Answer:
entropy
Explanation:
A cylinder rotating about its axis with a constant angular acceleration of 1.6 rad/s2 starts from rest at t = 0. At the instant when it has turned through 0.40 radian, what is the magnitude of the total linear acceleration of a point on the rim (radius = 13 cm)?
a. 0.31 m/s^2
b. 0.27 m/s^2
c. 0.35 m/s^2
d. 0.39 m/s^2
e. 0.45 m/s^2
Answer:
The magnitude of the total linear acceleration is 0.27 m/s²
b. 0.27 m/s²
Explanation:
The total linear acceleration is the vector sum of the tangential acceleration and radial acceleration.
The radial acceleration is given by;
[tex]a_t = ar[/tex]
where;
a is the angular acceleration and
r is the radius of the circular path
[tex]a_t = ar\\\\a_t = 1.6 *0.13\\\\a_t = 0.208 \ m/s^2[/tex]
Determine time of the rotation;
[tex]\theta = \frac{1}{2} at^2\\\\0.4 = \frac{1}{2} (1.6)t^2\\\\t^2 = 0.5\\\\t = \sqrt{0.5} \\\\t = 0.707 \ s\\\\[/tex]
Determine angular velocity
ω = at
ω = 1.6 x 0.707
ω = 1.131 rad/s
Now, determine the radial acceleration
[tex]a_r = \omega ^2r\\\\a_r = 1.131^2 (0.13)\\\\a_r = 0.166 \ m/s^2[/tex]
The magnitude of total linear acceleration is given by;
[tex]a = \sqrt{a_t^2 + a_r^2} \\\\a = \sqrt{0.208^2 + 0.166^2} \\\\a = 0.266 \ m/s^2\\\\a = 0.27 \ m/s^2[/tex]
Therefore, the magnitude of the total linear acceleration is 0.27 m/s²
b. 0.27 m/s²
A fisherman in a stream 39 cm deep looks downward into the water and sees a rock on the stream bed. How deep does the stream appear to the fisherman
Answer:
30cm
Explanation:
assume that the eyes are substantially above the water so that sin(theta) is approximately theta.
( small angle approximation).
The point at which a ray leaving the fish hits the surface of the water is x to the side of the centreline and the depth of the water is d
x/d = sin( angle of incidence)
if the apparent depth of the water is h then
x/h = sin( angle of refraction)
and applying snells law
1 sin ( theta air) = 1.33 sin( theta water)
1 * x/h = 1.33 * x/d
d/h = 1.33
or h/d = 1/1.33
h/39 = 1.33
h = 39 /1.33 so that is the apparent depth of the stream assuming:-
1. Your eyes are almost directly overhead
and
2. your eyes are a significant distance above the surface of the water.
x/d = 1.33 x/h
h/d =39/1.3
= 30cm
It's nighttime, and you've dropped your goggles into a 3.2-m-deep swimming pool. If you hold a laser pointer 1.2 m above the edge of the pool, you can illuminate the goggles if the laser beam enters the water 2.0 m from the edge.
How far are the goggles from the edge of the pool?
Answer:
Explanation:
Laser angle with water surface is given by: Tan α = 1/2.0= 0.5/
α = 26.56°
Laser angle with Normal = 90 - 26.56 = 63.44 °
Assuming a red laser, refractive index in water is 1.331.
Angle of refraction in water is given by:
Ref Ind = Sin i / Sin r
1.331 = Sin 63.44 / Sin r
Sin r = 0.8945 / 1.331 = 0.6721
Angle r = 42.22°
For the path in water:
Tan 42.22 = x / 3.2
x = 2.9m where x is the lateral displacement of the laser ince it hits the water
So the goggles are 2.0 + 2.9 = 4.9 m from edge of pool
A quantity of an ideal gas is compressed to half its initial volume. The process may be adiabatic, isothermal or occurring at constant pressure. Rank those three processes in order of the work required of an external agent, least to greatest. A : adiabatic, isothermal, constant pressure B : constant pressure, isothermal, adiabatic C : adiabatic, constant pressure, isothermal D : isothermal, adiabatic, constant pressure E : constant pressure, adiabatic, isothermal
Answer:
B. constant pressure, isothermal, adiabatic
Explanation:
A quantity of an ideal gas is compressed to half its initial volume.
The process may be adiabatic, isothermal or occurring at constant pressure.
Adiabatic-constant heat
Constant pressure or isobaric
Isothermal or constant temperature
An external agent is a system that does work on a system or a machine.
This external agent applies force , or changes the state of the body it is acting on.
In order of the work required of an external agent, least to greatest
The following processes will be arranged.
constant pressure, isothermal, adiabatic
a radio antenna emits electromagnetic waves at a frequency of 100 mhz and intensity of what is the photon density
Answer:
photon density = 1.0 × [tex]10^{16}[/tex] photon/m³
Explanation:
given data
frequency f = 100 mhz = 100 × [tex]10^{6}[/tex] Hz
we consider here intensity I = 0.2 W/m²
solution
we take here plank constant is h i.e = 6.626 × [tex]10^{-34}[/tex] s
and take energy density is E
so here
E × C = I
E = [tex]\frac{I}{C}[/tex] ................1
here C = 3 × [tex]10^{8}[/tex] m/s
so photon density is
photon density = [tex]\frac{I}{C} \times \frac{1}{f \times h}[/tex] ...............2
photon density = [tex]\frac{0.2}{3 \times 10^8} \times \frac{1}{100 \times 10^6 \times 6.626 \times 10^{-34} }[/tex]
photon density = 1.0 × [tex]10^{16}[/tex] photon/m³
Three capacitors C1 = 10.7 µF, C2 = 23.0 µF, and C3 = 29.3 µF are connected in series. To avoid breakdown of the capacitors, the maximum potential difference to which any of them can be individually charged is 125 V. Determine the maximum energy stored in the series combination.
Answer:
E = 1336.71875 J
Explanation:
We are given;. Capacitance of Capacitor 1; C1 = 10.7 µF
Capacitor 2; C2 = 23.0 µF
Capacitor 3; C3 = 29.3 µF
Supply voltage;V = 125 V
Formula for capacitance in series is;
Capacitors in series circuit: C(eq) = 1/C(1) +1/C(2) +1/C(3) .......
Thus, equivalent capacitance is;
C(eq) = (1/10.7) + (1/23) + (1/29.3) = 0.1711 µF = 0.1711 × 10^(6) F
Now, the formula for maximum energy stored is;
E = ½ × C(eq) × V²
E = ½ × 0.1711 × 10^(-6) × 125²
E = 1336.71875 J
Lamar has been running sprints to prepare for his next football game.He has found that he can maintain his maximum speed for 45 yards.He’s thinking of running in a 5km race in a few months,but doesn’t know if he can maintain his maximum speed for the entire 5 km.Can you help him determine how far he can?
Answer:
Kindly check explanation
Explanation:
Length of race = 5km
Maximum speed = 45 yards
Converting from yards to kilometer :
1km = 1093.613 yards
x = 45 yards
(1093.613 * x) = 45
x = 45 / 1093.613
x = 0.0411480 km
Where x = maximum length for which he can maintain his maximum speed expressed in kilometers.
Therefore, with the available information, it can be concluded that Lamar cannot maintain his maximum speed for the entire 5km race and will only be able maintain his maximum speed for 0.0411 kilometers.
Lamar cannot maintain his maximum speed for the entire 5km race and will only be able maintain his maximum speed for 0.0411 kilometers.
The calculation is as follows;
Length of race = 5km
Maximum speed = 45 yards
Converting from yards to kilometer :
1km = 1093.613 yards
x = 45 yards
[tex](1093.613 \times x) = 45[/tex]
[tex]x = 45 \div 1093.613[/tex]
x = 0.0411480 km
here x represent maximum length for which he can maintain his maximum speed expressed in kilometers.
Learn more: https://brainly.com/question/3617478?referrer=searchResults
What happens when two polarizers are placed in a straight line, one behind the other? A. They allow light to pass only if they are polarized in exactly the same direction. B. They block all light if they are polarized in exactly the same direction. C. They allow light to pass only if their directions of polarizations are exactly 90° apart. D. They block all light if their directions of polarizations are exactly 90° apart. E. They block all light if their directions of polarizations are either exactly the same or exactly 90° apart.
Answer:
C
They allow light to pass only if their directions of polarizations are exactly 90° apart.
A 3200-lb car is moving at 64 ft/s down a 30-degree grade when it runs out of fuel. Find its velocity after that if friction exerts a resistive force with magnitude proportional to the square of the speed with k
Answer:
The velocity is 40 ft/sec.
Explanation:
Given that,
Force = 3200 lb
Angle = 30°
Speed = 64 ft/s
The resistive force with magnitude proportional to the square of the speed,
[tex]F_{r}=kv^2[/tex]
Where, k = 1 lb s²/ft²
We need to calculate the velocity
Using balance equation
[tex]F\sin\theta-F_{r}=m\dfrac{d^2v}{dt^2}[/tex]
Put the value into the formula
[tex]3200\sin 30-kv^2=m\dfrac{d^2v}{dt^2}[/tex]
Put the value of k
[tex]3200\times\dfrac{1}{2}-v^2=m\dfrac{d^2v}{dt^2}[/tex]
[tex]1600-v^2=m\dfrac{d^2v}{dt^2}[/tex]
At terminal velocity [tex]\dfrac{d^2v}{dt^2}=0[/tex]
So, [tex]1600-v^2=0[/tex]
[tex]v=\sqrt{1600}[/tex]
[tex]v=40\ ft/sec[/tex]
Hence, The velocity is 40 ft/sec.
A spring is hung from the ceiling. When a block is attached to its end, it stretches 2.5 cm before reaching its new equilibrium length. The block is then pulled down slightly and released. What is the frequency of oscillation?
Answer:
0.99Hz
Explanation:
Using F= -mx ( spring force)
At equilibrium the gravitational force will be balanced by the spring force so mg= kx
K= mg/ 0.25 N/m
But
Frequency f= 1/2pi √g/0.25
Frequency is 0.99Hz
The block is pulled down slightly and released so, Frequency of oscillation is 3.15 Hz
Frequency of oscillation based problem:What information do we have?
Length starched = 2.5 cm
F = Kx
We know that
F = mg
So,
mg = Kx
K/m = g/x
[tex]f=\frac{1}{2\pi}\sqrt{\frac{g}{x} }\\f=\frac{1}{2\pi}\sqrt{\frac{9.8}{0.025} }[/tex]
Frequency of oscillation = 3.15 Hz
Find out more information about 'Oscillation'.
https://brainly.com/question/16016711?referrer=searchResults
"If a beam of monochromatic light is passed though a slit of width 15 μm and the second order dark fringe of the diffraction pattern is at an angle of 5.2o from the central axis, what is the wavelength of the light?"
Answer:
λ= 5.4379 10⁻⁷ m = 543.79 nm
Explanation:
The phenomenon of diffraction is described by the expression for destructive diffraction is
a sin θ = (m + 1/2) λ
λ = a sin θ / (m + 1/2)
let's reduce the magnitudes to the SI system
a = 15 um = 15 10⁻⁶ m
m = 2
θ = 5.2º
Let's calculate
λ = 15 10⁻⁶ sin 5.2 / (2 +1/2)
λ = 5.4379 10⁻⁷ m
Let's reduce to nm
λ= 5.4379 10⁻⁷ m = 543.79 nm
A bullet is fired from a rifle pointed 45 degrees above horizontal. The bullet leaves the muzzle traveling 1400 m/s. How many seconds does it take the bullet to reach the high point of its trajectory?
The bullet's vertical velocity at time [tex]t[/tex] is
[tex]v=1400\dfrac{\rm m}{\rm s}-gt[/tex]
where [tex]g=9.80\frac{\rm m}{\mathrm s^2}[/tex] is the acceleration due to gravity.
At its highest point, the bullet's vertical velocity is 0, which happens
[tex]0=1400\dfrac{\rm m}{\rm s}-gt\implies t=\dfrac{1400\frac{\rm m}{\rm s}}g\approx\boxed{142.857\,\mathrm s}[/tex]
(or about 140 s, if you're keeping track of significant figures) after being fired.
A balloon contains 1.21 x 105 L of ideal gas at 265K. The gas is then cooled to 201 K. What is the volume (L) assuming no gas enters or exits the balloon
Answer:
The new volume will be 0.918 x 10^5 L
Explanation:
initial volume [tex]V_{1}[/tex] = 1.21 x 10^5 L
Initial temperature [tex]T_{1}[/tex] = 265 K
Final volume [tex]V_{2}[/tex] = ?
Final temperature [tex]T_{2}[/tex] = 201 K
Th gas is an ideal gas.
For ideal gases, the equation [tex]V_{1}[/tex]/[tex]T_{1}[/tex] = [tex]V_{2}[/tex]/[tex]T_{2}[/tex] = constant
substituting value, we have
(1.21 x 10^5)/265 = [tex]V_{2}[/tex]/201
[tex]V_{2}[/tex] = 24321000/265 = 91777.4 L
= 0.918 x 10^5 L
how many stars are in our solar system?
Answer:
there are over 100 billion stars in our galaxy.
a toy propeller fan with a moment of inertia of .034 kg x m^2 has a net torque of .11Nxm applied to it. what angular acceleration does it experience
Answer:
The angular acceleration is [tex]\alpha = 3.235 \ rad/s ^2[/tex]
Explanation:
From the question we are told that
The moment of inertia is [tex]I = 0.034\ kg \cdot m^2[/tex]
The net torque is [tex]\tau = 0.11\ N \cdot m[/tex]
Generally the net torque is mathematically represented as
[tex]\tau = I * \alpha[/tex]
Where [tex]\alpha[/tex] is the angular acceleration so
[tex]\alpha = \frac{\tau }{I}[/tex]
substituting values
[tex]\alpha = \frac{0.1 1}{ 0.034}[/tex]
[tex]\alpha = 3.235 \ rad/s ^2[/tex]
Unpolarized light is passed through three successive Polaroid filters, each with its transmission axis at 45.0° to the preceding filter. What percentage of light gets through?
Answer:
The percentage is [tex]k = 12.5 \%[/tex]
Explanation:
From the question we are told that
The axis is is at [tex]\theta = 45 ^o[/tex]
Generally the of intensity light emerging from the first polarizer is mathematically represented as
[tex]I_{1} = \frac{I_o}{ 2}[/tex]
Where [tex]I_o[/tex] is the intensity of unpolarized light
Now the light emerging from the second polarizer is mathematically represented as
[tex]I_2 = I_ 1 * cos ^2(\theta )[/tex]
[tex]I_2 = \frac{I_o}{2} * cos ^2(45 )[/tex]
[tex]I_2 = \frac{I_o}{2} * \frac{1}{2} = \frac{I_o}{4}[/tex]
Now the light emerging from the third polarizer is mathematically represented as
[tex]I_3 = I_ 2 * cos ^2(\theta )[/tex]
[tex]I_3 = \frac{I_o}{4} * cos ^2(45 )[/tex]
[tex]I_3 = \frac{I_o}{8}[/tex]
Now the percentage of the intensity of light that emerged with respect to the intensity of the unpolarized light is
[tex]k = \frac{\frac{I_o}{8} }{I_o } * 100[/tex]
[tex]k = 12.5 \%[/tex]
The percentage of light that gets through the three successive Polaroid filters is; 12.5%
We are given;
Angle of transmission axis; θ = 45°
Formula for intensity of light from first polarizer is;
I₁ = ¹/₂I₀
Formula for intensity of light from second polarizer is;
I₂ = I₁cos²θ
Formula for intensity of light from third polarizer is;
I₃ = I₂cos²(90 - θ)
Combining the 3 equations;
Put ¹/₂I₀ for I₁ in second formula to get;
I₂ = ¹/₂I₀cos²θ
Put ¹/₂I₀cos²θ for I₂ in third formula to get;
I₃ = ¹/₂I₀cos²θ*cos²(90 - θ)
Plugging in 45° for θ gives;
I₃ = ¹/₂I₀cos²45*cos²(90 - 45)
⇒ I₃ = ¹/₂I₀cos²45*cos²45
⇒ I₃ = ¹/₂I₀cos⁴45
Now, cos 45 in surd form is 1/√2. Thus;
I₃ = ¹/₂I₀(1/√2)⁴
I₃ = ¹/₂I₀(¹/₄)
I₃ = ¹/₈I₀
I₃/I₀ = ¹/₈
I₃/I₀ = 0.125
In percentage form, we have;
I₃/I₀ = 12.5%
Read more about unpolarized light at; https://brainly.com/question/1444040
A father and his son want to play on a seesaw. Where on the seesaw should each of them sit to balance the torque?
Answer:
A The father should sit closer to the pivot.
C The longer wrench makes the job easier because less force is needed when there is more distance from the pivot.
A As far from the head of the hammer as possible because this will maximize torque.
D at the opposite side of the seesaw towards the middle
:) gl
Explanation:
If a father and his son want to play on a seesaw then to balance the torque of the seesaw the father should sit near the pivot as he had more weight as compared to his son, while the son should sit a little farther from the pivot point as compared to his father.
What is the mechanical advantage?
Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.
Mechanical advantage = output force(load) /input force (effort)
As given in the problem statement If a father and his son wish to play on a seesaw,
The father should sit close to the pivot because he weighs more than his son, and the son should sit a little farther away from the pivot point than his father. This will help balance the torque of the seesaw.
Thus, the father should sit near the pivot on the one side and the son should sit a little farther from the pivot of a seesaw on the other side.
Learn more about Mechanical advantages, here
brainly.com/question/16617083
#SPJ2
A nearsighted person has a far point that is 4.2 m from his eyes. What focal length lenses in diopters he must use in his contacts to allow him to focus on distant objects?
Answer:
-0.24diopters
Explanation:
The lens is intended that makes an object at infinity appear to be 4.2 m away, so do=infinity, dI = - 4.2m (minus sign because image is on same side of lens as object)
So 1/do +1/di = 1/f
1/infinity + 1/-4.2 = 1/f
1/f = 1/-4.2 = -0.24diopters
A diffraction grating with 161 slits per centimeter is used to measure the wavelengths emitted by hydrogen gas. At what angles in the first-order spectrum would you expect to find the two violet lines of wavelength 434 nm and of wavelength 410 nm
Answer:
[tex]\theta_1 = 0.400^o[/tex]
[tex]\theta_2 =0.378^o[/tex]
Explanation:
From the question we are told that
The number of slits per cm is k = [tex]161\ slits\ per\ cm = 161 \ slits\ per\ 0.01 m[/tex]
The order of the maxima is n = 1
The wavelength are [tex]\lambda_1 = 434 nm = 434 *10^{-9} \ m \ \ \ , \lambda_2 = 410nm = 410 *10^{-9} \ m[/tex]
The spacing between the slit is mathematically represented as
[tex]d = \frac{ 0.01}{k}[/tex]
=> [tex]d = \frac{ 0.01}{161}[/tex]
=> [tex]d = 6.211 *10^{-5} \ m[/tex]
Generally the condition for constructive interference is
[tex]n\lambda = d \ sin \theta[/tex]
At [tex]\lambda_1[/tex]
[tex]\theta _1 = sin^{-1} [ \frac{1 * 434 *10^{-9}}{6.211 *10^{-5}} ][/tex]
[tex]\theta_1 = 0.400^o[/tex]
At [tex]\lambda_2[/tex]
[tex]\theta _2 = sin^{-1} [ \frac{1 * 410 *10^{-9}}{6.211 *10^{-5}} ][/tex]
[tex]\theta_2 =0.378^o[/tex]
A city of punjab has 15 percemt chance of wet weather on any given day. What is probability that it will take a week for it three wet weather on 3 sepaprate days? Also find it standard deviation
Answer:
The probability that it will take a week for it three wet weather on 3 separate days is 0.06166 and its standard deviation is 0.9447
Explanation:
We are given that A city of Punjab has 15 percent chance of wet weather on any given day.
So, Probability of wet weather = 0.15
Probability of not being a wet weather = 1-0.15 =0.85
We are supposed to find probability that it will take a week for it three wet weather on 3 separate days
Total number of days in a week = 7
We will use binomial over here
n = 7
p =probability of failure = 0.15
q = probability of success=0.85
r=3
Formula :[tex]P(r=3)=^nC_r p^r q ^{n-r}[/tex]
[tex]P(r=3)=^{7}C_{3} (0.15)^3 (0.85)^{7-3}\\P(r=3)=\frac{7!}{3!(7-3)!} (0.15)^3 (0.85)^{7-3}\\P(r=3)=0.06166[/tex]
Standard deviation =[tex]\sqrt{n \times p \times q}[/tex]
Standard deviation =[tex]\sqrt{7 \times 0.15 \times 0.85}[/tex]
Standard deviation =0.9447
Hence The probability that it will take a week for it three wet weather on 3 separate days is 0.06166 and its standard deviation is 0.9447
Warm blooded animals are homeothermic; that is, they maintain an approximately constant body temperature. (Forhumans it's about 37 oC.) When they are in an environment that is below their optimum temperature, they use energy derived from chemical reactions within their bodies to warm them up. One of the ways that animals lose energy to their environment is through radiation. Every object emits electromagnetic radiation that depends on its temperature. For very hot objects like the sun, that radiation is visible light. For cooler objects, like a house or a person, that radiation is in the infrared and is invisible. Nonetheless, it still carries energy. Other ways that energy is lost by a warm animal to a cool environment includes conduction (direct touching of a cooler object) and convection (cooler air moving and carrying thermal energy away). See Heat Transfer for a discussion of all three.
For this problem, we'll just consider how much energy an animal needs to burn (obtain from internal chemical reactions) in order to stay warm just from radiation losses. The rate at which an object loses energy through radiation is given by the Stefan-Boltzmann equation:
Rate of energy loss = AεσT4
where T is the absolute (Kelvin) temperature, A is the area of the object, ε is the emissivity (unitless and =1 for a perfect emitter, less for anything else), and σ is the Stefan-Boltzmann constant:
σ = 5.67 x 10-8 J/(s m2 K4)
Consider a patient trying to sleep naked in a cool room (55 oF = 13 oC). Assume that the person being considered is a perfect emitter and absorber of radiation (ε = 1), has a surface area of about 2.5 m2, and a mass of 80 kg.
a. A person emits thermal radiation at a rate corresponding to a temperature of 37 oC and absorbs radiation at a rate (from the air and walls) corresponding to a temperature of 13 oC. Calculate the individual's net rate of energy loss due to radiation (in Watts = Joules/second).
net rate of energy loss = Watts
b. Assume the patient produces no energy to keep warm. If they have a specific heat about equal to that of water (1 Cal/kg-oC) how much would their temperature fall in one hour? (1 Cal = 1kcal = 103 cal)
ΔT = oC
c. Given that the energy density of fat is about 9 Cal/g, how many grams of fat would the person have to utilize to maintain their body temperature in that environment for one hour?
amount of fat needed = g
Answer:
a) 360.7 J/s
b) 16.23 °C
c) 34.48 g
Explanation:
The mass of the person = 80 kg
The person is a perfect emitter, ε = 1
surface area of the person = 2.5 m^2
a) If he emits radiation at 37 °C, [tex]T_{out}[/tex] = 37 + 273 = 310 K
and receives radiation at 13 °C, [tex]T_{in}[/tex] = 13 + 273 = 286 K
Rate of energy loss E = Aεσ([tex]T^{4} _{out}[/tex] - [tex]T^{4} _{in}[/tex] )
where σ = 5.67 x 10^-8 J/(s m^2 K^4)
substituting values, we have
E = 2.5 x 1 x 5.67 x 10^-8 x ([tex]310^{4}[/tex] - [tex]286^{4}[/tex]) = 360.7 J/s
b) If they have specific heat about equal to that of water = 1 Cal/kg-°C
but 1 Cal = 1 kcal = 10^3 cal
specific heat of person is therefore = 10^3 cal/kg-°C
heat loss = 360.7 J/s = 360.7 x 3600 = 1298520 J/hr
heat lost in 1 hour = 1 x 1298520 = 1298520 J
This heat lost = mcΔT
where ΔT is the temperature fall
m is the mass
c is the specific heat equivalent to that of water
the specific heat is then = 10^3 cal/kg-°C
equating, we have
1298520 = 80 x 10^3 x ΔT
1298520 = 80000ΔT
ΔT = 1298520/80000 = 16.23 °C
c) 1298520 J = 1298520/4184 = 310.35 Cal
density of fat = 9 Cal/g
gram of fat = 310.35/9 = 34.48 g
A laser used for many applications of hard surface dental work emits 2780-nm wavelength pulses of variable energy (0-300 mJ) about 20 times per second.part a. Determine the number of photons in one 80-mJ pulse.part b. Determine the average power of photons in one 80-mJ pulse during 1 s.
Answer:
a
[tex]n = 1.119 *10^{18} \ photons[/tex]
b
[tex]P = 1.6 \ W[/tex]
Explanation:
From the question we are told that
The wavelength is [tex]\lambda = 2780 nm = 2780 *10^{-9} \ m[/tex]
The energy is [tex]E = 80 mJ = 80 *10^{-3} \ J[/tex]
This energy is mathematically represented as
[tex]E = \frac{n * h * c }{\lambda }[/tex]
Where c is the speed of light with a value [tex]c = 3.0 *10^{8} \ m/s[/tex]
h is the Planck's constant with the value [tex]h = 6.626 *10^{-34} \ J \cdot s[/tex]
n is the number of pulses
So
[tex]n = \frac{E * \lambda }{h * c }[/tex]
substituting values
[tex]n = \frac{80 *10^{-3} * 2780 *10^{-9}}{6.626 *10^{-34} * 3.0 *10^{8} }[/tex]
[tex]n = 1.119 *10^{18} \ photons[/tex]
Given that the pulses where emitted 20 times in one second then the period of the pulse is
[tex]T = \frac{1}{20}[/tex]
[tex]T = 0.05 \ s[/tex]
Hence the average power of photons in one 80-mJ pulse during 1 s is mathematically represented as
[tex]P = \frac{E}{T}[/tex]
substituting values
[tex]P = \frac{ 80 *10^{-3}}{0.05}[/tex]
[tex]P = 1.6 \ W[/tex]
Some radar systems detect the size and shape of objects such as aircraft and geological terrain. Approximately what is the smallest observable detail (in m) utilizing 495 MHz radar?
Answer:
0.61 m
Explanation:
The smallest observable length by the radar must be at least equal to or greater than the wavelength of the radar.
using the relationship
c = fλ
where
c is the speed of light in vacuum = 3 x 10^8 m/s
f is the frequency of the wave = 495 MHz = 4.95 x 10^8 Hz
λ is the wavelength = ?
λ = c/f = (3 x 10^8)/(4.95 x 10^8) = 0.61 m
answer to your question is 0.6m
Several books are placed on a table. These books have a combined weight of 25 N and cover an area of 0.05 m2. How much pressure do the books exert on the table? The pressure the books apply to the table top is __ Pa.
Answer:
500 PascalsExplanation:
[tex]Force = 25N\\Area = 0.05m^2\\\\Pressure = \frac{Force}{Area}\\ \\Pressure = \frac{25}{0.05}\\\\ Pressure = 500 Pascals[/tex]
A large reflecting telescope has an objective mirror with a 14.0 m radius of curvature. What angular magnification in multiples does it produce when a 3.25 m focal length eyepiece is used? ✕
Answer:
The magnification is [tex]m = -2.15[/tex]
Explanation:
From the question we are told that
The radius is [tex]r = 14.0 \ m[/tex]
The focal length eyepiece is [tex]f_e = 3.25 \ m[/tex]
Generally the objective focal length is mathematically represented as
[tex]f_o = \frac{r}{2}[/tex]
=> [tex]f_o = \frac{14}{2}[/tex]
=> [tex]f_o = 7 \ m[/tex]
The magnification is mathematically represented as
[tex]m = - \frac{f_o }{f_e }[/tex]
=> [tex]m = - \frac{7 }{ 3.25 }[/tex]
=> [tex]m = -2.15[/tex]
What is the answer?
Answer: i think it is d. none of them.
Explanation: The speed of light in a vacuum is 186,282 miles per second and so when you look and the answer choices and the question it doesnt make any since.
A satellite of mass m circles a planet of mass M and radius R in an orbit at a height 2R above the surface of the planet. What minimum energy is required to change the orbit to one for which the height of the satellite is 3R above the surface of the planet
Answer:
ΔE = GMm/24R
Explanation:
centripetal acceleration a = V^2 / R = 2T/mr
T= kinetic energy
m= mass of satellite, r= radius of earth
= gravitational acceleration = GM / r^2
Now, solving for the kinetic energy:
T = GMm / 2r = -1/2 U,
where U is the potential energy
So the total energy is:
E = T+U = -GMm / 2r
Now we want to find the energy difference as r goes from one orbital radius to another:
ΔE = GMm/2 (1/R_1 - 1/R_2)
So in this case, R_1 is 3R (planet's radius + orbital altitude) and R_2 is 4R
ΔE = GMm/2R (1/3 - 1/4)
ΔE = GMm/24R
As you finish listening to your favorite compact disc (CD), the CD in the player slows down to a stop. Assume that the CD spins down with a constant angular acceleration. If the CD rotates clockwise (let's take clockwise rotation as positive) at 500 rpm (revolutions per minute) while the last song is playing, and then spins down to zero angular speed in 2.60 s with constant angular acceleration, the angular acceleration of the CD, as it spins to a stop at -20.1 rad/s 2. How many revolutions does the CD make as it spins to a stop?
Answer:
10.8rev
Explanation:
Using
Wf²-wf = 2 alpha x theta
0²- 56.36x56.36/ 2(-20.13) x theta
Theta = 68.09 rad
But 68.09/2π
>= 10.8 revolutions
Explanation:
I MIND TRICK PLZ HELP LOL
Troy and Abed are running in a race. Troy finishes the race in 12 minutes. Abed finishes the race in 7 minutes and 30 seconds. If Troy is running at an average speed of 3 miles per hour and speed varies inversely with time, what is Abed’s average speed for the race?
Answer:
Explanation:
Let the race be of a fixed distance x
[tex]Average Speed = \frac{Total Distance}{Total Time}[/tex]
Troy's Average speed = 3 miles/hr = x / 0.2 hr
x = 0.6 miles
Abed's Average speed = 0.6 / 0.125 = 4.8 miles/hr
(4) Use the preliminary observations to answer these questions; Compared to no polarizer or analyzer in the optical path, by what percent does the light intensity decrease when (a) The polarizer is introduced into the optical path? (b) The both polarizer and analyzer are introduced into the optical path?
Answer:
a) I = I₀/2, b) I = I₀/2 cos² θ
Explanation:
To answer these questions, let's analyze a little the way of working of a polarized
* When a non-polarized light hits a polarizer, the electric field that is not in the direction of the polarizer is absorbed, so the transmitted light is
i = I₀ / 2
and is polarized in the direction of the polarizer
* when a polarized light reaches the analyzer it must comply with Malus's law
I = I₁ cos² θ
where the angle is between the polarized light and the analyzer.
With this, let's answer the questions
a) When a polarizer is placed in the non-polarized light path, half of it is absorbed and only the light that has polarization in the direction of the polarizer is transmitted with an intensity of
I = I₀/2
b) when a polarizer and an analyzer are fitted, the intensity of the light transmitted by the analyzer is
I = I₀/2 cos² θ
where the final value depends on the angle between the polarizer and the analyzer.
Let's look at two extreme cases
θ = 0 I = Io / 2
θ = 90º I = 0
