Answers
Complete Question is attached below
We have that the Chemical is
Salt
From the Question we have options
Salt
Sleep
Sold
Heat
Temperature
Generally among est the options
Salt is the only chemical present as it is made of Sodium and chlorine compound
NaCl joined by an ionic bond
For more information on this visit
https://brainly.com/question/1689737?referrer=searchResults
Related Questions
Arrange the following aqueous solutions in order of increasing boiling points.
0.050 m Mg(NO 3) 2; 0.100 m ethanol; 0.090 m NaCl
a. Mg(NO3) < NaCl < ethanol
b. ethanol < Mg(NO3)2 < NaCl
c. ethanol < NaCl < Mg(NO3)2
d. NaCl < ethanol < Mg(NO3)2
e. Mg(NO3)2 < ethanol < NaCl
Answers
Answer:
The correct choice is option b. ethanol < Mg(NO3)2 < NaCl
Explanation:
Ethanol = 0.100 m
Mg(NO3)2 = 0.15 m
NaCl = 0.18 m
The molar concentration of NaCl is the highest, which is why its boiling point will be the highest, too.
Describe what must be happening to the particles above as the change is happening
Answers
Answer:
d
Explanation:
solids the modicual are tightly packed
liquid, more room to move around aka not so tightly packed
gas, can move where ever it wants aka not paked at all
Which of the following are considered elements:
Answers
Answer:
considered as element
Helium He
What does the -40, -42, -43, -44, -46,-48 mean for each isotope of Calcium?
Answers
mass numberi the number of proton + neutron
number of proton for calcium is 20 regardless of isotopes
hence the only difference between calcium isotopes are rhe number of neutron
What is an atomic number
Answers
Answer:
the number of protons is called the atomic number
hope it helps you buddy
Answer: number of protons in an atom
Explanation:
How to find out how many neutrons an isotope has
Answers
Answer:
To find the number of neutrons in an isotope, subtract the number of protons from the atomic mass of the isotope. The atomic number of the element equals the number of protons.
Answer
Choice A
Answer
Choice B
Answer
Choice C
Question
A scientist hypothesizes that a new medication can reduce
the chances of catching a cold Which of these would most
likely be the dependent variable in a study involving this
medication?
//
The participants
who do not receive
the medication
Color PURPLE
The number of
participants who
catch a cold
Color YELLOW
The age of the
participants
Color GRAY
Tt remains the
T+ is purposely
It is used for
Answers
Answer:
what is the question????
13. Find the total number of atoms present in the following molecules.
a. 5 H₂O
b. Zn Cl₂
Answers
Answer:
zxcdfzdg
Explanation:
zszghzd
Calculate the maximum mass of iron that can be obtained from 240 tonnes of iron oxide
Answers
Answer:
167.86 tonnes
Explanation:.
I am assuming the iron oxide is Fe2O3 (Haematite) which is the most common form of iron oxide.
From the atomic masses:
Maximum Mass of iron = 240 * 2*55.845 / (2*55.845 + 3*15.999))
= 240 * 111.69 / (159.687)
= 167.86 tonnes
How many decigrams (dg) are in 0.779 kg?
Answers
Answer:
7790
Explanation:
Answer:
7790 decigrams
Explanation:
How many joules are equivalent to 450 calories?
Answers
Answer:
Below
Explanation:
To convert calories to joules, you need to multiply the value by 4184
450 x 4184 = 1882800 J
If your teacher requires you to round to significant figures, you would round to 2 sig figs as 450 only has 2 sig figs
450 x 4184 = 1.9 x 10^6
Hope this helps! Best of luck <3
Which of the following best describes the make up of Saturn's rings?(1 point) solid bands of sand and dust that formed from the start of the universe solid bands of sand and dust that formed from the start of the universe material from comets that have passed through Saturn's atmosphere material from comets that have passed through Saturn's atmosphere dust, rock, and ice particles that orbit due to Saturn's gravity dust, rock, and ice particles that orbit due to Saturn's gravity debris and rocks from other planets that orbit around Saturn
Answers
Answer:
Which of the following best describes the make up of Saturn's rings?(1 point) solid bands of sand and dust that formed from the start of the universe solid bands of sand and dust that formed from the start of the universe material from comets that have passed through Saturn's atmosphere material from comets that have passed through Saturn's atmosphere dust, rock, and ice particles that orbit due to Saturn's gravity dust, rock, and ice particles that orbit due to Saturn's gravity debris and rocks from other planets that orbit around Saturn
The make up of Saturn's ring are dust, rock, and ice particles that orbit due to Saturn's gravity"
Saturn is one of the 9 planets of the solar system. It is considered to be the second largest planet.
Saturn has seven large rings orbiting around it. These rings are believed to be pieces of comets, asteroids, or shattered moons that broke up before they reached the planet. And this shattered comets or asteroid are believed to be torn apart by Saturn's powerful gravity.
These comets or asteroids are made of billions of small chunks of ice and rocks which are covered or coated with other small materials such as dust particles.
Thus, the correct option that matches the above explanation is "dust, rock, and ice particles that orbit due to Saturn's gravity"
Learn more here: https://brainly.com/question/24569357
As discussed during the lecture, the enzyme HIV-1 reverse transcriptae (HIV-RT) plays a significant role for the HIV virus and is an important drug target. Assume a concentration [E] of 2.00 µM (i.e. 2.00 x 10-6 mol/l) for HIV-RT. Two potential drug molecules, D1 and D2, were identified, which form stable complexes with the HIV-RT.
The dissociation constant of the complex ED1 formed by HIV-RT and the drug D1 is 1.00 nM (i.e. 1.00 x 10-9 mol/l). The dissociation constant of the complex ED2 formed by HIV-RT and the drug D2 is 100 nM (i.e. 1.00 x 10-7 mol/l).
1. Compute the total concentration of [D1]tot that is needed to bind 90% of the HIV-RT at the given concentration [E]tot. Provide your answer as a numerical expression with 3 significant figures in the unit mol/l. You do NOT have to consider competition betwwen the drugs D1 and D2! They are administered separately.
2. Compute the total concentration of [D2]tot that is needed to bind 90% of the HIV-RT at the given concentration [E]tot. Provide your answer as a numerical expression with 3 significant figures in the unit mol/l.You do NOT have to consider competition betwwen the drugs D1 and D2! They are administered separately.
Answers
Answer:
C)[D]/[ED] = 5.20
D)[D]/[ED] = 5.20
E)[D']_T = 1.495* 10 ^-7 M
F)[D'] / [ED'] = 0.0579
Explanation:
E = 250 nM =2.5* 10 ^-7 mol/L , T=298.15 K
Dissociation constant of K_D = 1.3 μM (1.3 *10 ^-6 M)
E + D ⇄ ED → K_a = [ED] / [D][E] (association constant)
ED ⇄ E + D → K_D = [E][D] / [ED] (dissociation constant)
C)
[E] =2.5*10^-7 mol/L
K_D = 1.3* 10^-6 M
K_D = [E][D] / [ED] → [D]/[ED] = K_D / [E]
= [D]/[ED] = 1.3* 10 ^-6 / 2.5 *10^-7
= 13/25 * 10
=130/25 = 5.20
[D]/[ED] = 5.20
D)
ΔG =RTln Kd
ΔG_2 for E and D = 1.987 * 298.15 * ln 1.3*10^-6
ΔG_2 592.454 * [ln 1.3 +ln 10^-6]
ΔG_1 = 592.424 [0.2623 - 13.8155]
ΔG_2 = -592.424 * 13.553
ΔG_1 = -8184.633 cal/ mol
ΔG_1 = -8184.633 * 4.18 J/mol = -34244.508 J?mol
ΔG_1 = -34.245 KL/mol
so, ΔG_2 = ΔG_1 - 10.5 KJ/mol
ΔG_2 = -34.245 - 10.5
ΔG_2 = -44.745KJ / mol
ΔG_2 =RT ln K_D
-44.745 *10^3
=8.314 *298.15 lnK_D
lnK_D' = - 44745 / 2478.81 g
ln K_D' = -18.051
K_D' = -18.051
K_D' = e^-18.051
[D]/[ED] = 5.20
E)
[E] = 2.5* 10 ^-7 mol/ L = a
K_D' = [E][D] / [ED'] E +D' → ED'
K_D' = a/2(x-(a/2) / (a/2)
KD' = x - a/2
=2.447 *10^-8 = (2.5/2) * 10^-7
x=2.447 * 10^-8 + 1.25 * 10^-7
x = 2.447 *10^-8 + 1.25 * 10 ^-7
x= 10^-7 [1.25 + 0.2447]
x = 1.4947 * 10^-7
[D']_T = 1.495* 10 ^-7 M
F)
K_D' = [E][D'] / [ED']
[D'] / [ED'] = KD' / [E]
[D'] / [ED'] = 1.447 *10^-8 / 2.5* 10^-7
[D'] / [ED'] = 0.5788 * 10^-1
[D'] / [ED'] = 0.0579
Explanation:
...
How many moles of Al2O3 are contained in 45.1 g of Al2O3?
Answers
Answer:
0.44mol
Explanation:
1mol/102g=xmol/45.1g
-> x=(45.1x1)/102
x=0.44mol
When you wash your hands or dishes, you probably don't use just water. In 5-7 sentences, explain what
you use to help you wash up, how it works, and why you think it works.
Answers
Hello! here is a paragraph you can use, that I type up to explain, make sure to not copy word for word of what I said. :)
What I use to wash up is soap. Soap has a certain ph level and includes acids and alkaline that enables water to mix and create soap foam to clean. Soap can come in many shapes and sizes, and can be either liquid, solid, or even foamy. I think soap works because when you use friction between your wet hands and the soap bar, you are rubbing the substances of the soap that clean your hands to clean your hands. I think the friction of the rubbing creates a layer of soap that can be used to clean, and when you increase friction the more change of the soap.
Have a great day,
I hope this helps!
Someone answer this please
To convert something in kilojoules to joules, you need to:
Multiply by 1,000
1
Divide by 1,000
2
Multiply by 1,000,000 3
Divide by 1,000,000
4
Answers
Answer:
Divide by 1000
Explanation:
Have a good day
Hope I helped
Multiply by 1000 .
I HOPE IT WILL HELP YOU.
HOPE your day goes great.
heterogeneous mixture homogeneous
How are they similar?
Answers
Answer:
By definition, a pure substance or a homogeneous mixture consists of a single phase. A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead form two separate layers. Each of the layers is called a phase.
Explanation:
What is the reason for the emission of light after the gas in a discharge tube is excited?
A)
photo-electric emission
Eliminate
B)
spontaneous radioactive reaction
C)
energy jumps by electrons due to excitation
D)
high energy reaction of the gas inside the tube
Answers
Answer:
c
Explanation:
took test on usa testprep
When gas in a discharge tube is excited to higher energy level after some seconds they return to the ground level by releasing energy in the form of light. Thus energy jumps by electron due to excitation is correct option.
What is gas discharge tube?A gas discharge tube is an electronic devise containing inert gases that ionizes and conducts results in emission of light.
When a potential is applied between the electrodes in a gas discharge tube, and the pressure is reduced, the gas particles inside forms a plasma of ions.
The electrons released when excited to higher energy level by absorbing energy and returns to the initial state by emitting energy in the form of light, the discharge tube glows.
The color emitted by the discharge tube vary based on the gas in the tube. Each type of gaseous ions emit different colors.
Therefore, the light emission in gas discharge tube is due to energy hike during electron excitation and then relaxing by emitting the light energy. Thus, option c is correct.
To find more about gas-discharge tube, refer the link below:
https://brainly.com/question/5468708
#SPJ2
Aqueous aluminium bromide and solid zinc are formed by the reaction of solid aluminum and aqueous zinc bromide. Write a balanced chemical equation for this reaction.
Answers
Answer:
3 ZnBr2(aq) + 2Al (s) ====>2AlBr3 (aq) + 3 Zn(s),
Using the ruler, what is the value of A considering significant
figures?
Answers
Answer:
13.7 cm
Explanation:
If the number is between two whole numbers then that means it is going to be a decimal, how to determine the decimal is by how many ticks/lines are between it, so if you count from 13 cm and count each line as 1 you get to the number 7 and since that number is between the whole number it becomes 13.7
A 0.450 M solution of HCl is prepared by adding some 1.50 M HCl to a 500 mL volumetric flask and diluting to the mark with deionized water. What volume of 1.50 M HCl must be added
Answers
Answer:
150 mL of 1.50 M HCL
Explanation:
So the equation you need to solve this equation is:
M1*V1=M2*V2 --> M1= Molarity of the acid you are diluting V1= Volume of the solution you need to dilute. M2=The molarity of thee solution you have made. V2=Volume of the solution you have made
M1= 1.50 M HCL
V1= Unknown
M2=0.450 M HCL
V2= 500 mL
Simple algebra says that V1= (1.5*500)/.450 = 150 mL of 1.50 M HCL
What causes the pressure in a gas
Answers
Answer:
Gas pressure is caused when gas particles hit the walls of their container. The more often the particles hit the walls, and the faster they are moving when they do this, the higher the pressure. This is why the pressure in a tyre or balloon goes up when more air is pumped in.
When 47.1 J of heat is added to 14.0 g of a liquid, its temperature rises by 1.80 ∘C. What is the heat capacity of the liquid?
Answers
Answer:
[tex]\boxed {\boxed {\sf 1.87 \J/g \textdegree C}}[/tex]
Explanation:
We are asked to find the specific heat capacity of a liquid. We are given the heat added, the mass, and the change in temperature, so we will use the following formula.
[tex]q= mc\Delta T[/tex]
The heat added (q) is 47.1 Joules. The mass (m) of the liquid is 14.0 grams. The specific heat (c) is unknown. The change in temperature (ΔT) is 1.80 °C.
q= 47.1 J m= 14.0 g ΔT= 1.80 °CSubstitute these values into the formula.
[tex]47.1 \ J = (14.0 \ g) * c * (1.80 \textdegree C)[/tex]
Multiply the 2 numbers in parentheses on the right side of the equation.
[tex]47.1 \ J = (14.0 \ g * 1.80 \textdegree C)*c[/tex]
[tex]47.1 \ J = (25.2 \ g*\textdegree C) *c[/tex]
We are solving for the heat capacity of the liquid, so we must isolate the variable c. It is being multiplied by 25.2 grams * degrees Celsius. The inverse operation of multiplication is division, so we divide both sides of the equation by (25.2 g * °C).
[tex]\frac {47.1 \ J}{(25.2 g *\textdegree C)} = \frac {(25.2 g *\textdegree C)*c}{{(25.2 g *\textdegree C)}}[/tex]
[tex]\frac {47.1 \ J}{(25.2 g *\textdegree C)} =c[/tex]
[tex]1.869047619 \ J/g *\textdegree C = c[/tex]
The original measurements of heat, mass, and temperature all have 3 significant figures, so our answer must have the same. For the number we found that is the hundredth place. The 9 in the thousandth place to the right tells us to round the 6 up to a 7.
[tex]1.87 \ J/ g * \textdegree C =c[/tex]
The heat capacity of the liquid is approximately 1.87 J/g°C.
Calculate the force needed to accelerate a 300 kg mass at 5
mls acceleration.
Answers
Explanation:
Force=mass *acceleration
F=300*5
f
F=1500N
Hehe someone help I have put down heat but I think there is another
Answers
Answer:
chemical potential enery
Mark brainliest
Calculate the number of kilograms of sodium fluoride needed per year for a city of 100,000 people if the daily consumption of water per person is 150.0 gallons.
Answers
Fluoridation is the process of adding fluorine to drinking water to avoid tooth decay.
The question is incomplete; the complete question is;
Fluoridation is the process of adding fluorine compounds to drinking water to help fight tooth decay. A concentration of 1 ppm of fluorine is sufficient for the purpose. (1 ppm means one part per million, or 1 g of fluorine per 1 million g of water.) The compound normally chosen for fluoridation is sodium fluoride, which is also added to some toothpastes. Calculate the quantity of sodium fluoride in kilograms needed per year for a city of 50,000 people if the daily consumption of water per person is 150 gallons.
(Sodium fluoride is 45.0 percent fluorine by mass. 1 gallon = 3.79 L; 1 year = 365 days; 1 ton = 2000 lb; I lb = 453.6 g; density of water = 1.0 g/mL.)
The quantity of sodium fluoride in kilograms needed per year for a city of 50,000 people if the daily consumption of water per person is 150 gallons is [tex]9.32 * 10^9 Kg[/tex].
From the question, we know that;
Daily consumption of water per person = 150 gallons.
Population of the city = 100,000 people
Total daily city consumption =[tex]100,000 * 150 gallons = 15 * 10^6 gallons[/tex]
Annual water consumption = [tex]15 * 10^6 gallons * 365 = 5.475 * 10^9 gallons[/tex]
1 gallon = 3.785 L = 3.785 kg
[tex]5.475 * 10^9 gallons = 5.475 * 10^9 gallons * 3.785 kg/ 1 gallon = 2.1 * 10^10 Kg[/tex]
Since sodium fluoride accounts for 45% by mass of water
Mass of sodium fluoride= [tex]0.45 * 2.1 * 10^10 Kg= 9.32 * 10^9 Kg[/tex]
Learn more; https://brainly.com/question/14805580
HELP! 100 points if you give a valid answer and brainliest if it's detailed!
Answers
Explanation:
The extract of plant is not done in fixed proportion
it is heterogeneous
This picture shows students working in a
chemistry laboratory. What could they do to make
their lab safer?
Label the test tubes and plastic cups.
Move the fire extinguisher closer to their
table.
Wear chemical protective gloves.
Reduce the clutter on the table.
Stand at the table instead of sitting. Tie long hair back.
DONE
Answers
Answer:
yes it is true they apply necessary safety measures
Answer: Label the test tubes, wear chemical protective gloves, tie long hair back
Explanation:
Just got it wrong
imagine you find a bowl filled with clear liquid in your kitchen list three liquids it might be
Answers
Answer: Three liquids that could fill a bowl with clear liquid in your kitchen could be alcohol, dish soap, juice (without pectin or pulp), sports drinks, and water (carbonated, coconut, flavored, or plain).
6. How many meters are in 0.00253 kilometers?
Answers
Answer:
2.53 kilometers
