

and thus the block has total/kinetic energy

E (C) = 1/2 (10.0 kg) v₂² = 2450 J

(c) The block then slides a height h up the frictionless incline to D, where its kinetic energy is again converted to potential energy. With no friction, E (C) = E (D), so

2450 J = (10.0 kg) (9.80 m/s²) h

==>   h = 25.0 m

(d) At half the maximum height, the block has speed v₃ such that

2450 J = (10.0 kg) (9.80 m/s²) (h/2) + 1/2 (10.0 kg) v₃²

==>   v₃ ≈ 15.7 m/s

The block loses speed and thus energy as it moves between B and C, but its energy is conserved elsewhere. If we ignore the inclines and pretend that the block is sliding over a long horizontal surface, then its velocity v at time t is given by

v = v₁ + at = 22.6 m/s - (4.90 m/s²) t

The block comes to a rest when v = 0 :

0 = 22.6 m/s - (4.90 m/s²) t

==>   t ≈ 4.61 s

It covers a distance x after time t of

x = v₁t + 1/2 at ²

so when it comes to a complete stop, it will have moved a distance of

x = (22.6 m/s) (4.61 s) + 1/2 (-4.90 m/s²) (4.61 s)² = 52.0 m

(e) The block crosses the rough region

(52.0 m) / (2.00 m) = 26 times

Answer "a" would be correct.

Answer:

d

Explanation:

There's an acceleration from gravity, thus the velocity is becoming faster and faster as it reaches the ground. Thus its D

Brainliest please~