Insoluble sulfide compounds are generally black in color. which of the following combinations could yield a black precipitate?
a.Na2S(aq)+KCl(aq)
b.Li2S(aq)+Pb(NO3)2(aq)
c.Pb(CIO3)2(aq)+NaNO3(aq)
d.AgNO3(aq)+KCl(aq)
e.K2S(aq)+Sn(NO3)4(aq)

Equations 1 & 2, Equations 2&3, and Equations 1&3 illustrate a favorable energetic coupling in a cell.

What is the non-spontaneous reaction?
A nonspontaneous reaction is one that under the specified conditions, does not favour the formation of products. A reaction needs to be endothermic, accompanied by the a drop in entropy, or both to qualify as nonspontaneous. The majority of the gases that make up our atmosphere are a combination of nitrogen and oxygen.

If G is positive, the reaction is not spontaneous and will need external energy. The reaction seems to be spontaneous and will happen on its own if G is negative.

Coupling of reactions-
Equations 1 and 2-
∆G1=-7kcal/mol, ∆G2=-14.8kcal/mol
∆G total= -21.8kcal/mol( favourable reaction)
Equation 2&3-
∆G2=-14.8kcal/mol, ∆G3=+3.3kcal/mol
∆G total=-11.5kcal/mol(favourable)
Equations 3 and 4-
∆G3=+3.3kcal/mol, ∆G4= +7kcal/mol
∆G total=+10.3kcal/mol(unfavorable)
Equations 1 and 4-
∆G1=-7kcal/mol, ∆G4=+7kcal/mol
∆G total= 0(reaction will be in equilibrium)
Equations 1 and 3-
∆G total=(-7+3.3)kcal/mol
=-4.3 kcal/mol(favorable)

To learn more about the spontaneous reaction the link is given below:

https://brainly.com/question/14982377

#SPJ4

Explanation: An acidic oxide is an oxide that either produces an acidic solution upon addition to water, or acts as an acceptor of hydroxide ions effectively functioning as a Lewis acid. Examples include SO2, CO2, SO3, Cl2O7, P2O5, and N2O5.

Answer:

An acidic oxide is an oxide that either produces an acidic solution upon addition to water, or acts as an acceptor of hydroxide ions effectively functioning as a Lewis acid.[1] Acidic oxides will typically have a low pKa and may be inorganic or organic.

All tissues consist of two main components: cells and extracellular matrix, consisting of a gelatinous substance called ground substance and numerous different protein fibers.

When solutions of strontium chloride and sodium sulphate react, two of these is a spectator ion.

So, option E is correct.

What do you mean by spectator ion?

Spectator ions may be either cations (positively-charged ions) or anions (negatively-charged ions). The ion is unchanged on both sides of a chemical equation and does not affect equilibrium. When writing a net ionic equation, spectator ions found in the original equation are ignored. Thus, the total ionic reaction is different from the net chemical reaction.

Spectator Ion Examples:

Consider the reaction between sodium chloride (NaCl) and copper sulfate (CuSO4) in aqueous solution.

2 NaCl (aq) + CuSO4 (aq) → 2 Na+ (aq) + SO42- (aq) + CuCl2 (s)

The ionic form of this reaction is:

2 Na+ (aq) + 2 Cl- (aq) + Cu2+ (aq) + SO42- (aq) → 2 Na+ (aq) + SO42- (aq) + CuCl2 (s)

The sodium ions and sulfate ion are the spectator ions in this reaction. They appear unchanged in both the product and reactant side of the equation. These ions just "spectate"  while the other ions form the copper chloride. The spectator ions are canceled out of a reaction when writing the net ionic equation, so the net ionic equation for this example would be:

2 Cl- (aq) + Cu2+ (aq) → CuCl2 (s)

To know more about spectator ions from the given link:

https://brainly.com/question/9512088

#SPJ4

The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure.

It is used to demonstrate how the electrons in a molecule are positioned around particular atoms.

Electrons are shown as "dots" or, in the case of a bond, as a line connecting the two atoms. The octet rule and formal charges must be met in order to achieve the "best" electron configuration.

A Lewis structure is a visual representation of the electron distribution around atoms. The reason for learning to draw Lewis structures is to forecast the amount and type of bonds that may be formed around an atom.

Therefore, The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure.

To learn more about Lewis structure, refer to the link:

https://brainly.com/question/20300458

#SPJ1

To solve this we need to have knowledge of differential rate law which relate the rate to the concentration and time. Therefore, the rate of  overall reaction is 1x10⁻²M/s.

A differential rate law represents the rate of a reaction . According to this rate is directly proportional to changes in the concentration of reactants and inversely proportional to specific interval of time. There is another expression of rate law which is integrated rate law which is just opposite of differential rate law.

The given equation is

2NO + O[tex]_2[/tex] [tex]\rightarrow[/tex] 2NO[tex]_2[/tex]

(1/2) Rate of disappearance of NO= rate of disappearance of C= (1/2)rate of appearance of NO[tex]_2[/tex]= rate of overall reaction.

(1/2)rate of appearance of NO[tex]_2[/tex]= rate of overall reaction.

rate of appearance of NO[tex]_2[/tex]=2x10⁻²M/s.

Substituting the values in above equation

(1/2)×2x10⁻²M/s = rate of overall reaction.

rate of overall reaction= 1x10⁻²M/s

Therefore, the rate of  overall reaction is 1x10⁻²M/s.

To know more about differential rate law, here:

https://brainly.com/question/14821651

#SPJ1

Deadweight loss is potential gain that did not go to producer or the Consumer.

As a result of deadweight losscombined surplus (wealth) of the monopoly and the Consumer is less than that obtained by consumer in a competitive market.

In the given figure deadweight loss is shown by area of FHE. That is the option A is correct.

learn more about deadweight loss at

https://brainly.com/question/28044373

#SPJ1

note- complete question is attached below

Refer to the diagram to the right. The deadweight loss due to a monopoly is represented by the area

A) FHE

B) FQ1Q2E

C) FGE

D) GEH

Answer:

if an element has atomic number of 15 then the atom has 15 electrons also.

Option (b)

Explanation:

remember the atomic number of an element is also the number of protons of that element, we know that protons have a positive charge, neutrons have no charge and electrons have a negative charge.

we also know that an element is atomically neutral, meaning it overall has no charge, this is because the positive proton attracts a negative electron and hence their charges cancel off.

this is why in all elements, the atomic number(proton number) will always be equal to the electron number.

Note the neutron number cannot be predicted this way, as far as I know, the neutron purpose is mainly to add Mass to the atom so that it can be more stable, though often times the neutron number is similar to the proton number also. You're not required to learn off atomic masses as far as I know because it will be given to you in the exams

There are two molecular orbitals are needed to form one bonding molecular orbital and one anti-bonding molecular orbital.

Bond orbitals Electrons that spend most of their time between the nuclei of two atoms are placed in bonding orbitals, and electrons that spend most of their time outside the nuclei of two atoms are placed in anti-bonding orbitals.

Adding up the same number of atomic orbitals gives the same number of molecular orbitals. Two atomic orbitals combine to form two molecular orbitals. An anti-bonding orbital is essentially the opposite of a bonding orbital. They form when atomic orbitals combine in ways that lead to almost destructive interference.

Learn more about Atomic orbitals here:- https://brainly.com/question/20319149

#SPJ4

The molarity of the solution is  0.0597 M.

We know that the molarity has to do with the number of moles of the substances that is found in a  given volume of solution. Thus the term molarity has to do with the amount of substance that is present.

We have that;

Mass of the sodium chloride = 2.26g

Molar mass of the sodium chloride = 40 g/mol

Volume of the solution = 0.946 L

Number of moles = 2.26g/ 40 g/mol

= 0.0565 moles

Molarity = 0.0565 moles/0.946 L

= 0.0597 M

Learn more about molarity:https://brainly.com/question/8732513

#SPJ1

The  Sodium chloride reacts with fluorine gas to produce solid sodium fluoride and chlorine gas is 2Na+F₂→2NAF.

What is Sodium chloride ?

One of the most prevalent minerals on Earth and a crucial nutrient for many animals and plants is sodium chloride (NaCl), also known as salt. Seawater and underground rock formations are two natural sources of sodium chloride.

What is fluorine?

The most reactive element in all of chemistry is fluorine (F), which is also the first member of the halogen family. Both fluorides and fluorides-containing compounds, both organic and inorganic, are referred to by the terms "fluoride" and its ionic form (F-), respectively.

∴2Na+F₂→2NAF

Therefore, Sodium chloride reacts with fluorine gas to produce solid sodium fluoride and chlorine gas is 2Na+F₂→2NAF.

Learn more about Sodium chloride from the given link.

https://brainly.com/question/28106660

#SPJ4

Acids include hydrochloric acid (HCl) and bases include sodium hydroxide (NaOH). As a result, when they combine, they have a neutralization reaction that produces water and sodium chloride.

The pH rises to about 7 as a result of neutralization, which happens when a base and a base combine. It is a useful technique that is applied in daily life, for example when lime is added to acid soils to treat and relieve indigestion. Furthermore, neutralization results in an alkali's pH dropping to about seven.

Taking a base balances out our stomach's excess acid. Due to the formic acid in the ant sting, it can be painful. Using wet baking soda, which really is basic in nature, we can counteract this acid impact and lessen the agony brought on by the sting.

To know more about Neutralization visit:

https://brainly.com/question/11687065

#SPJ4

The initial pressure in the 50.0L bulb is 2.75 atm.

According to Boyle's law in a constant temperature, the volume of a gas is inversely proportional to its pressure.  

V ∝ 1/P  

PV = constant.

It is given to us, Initial volume(V) = 250L and Final volume(V') = 50.0 L

Say final pressure is P', that implies initial pressure P = P'- 2.20

Now, according to the concept of Boyle's law, PV = P'V'

⇒P' = PV/V'

⇒P' = (P'-2.20)*250 / 50

⇒P' = 2.75 atm

So, the initial pressure in the 50.0L bulb is 2.75 atm.

For any further details about, Boyle's Law, visit;

https://brainly.com/question/1437490

#SPJ1

Answer is option B- Oxaloacetate/aspartate is an alpha-keto acid/alpha-amino acid pair used in transamination.

To create the amino acid version of the keto-acid and the keto-acid version of the original amino acid, amino groups are removed from amino acids and transferred to acceptor keto-acids by the process of transamination.

An amino group is transferred from one molecule to another during transamination. The formation of -ketoglutaric acid and aspartic acid from the interaction of glutamic acid and oxaloacetic acid serves as an example of this.

The reversible transfer of an amino group from glutamate to oxaloacetate, which results in the production of aspartate, is physiologically catalyzed by the enzyme AST. The enzyme was therefore previously known as serum glutamic-oxaloacetic transaminase.

Hence, Oxaloacetate/aspartate is an alpha-keto acid/alpha-amino acid pair used in transamination.

To learn more about transamination refer-https://brainly.com/question/24109536

#SPJ4

1) Covering with greases on the iron  stops air and water from being in contact with the iron.

2) The substance that can react with copper to make  copper carbonate is silver carbonate

3) The combustion of lithium produces lithium oxide

4) The table is not shown hence the question can not be answered

5) another metal, oil and grease

6) The chemical reaction creates new substances.

7)  ​​A corrosion reaction is a chemical reaction that happens on the surface of a metal.

8) .In a chemical equation, the reactants and products are different from each other.

9)  ​​As silver reacts with polluted air, a black compound,  silver oxide is formed.

In the process of oxidation, we are just burning up a substance in oxygen. When we burn the substance in oxygen, there is an increase in the oxidation number of the object and oxygen is also added to the object. This is what we call oxidation of a substances.

Now we know that oxygen is abundant in the universe and thus it can be used in the burning of a substances. In effect we can look at the process of combustion as a situation in which we burn an object in air.

Learn more about oxidation:https://brainly.com/question/9496279

#SPJ1

Answer: 0.2 g

Explanation:

Ionic bonding is expected in KF because in it one is metal and one is non-metal which is essential to form an ionic bond.

What is Ionic bonding?

Ionic bonding is a kind of chemical bonding that includes the electrostatic attraction among oppositely charged ions, or among two atoms with sharply different electronegativities, and is the number one interplay taking place in ionic compounds. It is one of the primary styles of bonding alongside with covalent bonding and metal bonding. Ions are atoms (or organizations of atoms) with an electrostatic charge. Atoms that advantage electrons make negatively charged ions (called anions). Atoms that lose electrons make undoubtedly charged ions (called cations). This switch of electrons is thought as electrovalence in assessment to covalence.

To know more about ionic bonding, click here- brainly.com/question/13526463

#SPJ1

False, Protons and neutrons are both present in the nucleus.

What is the nuclear force?

One of the four fundamental forces of nature, along with gravitational and electromagnetic forces, is the nuclear force. In fact, they are also referred to as strong forces since they are 10 million times more powerful than chemical binding forces. A force known as the nuclear force interacts with the protons and neutrons of atoms. The force that holds protons and neutrons in a nucleus together is known as the nuclear force. Protons and protons, neutrons and neutrons, or neutrons and neutrons can all be affected by this force. The nucleus is held together by this force.

The nucleus is at the center of an atom and accounts for the maximum mass of the atoms, a nucleus contains both protons and neutrons giving it an overall positive charge because the neutrons are of neutral or zero charges. As electrons are negatively charged and are very light in comparison to a proton or neutron, it is considered negligible in front of them. Due to the negative charge of the electron, it is under an attractive force known as the nuclear force from the nucleus, as we know opposite charges attract.

To know more about neutrons, click the link given

https://brainly.com/question/15559400

#SPJ4

A measure of how compact matter is is what density means. How much "stuff" is crammed into an area, to put it simply.

In science, density is defined as the ratio of an object's mass to volume. Mathematical and scientific density comparisons are done using a formula.

In disciplines, such as physics, the focus is on things and matter and relates the notion to the rules of nature.

It is a calculable and manipulable formula in mathematics. In other disciplines, such as social sciences, density relates with population. The amount of people in a specific land area produces the population density.

Therefore, A measure of how compact matter is is what density means. How much "stuff" is crammed into an area, to put it simply.

To learn more density, refer to the link:

https://brainly.com/question/15164682

#SPJ1

Social engineering types of infiltration techniques does one open up to by posting sensitive personal information and details about one's workplace on social networking sites.

What is the which means social engineering?

Social engineering is an assault vector that is predicated closely on human interplay and frequently includes manipulating human beings into breaking regular safety techniques and satisfactory practices to benefit unauthorized get entry to systems, networks or bodily places or for economic benefit.

Is social engineering a cybercrime?

Social engineering is a manipulation approach that exploits human blunders to benefit personal information, get right of entry to, or valuables. In cybercrime, these “human hacking” scams generally tend to trap unsuspecting customers into exposing data, spreading malware infections, or giving get right of entry to constrained systems.

To know more about social engineering, click here- brainly.com/question/26072214

#SPJ4

Chemists have categorized different sorts of modifications in the same way that they have categorized elements and compounds.

Changes are classified as either physical or chemical changes. Chemists investigate the transformations that matter can go through to learn a lot about the nature of stuff.

Physical changes and chemical changes are the two different types of changes that chemists examine.

A physical change is when a sample of matter experiences a change in some of its qualities but not in its identity. Water vapor is created when liquid water is heated.

Therefore, Chemists have categorized different sorts of modifications in the same way that they have categorized elements and compounds.

To learn more about physical change, refer to the link:

https://brainly.com/question/17931044

#SPJ1

Amontons's law, Charles's law, Boyle's law and Avogadro's law are applied in ideal gas equation.

According to Boyle's Law, gas volume grows as pressure lowers. According to Charles' Law, a gas expands in volume as its temperature rises. Additionally, Avogadro's Law states that as gas concentration rises, so does its volume. The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles neither attract nor repel one another and occupy any space (have no volume).

Hence, ideal gas equation summation of individual gas laws.

To know more about Boyle's law

https://brainly.com/question/1437490

#SPJ4

Each iron tablet contains 152 g of iron.

The substance listed here is iron sulfate, and its chemical formula is FeSO4.

The compound's relative formula mass is calculated by multiplying the atomic masses of its constituent parts, and it is then given in grams.

The atomic mass of Fe = 55.845

The atomic mass of  S = 32.065

The atomic mass of   O = 15.994

So;

Relative formula mass is calculated as 55.845 + 32.065 + 4(15.994)  = 151.886g

Therefore, the solution is 152g

A particle's or object's mass, a dimensionless quantity, is used to represent how much matter is there (symbolized m).  The kilogram is the chosen unit of mass according to the International System (SI) (kg).

In physics, mass is a way to quantify inertia, a fundamental property of all matter.

To read more about mass, visit https://brainly.com/question/21178027

#SPJ4

For the combustion of 1 mole of diamond at room temperature, the standard entropy change is 6.22 J/K mol.

The reaction is given as :

C (diamond)  + O₂   ----->  CO₂

At room temperature the value of S°  is given as follows :

carbon, C = 2.38 J / Kmol

oxygen, O₂ = 205.2 J/Kmol

carbon dioxide, CO₂ = 213.8 J/Kmol

The standard entropy change is given as :

ΔS° = ∑S° product  - ∑ S° reactant

ΔS° = ( 213.8 ) - ( 2.38 + 205.2)

ΔS° = 213.8 - 207.58

ΔS° = 6.22  J / K mol

The standard entropy change for the combustion of 1 mole of diamond at room temperature is 6.22  J / K mol.

learn more about standard entropy here

https://brainly.com/question/24278877

#SPJ4

To solve the given problems, there are some rules for naming these compounds in coordination chemistry.

Some other rules for writing formula-

Now, as per the given questions we can write the formulas-

a) [tex]K_{3}[Cr(C_{2}O_{4})_{3}][/tex]

b) [tex][Co(en)_{3}]_{4} [Mn(CN)_{5}I]_{3}[/tex]

c) [tex][Al(H_{2}O) _{2}(NH_{3}) _{2}BrCl]NO_{3}[/tex]

Know more about coordination compounds at:

https://brainly.com/question/27289242

#SPJ1

The separation compound using diffrence in boiling point melting point like physical properties.

What is physical properties.

A physical property is the any  measurable property that  whose value describes the state of a physical in  system. Changes in the  system's physical properties of  can be used to describe its transitions between the  momentary of state.

A physical property is a characteristic of the  matter that is not associated with in a  change in its chemicals composition. Familiar to the  examples of physical  properties that is include density, color, hardness, melting and boiling points, and the  electrical conductivity.

There are mainly two types of physical properties extensive and intensive.

Sol-The separation scheme to  used to separate the mixture of   based on differences in this  physical properties- such as boiling point melting point, solubility in a given solvent these are the three components.

To know more about physical properties click-

https://brainly.com/question/26549181

#SPJ4

The equation to use Hfusion to calculate the energy needed to melt a mass of solid is Grams solid × mol/g × H fusion

what is Hfusion?

The heat of fusion is the amount of heat required to turn 1 g of solid into a liquid without causing a change in temperature.

1Kg×1/H fusion ×g/mol solid

Numerous everyday household products have been produced using the heat of fusion technique, which has numerous other uses. Melting ice into water is the most typical application of the heat of fusion. Manufacturing is where you'll find the great majority of instances of heat of fusion in use. The following examples have been in use for many centuries and are still refined today. Heat of fusion is a necessary step in the production of things such as coins, glass, forged metal, and household goods made from blow-molded plastic.

To learn more about Hfusion https://brainly.com/question/20258697

#SPJ1

The Solubility cannot be calculated.

Solubility indicates the maximum amount of a substance that can be dissolved in a solvent at a certain temperature. Such a solution is called saturated. Divide the mass of the compound by the mass of the solvent and multiply by 100g to calculate the solubility in g/100g.

The solubility of ionic solutes does not always increase with increasing temperature. In exothermic solution reactions, solubility can decrease with increasing temperature. The number of moles of solute dissolved in a given volume of solution does not represent the solubility of the solution. They dissolve more readily and solubility increases with increasing temperature.

Learn more about The Solubility here:- https://brainly.com/question/23946616

#SPJ4