Answer:
This is a finance lease.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
Minnetonka Company leases an asset. Information regarding the lease:
Fair value of the asset: $400,000.
Useful life of the asset: 6 years with no salvage value.
Lease term is 5 years.
Annual lease payments are $60,000
Implicit interest rate: 11%.
Minnetonka can purchase the asset at the end of the lease period for $50,000.
What type of lease is this?
The explanation of the answer is now provided as follows:
Finance lease can be described a lease in which the finance company legally owns the asset throughout the lease term, but the lessor transfers all risk and reward connected with the asset to the lessee, and the lessee also acquires the ownership of the asset at the end of the lease term.
Since Minnetonka can purchase the asset at the end of the lease period for $50,000, this implies that Minnetonka can acquires the ownership of the asset at the end of the lease term. This therefore implies that this is a finance lease.
Cox (1997) has argued that the concept of the supply chain is insufficient and that it can on
be fully understood when it is mapped with a parallel value chain.
Answer:
Due to lack of practical approaches and avoidance of normal or location-scale distributions factors, a real parallel value chain is required
Explanation:
Remaining part of Question
Justify
Solution
According to Cox there was a difference in making theoretical decision as it takes into account only normal or location-scale distributions which implies that less money is preferred over more. Several measures such as variance, standard deviation, expected or absolute values of deviation in financial engineering and financial risk management of a supply chain poses it to the downside risk and hence there is a need of parallel value chain
Prepare journal entries to record the following transactions for the village of Radnor. Classify the expenditures as Parks supplies.
a. Placed purchase order 960 for supplies in the amount of $8,000 and purchase order 961 for supplies in the amount of $6,000. The purchase orders allowed the suppliers to ship and bill for additional quantities, up to 5 percent of the order.
b. Received the supplies ordered on purchase order 960, together with an invoice for $8,300. The supplies, including the additional quantities, were accepted, and a voucher was prepared for $8,300.
c. Received all the supplies ordered on purchase order 961, together with an invoice for $5,800. The supplier said that production costs were less than anticipated, and it was passing the lower cost on to Radnor. A voucher for $5,800 was prepared.
d. The voucher for $8,300 was paid.
Answer:
A. Dr Encumbrances $14,000
Cr Budgetary fund balance $14,000
B. Dr Budgetary fund balance $8,000
Cr Reserved for encumbrances Encumbrances $8,000
Dr Expenditures – Park supplies $8,300
Cr Voucher payable $8,300
C. Dr Budgetary fund balancereserved for encumbrance $6,000
Cr Encumbrances $6,000
Dr Expenditures – Parks supplies $5,800
Cr Vouchers – payable $5,800
D. Dr Voucher payable $8,300
Cr Cash $8,300
Explanation:
Preparation of Journal entries
A. Dr Encumbrances $14,000
Cr Budgetary fund balance $14,000
($8,000+$6,000)
B. Dr Budgetary fund balance $8,000
Cr Reserved for encumbrances Encumbrances $8,000
Dr Expenditures – Park supplies $8,300
Cr Voucher payable $8,300
C. Dr Budgetary fund balancereserved for encumbrance $6,000
Cr Encumbrances $6,000
($14,000-$8,000)
Dr Expenditures – Parks supplies $5,800
Cr Vouchers – payable $5,800
D. Dr Voucher payable $8,300
Cr Cash $8,300
During June, the company purchased 160,000 pounds of direct material at a total cost of $1,056,000. The company manufactured 20,000 units of product during June using 120,800 pounds of direct materials. The price variance for the direct materials acquired by the company during June is: (Do not round intermediate calculations.)
Answer:
Results are below.
Explanation:
We were not provided with the standard cost per pound of direct material. I will assume a cost of $7 per pound.
To calculate the direct material price variance, we need to use the following formula:
Direct material price variance= (standard price - actual price)*actual quantity
Direct material price variance= (7 - 6.6)*160,000
Direct material price variance= $64,000 favorable
Actual price= 1,056,000 / 160,000= $6.6
Gabriele Enterprises has bonds on the market making annual payments, with twelve years to maturity, a par value of $1,000, and selling for $960. At this price, the bonds yield 6.5 percent. What must the coupon rate be on the bonds
Answer: 6.01%
Explanation:
To solve this question, we.will use the financial calculator. Based on the information given, then we will have:
FV = Future Value = $1,000.00
PV = Present Value = -$960.00
Bonds yield = 6.50
N = Number of years = 12
Therefore, CPT > PMT = Payment will be = $60.0973
Then, Coupon rate will be:
= Payment / Face Value
= 60.0973 / 1000
= 6.01%
Janetta Corp. has an EBIT of $1,010,000 per year that is expected to continue in perpetuity. The unlevered cost of equity for the company is 15 percent, and the corporate tax rate is 35 percent. The company also has a perpetual bond issue outstanding with a market value of $1.99 million.
Required:
What is the value of the company?
Answer:
$5,073,166.67
Explanation:
Calculation to determine the value of the company
Using this formula
VL= [EBIT(1 − TC) / R0] + TCB
Let plug in the formula
VL= [$1,010,000(1 − .35) / .15] + .35($1,990,000)
VL=[$1,010,000(0.65)/.15]+696,500
VL=($656,500/.15)+$696,500
VL=$4,376,666.67+$696,500
VL= $5,073,166.67
Therefore the value of the company is $5,073,166.67
Treasury Bonds are generally considered safer than Corporate bonds. Yet both types of fixed income instruments are subject to some sources of risk. Which sources of risk typically affect the price of domestic Corporate Bonds more than Treasury Bonds.
Answer: Liquidity risk and Default risk.
Explanation:
The sources of risk that affect the price of domestic Corporate Bonds more than Treasury Bonds are the liquidity risk and the default risk.
Treasury bonds are referred to as the government debt securities that typically have more than 20 years of maturity and earn periodic interest until they mature. Corporate bond is the bond that is issued by a corporation.
Corporate bonds typically offer list risk which is why they pay high yields this they've more default risk than the treasury bonds.
You decide to make quality improvements in order to build brand esteem. brian's the site manager is in charge of general operations and employee management, first suggestion for achieving this goal is to fill upcoming staff openings with vet tech; they will cost at least 10% more than current caregivers, but would add strong, tangible evidence of quality. they could wear special name tags to inform customers that they are canine health care professionals.
Another option is to introduce one or more high quality, tangible new products. this approach is riskier beacuse it involves a large upfront investment in inventory and because you have limited experience in retail marketing. but a product development or product diversification strategy would have potential to boost revenues while reinforcing both brand esteem and brand recognition.
how should caninecare ehance its percieved quality?
Answer:
Canine Healthcare Company
The combination of the two approaches will skyrocket Canine's brand image more than a single strategy. However, the employment of the vet technicians seems like a logical short-term measure. It must be improved by a long-term approach, which involves a high-quality product development or diversification strategy.
Explanation:
The introduction of a high-quality, tangible new product is one strategy for improving the brand esteem in the eyes of customers. Product development or diversification strategy enhances brand image, reinforces brand esteem, and increases brand awareness and recognition. Increasing the number of vet technicians employed by Canine Healthcare is another strategy to show tangible evidence of enhanced brand image and quality.
- Nhà xuất khẩu ở thành phố Hải Phòng
- Công ty mua hàng ở HongKong
- Địa điểm đưa hàng đến là thành phố Dallas, Mỹ.
Hãy lựa chọn điều kiện thương mại Incoterms 2020 thích hợp cho các trường hợp sau:
a) Hàng hóa xuất khẩu là cà phê 10.000 tấn. Sau khi làm thủ tục xuất khẩu, người bán
thuê phương tiện vận tải, trả cước phí vận tải, mua bảo hiểm cho hàng hóa. Địa điểm
chuyển giao rủi ro về hàng hóa từ người bán sang người mua sau khi hàng được giao
lên phương tiện vận tải ở nước xuất khẩu (TP. Hải Phòng).
Use the information for Geiberger Corporation from BE21.12, except assume the collectibility of the rentals is not probable. Prepare any journal entries for Geiberger on December 31, 2019.
In BE21.12
Geiberger Corporation manufactures drones. On December 31, 2019, it leased to Althaus Company a drone that had cost $120,000 to manufacture. The lease agreement covers the 5-year useful life of the drone and requires five equal annual rentals of $40,800 payable each December 31, beginning December 31, 2019. An interest rate of 8% is implicit in the lease agreement. Collectibility of the rentals is probable. Prepare Geiberger’s December 31, 2019, journal entries.
Answer:
Date Account title Debit Credit
12/31/2019 Lease Receivable $175,934
Cost of Goods sold $120,000
Sales Revenue $175,934
Inventory $120,000
Date Account title Debit Credit
12/31/2019 Cash $40,800
Deposit Liability $40,800
The rental amount is constant and is made on the first day of the lease period so this is an annuity due.
As the collectability is probable, you need to find the present value of this lease:
= 40,800 * Present value of annuity due factor, 5 year, 8%
= 40,800 * 4.3121
= $175,933.68
= $175,934
How does PESTLE help your strategic development team?
PESTLE helps in identification of business risks and threats an organization might face in the process of achieving the organizational goals.
What is PESTLE?PESTLE is a method of analysis in strategic management where there is focus on identifying the risks to the business even before the implementation of the activities.
Hence, the significance of PESTLE is aforementioned.
Learn more about PESTLE here:
https://brainly.com/question/14305249
#SPJ2
On June 8, Williams Company issued an $82,039, 7%, 120-day note payable to Brown Industries. Assuming a 360-day year for your calculations, what is the maturity value of the note
Answer:
$83,953
Explanation:
Calculation to determine the maturity value of the note
Maturity value=$82,039+($82,039*0.07*120/360)
Maturity value=$82,039+$1,914
Maturity value=$83,953
Therefore the maturity value of the note is $83,953
Compared to bonds with longer maturity, bonds with shorter maturity respond _______ dramatically to changes in interest rates.
Answer:
less.
Explanation:
A bond can be defined as a debt or fixed investment security, in which a bondholder (investor or creditor) loans an amount of money to the bond issuer (government or corporations) for a specific period of time. The bond issuer are expected to return the principal (face value) at maturity with an agreed upon interest (coupon), which are paid at fixed intervals.
A yield to maturity can be defined as the bond's total rate of return required by the secondary market.
For instance, when a bond is issued at a par or face value of £1,000, at maturity the investor would be paid £1,000. However, because bonds are being sold before maturity, it would trade below its face value.
Generally, most bonds with shorter maturity time respond less dramatically to changes in interest rates when compared to bonds having longer maturity. Thus, the risk associated with short bonds isn't really significant because their interest rates are less likely to change substantially within that short period of time unlike bonds with longer maturity.
What would you estimate as to the cost of equity if a stock sells for $40, pays a $4.25 dividend, and is expected to grow at a constant rate of 5%
Answer:
15.63%
Explanation:
Calculation to determine cost of equity
Using this formula
P = D/(r-g)
Where,
P=40
D=4.25
g=0.05
r=?
Let plug in the formula
Cost of equity=40 = 4.25/(r-0.05)
Cost of equity=r = (4.25/40)+0.05
Cost of equity=r =0.1063+0.05
Cost of equity=r =0.1563*100
Cost of equity = 15.63%
Therefore cost of equity is 15.63%
The ________ of a firm is the amount of time required for a company to convert cash invested in its operations to cash received as a result of its operations. Group of answer choices
Answer:
The cash conversion cycle of a firm is the amount of time required for a company to convert cash invested in its operations to cash received as a result of its operations.
Teshoka Corporation makes computer chips. Teshoka Corporation would be classified as a: a. Manufacturing company b. Merchandising company c. Simple company d. Service company
Answer:
a. Manufacturing company
Explanation:
Manufacturing companies are ones that specialise in making finished goods from raw materials and various components.
Production is usually done on a large scale and finished products are either sold to the final consumer or to other manufacturers who can make more complex products.
So Teshoka Corporation who make computer chips can be classified as a manufacturing company.
Amy and Ethan are married and file a joint return for 2020. Their taxable income is $192,100. The amount of their tax liability, rounded to the nearest dollar, is $ .
Answer:
$34,264
Explanation:
Given :
Taxable income = $192,100
The 2020 federal tax bracket for 2020 is given thus for married and filing jointly for return :
If taxable income falls within the bracket : ($171,051 to $326,600)
$29,211 plus 24% of the amount over $171,050
Hence, this applies to Ethan and Amy's taxable income of $192,100 ;
There taxable income is :
$29,211 + 24% of $(192,100 - 171,050)
$29,211 + (0.24 * $21,050)
$29,211 + $5,052
= $34,264
___________ are issued by administrative agencies to interpret and implement statutes enacted by a legislature
Answer:
"Regulations" is the correct answer.
Explanation:
Statutes of something like the legislative process shall be implemented or approved. Nevertheless, the statutes of elected officials or federal departments are generally understood as well as properly executed.Although most laws regulating conduct are adopted. Public administrators usually provide rules concerning the applicability as well as enforcement of statutory provisions.The owner of a bakery decides to drop the price of lemon cakes by 5%, how much does quantity sold have to rise to stop the revenue from decreasing
Answer:
5%
Explanation:
In the case when the bakery owner decided to decline the lemon cake price by 5% so here the quantity that should be sold should be increase in order to stop the revenue from reducing it by 5% as this is happen because of the price and the elasticity
So as per the given situation, the quantity sold should also be increased by 5%
Davol Corporation is preparing its Manufacturing Overhead Budget for the fourth quarter of the year. The budgeted variable manufacturing overhead rate is $6.80 per direct labor hour; the budgeted fixed manufacturing overhead is $72,000 per month, of which $20,000 is factory depreciation.
If the budgeted direct labor time for October is 5,000 hours, then the total budgeted manufacturing overhead for October is:
A) $52,000
B) $106,000
C) $54,000
D) $86,000
Answer:
B. $106,000
Explanation:
Total budgeted manufacturing overhead for October = Budgeted variable manufacturing overhead + Budgeted fixed manufacturing overhead
Total budgeted manufacturing overhead for October = ($6.8 × 5,000 hours) + $72,000
Total budgeted manufacturing overhead for October = $106,000
Kent Fuller is in the 34 percent tax bracket. A nontaxable employee benefit with a value of $2,300 would have a tax-equivalent value of:____.
a. $345.
b. $1,523.
c. $1,948.
d. $1,155.
e. 1,500.
Answer:
$3,484.85
Explanation:
Calculation to determine tax-equivalent value
Using this formula
Tax-equivalent value=Nont-taxable amount/(1-Tax rate)
Let plug in the formula
Tax-equivalent value=$2,300/(1-.34)
Tax-equivalent value=$2,300/.66
Tax-equivalent value=$3,484.85
Therefore A nontaxable employee benefit with a value of $2,300 would have a tax-equivalent value of:$3,484.85
Which of the following is a legal way for companies to avoid paying overtime
wages to their hourly workers?
A. Refuse to report their actual wages to the Department of Labor
B. Limit their working week to 40 hours
C. Ask employees to work less every other week
D. Avoid counting extra hours at the end of each week
Answer:
B limit their work week to 40 hours.
Explanation:
You can limit their hours but you can’t ask employees to not report wages they worked.
You are the owner of a local organic food market in an urban area at the crossroads of four farming communities that supply fresh, organic foods. As the owner of the market, you are interested in growing the business. Customers in the area have been asking local vendors for more organic and locally sourced fresh food options. You decide to create a catering service for clients within 25 miles of the market to celebrate the market’s 10-year anniversary. You plan to start this catering business in 30 days to address the increasing market need for organic, fresh catering. Catering orders will be prepared and packaged at the organic food market and then driven to the customer’s location. Lunch orders will be delivered within 60 minutes of receiving the order. Special event catering orders will require one week to fulfill the order. The catering company has one van that will be used exclusively for catering services.
You have identified the following goals for this catering business:
• The catering business will need to be able to sell the same quality, organic foods that are sold in-store and supplied daily.
• The catering customers can be no farther than 25 miles from the store so that food can be delivered within an hour.
• The catering business should be profitable within one year.
• The cost of developing the catering business should not negatively impact the in-store retail operations budget, staffing, events, and farmer partnerships.
You plan to launch the catering business by providing a free catered lunch to the first 10 businesses that subscribe to the weekly lunch catering services. The catered lunch for each business will be for up to 30 people and will be held at a local conference center ballroom at noon on a day of the customer’s choosing. The budget for this launch of 10 catered lunches is $7,000. Two weeks before the launch, you are working with catering staff to calculate the costs of the launch to date, review tasks that need to be completed, and assess the overall impact of catering on in-store retail operations. You learn that the costs associated with the launch of the free catered lunches have already exceeded $7,700. Additionally, a local farmer that provides the fresh lettuce for lunch salads notifies you that the lettuce will not be available in time for the catered lunch. No other local farmers have lettuce available for purchase, and the only option is to use nonorganic lettuce in order to keep the menu as communicated to the 10 businesses subscribing to the weekly lunch catering services. A financial company representative wants to inquire about possibly financing your company for this project. The representative sends a request for information to you as listed in the requirements for this task.
Task 1: Project Management
A. Discuss how you would plan the catered lunch project by completing each of the following 5 distinct project management phases:
1. Project Initiation
a. (A1A) Describe the project and the need for the project. Include information from the provided scenario for support.
b. (A1B) Identify three relevant stakeholders and discuss how the project impacts each stakeholder.
c. (A1C) Discuss whether the project is feasible by addressing each of the three triple constraint components: scope, cost, and timeline.
2. Project Planning
a. (A2A) List three milestones for the project plan and provide a timeline for each milestone.
b. (A2B) Write a SMART goal for the project.
c. (A2C) Identify two different potential risks to this project’s success and describe how each risk could be managed.
3. Project Execution
a. (A3A) Discuss a way to address being over budget by 10 percent. Include information from the provided scenario for support.
b. (A3B) Discuss a way to address a scheduling conflict that could affect the timeline of the project. Include information from the provided scenario for support.
4. Project Monitoring and Control
a. (A4A). Discuss how scheduling conflicts and budget constraints could affect the scope of the project. Include information from the provided scenario for support.
5. Project Closure
a. (A5A) Discuss two ways to change how the project was planned, considering the timeline and budget conflicts that were encountered.
At the Santa Barbara fishing hole, people come from all around to catch fish to sell at the fish market.The total number of fish caught is F= 10x−x2 where x is the number of fishermen. Suppose it costs each person $20 a day to fish and that fish sell for $10 each at the market. At the social optimum,how much would it hurt all the other fishermen (combined) if one more person started fishing?
(a) $30
(b) $20
(c) $10
(d) $40
Yoo need help ? Can anyone help me or lead me to where I can get good micro help
Answer:
Check the difference between each two / each pair if buyer and seller.
(note that the surplus could be split between them, making it effectively a win-win-scenario. but it could also be extremely good for one of them, yet just at the limit for the other one)
a) $11
b) $8
c) $6
d) add every max. buying price up ($64) and do the same with all the minimum selling prices ($33)
the difference between these two is your answer: $31
Under a job-order costing system, the dollar amount transferred from Work in Process to Finished Goods is the sum of the costs charged to all jobs:
Answer: completed in the period
Explanation:
Job order costing system refers to the system when small batches of the products are ordered by the customers. It is useful in knowing the cost that's used in the manufacturing of each product.
It's usually used when different products are being produced and the cost for each individual job need to be calculated. Under a job-order costing system, the dollar amount transferred from Work in Process to the finished goods will be the sum of the costs that's charged to all jobs that are completed in the period.
why is rent seeking bad for the economy?
Answer:
Explanation:
Rent seeking harms economic growth by reducing competition and innovation. It leads to the wasteful use of valuable resources and talents in unproductive activities and invariably redistributes resources from large unorganised populations to small organised groups.
Based on the following data for the current year, what is the inventory turnover? Sales on account during year $700,000 Cost of merchandise sold during year 270,000 Accounts receivable, beginning of year 45,000 Accounts receivable, end of year 35,000 Inventory, beginning of year 90,000 Inventory, end of year 110,000 a.2.7 b.2.5 c.3.0 d.9.7
Answer:
a. 2.7
Explanation:
Inventory turnover ratio = Cost of goods sold / Average inventory
Inventory turnover ratio = $270,000 / (($90,000 + $110,000) / 2)
Inventory turnover ratio = $270,000 / $100,000
Inventory turnover ratio = 2.7
The following describes production activities of Mercer Manufacturing for the year.
Actual direct materials used 18,000 lbs. at $4.15 per lb.
Actual direct labor used 5,555 hours for a total of $106,656
Actual units produced 30,060
Budgeted standards for each unit produced are 0.50 pound of direct material at $4.10 per pound and 10 minutes of direct labor at $20.20 per hour.
AH = Actual Hours
SH = Standard Hours
AR = Actual Rate
SR = Standard Rate
AQ = Actual Quantity
SQ = Standard Quantity
AP = Actual Price
SP = Standard Price
(1) Compute the direct materials price and quantity variances and classify each as favorable or unfavorable. (Indicate the effect of each variance by selecting for favorable, unfavorable, and no variance. Round "Cost per unit" answers to 2 decimal places.)
(2) Compute the direct labor rate and efficiency variances and classify each as favorable or unfavorable. (Indicate the effect of each variance by selecting for favorable, unfavorable, and no variance.)
Answer:
See below
Explanation:
1
Direct material price variance
= (Standard price - Actual price) × Actual quantity
= ($4.10 - $4.15) × 18,000
= -$0.05 × 18,000
= $900 Unfavorable
Direct material quantity variance
= (Standard quantity - Actual quantity) × Standard price
= (30,060 × 0.50 - 18,000) × $4.10
= (15,030 - 18,000) × $4.10
= -2,970 × $4.10
= 12,177 Unfavorable
2.
Direct labor rate variance
= (Standard rate - Actual rate) × Actual quantity
= ($20.2 - $106,656/5,555 hours) × 18,000
= ($20.2 - $19.2) × 5,555
= $1 × 5,555
= $5,555 Favourable
Direct labor efficiency variance
= (Standard quantity - Actual quantity) × Standard rate
= (10/60 × 30,060 - 5,555) × $20.2
= (5,010 - 5,555) × $20.2
= -545 × $20.2
= $11,009 Unfavourable
Select each concept with its best description by selecting its letter in the dropdowns. Focuses on quality throughout the production process. Flexible product designs can be modified to accommodate customer choices. Every manager and employee constantly looks for ways to improve company operations. Reports on financial, social, and environmental performance. Inventory is acquired or produced only as needed.Just-in-time manufacturing 2. Continuous improvements 3. Customer orientation 4. Total quality management 5. Triple bottom line
Answer:
Selection of Concept with its Best Description:
Concept Best Description
4. Total quality management Focuses on quality throughout the
production process
3. Customer orientation Flexible product designs can be modified
to accommodate customer choices.
2. Continuous improvements Every manager and employee constantly
looks for ways to improve company
operations.
5. Triple bottom line Reports on financial, social, and
environmental performance.
1. Just-in-time manufacturing Inventory is acquired or produced only
as needed.
Explanation:
1. Just-in-time manufacturing reduces manufacturing flow times and suppliers' and customers' response times. The purpose is to reduce waste and continuously improve operations.
2. Continuous improvement is a business approach that focuses on incremental or breakthrough improvement of processes, services, or products.
3. Customer orientation: An organization that has customer orientation focuses on the customer first and tries to satisfy the customer before meeting its own needs.
4. Total quality management: This is a management strategy whereby all members of the organization improve customer services, processes, products, and organizational culture in order to achieve long-term success.
5. Triple bottom line (TBL): To create greater business value, some organizations adopt the TBL performance evaluation framework, with a focus on social, environmental (or ecological) and financial performance.
is a field of study focused on understanding, explaining, and improving attitudes of individuals and groups in organizations. a. Organizational behavior b. Values in organizations c. Management d. Strategic human approach
Answer:
i think its a. Organizational behavior
