Answer:
Physical Change
Explanation:
Sublimation is a physical change. When a substance sublimes, it changes from a solid to a gas without going through the liquid phase.
. Which law of motion relates the action of a stretched rubber band
Answer:
newtons 3rd law of motion
Explanation:
If the solubility of salicylic acid is 77.8 g/L of water at 100oC and 1.4 g/L of water at 10oC, a) calculate the minimum amount (in mL) of boiling water necessary to dissolve 2.0 g of impure salicylic acid for recrystallization. b) If the solution is cooled to room temperature and then to 10oC with an ice/water bath, what is the maximum amount of solid salicylic acid isolated after vacuum filtration
Answer:
a. 25.7mL are necessaries.
b. 1.964g of salicylic acid can be isolated.
Explanation:
a. As the solubility of salicylicic acid in boiling water is 77.8g/L, to dissolve 2.0g of salicylic acid are necessaries:
2.0g * (1L / 77.8g) = 0.0257L =
25.7mL are necessariesb. Then, at 10°C the solution just can dissolve 1.4g/L, that is:
0.0257L * (1.4g/L) = 0.036g of salicylic acid are dissolved.
And will precipitate:
2.0g - 0.036g =
1.964g of salicylic acid can be isolated6. (5 pts) From among the isomeric compounds with molecular formula C4H9Cl, identify the one having a 1H NMR spectrum that: a) contains only a single peak b) has several peaks, including a doublet at d 3.4 c) has several peaks, including a triplet at d 3.5 d) Has several peaks, including two distinct signals, each with an integration of 3H, one of them a triplet at d 1.0 and the other a doublet at d 1.5.
Answer:
Explanation:
Chemically identical protons in 1HNMR spectra are protons that are found in the same chemical system and produce one signal in the spectra. Non-equivalent protons are protons that reside in various chemical environments and display different signals.
(a) The provided alkyl halide has four carbons, nine hydrogens, and one chlorine atom, according to the molecular formula. To achieve a single NMR peak, all protons (9 hydrogens) must be in the same chemical environment. That is, the carbon skeleton should be made up of three methyl groups, each bound to a single carbon atom.
As a consequence, the tert-butyl chloride structure can be present. That it has three methyl groups that are all the same and are all bound to the same carbon atom. As a result. A single peak is generated by proton NMR.
(b) The other isomeric variant of C4H9Cl, which has several peaks and a doublet at d3.4, could have a proton at a nearby carbon. And then does it produce a doublet. To create the doublet, two methyl groups should be substituted for the carbon. The value of 3.4 indicates that the protons can be exposed to chlorine. As a result, the compound's composition is iso-butyl chloride.
(c) The compound C4H9Cl can have two protons on adjacent carbons since it has multiple peaks and a triplet at d3,5. And then does it generate a triplet. The meaning of 3.5 indicates that the protons should be exposed to chlorine. As a result, the compound's composition is n-butyl chloride.
(d) The compound C4H9Cl has many peaks, including a methyl group triplet at d1.0 and a methyl group doublet after. It's in the same family as the -CH party. Due to the chlorine atom, this doublet occurs at downfield at 1.5. As a result, the compound's composition is sec-butyl chloride.
Choose all the answers that apply.
The atmosphere:
is made mostly of nitrogen
can be used to transmit radio signals
traps heat from the sun
protects the earth from harmful radiation
is important in the water cycle
Answer:1 2 and 4
Explanation:
These properties best describe which body (Gases Surface, 75%H, 25% He, Zones)
(18 Points)
Planet
or
Sun
NO LINKS
Answer:sun
Explanation:The Sun is the star at the center of the Solar System. It is a nearly perfect sphere of hot plasma, heated to incandescence by ... When hydrogen fusion in its core has diminished to the point at which the Sun is no longer in . Sunlight on the surface of Earth is attenuated by Earth's atmosphere, so that less power arrives
a Technical
How to write
report
Consider a solution which is 0.10M in NH3 and 0.20M in NH4Cl. Choose ALL of the following that are false. If a small amount of NaOH is added, the pH becomes slightly more basic. If HCl is added, the H ions react with the NH3. If a small amount of HCl is added, the pH becomes slightly more basic. If NaOH is added, the OH- ions react with the NH3. If NH4NO3 is added, the pH becomes more basic.
Answer:
The incorrect or the false options are -
(B) - If NH4NO3 is added, the pH becomes more basic.
(D) - If a small amount of HCl is added, the pH becomes slightly more basic.
(E) - If NaOH is added, the OH- ions react with the [tex]NH_3[/tex].
Explanation:
The given solution the buffer basic .
When a small amount of either is added, the hydrogen ion reacts with the ammonium ion, raising the pH slightly.When a small amount of HCl is added, the hydronium ion reacts with the ammonia, raising the pH slightly.Therefore , the options A ( If a small amount of NaOH is added, the pH becomes slightly more basic.) and C ( If HCl is added, the H+ ions react with the NH3.) All other B , D , E are false .
T/F___ At the eutectic composition, an alloy can solidify at a constant temperature.___ For effective dispersion strengthening, the dispersed phase should be needle-like, as opposed to round___ Intermetallic compounds are usually hard and brittle.___ For effective dispersion strengthening, the dispersed phase should be continuous.___ Stoichiometric intermetallic compounds exist overa range of compositions.___ Faster solidification results in smaller interlamellar spacing
Answer:
TRUEFALSETRUEFALSEFALSETRUEExplanation:
At the eutectic composition, an alloy can solidify at a constant temperature : TRUE . this is because at eutectic composition the type of reaction that takes place there is invariant reaction in its thermal equilibrium For effective dispersion strengthening, the dispersed phase should be needle-like, as opposed to round : FALSE. because the rounded shape will not cause a crack. Intermetallic compounds are usually hard and brittle : TRUE. because Intermetallic compounds prevents dislocation movements and this makes them brittle and hardFor the effective dispersion and strengthening, the dispersed phase should be continuous : FALSE. this is because the dispersed precipitate must be small and not continuous Stoichiometric intermetallic compounds exist over a range of compositions : FALSEFaster solidification results in smaller interlamellar spacing : TRUEIn a sample of neon, carbon, and oxygen gas, the total pressure is 9 atm.
The partial pressure of neon is 2 atm and the partial pressure of oxygen is 2
atm. What is the partial pressure of carbon?
9 atm
3 atm
5 atm
4 atm
Answer:
5 atm
Explanation:
add boh partial pressures and subtract from total pressure
Helllllp me please
Part D ends with neon Express your answer as an integer. 20
Answer:
attach file please
what is the mass concentration in ppm of NaCl of 0.01% mass/mass
A-10
B-100
C-10^3
D-10^4
E-10^5
Answer:
B-100
Explanation:
ppm is an unit of concentration that could be defined as the mass in mg of solute (In this case, NaCl) per kg of solution.
Now, a solution of NaCl that is 0.01% by mass, contains 0.01g of NaCl in 100g of solution.
To solve this question, we must convert the mass of NaCl to mg and the mass of solution to kg:
Mass NaCl:
0.01g * (1000mg / 1g) = 10mg
Mass Solution:
100g * (1kg / 1000g) = 0.10kg
The ppm are:
10mg / 0.10kg =
100ppm
Right answer is:
B-100what type of reaction occur in cyclohexene
Cyclohexene is a cyclic, six-membered hydrocarbon that contains one double bond. The types of reactions that can occur in cyclohexene would be those that are typical with alkenes generally.
The pi-bonded electrons in the double bond are nucleophilic. So, electrophilic addition reactions could occur with cyclohexene. For example,
cyclohexene + HBr → bromocyclohexane
cyclohexene + H2O/H+ → cyclohexanol
cyclohexene + Br2 → trans-1,2-dibromocyclohexane (racemic)
The latter is a common test for alkenes where one adds bromine to a sample to see if there is decolorization, which would indicate the presence of nucleophilic pi bonds. Bromine, which is dark reddish-brown, will become clear as it reacts with an alkene to form a colorless haloalkane.
Cyclohexene can also be converted to the fully saturated cyclohexane by hydrogenation: cyclohexene + H2/Pd → cyclohexane.
someone please answer this question i will mark you brainliest!!
which sentences in the passage are true?
Answer:
First and last sentence .♀️
Explanation:
An important thing to keep in mind about the Reading Comprehension section of the GRE as we use PowerPrep online to study is that it is just that—reading comprehension. In other words, as difficult as it may seem, and it can be pretty tricky, the test makers will always give us all the information we need in the passage to answer the question.
What is the source of the forces that cause this plate movement
Convection currents in the mantle, I got it right on a p e x
Can tell the answer pls
Explanation: where the article????
?CH4 → ?C6H6 + ?H2
?C2H6 + ?O2 → ?CO2 + ?H2O
I need to know the number that goes in front of the equations
Answer:
You basically want to balance these equations.
(6)CH4 → (1)C6H6 + (9)H2
(2)C2H6 + (7)O2 → (4)CO2 + (6)H2O
NOTE: DO NOT PUT BRACKETS IN YOUR ANSWER, I HAVE PUT HERE FOR THE ANSWERS INSTEAD OF QUESTION MARKS.
Question List
Question 4 of 8
Total Points: 0 out of 80
Calculate the volume that will be occupied by
240 mL of hydrogen, measured at 360 mm Hg, when
the pressure is changed to 1080 mm Hg.
Answer:
80 mL
Explanation:
Step 1: Given data
Initial pressure of hydrogen (P₁): 360 mmHgInitial volume of hydrogen (V₁): 240 mLFinal pressure of hydrogen (P₂): 1080 mmHgFinal volume of hydrogen (V₂): ?Step 2: Calculate the final volume of hydrogen
If we assume ideal behavior and constant temperature, we can calculate the final volume occupied by hydrogen using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁/P₂
V₂ = 360 mmHg × 240 mL/1080 mmHg = 80 mL
125.0 mL of 2.00 M NaCl solution is diluted to a concentration of 1.50 M. How many mL of water was added to the original volume? (Hint: must find V2 first) 1
166.7 ml
30.9 mL
41.7 ml
292 mL
(no links and please show work)
Answer:
Option A
Explanation:
As we know
C1V1 = C2V2
C1 = concentration of solution before dilution
V1 = Volume of solution before dilution
C2 = concentration of solution after dilution
V2 = Volume of solution after dilution
Substituting the given values in above equation, we get -
125 mL * 2.00 M = X mL * 1.50 M
X mL = 125 mL * 2.00 M / 1.50 M
X = 167 mL
Hence, option A is correct
Compare the number of moles calculated in parts a) 0.03 and b). 0.064. Which of the three possible reactions discussed is consistent with these results?
Answer:don’t click link ur gonna get ur info taken
Explanation:
Interpret the following equation for a chemical reaction using the coefficients given:
H2(g) + Cl2(g)-------- 2HCl(g)
On the particulate level:
______ of H2(g) reacts with _______ of Cl2(g) to form two molecules of HCl(g).
On the molar level:
______of H2(g) reacts with _______of Cl2(g) to form two moles of HCl(g).
Answer: 1 molecule of [tex]H_2[/tex] reacts with 1 molecule of [tex]Cl_2[/tex] to give 2 molecules of HCl.
1 mole of [tex]H_2[/tex] reacts with 1 mole of [tex]Cl_2[/tex] to give 2 moles of HCl.
Explanation:
The given balanced reaction is:
[tex]H_2(g)+Cl_2(g)\rightarrow 2HCl(g)[/tex]
On the particulate level :
1 molecule of [tex]H_2[/tex] reacts with 1 molecule of [tex]Cl_2[/tex] to give 2 molecules of HCl.
On molar level:
1 mole of [tex]H_2[/tex] reacts with 1 mole of [tex]Cl_2[/tex] to give 2 moles of HCl.
what is the molecular geometry for CH2Br2?
HCH bond angle is ~110 degrees.
Which energy source produces less negative
environmental impacts
A)Renewable Energy Sources
B)Fossil Fuels
Help
Answer:
A)Renewable Energy Sources
Explanation:
How many moles of Cs are contained in 3 moles of Cs3PO4?
Answer:
[tex]\boxed {\boxed {\sf 9 \ moles \ Cs}}[/tex]
Explanation:
We are given the compound: Cs₃PO₄
According to the formula, 1 mole of cesium phosphate contains 3 moles of cesium, 1 mole of phosphate, and 4 moles of oxygen.
Therefore, there are 3 moles of cesium for 1 mole of cesium phosphate.
[tex]\frac {3 \ mol \ Cs}{1 \ mol \ Cs_3PO_4}[/tex]
We want to calculate the moles of cesium in 3 moles of cesium phosphate, so we multiply the ratio by 3.
[tex]3 \ mol \ Cs_3PO_4 *\frac {3 \ mol \ Cs}{1 \ mol \ Cs_3PO_4}[/tex]
[tex]3 *\frac {3 \ mol \ Cs}{1 }= 9 \ mol \ Cs[/tex]
3 moles of cesium phosphate contains 9 moles of cesium.
What's the bond between two atoms of hydrogen?
Answer:There is a iin dipole attraction between two hydrogen atom
Explanation:
The same atoms have the ion dipole attraction between them the same atoms repel each other
A 1.om sample of dry air at
at 25°c at 786mmHg contains 0.925g Nitrogen Plus other gases including oxygen, argon and carbon dioxide. what is the partial pressure of Na with the air sample.
Answer:
Is the question not supposed to be what is the partial pressure of Nitrogen not Sodium
A buffered solution _______. Select the correct answer below: fails to keep hydronium and hydroxide ion concentrations nearly constant when strong acids or bases are added. maintains a constant or nearly constant pH when small amounts of strong acids or bases are added. acts to keep the hydroxide ion concentration nearly constant. acts to keep the hydronium ion concentration nearly constant.
The correct option for the given question about Buffer Solution is Option B) which is maintains a constant or nearly constant pH when small amounts of strong acids or bases are added.
What is a Buffer Solution?When a little quantity of acid or base is diluted or added, the buffer solution undergoes very slight variations in its hydrogen ion concentration (pH). pH may be maintained in buffer solutions, which are mixtures of a weak acid and its conjugate base or a weak base and its conjugate acid.Acidic and alkaline buffers are the two main groups into which buffer solutions are commonly categorized.A weak acid and its salt are combined with a strong base to create an acidic buffer, which has an acidic pH.A weak base, its salt, and a strong acid are combined to create an alkaline buffer, which has a basic pH.
Thus we conclude that when weak acids or bases are supplied in small amounts, the pH remains steady or almost constant.
Learn more about Buffer Solution here:
https://brainly.com/question/26416276
#SPJ2
8. 53.4 mL of a 1.50 M solution of NaCl is on hand, but you need some 0.800 M
solution. How many mL of 0.800 M can you make?
9. A stock solution of 1.00 M NaCl is available. How many milliliters are needed
to make 100.0 mL of 0.750 M
10.2.00 L of 0.800 M NaNO, must be prepared from a solution known to be 1.50
M in concentration. How many mL are required?
PLS answer ASAP!! WILL MARK AS BRAINLYIST!
How many mL of 0.715 M HCl is required to neutralize 1.25 grams of sodium carbonate? (producing carbonic acid)
I really couldn't find the answer since molarity and volume for sodium carbonate are not given.
I will mark the correct answer with steps as best answer.
Answer:
34 mL
Explanation:
We'll begin by calculating the number of mole in 1.25 g of sodium carbonate, Na₂CO₃. This can be obtained as follow:
Mass of Na₂CO₃ = 1.25 g
Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)
= 46 + 12 + 48
= 106 g/mol
Mole of Na₂CO₃ =?
Mole = mass /molar mass
Mole of Na₂CO₃ = 1.25 / 106
Mole of Na₂CO₃ = 0.012 mole
Next, we shall determine the number of mole HCl needed to react with 0.012 mole of Na₂CO₃.
The equation for the reaction is given below:
Na₂CO₃ + 2HCl —> H₂CO₃ + 2NaCl
From the balanced equation above,
1 mole of Na₂CO₃ reacted with 2 moles of HCl.
Therefore, 0.012 mole of Na₂CO₃ will react with = 0.012 × 2 = 0.024 mole of HCl.
Next, we shall determine the volume of HCl required for the reaction. This is illustrated:
Mole of HCl = 0.024 mole
Molarity of HCl = 0.715 M
Volume of HCl =?
Molarity = mole /Volume
0.715 = 0.024 / volume of HCl
Cross multiply
0.715 × volume of HCl = 0.024
Divide both side by 0.715
Volume of HCl = 0.024 / 0.715
Volume of HCl = 0.034 L
Finally, we shall convert 0.034 L to mL
This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.034 L = 0.034 L × 1000 mL / 1 L
0.034 L = 34 mL
Therefore, 34 mL of HCl is needed for the reaction.
The amount of HCl required for counterbalancing 1.25 g of Na2CO3(Sodium Carbonate) would be:
- [tex]34 ml[/tex]
Given that,
Mass of Na2CO3 [tex]= 1.25 g[/tex]
To find the Moles of Na2CO3, we will find the molar mass of Na2CO3,
Molar Mass of or Na2CO3 [tex]= 106 g/mol[/tex]
So,
Moles of Na2CO3 [tex]= mass /molar mass[/tex]
[tex]= 1.25/106[/tex]
[tex]= 0.012 mol[/tex]
To determine the quantity of HCl required to display the reaction with 0.012 mol of Na2CO3
[tex]Na_{2} CO_{2} + 2HCl[/tex] → [tex]H_{2}CO_{3} + 2NaCl[/tex]
While balancing the equation, we know that [tex]0.012[/tex] × [tex]2 = 0.024 mole of HCl[/tex] is necessary to process the reaction.
Now,
As we know,
HCl moles [tex]= 0.024[/tex]
Molarity of HCl [tex]= 0.715 M[/tex]
∵ Quantity of HCl required = Moles/Molarity
[tex]= 0.024 / 0.715[/tex]
[tex]= 0.034 l[/tex] [tex]or 34ml[/tex]
Thus, 34 ml is the correct answer.
Learn more about 'Molarity' here:
brainly.com/question/12127540
different between intermolecular and intra molecular dehydration
Answer: Intermolecular bonds are the forces between the molecules. Intramolecular are the forces within two atoms in a molecule.
Explanation:
