Answer:
Following are the code to the given question:
def getSAOneSide(edge):#defining a method that getSAOneSide that takes edge patameter
return edge * edge#use return to calculate the edge value
def getSA(SA_one_side):#defining a method that getSA that takes SA_one_side patameter
return 6 * SA_one_side#use return to calculate the SA_one_side value
def volume(edge):#defining a method that volume that takes edge patameter
return edge * edge * edge#use return to calculate edge value
edge = int(input("Enter the length of edge of the cube:\n"))#defining edge variable that input value
SA_one_side = getSAOneSide(edge)#defining SA_one_side that holds getSAOneSide method value
print("Surface area of one side of the cube:", SA_one_side)
surfaceArea = getSA(SA_one_side)#defining a surfaceArea that holds getSA method value
print("Surface area of the cube:", surfaceArea)#print surfaceArea value
vol = volume(edge)#defining vol variable that holds Volume method value
print("Volume of the cube:", vol)#print vol Value
Output:
Please find the attached file.
Explanation:
In the code three method "getSAOneSide, getSA, and volume" method is declared that takes a variable in its parameters and use a return keyword that calculates and return its value.
In the next step,edge variable is declared that holds value from the user and defines three variable that holds method value and print its value with the message.
You are the IT administrator for a small corporate network. The employee in Office 1 needs your assistance managing files and folders. Your task is to use the command prompt to complete the following:
a. Create the D:\utilities\recover directory. Use the md or mkdir command to create (make) a directory.
b. Delete the D:\software\arch98 directory and all of its files.
c. Use the rd command to delete (remove) a directory.
d. Use the /s switch to remove the directory and all of its contents at once.
(a) mkdir /d D:\utilities\recover
or
mkdir D:\utilities\recover
(b) rd /s D:\software\arch98
Explanation:(a) To make a new directory we use the md or mkdir command followed by the name of the directory as follows;
mkdir [name_of_directory]
The name of the directory could also be a relative or absolute path depending on the request.
In the task, the specified directory uses an absolute path given as D:\utilities\recover. This path is in a drive D. Therefore, if you are in another drive different than D, to run this command, it is a great idea to do that with the /d switch.
In summary:
i. if in drive D, to make a directory D:\utilities\recover, type the following command;
mkdir D:\utilities\recover
ii. if otherwise in a different drive, type the following command.
mkdir /d D:\utilities\recover
(b) To delete a directory, we use the rd or rmdir command. If the directory has contents that also need to be deleted, we use the switch /s alongside the rd or rmdir.
In the task given, the directory to be deleted is D:\software\arch98. This includes deleting all of its files too. To do this, type the following command;
rd /s D:\software\arch98
What does the abbreviation BBC stands for?
Answer:
British Broadcasting Corporation Microcomputer System
Explanation:
The British Broadcasting Corporation Microcomputer System, or BBC Micro, is a series of microcomputers and associated peripherals designed and built by the Acorn Computer company in the 1980s for the BBC Computer Literacy Project.
Answer:
British Broadcasting Corporation
Explanation:
This is a UK company which provides television and radio news in over 40 languages. This is the computer related meaning, there are other meanings to the abbreviation but they seem irrelevant in this case.
Hope this information was of any help to you. (:
Write an application that inputs a five digit integer (The number must be entered only as ONE input) and separates the number into its individual digits using MOD, and prints the digits separated from one another. Your code will do INPUT VALIDATION and warn the user to enter the correct number of digits and let the user run your code as many times as they want (LOOP). Submit two different versions: Using the Scanner class (file name: ScanP2)
Answer:
The program in Java is as follows:
import java.util.*;
public class Main{
public static void main(String[] args) {
int n, num;
Scanner input = new Scanner(System.in);
System.out.print("Number of inputs: ");
n = input.nextInt();
LinkedList<Integer> myList = new LinkedList<Integer>();
for(int i = 0; i<n;i++){
System.out.print("Input Integer: ");
num = input.nextInt();
while (num > 0) {
myList.push( num % 10 );
num/=10;
}
while (!myList.isEmpty()) {
System.out.print(myList.pop()+" ");
}
System.out.println();
myList.clear();
}
}
}
Explanation:
This declares the number of inputs (n) and each input (num) as integer
int n, num;
Scanner input = new Scanner(System.in);
Prompt for number of inputs
System.out.print("Number of inputs: "); n = input.nextInt();
The program uses linkedlist to store individual digits. This declares the linkedlist
LinkedList<Integer> myList = new LinkedList<Integer>();
This iterates through n
for(int i = 0; i<n;i++){
Prompt for input
System.out.print("Input Integer: ");
This gets input for each iteration
num = input.nextInt();
This while loop is repeated until the digits are completely split
while (num > 0) {
This adds each digit to the linked list
myList.push( num % 10 );
This gets the other digits
num/=10;
}
The inner while loop ends here
This iterates through the linked list
while (!myList.isEmpty()) {
This pops out every element of thelist
System.out.print(myList.pop()+" ");
}
Print a new line
System.out.println();
This clears the stack
myList.clear();
}
seven and two eighths minus five and one eighth equals?
Answer: 2.125
Explanation
Frames control what displays on the Stage, while keyframes help to set up
Answer: A keyframe is a location on a timeline which marks the beginning or end of a transition. So for example, you have a movie and it transitions to another scene, keyframes tell it when and where to start the transition then when and where to stop the transition.
some machine/items/gadget having only hardware
_ is a term used for license like those issues by creative commons license as an alternative to copyright
, . , .
Explanation:
'Used for monitoring web activity by users to make sure that sensitive information won't leave the building.
A, Web server
B, FTP server
C, POP server
D, Proxy server
Answer: PROXY
Explanation:
The basic objective of the web server is to store, process and deliver web pages to the users.
FTP server is to allow users to upload and download files. An FTP server is a computer that has a file transfer protocol (FTP) address and is dedicated to receiving an FTP connection. FTP is a protocol used to transfer files via the internet between a server (sender) and a client (receiver)
pop provides access via an Internet Protocol (IP) network for a user client application to a mailbox (maildrop) maintained on a mail server
proxy server is a system that isolates internal clients from the servers by downloading and storing files on behalf of the clients. it intercepts requests for web-based or other resources that come from
Which of the following statements regarding the SAP Hana product implemented by Under Armour is NOT true?
A. All of the statements are true.
B. The program allows legacy silos to remain intact.
C. The program can run across platforms and devices.
D. The program provides real-time results.
Answer:A
Explanation:i need points
how to make an app according to peoples will
Answer:
Follow these steps to create your own app:
1)Choose your app name.
2)Select a color scheme.
3)Customize your app design.
4)Choose the right test device.
5)Install the app on your device.
6)Add the features you want (Key Section)
7)Test, test, and test before the launch.
8)Publish your app.
Explanation:
(!!_!!)
What is computer code?
A. Java Script
B. XML
C. HTML
D. Any programming language
Answer:
D
Explanation:
A capacitor of capacitance 102/π µF is connected across a 220 V, 50 Hz A.C. mains. Calculate the capacitive reactance, RMS value of current and write down the equations of voltage and current.
Answer:
The capacitive reactance will be "100Ω" and RMS value of current is "2.2 A". A further explanation is provided below.
Explanation:
Given:
[tex]C =\frac{10^2}{\pi}\times 10^{-6} \ F[/tex]
[tex]V_{RMS}=220 \ V[/tex]
[tex]f = 50 \ Hz[/tex]
Now,
The capacitive reactance will be:
⇒ [tex]X_c=\frac{1}{\omega C} =\frac{1}{2 \pi f C}[/tex]
[tex]=\frac{1}{2\times \pi\times 50\times \frac{10^{-4}}{\pi} }[/tex]
[tex]=100 \ \Omega[/tex]
RMS value of current will be:
⇒ [tex]I_{RMS}=\frac{V_{RMS}}{X_c}[/tex]
[tex]=\frac{220}{100}[/tex]
[tex]=2.2 \ A[/tex]
So that,
⇒ [tex]V_m=220\times \sqrt{2}[/tex]
[tex]=311 \ V[/tex]
⇒ [tex]I_m=2.2\times \sqrt{2}[/tex]
[tex]=3.1 \ A[/tex]
hence,
The equation will be:
⇒ [tex]\nu=311 sin31 \ 4t[/tex]
and,
⇒ [tex]i=3.1 sin(314t+\frac{\pi}{2} )[/tex]
1. The smallest unit in a digital system is a
Answer:
a bit
Explanation:
<3
What is a geam in the ggplot2 system?
a) a plotting object like point, line, or other shape
b) a method for making conditioning plots
c) a method for mapping data to attributes like color and size
d) a statistical transformation
Answer:
a) a plotting object like point, line, or other shape
Explanation:
A geom in the ggplot2 system is "a plotting object like point, line, or other shape."
A Geom is used in formulating different layouts, shapes, or forms of a ggplot2 such as bar charts, scatterplots, and line diagrams.
For example some different types of Geom can be represented as geom_bar(), geom_point(), geom_line() etc.
Write an algorithm that accepts two numbers,
divide the first number by the second and display the
quotient
What is the meaning of negative impact in technology
Answer:
the use of criminal thought by the name of education