Answer:
The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive.
The most highly reactive elements are typically found at the far left (Group 1) and far right (Group 17) of the periodic table.
Highly reactive elements in the periodic tableGroup 1 elements, also known as alkali metals, are located on the far left of the periodic table. They have one electron in their outermost energy level and are highly reactive due to their tendency to lose that electron to achieve a stable electron configuration. This makes them very reactive with water and other substances.
Group 17 elements, known as halogens, are located on the far right of the periodic table. They have seven electrons in their outermost energy level and are highly reactive due to their strong tendency to gain one electron to achieve a stable electron configuration. This makes them reactive with metals and other elements.
More on the periodic table can be found here: https://brainly.com/question/28747247
#SPJ3
P.1 is a variant of SARS-CoV2. This is the so-called "Brazil variant". It has the amino acid the substitution N501Y in the spike protein on the virus surface. In cellular fluids at ~pH 7 the wild type spike protein has a net negative charge. This substitution will make the spike protein
more negative
less hydrophobic
able to absorb move UV light
less negative
There are various variants of Cov id virus. The Brazilian variant P also known as Gamma variant is the third variant of the original SARS-CoV2.
The correct answer is more negative
This variant has raised concerns since it has ability to spread more quickly then previous variants and this is more negative variant.
It is assumed that Cov id variant Gamma and Delta has ability to absorb move UV light but this is not proved yet and research is underway.
Learn more at https://brainly.com/question/24319270
ASSINGMENT Propane react with oxygen gas to form Carbondioxide and water a. If 2.8 mole of propone react with excess oxygen ges. how many grams of Carbondioxide will be form?
Answer:
Propane (C3H8) reacts with Oxygen gas to form Carbon Dioxide and water.
a. If 2.8 moles of Propane reacts with excess Oxygen gas how many grams of CO2 will be formed?
b. How many grams of Oxygen gas will completely react with 3.8 moles of Propane?
c. If 25 g of C3H8 reacts with excess Oxygen, how many moles of water will be formed?
d. If 38 g of water are produced in the reaction, how many moles of CO2 were produced?
convert 36.52 mg to ?___ g
Answer:
0.0365 is your answer
Explanation:
hope it will help uAnswer:
365.2gㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ
Which one of these four atoms has the most neutrons?
O A.
79
Se
34
B.
80
Br
35
OC.
73
Ge
32
84
Kr
36
O D.
Answer:
kr
Explanation:
it is radioactive so it loss electron due to which it jas most neutons
Izopropanole doesn't form by Select one:
a. Reduction of propan-2-one
b. Hydration of 2-chloropropane
c. Hydration of propene
d. Reduction of propanal
Izopropanol doesn't form by Hydration of propene.
What is Reduction of propan-2-one?Acetone, propanone, or dimethyl ketone, exists as an organic compound with the formula (CH₃)₂CO. It stands for the simplest and smallest ketone. Reduction of ketones can be accomplished by hydrogenation (or) utilizing Grignard Reagent. Let us now decrease propanone to propan-2-ol by hydrogenation. The reduction of propane in the existence of catalyst platinum along with hydrogen provides the product propan-2-ol.
The correct answer is option A.
Izopropanol doesn't form by Hydration of propene.
Learn more about Reduction of propan-2-one, refer:
https://brainly.com/question/14405249
#SPJ2
A sample of Kr gas is observed to effuse through a pourous barrier in 8.15 minutes. Under the same conditions, the same number of moles of an unknown gas requires 4.53 minutes to effuse through the same barrier. The molar mass of the unknown gas is ____________ g/mol.
Answer:
25.88 g/mol
Explanation:
Graham's law is a famous law which states that the diffusion rate or the effusion rate of any gas varies inversely to the square root of the molecular weight the gas.
So from Graham's law, we have,
[tex]$\frac{\text{time}}{M^{1/2}}=\text{constant}$[/tex]
Using the sample of Kr gas having M = 83.8
[tex]$\frac{8.15}{(83.8)^{0.5}}= \frac{4.53}{M^{0.5}}$[/tex]
[tex]$M^{0.5}= 5.088$[/tex]
M = 25.88 g/mol
A 13.4 mL sample of CO2 gas was collected in an experiment.
What is this volume in liters (L)? Use significant figures, do NOT include the units.
Explanation:
here's the answer to your question
If 50.0 g of sulfuric acid and 40.0 grams of barium chloride are mixed, how many grams of sulfuric acid and how many grams of barium chloride remain after the double replacement reaction is complete?
After the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.
First, we will write the balanced equation for the reaction
H₂SO₄ + BaCl₂ → BaSO₄ + 2HCl
This means 1 mole of BaCl₂ is needed to react completely with 1 mole of H₂SO₄ to give 1 mole of BaSO₄ and 2 moles of HCl
From the question, 50.0g of sulfuric acid is mixed with 40.0 grams of barium chloride. To determine the quantity of each substance remaining after the complete reaction, we will first determine the number of moles present in each of the reactant.
For H₂SO₄
mass = 50.0g
Molar mass = 98.079 g/mol
From the formula
Number of moles = Mass / Molar mass
∴ Number of moles of H₂SO₄ = 50.0g / 98.079 g/mol
Number of moles of H₂SO₄ = 0.5098 mol
For BaCl₂
mass = 40.0 g
Molar mass = 208.23 g/mol
∴ Number of moles of BaCl₂ = 40.0g / 208.23 g/mol
Number of moles of BaCl₂ = 0.1921 mol
Since the number of moles of H₂SO₄ is more than that of BaCl₂, then H₂SO₄ is the excess reagent and BaCl₂ is the limiting reagent (that is, it will be used up completely during the reaction)
From the equation, 1 mole of H₂SO₄ is needed to completely react with 1 mole of BaCl₂
∴ 0.1921 mol of H₂SO₄ will be needed to completely react with 0.1921 mol of BaCl₂.
Therefore, after the reaction is complete, 0 mole (i.e 0 grams) of BaCl₂ will remain and (0.5098 mole - 0.1921 mole) of H₂SO₄ will remain.
Number of moles H₂SO₄ that will remain = 0.5098 mole - 0.1921 mole = 0.3177 moles
Now, we will convert this to grams
From the formula
Mass = Number of moles × Molar mass
Mass of H₂SO₄ that will remain = 0.3177 moles × 98.079 g/mol
Mass of H₂SO₄ that will remain = 31.1597 g
Mass of H₂SO₄ that will remain ≅ 31.16 g
Hence, after the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.
Learn more here: https://brainly.com/question/6857557
Below is the structure of what should be the peptide Thr-Glu-Arg-Met. However, one of these residues has been drawn incorrectly. Identify this residue
Thr
Glu
Arg
Met
Answer:
the answer is glu and I know
The residue that has been drawn incorrectly is option (B) i.e. glu .
What is glutamate residue?Glutathione consists of a glutamate residue linked to cysteine via its γ-carboxyl rather than the α-carboxyl group and followed by a conventional peptide bond between cysteine and glycine.
It plays an important role in maintaining the proper ratio of oxidized to reduced forms of metabolically important thiols such as coenzyme A.
It also provides reducing equivalents that detoxify reactive oxygen species such as peroxides.
The tripeptide is regenerated through the concerted action enzymes in the so-called γ-glutamyl cycle.
The residue that has been drawn incorrectly is glutamate residue ,hence option (B) is correct.
Learn more about glutamate residue ,here:
https://brainly.com/question/13873550
#SPJ2
How many neutrons does Carbon- 14 and Carbon -15 have? *
Answer: 8 for both
Explanation:
The element of the electron configuration is sodium. If it were to come near a fluorine atom, the sodium atom would give away its only valance electron to the fluorine atom have. That would make the sodium atom become positively charged and the fluorine atom become negatively charged.
Answer:
The answer is attached below
Explanation:
The answer is the photo attached
The Nernst equation at 20oC is:
Eion= 58 millvolts/z. [log10 (ion)out/(ion)in]
Calculate the equilibrium potential for Cl- if the concentration of Cl- outside of the cell is 100 and the concentration inside of the cell is 10 mmol/liter.
a. 58 millivolts
b. +58 millivolts
c. -116 millivolts
d. 0
Answer:
a. -58 millivolts
Explanation:
The given Nernst equation is:
[tex]E_{ion} = 58 millivolts /z \Big[ log_{10} \Big( \dfrac{[ion]_{out}}{[ion]_{in}}\Big) \Big]}[/tex]
The equilibrium potential given by the Nernst equation can be determined by using the formula:
[tex]E_{Cl^-} = \dfrac{2.303*R*T}{ZF} \times log \dfrac{[Cl^-]_{out}} {[Cl^-]_{in}}[/tex]
where:
gas constant(R) = 8.314 J/K/mol
Temperature (T) = (20+273)K
= 298K
Faraday constant F = 96485 C/mol
Number of electron on Cl = -1
[tex]E_{Cl^-} = \dfrac{2.303*8.314*298} {(-1)*(96845)} \times log \dfrac{100} {10}[/tex]
[tex]E_{Cl^-} = - 0.05814 \ volts[/tex]
[tex]\mathsf{E_{Cl^-} = - 0.05814 \times 1000 \ milli volts}[/tex]
[tex]\mathsf{E_{Cl^-} \simeq - 58\ milli volts}[/tex]
Why must oxidation be accompanied by a reduction?
A. The species being oxidized shares electron(s) with the species that is reduced
B. The species being oxidized takes electron(s) from some other
C. Electrons can be given up to free space. species being oxidized must transfer electron(s) to some othen
D. Electrons cannot just be given up to free space.
Answer:
A
Explanation:
because the species being oxidized shares electrons with the species that is reduced.making the oxidized element positively charged and the reduced element negatively charged.
I hope this helps
Alphabet:B. the species being oxidized takes electron from some other
The reversible reaction 2H2 CO <------> CH3OH heat is carried out by mixing carbon monoxide and hydrogen gases is a closed vessel under high pressure with a suitable catalyst . After equilibrium is established at high temperature and pressure, all three substances are present. If the pressure on the system is lower, with the temperature kept constant, what will be the result
Answer:
The amount of CH3OH present in the mixture would decrease
Explanation:
According to Le Cha-telier's principle, when a reaction is in equilibrium and one of the constraints that influence the rate of reactions is applied, the equilibrium would shift so as to neutralize the effects of the constraint.
In this case, looking at the equation of the reaction:
2H2 + CO <------> CH3OH + heat
the total number of moles on the reactant's (left hand) side is 3 (2+1) while on the product's (right hand) side, it is 1. If the pressure on the system is increased, more CH3OH (and less of H2 and CO) will be produced because its side has the lower number of moles out of the two sides.
If the pressure on the system is otherwise lowered, more of H2 and CO would be produced while the amount of CH3OH present would gradually decrease.
How does distance between two objects affect their gravitational force? (2 points)
a
Force increases as distance increases.
b
Force decreases as distance increases.
c
Force decreases as distance decreases.
d
Force is not related to distance.
Answer:
Option B: as the distance between the objects increases the Force of gravity decreases
I need to know what is the median of the data
Answer:
The median is also the number that is halfway into the set. To find the median, the data should be arranged in order from least to greatest. If there is an even number of items in the data set, then the median is found by taking the mean (average) of the two middlemost numbers.
I hope it helps
which of the following is is a chemical property of pure water
Answer:
Pure water has an acidity of about 7 on the pH scale. -is a chemical property of pure water. Pure water has an acidity of about 7 on the pH scale
Answer: không màu , không mùi không vị
Explanation:
A capsule containing 0.500 L of air at 1.00 atm is compressed to 3.25 atm. At that point, what is the volume of the gas in the capsule?
Answer:
V₂ = 0.154 Liters
Explanation:
Pressure => P
Volume => V
Temperature => T
mass (moles) => n
This problem...
P₁ = 1.00 ATM P₂ = 3.25 ATM
V₁ = 0.500L V₂ = ?
T₁ = constant T₂ = T₁ = constant
n₁ = constant n₂= n₁ = constant
P₁V₁/n₁T₁ = P₂V₂/n₂T₂ => V₂ = V₁(P₁/P₂) = 0.500L (1.00ATM/3.25ATM) = 0.154 Liters
PLEASE HELP I NEED THIS ASAP
Select all that apply.
The spectrum of Star S is compared to a reference hydrogen spectrum. What can be concluded about Star S?
Star S has radial motion.
Star S has transverse motion.
Star S is moving toward Earth.
Star S is moving away from Earth.
Answer:
I say Star S has radial motion
Explanation:
I'm not sure if it right but let me know if you have any other questions
Tech A says that hydrocarbons are a result of complete combustion. Tech B says that a catalytic converter creates a chemical reaction, changing carbon monoxide and hydrocarbons to water and carbon dioxide. Who is correct
Answer:
Neither Tech A nor B is correct
Explanation:
Combustion is a chemical reaction that occurs when a chemical molecule(s) interacts quickly with oxygen and produces heat.
When hydrocarbon undergoes a complete combustion reaction, they produce water and CO2.
Tech B is also incorrect because the main purpose of a catalytic converter is to accelerate and speed up the chemical reaction rates, Hence, they are not involved in chemical reaction formation. Catalytic converters are utilized as a control device in exhaust emission to lessen the effect of toxic gas fumes.
how many moles of CO2 are formed from 3.0 mol of C2H2
Answer:
50.0 moles C02
Explanation:
First write down the CORRECTLY balanced equation. NOTE: The equation you provide is incorrect.
2C2H2(g) + 5O2(g) ==> 4CO2(g) + 2H2O(g) CORRECT EQUATION
Next, look at the stoichiometric ratio of C2H2 to CO2. You can see it is 2 moles C2H2 produces 4 moles CO2.
Thus, 25.0 moles C2H2 x 4 moles CO2/2 moles C2H4 = 50.0 moles CO2
Oxide is a combination of oxygen and another element. So is Water an oxide?
Answer:
Yah, it's a neutral oxide
Explanation:
[tex]{ \bf{2H_{2(g)} +O_{2(g)} \: →2H _{2}O _{(l)} }}[/tex]
Test Question just answer random.
Answer:
U are a fool
Explanation:
Because you didn't even asked a question
Answer:
k.
Explanation:
#19.
An unknown sample weighs 45.2 g and takes 58.2 kJ to vaporize. What is
its heat of vaporization?
Select the number of valence electrons for hydrogen.
Answer:
Vanlency of hydrogen - 11
Electrons of hydrogen - 1
Answer:
The answer is: 1
Hope this helps :) <3
Explanation:
Enough of a monoprotic weak acid is dissolved in water to produce a 0.0118 M solution. The pH of the resulting solution is 2.32 . Calculate the Ka for the acid.
Answer:
1.94 × 10⁻³
Explanation:
Step 1: Calculate the concentration of H⁺ ions
We will use the definition of pH.
pH = -log [H⁺]
[H⁺] = antilog -pH = antilog -2.32 = 4.79 × 10⁻³ M
Step 2: Calculate the acid dissociation constant (Ka) of the acid
For a monoprotic weak acid, whose concentration (Ca) is 0.0118 M, we can use the following expression.
Ka = [H⁺]²/Ca
Ka = (4.79 × 10⁻³)²/0.0118 = 1.94 × 10⁻³
Which shampoo would be displayed third?
Answer:
Biolage is the answer
Explanation:
Because it's price is third most
What is the mass of carbon in 69.00 mg of co2
Answer:
18.82 mg
Explanation:
From the given information:
The molar mass of CO2 is calculated as follow
= (12 + (16 ×2))
= 44
The mass of carbon is determined by dividing the mass no of carbon from co2 by the molar mass of CO2, followed by multiplying it by 69.00 mg
= [tex](\dfrac{12}{44}\times 69 )[/tex]
=(0.2727 × 69 )
= 18.82 mg
Consider the constitutional isomers 2-methylbut-1-ene, 2-methylbut-2-ene, and 3-methylbut-1-ene. When each of these alkenes is subjected to catalytic hydrogenation (H2, Pt), a single product results. Which of the following best describes the structural relationship among these products?
a. the product are cis-trans isomers.
b. the product are identical.
c. the product are constitutional isomers.
d. the product are enantiomers.
e. the product are diastereomers.
Answer:
Explanation:
I am almost sure that the products are identical.
Match each land resource to its use.
clay - used to make steel
iron ore - used to make batteries
salt - used to make pottery and tiles
aggregate - used in construction
graphite - used as a flavoring in food
i will give 10 points and brainliest!!!
Answer:
Explanation:
We are to match each land resource to what they are being used for.
Clay →→→ used to make pottery and tiles
iron ore →→→ used to make steel
Salt →→→ used as a flavoring in food
aggregate →→→ used in construction
graphite →→→ used to make batteries
Clay is a kind of soil particle that forms as a result of weathering processes. Examples include; pottery clays, glacial clays, and deep-sea clays e.t.c. The presence of one or more clay minerals, as well as variable quantities of organic and detrital components, characterizes all of them. Clay is usually sticky and moist when wet, but hard when dry. They are used in the making of tiles and potteries.
Iron ore: The iron ore deposits are found in the Earth's crust's sedimentary rocks. They're made up of iron and oxygen that mix during the chemical process in marine and freshwater. iron ores are used to produce almost every iron and steel product that we use today.
Aggregate: are utilized in construction activities. It is a material used to mix cement, gypsum, bitumen, or lime to produce concrete in the construction industry.
Graphite: Graphite is a mineral that occurs in both igneous and metamorphic rocks. It is generally generated on the earth's surface when carbon is exposed to high temperatures and pressures. It is mainly used in the production of batteries and electrodes,
