Answer:
uh yeah I think so technically
Answer:
no
Explanation:
determine the theoretical yield.
aluminum metal reacts with aqueous nickel II sulfate to produce aqueous aluminum sulfate and nickel as a precipitate. in this reaction 108 grams of aluminum were combined with 464 grams of nickel II sulfate to produce 274 grams of aluminum sulfate.
The question is incomplete, the complete question is;
In this stoichiometry problem, determine the percentage yield:
Excess aluminum metal reacts with aqueous nickel(II) sulfate to produce aqueous aluminum sulfate and nickel as a precipitate. In this reaction 108 g of aluminum were combined with 464 g of nickel(II) sulfate to produce 274 g of aluminum sulfate.
Answer:
80%
Explanation:
The correct equation for this reaction is;
2Al(s) + 3NiSO4(aq) --------> Al2(SO4)3 + 3Ni(s)
We already know that Al is in excess then NiSO4 is the limiting reactant.
Hence, Number of moles in 464 g of NiSO4 = mass/ molar mass
Molar mass of NiSO4 = 155 g/mol
Number of moles = 464g/155g/mol = 2.99 moles
Number of moles of Al2(SO4)3 = mass/molar mass
molar mass = 342 g/mol
So, Number of moles = 274g/342g/mol = 0.8 moles
Given the stoichiometric reaction equation;
3 moles of NiSO4 yields 1 mole of Al2(SO4)3
2.99 moles of NiSO4 yields 2.99 * 1/3 = 1 mole of Al2(SO4)3
percentage yield is given by; actual yield/ theoretical yield * 100/1
actual yield = 0.8 moles of Al2(SO4)3
Theoretical yield = 1 mole of Al2(SO4)3
Hence;
% yield = 0.8/1 * 100 = 80%
How would you describe the appearance of homogeneous mixture? A. Homogeneous mixtures do not have a uniform composition. B. Homogeneous mixtures have a uniform appearance. C. Homogeneous mixtures are not distributed evenly. D. Homogeneous mixtures have two phases
Answer:
i think its c somebody correct me if im wrong. but hope this help
Explanation:
an object moving with a speed of 5m/s has a kinetic energy of 100J what is the mass of the object
Answer:
k. e. = 1/2 mv^2
100 = 1/2 * m * 5^2
100 = 1/2 * m * 25
m = 100 *2/25
m = 8 kg
hope it helps you
In which highlighted section of the periodic table in the diagram provided above are the elements whose atoms have 1 valence electron located?
A) a
B) b
C) c
D) d
Answer:
B.
Explanation:
how many moles of methane are in 7.31*10^25 molecules?
121 mol CH₄
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Organic
Writing chemical compoundsWriting organic structuresPrefixesAlkanes, Alkenes, AlkynesAtomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
7.31 × 10²⁵ molecules CH₄
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[tex]\displaystyle 7.31 \cdot 10^{25} \ molecules \ CH_4(\frac{1 \ mol \ CH_4}{6.022 \cdot 10^{23} \ molecules \ CH_4} ) = 121.388 \ mol \ CH_4[/tex]
Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
121.388 mol CH₄ ≈ 121 mol CH₄
How many elements, compounds and atoms are in CH3COOH
If you find a chemical in the lab and are unsure of
its identity, what is the best way to find out what it
is?
Answer:
C. read the label on the container
Explanation:
What information is found in an SDS? Check all that apply.
A. the identification of the chemical
C. the chemical and physical properties of the substance
D. the first-aid measures to take if an accident occurs involving the chemical
Answer:
C
Explanation:
just did it
what type of heat transfer takes place when you come in contact with a snow flake on a cold day?
Answer:
Conduction
Explanation:
Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object.
Answer:
Conduction
Explanation:
Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object.
5. Describe the effects of photons of light on an electron of the hydrogen atom
Answer:
How do atoms give off light?
Atoms emit light when they are heated or excited at high energy levels. The color of light that is emitted by an atom depends on how much energy the electron releases as it moves down different energy levels. ... It shows the electron moving down energy levels.
Explanation:
The general area of the atom (outside the nucleus) where the e- are located is the — and —
I don't really understand this worksheet question.
Structural formula of 2 ethyl, 4 methyl-Heptane
Compare and contrast atoms and molecules. Cite specific examples from the readings, as well as what you may already know, to support your comparison.
Answer:
The main difference between an atom and a molecule lies in the size: while the atom is the smallest unit into which matter can be divided into any of its states, a molecule is the union of a group of atoms, that is, this composed of several atoms. Thus, for example, a water molecule is composed of two hydrogen atoms and one oxygen atom (H2O). Therefore, it can be said that atoms are the smallest unit in which the chemical elements of the world can be divided, while molecules are the particles of matter that are formed through the combination of these elements.
define the clinical thermometer
Answer:
a small medical thermometer with a short but finely calibrated range, for taking a person's temperature.
Answer:
Thermometer which are used in clinical to measure the temperature of human body is called clinical thermometer.
Which term is defined as the region in an atom where an electron is most likely to be
located?
1.
nucleus
2.
orbital
3.
quanta
4.
spectra
Answer:
"2.Orbital." I think
Explanation:
Risk*
Answer these three please! Thank you <3333
(I will give brainliest)
Answer:
Explanation:
21:B 22:B
List four greenhouse gases in the atmosphere. For each gas, describe its prevalence in the atmosphere, its natural sources, its human-induced sources, and how its concentration in the atmosphere might be changing.
Answer: Carbon Dioxide, Methane, Nitrous Oxide and Fuorinated Gases
Explanation:Carbon dioxide (CO2): Carbon dioxide enters the atmosphere through burning fossil fuels (coal, natural gas, and oil), solid waste, trees and other biological materials, and also as a result of certain chemical reactions (e.g., manufacture of cement). Carbon dioxide is removed from the atmosphere (or "sequestered") when it is absorbed by plants as part of the biological carbon cycle.
Methane (CH4): Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices and by the decay of organic waste in municipal solid waste landfills.
Nitrous oxide (N2O): Nitrous oxide is emitted during agricultural and industrial activities, combustion of fossil fuels and solid waste, as well as during treatment of wastewater.
Fluorinated gases: Hydrofluorocarbons, perfluorocarbons, sulfur hexafluoride, and nitrogen trifluoride are synthetic, powerful greenhouse gases that are emitted from a variety of industrial processes. Fluorinated gases are sometimes used as substitutes for stratospheric ozone-depleting substances (e.g., chlorofluorocarbons, hydrochlorofluorocarbons, and halons). These gases are typically emitted in smaller quantities, but because they are potent greenhouse gases, they are sometimes referred to as High Global Warming Potential gases ("High GWP gases").
1. __N2 + __H2-> __NH3
2. __Fe + __HCl-> __H2 + __FeCl3
Answer:
N2+ 3H2－> 2NH3
2Fe + 6HCl －> 3H2 + 2FeCl3
how many atoms are in 1.50 moles of He?
what kind of chemical bond is established in hydrochloric acid?
Answer and Explanation:
HCl, also known as hydrochloric acid, has a covalent bond. The hydrogen (H) atom shares an electron with the chlorine (Cl) to form the bond.
5. CaCO, - CaO+CO,
Reaction Type
Answer:
(a) Decomposition: A substance breaks down to smaller species. [e.g. CaCO3(s) → CaO(s) + CO2(g) Decomposition of limestone to calcium oxide (quicklime) and carbon dioxide on heating.]
What happens to valence electrons in ionic bonding?
Answer:
they are either donated to or taken by another atom to achieve octet arrangement
Explanation:
for example Na+ and Cl- .. they both have one extra and one less electron .
so they donate and receive one electron to/from each other to achieve the octet arrangement ..
Explain in a short sentence how you can tell a reaction is a decomposition reaction.
Answer: A decomposition reaction occurs when one reactant breaks down into two or more products.
Mark me as brainilist pls
Explain five physical and/or chemical properties that you need to consider for the substances before using them as construction materials for buildings
Answer: There are many properties of a metal which is taken into consideration when it is used for construction
Explanation:
The properties can be physical, chemical, et cetera. The physical properties that is considered are:
1. Durability: It can be defined as the property of the material to withstand the atmospheric pressure and other factors.
2. Density: The ratio of mass by volume of a material (homogeneous material) is called as density.
3. Fire resistance: The ability of the material to withstand in fire without changing its size or shape.
4. Weather resistance: The ability of the material to withstand the weather which could be variable round the year.
5.Water absorption: The ability of the material to absorb water and retain it.
which are exmaples of chemical change?
•baking cookies
• The statue of liberty's metal tarnishes from copper to green
• cold butter melts into liquid when heated
•salt is dissolved into freshwater
•Food scraps decompose into fertilizer in a compost pile
• frying changes the color and texture of an egg
•ocean water evaporates to water vapor on a hot day
•lighting a match
Answer:
cold butter melted when heated, lighting a match, baking cookies,
Explanation:
What is the percent composition of Phosphorus in Li3PO3
Answer:
you will get 17.983 g of lithium for every 100 g of lithium phosphate.
Explanation:
69.7% is the percent by mass of Lithium in Li[tex]_3[/tex]PO[tex]_3[/tex]. A percent is obtained by multiplying the result by 100.
One approach to show the concentration for an element within a compound or component in a combination is as a mass percentage. The mass percentage is computed by dividing the total weight of the combination by the mass of each component and multiplying the result by 100%. The mass percent is calculated by dividing the mass that contains the compound and solute by the mass for the element or solute.
99.795g/mol = molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex]
6.94g/mol = molar mass of Li
mass percentage of Li=(molar mass of Li/molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex])× 100
=(6.94/99.7)× 100
=69.7%
To know more about mass percentage, here:
brainly.com/question/32197511
#SPJ6
Why are electromagnetic Waves important society today?
Answer Electromagnetic waves are used to transmit long/short/FM wavelength radio waves, and TV/telephone/wireless signals or energies. They are also responsible for transmitting energy in the form of microwaves, infrared radiation (IR), visible light (VIS), ultraviolet light (UV), X-rays, and gamma rays.
Explanation:
Electromagnetic waves are important in society today because they are used to "transmit long/short/FM wavelength radio waves, and TV/telephone/wireless signals or energies. They are also responsible for transmitting energy in the form of microwaves, infrared radiation (IR), visible light (VIS), ultraviolet light (UV), X-rays, and gamma rays."
Question
WHMIS legislation states that Material Safety Data Sheets:
A)are expired if they are more than 3 years old
B) must be available for workers to review
C)are expired if they are more than 5 years old
D )both a and be
E) both b and c
Answer: B) must be available for workers to review
Explanation:
WHMIS is a Canadian program which gives information to the employers about the workers knowledge about hazardous materials that are used in the workplace. It is ensured that the worker labelled the hazardous material at the workplace, material safety data sheet should be created to supplement the label, and worker's education program for learning the safety precautions is also conducted.
The material safety data sheets are created by the employers and their is no expiry date for such data for workers instead they receive a next recommended training date for participating in the training and avail another certification after the completion of first year.
Which characteristic do euglenoids and algae share?
Both are fungus-like protists.
Both can be autotrophic.
Both have whip-like tails.
Both are decomposers.
To solve this we must be knowing each and every concept related to autotroph. Therefore, eugenides and algae, both can be autotrophic. The correct option is option B.
What is autotroph?An creature that can make its own sustenance out of inorganic materials is known as an autotroph. Contrarily, heterotrophs are species that can't make their own nutrition and must eat other organisms in order to survive.
In contrast to autotrophs, heterotrophs are unable to manufacture their own nourishment. Heterotrophs need to consume organic material in order to produce the nutrients needed for life, not inorganic. Eugenides and algae, both can be autotrophic.
Therefore, Eugenides and algae, both can be autotrophic. The correct option is option B among all the given options.
To know more about autotroph, here:
https://brainly.com/question/15458607
#SPJ6
An object has a mass of 26.94 grams and a volume of 2.568 cubic centimeters. What material is it likely to be
made of?
Substance iron gold silver copper
Density (g/cm) 7.874 19.32 10.49 8.92
a. Silver
c. Iron
b. Gold
d. Copper
Answer:
a) silver
Explanation:
Given data:
Mass of object = 26.94 g
Volume of object = 2.568 cm³
Which subject is this = ?
Solution:
Formula:
d = m/v
by putting values
d = 26.94 g/ 2.568 cm³
d = 10.49 g/cm³
Densities of objects: g/cm³
iron = 7.874
gold = 19.32
silver = 10.49
copper = 8.92
Thus, given object is silver.
