is boiling a physical, or chemical change?(Worth 50 POINTS!)

Answer:

5. Element J has the highest atomic number

6. Elements G and L have the same number of electrons in their outermost shell.

Explanation:

The periodic table of elements is a table which shows the arrangement of the elements in the order of increasing atomic number. Starting from the topmost left-hand side of the table where the element with the least atomic number is placed, and going across the table from left to right and down to the lowest point to the right of the table, where the element with the highest atomic number is located, the atomic number of elements progressively increases.

Looking at the table, it can be seen that the element J is found at the lowest point to the right of the table. Therefore, element J has the highest atomic atomic number.

6. In the periodic table, elements are arranged into groups and periods. The groups are the columns while the periods are the rows. Elements in the same column or group have the same number of electrons in their outermost shell. Therefore, element G and L have the same number of electrons in their outermost shell.

Answer:

1.9g of F₂ were consumed in the reaction

Explanation:

Based on the chemical reaction:

2NaCl + F₂ →  2 NaF + Cl₂

Where 2 moles of NaCl react per mole of F₂ to produce 2 moles of NaF and 1 mole of Cl₂

To understand in a better way how the reaction occurs we need to convert each mass of compound to moles:

Moles of NaCl -Molar mass: 58.44g/mol-:

5.4g * (1mol / 58.44g) = 0.092 moles NaCl

Moles of NaF -Molar mass: 41.988g/mol-:

4.9g * (1mol / 41.998g) = 0.12 moles NaF

Moles of Cl₂ -Molar mass: 70.90g/mol-:

3.7g * (1mol / 70.90g) = 0.052 moles Cl₂

That means approximately 0.1 moles of NaCl react with 0.05 moles of F₂ to produce 0.1moles of NaF and 0.05 moles of Cl₂.

0.05 moles of F₂ are:

0.05 moles * (38g/mol) =

Answer:

The water level in the pipe went down.] ... [The hot water in the cup heated up the water particles inside the bottle. They began to move more. Greater motion (kinetic energy) pushed the particles farther apart, resulting in expansion.

Answer: Selective breeding?

Explanation:

A farmer has bred his pineapple plants from the sweetest pineapples from his last harvest to get even sweeter pineapple plants. This is an example of selective breeding.

By determining which male and female animals or plants will normally reproduce sexually and generate offspring together, people can employ animal and plant breeding to selectively acquire specific phenotypic features.

But excessive selective breeding can result in the emergence of hereditary diseases. And in fact, many dog breeds today experience major health problems as a result of their excessive physical characteristics. Health issues known as genetic illnesses are brought on by "flaws" in a person's genome.

Through artificial selection, several fruits and vegetables have been enhanced or even created. Selective breeding was very useful in creating broccoli, cauliflower, and cabbage from the wild mustard plant.

Thus, This is an example of selective breeding.

To learn more about selective breeding, follow the link;

https://brainly.com/question/461245

#SPJ2

Answer:

it will transverse wave I think it will help you

Answer:

c

Explanation:

9.6724 g MgO

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Stoichiometry

Step 1: Define

[RxN - Balanced] 2Mg + O₂ → 2MgO

[Given] 5.8332 g Mg

Step 2: Identify Conversions

[RxN] 2 mol Mg = 2 mol MgO

Molar Mass of Mg - 24.31 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of MgO - 24.31 + 16.00 = 40.31 g/mol

Step 3: Stoichiometry

Step 4: Check

Follow sig fig rules and round. We are given 5 sig figs.

9.67241 g MgO ≈ 9.6724 g MgO

Answer:

9.6730

Explanation:

i just did the quiz

Answer:

Explanation:

(1) The primary industry is mainly agriculture, which includes agricultural, forestry, animal husbandry and fishery components. Agriculture is the foundation of social economy. (2) The secondary industry, which mainly includes the industrial and construction industries.

Answer:hope this help

Explanation:

Answer:

True is the Answer.

Explanation:

True.

Answer:

have a p000000000000000000

Answer:

1)2kclo3=2kcl+3o2

2)2NaCl+F2=2NaF+cl2

3)Pb(OH)2+2HCl=2H2O+PbCl2

4)2Albr3+3k2so4=6kbr+al2(so4)3

5)CH4+2O2=CO2+2H2O

Answer:

According to avogadro's law, 1 mole of every substance contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles and weighs equal to its molecular mass.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]

[tex]\text{Number of moles}=\frac{\text{Given molecules}}{\text {Avogadros number}}[/tex]

a. moles in 14.08 g of [tex]C_{12}H_{22}O_{11}[/tex] = [tex]\frac{14.08g}{342.3g/mol}=0.04113moles[/tex]

molecules in 14.08 g of [tex]C_{12}H_{22}O_{11}[/tex] = [tex]0.04113\times 6.023\times 10^{23}=0.2477\times 10^{23}[/tex]

b. moles in 17.75 g of NaCl = [tex]\frac{17.75g}{58.5g/mol}=0.3034moles[/tex]

molecules in 17.75 g of [tex]NaCl[/tex] = [tex]0.3034\times 6.023\times 10^{23}=1.827\times 10^{23}[/tex]

formula units 17.75 g of [tex]NaCl[/tex] = [tex]0.3034\times 6.023\times 10^{23}=1.827\times 10^{23}[/tex]

c. moles in 20.06 g of  [tex]CuSO_4.5H_2O[/tex]= [tex]\frac{20.06g}{249.68g/mol}=0.08034moles[/tex]

formula units in 20.06 g of  [tex]CuSO_4.5H_2O[/tex]= [tex]0.08034\times 6.023\times 10^{23}=0.4839\times 10^{23}[/tex]

Answer:

6

Explanation:

ye

Answer:

1. 4 Km

2. 40 minutes

3. 0.1 Km/min

Explanation:

1. Determination of the total distance travelled.

From the graph given in the question above, we can see that the total distance travelled by the object is 4 Km since the path taken by the object in the graph ends at the 4 km mark.

2. Determination of the Time taken.

A careful observation of the graph given in the question shows that the entire trip took 40 minutes since the distance travelled by the object ends at the 40 minutes mark on the graph.

3. Determination of the average speed of the object.

Total distance = 4 Km

Total time = 40 mins

Average speed =..?

Average speed = Total distance / total time

Average speed = 4 / 40

Average speed = 0.1 Km/min

Answer:

481.6x10^23

Explanation:

Answer:

[tex]\boxed {\boxed {\sf About \ 4.82 *10^{24} \ atoms \ K_2CrO_4}}[/tex]

Explanation:

To convert from moles to atoms, Avogadro's Number must be used.

This number tells us how many particles (atoms, molecules, ions. etc.) in 1 mole of a substance. In this case, it is atoms of potassium chromate (K₂CrO₄) in 1 mole.

[tex]6.022*10^{23} \ atoms \ K_2CrO_4 / 1 \ mol \ K_2CrO_4[/tex]

Use this number as a fraction.

[tex]\frac{6.022*10^{23} \ atoms \ K_2CrO_4}{1 \ mol \ K_2CrO_4}[/tex]

Multiply by the given number of moles (8.00).

[tex]8.00 \ mol \ K_2CrO_4 *\frac{6.022*10^{23} \ atoms \ K_2CrO_4}{1 \ mol \ K_2CrO_4}[/tex]

The moles of potassium chromate will cancel.

[tex]8.00 *\frac{6.022*10^{23} \ atoms \ K_2CrO_4}{1}[/tex]

The denominator of 1 can be ignored.

[tex]8.00 *(6.022 *10^{23} \ atoms \ K_2CrO_4)[/tex]

Multiply.

[tex]4.8176*10^{24} \ atoms \ K_2CrO_4[/tex]

The original measurement of moles (8.00) has 3 significant figures, so we must round our answer to 3 sig figs.

For the number we calculated, that is the hundredth place. The 7 in the thousandth place tells us to round the 1 up to a 2.

[tex]4.82 *10^{24} \ atoms \ K_2CrO_4[/tex]

There are about 4.82* 10²⁴ atoms of potassium chromate in 8.00 moles.

Answer:

1.08 x 10²⁵molecules

Explanation:

From the mole concept we know that ;

      1 mole of any substance contains 6.02 x 10²³ molecules

This number is the Avogadro's number.

 So;

  18 mole of CH will contain:

       Number of molecules of CH  = 18 x 6.02 x 10²³ = 1.08 x 10²⁵molecules

The number of molecules is therefore 1.08 x 10²⁵molecules

Answer:

A derived unit is defined as the unit that is created from a  product of SI base units. Volume is an example of derived unit because it is not possible to measure volume directly using any measuring device For eg., Volume of water in bucket is can not be measured using rule, or scale, or any other measuring device.

Hence, volume is a derived unit.

Answer:

oxygen makes up 21 percent of the atmosphere

Answer: thay can't make cells

Explanation:

Answer:

V = 5.74 L

Explanation:

Given data:

Volume of carbon dioxide produced = ?

Temperature and pressure = standard

Mass of calcium carbonate = 25.6 g

Solution:

Chemical equation:

CaCO₃      →        CaO + CO₂

Number of moles of calcium carbonate:

Number of moles = mass / molar mass

Molar mass of calcium carbonate = 100 g/mol

Number of moles = 25.6 g/ 100 g/mol

Number of moles = 0.256 mol

Now we will compare the mole of calcium carbonate with carbon dioxide.

                       CaCO₃           :            CO₂

                            1                :             1

                         0.256          :         0.256

Volume of  CO₂:

PV = nRT

R = general gas constant = 0.0821 atm/L / mol.K

By putting values,

1 atm× V = 0.256 mol × 0.0821 atm/L / mol.K× 273.15 K

V = 5.74 atm/L / 1 atm

V = 5.74 L

Answer:

399.88 [tex]\frac{4.05*10^{23} }{6.022*10^{23} }[/tex] =269

Explanation:

399.88 is the molar mass of iron(III) sulfate.

The mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.

To calculate the molar mass of Fe2(SO4)3, we need to determine the atomic masses of the individual elements involved and multiply them by their respective subscripts:

Fe2(SO4)3 consists of 2 iron atoms, 3 sulfur atoms, and 12 oxygen atoms:

Molar mass of Fe2(SO4)3 = (2 * 55.845) + (3 * 32.06) + (12 * 16.00) = 159.69 g/mol

To calculate the mass of 4.05 × 10^23 formula units of Fe2(SO4)3, we can use the molar mass:

Mass = (4.05 × 10^23) * (159.69 g/mol) = 6.48 × 10^25 g

Rounded to two decimal places, the mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.

More on formula units can be found here: https://brainly.com/question/33740227

#SPJ6

Answer:

45.9m

Explanation:

Given parameters:

Mass of the ball  = 1kg

Initial velocity  = 30m/s

Unknown:

Height the ball will travel  = ?

Solution:

At the maximum height, the final velocity of the ball  will be 0;

  Using ;

   V²   = U²   - 2gh

V is the final velocity

U is the initial velocity

g is the acceleration due to gravity

h is the height

     0² = 30²   - (2 x 9.8 x h)

    0 = 900 - 19.6h

      h  = 45.9m

Answer:

b thats just what i do

Explanation:

Explanation:

A. taxonomic/dichotomous key

B.Domains Bacteria and Archaea are made up of prokaryotic cells.

Answer: Different parts of the sun rotate at different rates.

Explanation:

The statement that best describes the motion of the sun is that different parts of the sun rotate at different rates.

First and foremost, we should note that the rotation of the sun is on its axis and also the sun isn't a solid. Due to this, its motion will be that there'll be rotation of different part of it at different rates. Assuming the sun was solid, then all of its parts will move together.

Answer:

Different parts of the sun rotate at different rates.

Explanation: pic proof

Answer:

Explanation:

The reaction expression is given as:

           ⁴⁰₁₈ Ar   →   X  +  ⁰₁B  

To solve this problem, we must bear in mind that both mass number and atomic number must be conserved.

 So;

For the mass number:

               40  = A + 0

                 A  = 40

For atomic number:

                 18  = Z + 1

                  Z = 18 - 1  = 17

An atom is identifiable by the atomic number. Since the atomic number of X is 17 then it is Cl, chlorine