Is pre ap chemistry hard in high school?

Answers

Answer 1

If you don't practice enough it's obviously going to be hard but if you practice enough it's going to be a piece of cake so don't think if it's going to be hard or not just think it's going to be worth the try at the very end

Answer 2
Depends on how good u are at studying or taking notes if your good at that you should be fine

Related Questions

Butanal, an aldehyde, can be made from 1-bromobutane, but it requires two reactions in sequence. What are the two reagents that can be used to make butanal from 1-bromobutane if reagent A is first reacted with 1-bromobutane and then the product of that reaction, is reacted with reagent B.

Answers

Answer:

See explanation and image attached

Explanation:

My aim is to convert 1-bromobutane to butanal. The first step is to react the 1-bromobutane substrate with water. This reaction occurs by SN2 mechanism to yield 1-butanol. Hence reagent A is water.

1-butanol is now reacted with an oxidizing agent such as acidified K2Cr2O7 (reagent B) to yield butanal. Note that primary alkanols are oxidized to alkanals.

These sequence of reactions are shown in the image attached.

A nitrogen ion has a mass of 14 and a charge of +2. Which subatomic particles does it contain? (1 point)
O 2 protons, 6 neutrons, and 6 electrons
O 7 protons, 7 neutrons, and 5 electrons
O 4 protons, 4 neutrons, and 6 electrons
o 7 protons, 7 neutrons, and 9 electrons

Answers

Answer:

7 protons, 7 neutrons, and 5 electrons

Explanation:

the formula for atomic weight=no.of protons + no. of electrons this shortens the options into b or d and second part says that the ion has charge +2 which means it has lost two electrons. so no. of electrons=no.of electrons in nitrogen atom - 2=5.

Nitrogen ion with a charge of +2 has 7 protons, 7 neutrons, and 5 electrons

Explanation:

To obtain the right answer to the question, we must determine the number of proton, neutron and electron of nitrogen ion. This can be obtained as illustrated follow.

Step 1:

Data obtained from the question.

Mass number = 14

Charge = +2

Step 2:

Determination of the number of proton.

The atomic number of an element is simply the number of protons in the atom of the element.

Atomic number of nitrogen = 7

Thus, the proton number of nitrogen is 7.

NOTE: The atomic number of an element does not change be it atom or ion, it remains the same.

Therefore the proton number of nitrogen ion is 7

Step 3:

Determination of the number of neutron

Mass number = 14

Proton number = 7

Neutron number =?

Mass number = Proton + Neutron

14 = 7 + Neutron

Collect like terms

14 – 7 = Neutron

Neutron = 7

Step 4

Determination of the number of electrons.

Charge = +2

Proton number = 7

Electron number =?

Charge = Proton – Electron

+2 = 7 – Electron

Collect like terms

2 – 7 = – Electron

–5 = – Electron

Multiply through by –1

Electron = 5

SUMMARY:

Nitrogen ion with a charge of +2 has:

1. 7 protons

2. 7 neutrons

3. 5 electrons.

Learn more: https://brainly.com/question/20369115

A person uses 400.8 kcal of energy to run a race. Convert the energy used for the race to the following energy units:

(provide an answer in 4 significant figures)

Calories

calories

Food Calories

Joules

Kilojoules

Hint: 1kcal=4.184kJ

Answers

Calories, we know that fat burn is calories.

What does the third quantum number (m) describe?
A. Which energy level the electron is in
B. What type of orbital the electron is in
C. What direction the electron is spinning
D. The specific orbital within a sublevel

Answers

I think c the best answer

The third quantum number (m) describes the specific orbital within a sublevel. The correct answer is option D.

Quantum numbers are a set of four numbers that describe the properties of an electron in an atom. They specify the energy, position, and orientation of an electron in an atom.

The third quantum number (m) is also called the magnetic quantum number. It describes the orientation of the orbital in space. Each orbital within a sublevel has a different orientation in space, and the magnetic quantum number tells us which orbital we are talking about.

The value of m can range from -l to +l, where l is the second quantum number (the angular momentum quantum number). The value of l determines the number of orbitals in a sublevel, and the value of m determines the specific orbital within that sublevel.

In conclusion, the third quantum number (m) describes the specific orbital within a sublevel. It tells us how the orbital is oriented in space, and it can have values ranging from[tex]\rm -l \ to +l[/tex], where l is the second quantum number.

Option D is the correct answer.

Learn more about quantum number here:

https://brainly.com/question/32116992

#SPJ4

Determine the relative formula mass of dihydrogen monoxide using the periodic table below.

A. 18 g/mol
B. 17 g/mol
C. 16 g/mol
D. 2 g/mol

Answers

The relative atomic mass of dihydrogen monoxide is 18g/mol

Dihydrogen monoxide is a molecule containing two atoms of hydrogen and one atom of oxygen i.e. H2O. It is widely regarded as WATER

To calculate the relative atomic mass of dihydrogen monoxide (H2O), we make use of the atomic mass of each element.

According to the periodic table:

Where; H = 1g/mol and O = 16g/mol

H2O = 1(2) + 16

= 2 + 16

= 18g/mol

Learn more at: https://brainly.com/question/17275626

describe cold blooded animal.also some five example.​

Answers

Answer:

Cold blooded animals are animals which stay in water

Explanation:

Examples are;snakes,tortoises,turtles,crocodiles,alligators

The element Co exists in two oxidation states, Co(II) and Co(III), and the ions form many complexes. The rate at which one of the complexes of Co(III) was reduced by Fe(II) in water was measured. Determine the activation energy of the reaction from the following data:

T(K) K(s^-1)
293 0.054
298 0.100

Answers

We measured the Fe(II) reduction of one of the Co(III) complexes by water at a rate of about 0.545 kJ/mol (to three significant figures).

How is activation energy determined?

Calculating a Reaction's Activation Energy A reaction's rate is influenced by the temperature at which it is carried out. The molecules travel more quickly and clash more frequently as the temperature rises. Moreover, the molecules contain greater kinetic energy.

We can use the Arrhenius equation to calculate the reaction's activation energy:

k = A × exp(-Ea/RT)

When the activation energy Ea, the rate constant k, the gas constant R, and the temperature T in Kelvin are all present.

Finding the natural logarithm of the equation's two sides results in:

ln(k) = ln(A) - (Ea/RT)

This equation can be rearranged to take a linear form:

ln(k) = (-Ea/R) × (1/T) + ln(A)

y = mx + b, where (1/T) is x, (-Ea/R) is the slope, and ln(A) is the y-intercept, has the form of a linear equation.

We can get the slope of the line using the given data:

slope = (-Ea/R) = (ln(k2/k1)) / (1/T2 - 1/T1)

where the rate constants for temperatures T1 and T2, respectively, are k1 and k2.

substituting the specified values:

k1 = 0.054s⁻¹ at 293 K

k2 = 0.100s⁻¹ at 298 K

T1 = 293 K

T2 = 298 K

slope = (-Ea/R)

= (ln(0.100/0.054)) / (1/298 - 1/293)

= 65.5 kJ/mol

Therefore, the activation energy of the reaction is:

Ea = slope * R = 65.5 kJ/mol × 8.314 J/mol-K = 545 J/mol

To know more about molecules visit:-

https://brainly.com/question/15532626

#SPJ1

Write the balanced equation for the hydration of CuSO4CuSO4. Indicate the physical states using the abbreviations (ss), (ll), or (gg) for solid, liquid, or gas, respectively. Use (aqaq) to indicate the aqueous phase. Indicate appropriate charges on negative and positive ions if they are formed.

Answers

Answer:

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)

Explanation:

Hydration is the process by which anhydrous CuSO4 acquires molecules of water of crystalization to form the pentahydrate.

The water of crystalization becomes attached go the crystals of the CuSO4 to form the hydrated salt.

Beginning with solid anhydrous CuSO4 we have;

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)

Which of the following is an example of an optional deduction ? " a ) Medicare Ob ) Social Security c ) Retirement plan d ) State tax

Answers

Medicare  

United states program for people who are older than 60

Which one of these statements is/are true: I. All redox reactions with positive emfs are spontaneous. II. If a redox reaction is spontaneous, it must be fast. III. A spontaneous redox reaction will have a cathode reaction that has a more negative reduction potential than the anode. III only. I and III are true. I only. II only. All of I, II, and III are true.

Answers

Answer:

yea all the answers are true

Redox reaction is the transfer of the electron from one species to another. All of the three statements are true about the redox reaction.

What is a redox reaction?

A redox reaction is a type of chemical reaction in which the electrons are gained and lost by a species. The positive EMF of the cell results in spontaneous and will move the reaction in the forward direction.  

In a redox reaction, the cathode reaction is comparatively more negative than the reduction potential present at the anode.

Therefore, option E. All I, II, and III are true.

Learn more about redox reaction here:

https://brainly.com/question/13076860

Which method separates components of a mixture according to how quickly the particles travel through a medium?

A. distillation

B. evaporation

C. filtration

D. chromatography

Answers

Chromatography is the separation of a mixture by passing it in solution or suspension or as a vapor through a medium in which the components move at different rates.

Taking into account its definition, the correct answer is option D) Chromatography.

Chromatography is a method that allows the separation, identification and determination of chemical components in complex mixtures. By means of a chromatography it is possible to separate analytes that are very similar to each other in terms of their physico-chemical properties.

For the separation to occur, the principle of selective retention is used, which consists of the different behavior of the components of a mixture on a specific support (such as paper, a gas, a liquid) and a flowing liquid or gaseous phase. through the bracket.

In other words, there is a stationary phase immobilized on a support and a mobile phase that will drag the sample through the stationary phase. During this process, each component of the sample will move according to its own physicochemical characteristics. The general concept will be that those components that prefer the stationary phase are more retained, while those that prefer the mobile phase will move faster.

In summary, the components of the sample are distributed between two phases of different nature, as a consequence of the speed variation that is established when being dragged by a mobile, liquid or gaseous phase, through a stationary, solid or liquid phase.

Finally, the correct answer is option D) Chromatography.

Learn more about chromatography: https://brainly.com/question/15057878?referrer=searchResults

Alex drips hydrochloric acid onto a 5.9 g piece of magnesium in a single displacement reaction. How many molecules of HCl are required? 2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)

how do you do this?

Answers

2.96 × 10²³ molecules is required if Alex drips hydrochloric acid onto a 5.9 g piece of magnesium in a single displacement reaction

According to this question, hydrochloric acid (HCl) reacts with magnesium metal (Mg) to produce magnesium chloride and hydrogen has as follows:

2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)

Based on the balanced chemical equation above; 2 moles of HCl reacts with 1 mole of Mg.

Next, we convert 5.9g of Mg to moles by using the formula; mole = mass/molar mass

Where; Mg = 24g/mol

mole = 5.9/24

mole = 0.246mol of Mg

If 2 moles of HCl reacts with 1 mole of Mg. 0.246 mol of Mg will react with (0.246 × 2) = 0.492mol of HCl

To convert mole to number of molecules, we multiply number of moles by 6.02 × 10²³ (Avogadro's no.)

Hence, number of molecules of HCl required is 0.492mol × 6.02 × 10²³

= 2.96 × 10²³ molecules of HClHCl

Learn more: https://brainly.com/question/14948089

What is the relationship between temperature and kinetic energy?

Answers

Answer:

"[Temperature is a measurement of the average kinetic energy of the molecules in an object or a system. Kinetic energy is the energy that an object has because of its motion. The molecules in a substance have a range of kinetic energies because they don't all move at the same speed.]"

Answer:

Temperature is directly proportional to the average translational kinetic energy of molecules in an ideal gas

Explanation:

Which option is an isotope with 6 protons and 8 neutrons? (1 point)
O oxygen-6
o carbon-14
o oxygen-14
o carbon-8

Answers

Answer:

Carbon-14

Explanation:

It is because it have 6 protons and 8 neutrons which are added together to form an atomic mass of 14.

The mass number of an isotope is the sum of the number of protons and number of neutrons hence the correct answer is carbon-14.

Isotopes are atoms of the same element that has the same number of protons but different number of neutrons.

The atomic number is the same as the number of protons in the atom. Since there are six protons in the atom, the element must be carbon.

There are eight neutrons meaning that the mass  number is 8 + 6 = 14

Therefore, the isotope is carbon-14.

Learn more: https://brainly.com/question/13214440

Draw the structure of the organic product(s) of the Grignard reaction between methyl benzoate and excess phenylmagnesium bromide, followed by aqueous workup. You do not have to consider stereochemistry. If a compound is formed more than once, add another sketcher and draw it again. Alternatively, you may use the square brackets tool to add stoichiometries greater than one. Draw one structure per sketcher. Add additional sketchers using the drop-down menu in the bottom right corner. Separate multiple products using the sign from the drop-down menu.

Answers

Answer:

See explanation and image attached

Explanation:

The product of the Grignard reaction between methyl benzoate and excess phenylmagnesium bromide is triphenyl methanol.

The reaction proceeds by nucleophillic reaction as the carbonyl moiety is attacked. A tetrahedral intermediate is formed. Loss of the -OMe group is accompanied by the attack of the first molecule of PhMgBr.

Attack by a second PhMgBr molecule yields trimethyl phenoxide. Protonation of this specie yields the final product which is obtained by aqueous workup.

Consider a hypothetical metal that has a density of 10.6 g/cm3, an atomic weight of 176.8 g/mol, and an atomic radius of 0.130 nm. Compute the atomic packing factor if the unit cell has tetragonal symmetry, values for the a and c lattice parameters are 0.570 and 0.341, respectively.

Answers

Answer:

0.3323

Explanation:

GIven that:

Density of the metal = 10.6 g/cm^3

atomic weight = 176.8 g/mol

atmic radius = 0.130 nm

values of a and c = 0.570 nm and 0.341 nm respectively

For us to determine the atomic packing factor, we need to first determine the volume of all spheres (Vs) and the volume of unit cell (Vc).

However, the number of atoms  in the unit cell (n) can be computed as:

[tex]n = \dfrac{\rho * V_c *N_A}{A} \\ \\ n = \dfrac{(10.6) * (5.7)^2 (3.41)*(10^{-24}) *(6.022*10^{23})}{176.8}[/tex]

n = 4.0

Thus, the number of atoms in the unit cell is 4

The atomic paking factor (APF) is calculated by using the formula:

[tex]\dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *R^3 }{a^2 *c} \\ \\ \\ \dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *(1.30*10^{-8})^3 }{(5.70*10^{-8})^2 *(3.41*10^{-8})}[/tex]

= 0.3323

why Ethyl amine is more basic than aniline​?

Answers

Answer:

Because a Lone pair of electrons on nitrogen is involved in delocalization.

Hope this helps you ( ◕ᴗ◕✿)

If it doesn't i'm sorry(◞ ‸ ◟)

Explanation:

In ethylamine ethyl is electron donating group. So more electrons are available aroudn nitrogen for donation. But in aniline phenyl group is electron attracting group.

Give the change in condition to go from a gas to a solid. Group of answer choices cool or increase pressure cool or reduce pressure increase heat or reduce pressure increase heat or increase pressure none of the above

Answers

Answer:

cool or increase pressure

Explanation:

For a gas to form solid. There must be reduced heat and pressure. The deposition of gas into solid occurs through the removal of thermal energy. The air looses thermal energy and changes into solid.

The critical mass of fissionable material is the largest mass necessary to sustain a nuclear fission chain reaction. single mass value that can sustain a nuclear fission chain reaction. mass at the critical point, which can sustain a nuclear fission chain reaction. smallest mass necessary to sustain a nuclear fission chain reaction.

Answers

Answer:

smallest mass necessary to

Explanation:

The critical mass for a fissionable material is the smallest and the lowest quantity of a particular fissile material required to generate a self-sustaining fission chain reaction under specified conditions. The size's features are determined by a number of variables. Examples include;

The type of fissile material employed, its purity as well as concentration, the shape of the surrounding reaction system e.t.c.

Answer:

Fill in the blanks with the terms that complete the sentences about nuclear power plants.

Without a critical mass of fissionable material, a nuclear reaction cannot be sustained. The turbine is powered by steam.

Explanation:

The answers to both parts are marked in bold. I just answered these questions on Edge and they were both correct. Hope this helps. Please mark my answers as the brainiest. THANK YOU!!!!!!!!!!!!!!!!!!!

Hello, I am a bit stuck on this. Could someone help?

Answers

There is no picture or question. What am I supposed to answer to?

313.9 liters of a gas has a pressure of 390.89 kPa at 76.6°C. If the pressure increases to 718.3 kPa and the temperature to 154.2°C, what would be the new volume of the gas?

A.) 210
B.) 353
C.) 470
D.) 209.92

Answers

Explanation:

P1V1/T1 = P2V2/T2

=((390.89×313.9)/76.6)×((718.3×V2)/154.2)

= (122700.371/76.7) × ((718.3×V2)/154.2)

make V2 the subject of the formula...

V2 =(122700.371×154.2)/(76.6×718.3)

V2 =18920397.21/55021.78

V2 = 343.87

Which of the following pairs lists phase changes that both give off energy?
a) Freezing and condensation
b) Deposition and vaporization
c) Vaporization and melting
d) Condensation and sublimation

Answers

Answer:

a) Freezing and condensation

Explanation:

please mark me as brainliest

The answer is A
Freezing ( liquid to solid)
Condensation ( gas to liquid)

The standard redox potentials of isolated components of an electron transport chain in a cyanobacterium are found to be as follows:
Complex A: standard redox potential: -100 mV
Complex B: standard redox potential: -780 mV
Complex C: standard redox potential: +510 mV
Complex D: standard redox potential: +310 mV
Plastocyanin: standard redox potential: +360 mV
Which complex will likely have a binding site with high affinity for reduced plastocyanin?
A. Complex A.
B. Complex B.
C. Complex C.
D. Complex D.

Answers

Answer:

B. Complex B.

Explanation:

Complex B will have binding site with high affinity for reduced plastocyanin due to greater redox potential. The high number of redox potential will will transport electron chain in cyanobacteria.

Redox potential is the measure of the electron gain or loss to the electrode. For reduced plastocyanin complex B will have the highest affinity.

What is electron affinity?

Electron affinity is the energy released when the atom gets attached to the atom or other molecule. The high number of redox potential increases the electron transport in the cell.

The greater the redox potential more will be its tendency to show electron affinity. To bond with reduced species, the oxidized species must have greater redox potential.

Therefore, option B. complex b will have the highest affinity.

Learn more about reduction potential here:

https://brainly.com/question/14437673

Problem 7 (Diffusion due to viscosity) If the viscosity of a solution is quadrupled, the rms-average distance of a collection of diffusing molecules from their starting point would be _________ over the same amount of time.

Answers

Answer:

1/2 the distance

Explanation:

If the viscosity of a solution is quadrupled then the distance of collection of diffusing molecules would be half over the same amount of time. The viscosity of the molecules is dependent on density of the liquid. It is independent to the volume of the liquid.

How many moles of HNO3 are needed to prepare 5.7 liters of a 1.64 M solution of HNO3

Answers

We are given:

Volume of Solution: 5.7 Liters

Concentration: 1.64 Molar

Number of moles required:

We know that the formula for concentration (in molar) is:

M = N / V              

where M is the concentration, N is the number of moles, and V is the volume of solution (in L)

plugging the given values in the equation:

1.64 = N / 5.7

N = 1.64 * 5.7            

N = 9.35 moles

A 0.204 g sample of a CO3 2- antacid is dissolved with 25.0ml of 0.0981 M HCL. The hydrochloric acid that is not neutralized by the antacid is titrated to a bromophenol blue endpoint with 5.83 ml of 0.104 M NaOH. Assuming the active ingredient in the antsacid sample is CaCO3, calculate the mass of CaCO3 in the sample.

Answers

Answer:

0.0922 g

Explanation:

Number of moles of acid present = 25/1000 × 0.0981

= 0.00245 moles

Number of moles of base = 5.83/1000 × 0.104

= 0.000606 moles

Since the reaction of HCl and NaOH is 1:1

Number of moles of HCl that reacted with antacid = 0.00245 moles - 0.000606 moles

= 0.001844 moles

From the reaction;

CaCO3 + 2HCl ----> CaCl2 + H2O + CO2

1 mole of CaCO3 reacts with 2 moles of HCl

x moles of CaCO3 reacts with 0.001844 moles ofHCl

x = 1 × 0.001844/2

= 0.000922 moles

Mass of CaCO3 = 0.000922 moles × 100 g/mol

= 0.0922 g

A 25.00 gram sample of an unknown metal initially at 99.0 degrees Celcius is added to 50.00 grams of water initially at 10.55 degrees Celcius. The final temperature of the system is 20.15 degrees Celcius. Calculate the specific heat of the metal. (The specific heat of water is 4.184 J/g*C).

Answers

Answer:

1.0188 J/g*C

Explanation:

Using the formula; Q = m × c × ∆T

Q(water) = -Q(metal)

m × c × ∆T (water) = -{m × c × ∆T (metal)}

According to this question,

mass of metal = 25g

initial temp of metal = 99°C

mass of water = 50g

initial temp of water = 10.55°C

final temperature of the system = 20.15°C

c of water = 4.184 J/g*C

50 × 4.184 × (20.15 - 10.55) = 25 × c × (20.15 - 99)

209.2 × 9.6 = 25c × -78.85

2008.32 = -1971.25c

c = 2008.32 ÷ 1971.25

c of metal = 1.0188 J/g*C

The surface of silver metal, Ag(s), became tarnished when it was exposed to oxygen, producing Ag2O. In Ag2O, the oxidation state of silver is 1. According to this information, silver metal was _____. Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices reduced

Answers

Answer: The silver metal was OXIDIZED.

Explanation:

OXIDATION is defined as loss of electrons and increase in oxidation number of an atom.

Oxidation number is the charge on an ion in an ionic compound or the charge that an atom in a covalent compound would have it it were ionic. There are basic rules governing oxidation number, they include:

--> the oxidation number of elements in their free states is ZERO. Example O2, Cl2,Na, Al, Ag.

-->The oxidation number for an ion is the same as the size and sign of the charge on the ion. For example the oxidation number of Zn2+ is +2.

--> the sum of all the oxidation numbers of the elements in a compound is zero.

--> oxidation numbers are always written with either a positive or a negative sign.

On the other hand, reduction is the opposite of oxidation. As oxidation is taking place, reduction is also taking place. Reduction involves:

--> Gain of electron and

--> decrease in oxidation number

From the question, the silver metal had ZERO as it's oxidation number because it's in free state. After being exposed to oxygen to form silver oxide, the oxidation number became +1.

Since there is an increase in the oxidation number, the silver metal was OXIDIZED

How to distinguish between ethanol and 2 -methyl-2-propanol

Answers

Answer:

There are many reagents.

1. Use acidified potassium permanganate solution

2. Use acidified potassium dichromate solution

3. Fehling solution.

4. Silver/ oxygen at 500°C

5. Copper/ oxygen at 300°C

6. Lucas reagent ( anhydrous zinc and conc. hydrochloric acid)

Explanation:

Observations:

[with acidified potassium permanganate solution]

» Ethanol : The purple solution turns colourless.

» 2-methyl-2-propanol : no observable change.

[with acidified potassium dichromate solution]

» Ethanol : orange solution turns green

» 2-methyl-2-propanol : no observable change.

[Fehling solution]

» Ethanol : a white precipitate is formed

» 2-methyl-2-propanol : no observable change

How are all compounds similar?
A. They are all made up of ions that are held together by attractions.
B. They are all made up of the same few elements.
C. They are all made up of atoms of two or more different elements.
D. They are all made up of atoms that share electrons.

Answers

Answer:

the answer is C

Explanation:

a molecule can be made up of two atoms of the same kind, as when two oxygen atoms bind together to make an oxygen molecule

I'd really appreciate a brainleast

Other Questions
A negative point charge q1 = 25 nC is located on the y axis at y = 0 and a positive point charge q2 = 10 nC is located at y =14 cm. Find the y coordinate of the points where the net electric potential due to these two charges is zero. A semicolon can replace what part of speech?A. ArticlesB. VerbsC. ConjunctionsD. Prepositions Block A hangs by a cord from spring balance D and is submerged in a liquid C contained in beaker B. The mass of the beaker is 1.20 kg; the mass of the liquid is 1.85 kg. Balance D reads 3.10 kg and balance E reads 7.50 kg. The volume of block A is 4.15 103 m3.a) What is the density of the liquid?b) What will the balance D read if block A is pulled up out of the liquid?c) What will the balance E read if block A is pulled up out of the liquid? Rank these solutions from the most alkaline (1) to the least alkaline (5). Pleaseeee help I need to finish my test :/When an organism undergoes mitosis and then divides in half to produce two new and identical organisms , this is calledA: regenerationB: binary fissionC: buddingD: sporulation A pitcher of juice holds 6 cups. How many 2/3 -cup servings of juice are in the pitcher?serving-please help ill give brainliest pharmacy and pharmacist are very important in medical science.Please try to give long answer. I will mark you as brainlialist and give you 5 star. :) Your executive team is working on the new vision statement for the company. You notice some people keep confusing the vision statement with a mission statement. You explain that the vision is the _____ and the mission is the _____ for the company g My boss ___ John for lunch on Sunday to discuss the new product. (meet) *A. meetsB. is meetingC. metD. was meeting Which is not a health risk for binge-eating disorder? Cu 1: Chu M tip gip vi nhng i dng no? A.Thi Bnh Dng, i Ty Dng, Bc Bng Dng. B.Thi Bnh Dng, Bc Bng Dng, n Dng C.i Ty Dng, n Dng, Bc Bng Dng. D.Thi Bnh Dng, i Ty Dng, n Dng. A nut company is determining how to package their new type of party mix. The marketing department is experimenting with different-sized cans for the party mix packaging. The designers use the equation r=Vhr=Vh to determine the radius of the can for a certain height hh and volume VV. The company decides they want the can to have a volume of 1280cm31280cm3. Find the radius of the can if the height is 16cm16cm. Keep your answers in simplified radical form. What renal and hormonal factors will cause an increased release of aldosterone from adrenal cortex? Type the correct answer in each box. Use numerals instead of words.The domain of this function is {-12, -6, 3, 15}.y = -2/3x + 7Complete the table based on the given domain. Which of these statements best accounts for Chinese immigrants to the United states in the laye 1800s During its 2021 fiscal year, Jacobsen Corporation reported before-tax income of $624,000. This amount does not include the following two items, both of which are considered to be material in amount: Unusual gain$204,000 Loss on discontinued operations(304,000)The company's income tax rate is 25%. Jacobsen Corporation prepares its financial statement applying International Financial Reporting Standards (IFRS). In its 2021 income statement, Jacobsen would report income from continuing operations of: What does it mean bedside baptist???? If an elevator repairer observes that cables begin to fray after 15 years, what process might he or she use to create a maintenance schedule for their replacement? fallacious reasoning reductive reasoning inductive reasoning deductive reasoning What is covered under original fee-for-service Medicare describe what happens at every step of our network model, when a node on one network establishes a TCP connection with a node on another network. You can assume that the two networks are both connected to the same router.