Answer:
It is illegal
Explanation:
Fracking involves drilling deep into the earth crust in which a water mixture with high pressure is directed at the rock with the purpose of releasing the gas inside. This process is common in the exploration of natural gas and other hydrocarbons.
It is however illegal because the water are mostly contaminated due to the hydrocarbons present and harmful to life. It is advisable and the best to remove the water and recycle them in treatment plants
The pressure of a gas in a cylinder when it is heated to a temperature of 250k is 1.5 atm. What was the initial temperature of the gas if it’s initial pressure was 1 atm?
Answer:
[tex]T1=166.66K[/tex]
Explanation:
According to Gay-Lussac’s law simply states that the ratio of the initial pressure and temperature is equal to the ratio of the final pressure and temperature for a gas of a fixed provided that the mass is kept at a constant volume.
Given:
Initial pressure, P1 = 1 atm
Final pressure, P2 = 1.5 atm
Final temperature, T2 = 250 K
The law can be applied using the below formula
P1T2 = P2T1
Then,
T1 = (P1T2)/P1 = (1*250)/(1.5) = 166.66 Kelvin.
[tex]T1=166.66K[/tex]
:
Answer:
[tex]T_1=166.7K[/tex]
Explanation:
Hello,
In this case, by applying the Gay-Lussac's law which help us to understand the pressure-temperature gas behavior via a directly proportional relationship:
[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
In such a way, as we are asked to compute the initial temperature knowing the initial pressure and final both temperature and pressure, so we solve for it:
[tex]T_1=\frac{T_2P_1}{P_2}=\frac{250K*1atm}{1.5atm} \\\\T_1=166.7K[/tex]
Best regards.
what happens when light is not spread out
Answer:
Spreading out a wave over a larger area just causes the wave strength to weaken, but does not cause gaps to form. Therefore, if you look at photons as waves, spatial gaps never form in light as it travels through free space, no matter how dim it gets.Spreading out a wave over a larger area just causes the wave strength to weaken, but does not cause gaps to form. Therefore, if you look at photons as waves, spatial gaps never form in light as it travels through free space, no matter how dim it gets
Explanation:
True or False? The Grand Canyon was probably formed through wind abrasion.
Answer:
True.
Explanation:
Wind abrasion is a form of erosion.
Hope I helped ya.
< Sarah >
A 0.050L solution of Ba(OH)2 is neutralized by 0.072L of a 0.55 M HNO3 solution. What is the concentration of the Ba(OH)2 solution?
Answer:
0.396M
Explanation:
Step 1:
The balanced equation for the reaction. This is given below:
2HNO3 + Ba(OH)2 —> Ba(NO3)2 + 2H2O
From the balanced equation above,
The mole ratio of the acid (nA) = 2
The mole ratio of the base (nB) = 1
Step 2:
Data obtained from the question. This include the following:
Volume of base (Vb) = 0.05L
Concentration of base (Cb) =..?
Volume of acid (Va) = 0.072L
Concentration of acid = 0.55 M
Step 3:
Determination of the concentration of the base, Ba(OH)2.
The concentration of the base, Ba(OH)2 can be obtained as follow:
Cava /CbVb = nA/nB
0.55 x 0.072 / Cb x 0.05 = 2/1
Cross multiply to express in linear form
Cb x 0.05 x 2 = 0.55 x 0.072
Divide both side by 0.05 x 2
Cb = (0.55 x 0.072) / (0.05 x 2)
Cb = 0.396M
Therefore, the concentration of the base, Ba(OH)2 is 0.396M
In the graph above for the dissociation of a strong acid, why do the bars for H3O+ and A- have the same height as the bar for HA?
Answer:
The concentration of HA is the same as concentration of H3O+ and A- produced.
Explanation:
The dissociation equation is given below:
HA(aq) + H2O (l) —> H3O+(aq) + A-(aq)
From the reaction above, we can see that the acid is monoprotic acid i.e it has only 1 ionisable hydrogen atom.
Now, from the balanced equation, we can see that the acid produced equal concentration of H3O+ and A-.
This account for the reason why the bars for H3O+ and A- have the same height as the bar for HA.
Which term describes this reaction?
A- addition
B- condensation
C- elimination
D- substitution
Answer:
C.
Explanation:
This is a reaction of elimination, because the water was removed and because of it double bond is formed.
why is the international space station in orbit
Answer:
The ISS provides a location in the relative safety of low Earth orbit to test spacecraft systems that will be required for long-duration missions to the Moon and Mars.
Explanation:
HELP PLEASE I WILL GIVE 100 PONTS
All of the following properties of a solution would decrease if you increased the concentration of solute, EXCEPT which?
A. freezing point
B. boiling point
C. vapor pressure
D. they would all decrease
Answer:
boiling point
Explanation:
(02.02 MC)
How is Earth's surface most likely to change in a place that experiences strong sand storms?
Answer:
Mechanical weathering will cause wearing down of rocks.
Explanation:
All the other choices aren't suitable for a dry climate where sand storms occur.
PLZZZ HELP CHEM!!!!!!! Easy points!!!!!
Answer:
H+
Explanation:
Answer:
OH-
Explanation:
An Arrhenius base is any species that increases the concentration of
OH
1.
__________ are the most organized state of matter.
Solids
Liquids
Gases
2.
States of matter change when ________ is added or removed.
Plasma
Energy
3.
Which state of matter has the most movement of its particles?
Solid
Liquid
Gas
Solids are the most organized state of matter. States of matter change when energy is added or removed. Gas is the state of matter has the most movement of its particles.
What are the states of matter?The states of matter are the different forms of the matter in which it can exist. They are solids, liquids and gases. Solids are the states of matter in which molecules are very near to each other. They have fixed shape and volume. Liquids is the states of matter in which molecules are a little far from each other. They have different shape and fixed volume. Gas is the states of matter in which molecules are a very far from each other. They have different shape and different volume.
There are two more states of matter which are called as Plasma, Bose Einstein Condensate.
Plasma have highest energy and Bose Einstein Condensate have lowest energy.
Therefore, Solids are the most organized state of matter. States of matter change when energy is added or removed. Gas is the state of matter has the most movement of its particles.
To learn more about States of matter click:
https://brainly.com/question/29069107
#SPJ3
If I add water to 100mL of a 0.15M NaOH solution until the final volume is 150mL, what will the molarity of the diluted solution be?
A. 0.100M
B. 1.2M
C. 0.01M
D. 52.8M
Answer : A
0,15 moles of NaOH -------in-------1000ml
x moles of NaOH ---------in-------100ml
x= 0,015 moles of NaOH
final volume =150ml
0,015 moles of NaOH -------in------150ml
x moles of NaOH ------in--------1000ml
x= 0,1 moles of NaOH
What organelle does the process of cellular respiration?
Answer:
Mitochondria
Explanation:
The mitochondrion is the site of cellular respiration. The first part of cellular respiration (glycolysis) happens in the cytoplasm. The second part of cellular respiration needs oxygen, and it occurs in mitochondria.
3 hazards that occur in teaching and learning of science
In most mirrors, the virtual image appears to come from behind the mirror. True False
Answer
False
Explanation:
What is the name of C3H8?
Answer:
Propane
Explanation:
What are some true statements about light
Answer:It allows us to see things so we know where we are going that’s why at night we had lamp posts
Explanation:
pH of a 0.00072 M HCl solution.
Answer:
3.14
Explanation:
pH=-log(H+)
- Hope that helps! Please let me know if you need further explanation.
In the water cycle diagram above, which letter represents
groundwater?
Select One:
Q
S
T
R
Answer:t
Explanation:bc
How killers cover up their crimes
Answer:
They hide their evidence and destroy any if absolutely necessary. You also would need to wear gloves, so you dont put your identity everywhere. Also, you need to flee and just forget that what you did, did not happen. And hope you dont get arrested xD
Explanation:
What is the molariity of a 50.0 mL aqueous solution containing 10.0 grams of copper (II) sulfate, CuSO4?
Answer:
The molarity is 1.26 [tex]\frac{ moles}{L}[/tex]
Explanation:
Molarity is a unit of concentration that is based on the volume of a solution and represents the number of moles of solutes contained in a liter. The molarity of a solution is calculated by dividing the moles of the solute by the liters of the solution and is expressed in units (moles / liter).
[tex]Molarity=\frac{number of moles of solute}{Volume}[/tex]
You must calculate the number of moles of CuSO₄. So, being:
Cu: 63.54 g/moleS: 32 g/moleO: 16 g/molethe molar mass of CuSO₄ is
CuSO₄=63.54 g/mole + 32 g/mole + 4* 16 g/mole= 159.54 g/mole
Then it is possible to apply the following rule of three: if 159.54 g of CuSO₄ are present in 1 mole, 10 g in how many moles are they?
[tex]moles=\frac{10 g*1 mole}{159.54 g}[/tex]
moles= 0.063 moles
Then:
number of moles of solute= 0.063 molesVolume= 50 mL= 0.05 L (Being 1L=1000 mL)Replacing in the definition of molarity:
[tex]Molarity=\frac{0.063 moles}{0.05 L}[/tex]
Molarity= 1.26 [tex]\frac{ moles}{L}[/tex]
The molarity is 1.26 [tex]\frac{ moles}{L}[/tex]
Convert 4.6 atm to mmHg.
Do liquids have higher coefficients of expansion than solids do
Answer: yes they do.
Explanation:
I'm tryna get more points because my other account got blocked for the next 48 hours.
(Don't be mad at me please)
How many moles of H2 are needed to produce 18 moles NH3 in the reaction below?
N2 + 3 H2 —> 2 NH3
Answer:
27 moles of H₂
Explanation:
Equation of reaction:
N₂ + 3H₂ → 2NH₃
From the equation of reaction,
3 moles of H₂ is required to produce 2 moles of NH₃
3 moles H₂ = 2 moles of NH₃
X moles of H₂ = 18 moles of NH₃
X = (3 * 18) / 2
X = 27 moles of H₂
27 moles of H₂ is required to produce 18 moles of NH₃
What type of elements are ionic bonds composed of?
Answer:
A metal and a nonmetal
Explanation:
Picture NaCl, the most famous example of an ionic compound. Two ions, Na+ (sodium) and Cl- (chlorine) are joined by an ionic bond.
Sodium, the metal, gives up an electron to chlorine.
Chlorine, the nonmetal, accepts an electron from sodium.
That way both have 8 electrons in their outer shell! This is the way ionic bonds function.
How many carbon and hydrogen atoms are there?
Answer:
13 carbon and 24 hydrogen
Explanation:
There are 24 hydrogen atoms.
There are 13 carbon atoms.
ILL GIVE YOU BRAINLIST * have to get it right * !!! Although individual body systems can perform specific functions, they depend on one another and work together for the good of the entire organism.
Which of the following provides the best evidence that the digestive system and the muscular system work together to carry out their functions?
What mass of chromium would be produced from the reaction of 57.0 g of potassium with 199 g of chromium(II) bromide according to the following reaction? 2 K + CrBr2 2 KBr + Cr *
Answer:
38g of Cr
Explanation:
Step 1:
The balanced equation for the reaction:
2K + CrBr2 —> 2KBr + Cr
Step 2:
Determination of the masses of K and CrBr2 that reacted and the mass of Cr produced from the balanced equation.
This is illustrated below:
Molar mass of K = 39g/mol
Mass of K from the balanced equation = 2 x 39 = 78g
Molar Mass of CrBr2 = 52 + (80x2) = 212g
Mass of CrBr2 from the balanced equation = 1 x 212 = 212g
Molar Mass of Cr = 52g/mol
Mass of Cr from the balanced equation = 1 x 52 = 52g
From the balanced equation above,
78g of K reacted with 212g of CrBr2 to produce 52g of Cr.
Step 3:
Determination of the limiting reactant.
This is illustrated below:
From the balanced equation above,
78g of K reacted with 212g of CrBr2.
Therefore, 57g of K will react with = (57 x 212)/78 = 154.92g of CrBr2.
From the above calculation, we can see that a lesser mass (i.e 154.92g) than what was given ( i.e 199g) of CrBr2 is needed to react completely with 57g of K. Therefore, K is the limiting reactant and CrBr2 is the excess reactant.
Step 4:
Determination of the mass of Cr produced by the reaction.
In this case, the limiting reactant will be use because it will give the maximum yield of Cr as all of it is used up in the reaction process. The limiting reactant is K and the mass of Cr produced is obtained as follow:
From the balanced equation above,
78g of K reacted to produce 52g of Cr.
Therefore, 57g of K will produce = (57 x 52)/78 = 38g of Cr.
Therefore, 38g of Cr is produced from the reaction.
What mass in grams of hydrogen is produced by the reaction of 2.0 g of magnesium? (Make sure to balance the reaction first)
Mg(s) + H2O(1) --> Mg(OH)2(s) + H2 (8)
Answer:
0.164541341 g H2
Explanation:
1) Convert grams to moles by dividing by RMM of Magnesium (24.31g).
2g Mg * (1 mol Mg / 24.31 g Mg) = 0.082270671 mol of Mg
2) Use the balanced equation's ratio of 1 mol Mg: 1 mol H2.
0.082270671 mol of Mg = 0.082270671 mol of H2
3) Convert the mol of H2 back into grams by multiplying by H2's RMM (2 g).
0.082270671 mol of H2 * 2 g H2 = 0.164541341 g H2
* Answer can be rounded to your liking *
How many grams of H20 will be formed when 32.0 g H2 reacts with 16.0 g
O2? *
2H2 + O2 + 2H2O
9.00 g
16.0 g
18.0 g
32.0g
Answer:
18.0 g
Explanation:
M(H2) = 2.0 g/mol
32.0g * 1 mol/2 g= 16 mol H2
M(O2) = 32 g/mol
16.0 g * 1mol/32 g= 0.5 mol O2
2H2 + O2 ---> 2H2O
from reaction 2 mol 1 mol
given 16 mol 0.5 mol
We see that O2 is a limiting reactant.
2H2 + O2 +-------> 2H2O
from reaction 1 mol 2 mol
given 0.5 mol x mol
x =(0.5*2)/1= 1 mol H2O
M(H2O)= 18 g/mol
18 g/mol* 1 mol = 18 g H2O
