is this A.less then
b.equal too
c.more then

The parking lot has a width of around [tex]0.937[/tex] meters.

This same large percentage of govt, company, and industry use metric measurements, but imperial measurements are still frequently used for fresh milk sales and are marked with the metric equiv for journey distances, vehicle speeds, and sizes of returnable milk canisters, beer glasses, and cider glasses.

100 centimeters make up one meter. Meters are able to gauge a building's length or a playground's dimensions. 1000 meters make up one kilometer.

[tex]3760 cm = 37.6 m[/tex]

Solve for the width,

[tex]area = (1/2) * (base1 + base2) * height[/tex]

where,

base1 [tex]= 73.4 m[/tex]

base2 [tex]= 37.6 m[/tex]

area [tex]= 2,930.4[/tex] square meters

Let's solve for the height first,

[tex]height = 2 * area / (base1 + base2)[/tex]

[tex]height = 2 * 2,930.4 / (73.4 + 37.6)[/tex]

[tex]height = 2 * 2,930.4 / 111[/tex]

[tex]height = 56.16 m[/tex]

We nowadays can apply the algorithm to determine the width.

[tex]width = (area * 2) / (base1 + base2) * height[/tex]

[tex]width = (2 * 2,930.4) / (73.4 + 37.6) * 56.16[/tex]

[tex]width = 5856.8 / 111 * 56.16[/tex]

[tex]width = 5856.8 / 6239.76[/tex]

[tex]width = 0.937[/tex]

Therefore, the width of the parking lot is approximately [tex]0.937[/tex] meters.

To know more about meters visit:

https://brainly.com/question/22552981

#SPJ1

Answer:

We can simplify the expression as follows:

5^(2000) + 5^(1999)

5^(1999) - 5^(1997)

= 5^(1999) * (1 + 1/5)

5^(1997) * (1 - 1/25)

= (5/4) * (25/24) * 5^(1999)

= (125/96) * 5^(1999)

Therefore, the value of the expression is (125/96) * 5^(1999).

Step-by-step explanation:

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is called the time saved.

An experiment is a controlled study in which a scientist manipulates a variable in order to determine its effects. An experiment must have a testable hypothesis, be replicable, and produce empirical evidence.

Discussing the time difference in an experiment. In an experiment, it takes one hour to memorize all of the words on a list, and two years later, they are relearned in 45 minutes.

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is referred to as the time saved.

Time saved is the difference between the total time it takes to finish a process with a particular method and the total time it would take to complete the same process without that method.

Learn more about the Time difference here:

brainly.com/question/30132266

#SPJ11

The rate of change of the distance for limousine is less than the rate of change of the convertible.

How much a quantity changes over a specific time period or interval is the subject of the mathematical notion of rate of change. Several real-world occurrences are described using this basic calculus notion.

In mathematics, the ratio of a quantity change to a time change or other independent variable is used to indicate the rate of change. For instance, the rate at which a location changes in relation to time is called velocity, and the rate at which a velocity changes in relation to time is called acceleration.

The equation of the distance travelled by the convertible is given as:

y = 35x

The equation of the limousine can be calculated using the coordinates of the graph (1, 30) and (2, 60).

The slope is given as:

slope = (change in y) / (change in x) = (60 - 30) / (2 - 1) = 30

Using the point slope form:

y - 30 = 30(x - 1)

y = 30x

So the equation of the limousine is y = 30x.

Comparing the rates, that is the slope we observe that, the rate of change of the limousine is lower than the rate of change of the convertible.

Hence, the rate of change of the limousine is less than the rate of change of the convertible.

Learn more about rate of change here:

https://brainly.com/question/29181502

#SPJ1

By using differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5. It will be 32,572.03 in³. Which is option (d).

The possible error in measuring the radius of the sphere is 0.5 in

The formula for the volume of a sphere is given by V(r) = 4/3πr³

The volume of the sphere when r=72 in is given by V(72) = 4/3π(72)³

When r= 72 + 0.5 in= 72.5 in, the volume of the sphere can be calculated using the formula:

V(72.5) = 4/3π(72.5)³

The difference between these two volumes, V(72) and V(72.5), gives us the maximum error while measuring the volume of a sphere. It can be calculated as follows:

V(72.5) - V(72) = 4/3π(72.5)³ - 4/3π(72)³= 4/3π [ (72.5)³ - (72)³ ]= 4/3π [ (72 + 0.5)³ - 72³ ]= (4/3)π [ 3(72²)(0.5) + 3(72)(0.5²) + 0.5³ ]≈ (4/3)π [ 777.5 ]= 3.28 × 10⁴ in³

Therefore, the maximum error while measuring the volume of a sphere with a radius of 72 in, where the possible error in measuring the radius is 0.5 in, is approximately 3.28 × 10⁴ in³ or 32,572.03 in³. Therefore coorect option is (D).

To know more about the maximum error: https://brainly.com/question/13370015

#SPJ11

The probability that student A or B can solve a problem chosen at random is 0.95.

Probability is calculated by dividing the number of favourable outcomes by the number of possible outcomes.

Random: An event is referred to as random when it is not possible to predict it with certainty. The probability that either student A or B will be able to solve a problem chosen at random can be calculated as follows:

P(A or B) = P(A) + P(B) - P(A and B) where: P(A) = probability of A solving a problem = 0.75, P(B) = probability of B solving a problem = 0.7, P(A and B) = probability of both A and B solving a problem. Since A and B are independent, the probability of both solving the problem is:

P(A and B) = P(A) x P(B) = 0.75 x 0.7 = 0.525

Now, using the above formula: P(A or B) = P(A) + P(B) - P(A and B) = 0.75 + 0.7 - 0.525 = 0.925

Therefore, the probability that student A or B can solve a problem chosen at random is 0.95 (or 95%).

To learn more about "Probability": brainly.com/question/31120123

#SPJ11

Answer:

P = [tex]2y^{2}[/tex] + 4xy +4

Q = [tex]-3y^{2}[/tex] + 7 -3xy

R = -3xy +8

Step-by-step explanation:

A bin can hold 28 pounds. each toy car weighs 7 ounces., so the bin can hold 64 toy cars.

To determine the number of toy cars the bin can hold, we must first convert the weight limit of the bin and the weight of the toy cars to a uniform unit of measure.

We'll then divide the weight limit of the bin by the weight of one toy car. After that, we'll multiply the resulting value by the number of ounces in one pound (16).

Here's how to solve the problem:

1 pound = 16 ounces

Therefore, a bin that can hold 28 pounds can hold:28 × 16 = 448 Ounces

The weight of one toy car is 7 ounces.

Divide the weight limit of the bin (448 ounces) by the weight of one toy car (7 ounces):

448 ÷ 7 = 64

Therefore, the bin can hold 64 toy cars.

Learn more about weight limit at

https://brainly.com/question/14375094

#SPJ11

a) P-value = P(z<1.47) = 0.9292.

b) P-value = P(z>2.70) = 0.0036.

c) P-value = 2 × P(z>2.70) = 0.0072.

d) P-value = P(z>2.5) = 0.0062.

Z-test is a statistical test for the null hypothesis, which refers to the population mean, where the population standard deviation is known. P-value represents the probability value for any hypothesis, where a small p-value indicates that the null hypothesis is less accurate.

P-value, for the given values of z-test is calculated as follows: a) For ha: p < .6, z=1.47The p-value for this hypothesis test is calculated as follows: P-value = P(z<1.47) = 0.9292. Therefore, the P-value is 0.9292. b) For ha: p > .6, z=2.70The p-value for this hypothesis test is calculated as follows.

P-value = P(z>2.70) = 0.0036. Therefore, the P-value is 0.0036.c) For ha: p ≠ .6, z=2.70The p-value for this hypothesis test is calculated as follows: P-value = 2 × P(z>2.70) = 0.0072.

Therefore, the P-value is 0.0072.d) For ha: p > .6, z=2.5The p-value for this hypothesis test is calculated as follows: P-value = P(z>2.5) = 0.0062. Therefore, the P-value is 0.0062.

Learn more about Z Test

brainly.com/question/15683598

#SPJ11

(a) The probability that exactly two cars finish the race is 0.0512.

(b) The probability that at most two cars finish the race is 0.05792.

(c) The probability that at least three cars finish the race is 0.94208.

(a) To determine the probability that exactly two cars finish the race, we have to use binomial distribution. In this case, we have n = 5 trials, and p = 0.8 is the probability that a car finishes the race (1 - 0.2). Using the binomial distribution formula:

P(X = k) = (nCk)(p^k)(1 - p)^(n - k)

Where X is the number of cars that finish the race, we get:

P(X = 2) = (5C2)(0.8²)(0.2)³= (10)(0.64)(0.008)= 0.0512

Therefore, the probability that exactly two cars finish the race is 0.0512.

(b) To determine the probability that at most two cars finish the race, we have to calculate the probabilities of 0, 1, and 2 cars finishing the race and add them up.

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)= (5C0)(0.8⁰)(0.2)⁵ + (5C1)(0.8¹)(0.2)⁴ + (5C2)(0.8²)(0.2)³= 0.00032 + 0.0064 + 0.0512= 0.05792

Therefore, the probability that at most two cars finish the race is 0.05792.

(c) To determine the probability that at least three cars finish the race, we can calculate the probability of 0, 1, and 2 cars finishing the race and subtract it from 1, which gives us the probability of at least three cars finishing the race.

P(X ≥ 3) = 1 - [P(X = 0) + P(X = 1) + P(X = 2)]= 1 - (0.00032 + 0.0064 + 0.0512)= 0.94208

Therefore, the probability that at least three cars finish the race is 0.94208.

Learn more about binomial distribution here: https://brainly.com/question/24756209

#SPJ11

Answer:

If the GM between √2 and 2√2 is a find the value of a.​

Step-by-step explanation:

To find the geometric mean between two numbers, we simply take the square root of their product.

In this case, we want to find the geometric mean between √2 and 2√2.

Their product is:

√2 * 2√2 = 2√4 = 2*2 = 4

So, the geometric mean between √2 and 2√2 is the square root of 4, which is:

√4 = 2

Therefore, the value of a is 2.

The correct answer is option (C).

Sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent are the six functions (cot).

The equation t = Q - P, where Q and P are the specified locations, can be used to determine the components of the vector t. Therefore:

t = (–18, 2) – (–13, 11) = (–18 + 13, 2 – 11) = (–5, –9) (–5, –9)

The vector's magnitude is given by:

|t| = √(–5)^2 + (–9)^2 = √106 ≈ 10.296

The formula = tan1 (y/x), where x and y are the vector's components, can be used to determine the direction of the vector t. The direction must be expressed in terms of sine and cosine functions because we are required to represent the vector in trigonometric form.

θ = tan⁻¹ (–9/–5) ≈ 60.945°

In trigonometric form, the vector t is thus represented as follows:

t = [t|cos|i] + [t|sin|j]

We get the following by altering the values of |t| and:

t = 10.296 cos I + 10.296 sin j of angle 60.945

As a result, the following is the proper trigonometric representation of the vector t:

t = 10.296 cos I + 10.296 sin j of angle 60.945

Thus, alternative is the right response (C).

To know more about Trignometric visit:

https://brainly.com/question/29076920

#SPJ1

Answer:

[tex] |x - 300| \leqslant 10[/tex]

a. S = {(1, -1), (2, 1)}Let's begin by calculating the determinant of the matrix composed of the vectors of S, and checking if it is equal to 0. Because the two vectors are not colinear, they should span R2.|1 -1||2 1| determinant is not 0, therefore S spans R2. No geometric description is required for this example.

b. S = {(1, 1)} The set S contains one vector. A set containing only one vector cannot span a plane because it only spans a line. Therefore, S does not span R2. Geometric description: S spans a line that passes through the origin (0, 0) and the point (1, 1).c. S = {(0, 2), (1, 4)} Let's again begin by calculating the determinant of the matrix composed of the vectors of S, and checking if it is equal to 0.|0 2||1 4| determinant is 0, thus S does not span R2. In this scenario, S only spans the line that contains both vectors, which is the line with the equation y = 2x.

Geometric description: S spans a line that passes through the origin (0, 0) and the point (1, 2).

Learn more about geometric description:

https://brainly.com/question/28159445

#SPJ11

By answering the presented question, we may conclude that So, the Pythagorean theorem length of MN is expressed in terms of a and b.

Its Pythagorean theorem is just a fundamental mathematical principle that explains the connection between the sides of a triangle that is right. It asserts that the sum of the squares of both the widths of the other two sides is a square of both the width of the hypotenuse (the side facing the perfect angle) the side opposite the right angle). The mathematical mathematics is as follows: c2 = a2 + b2 At which "c" indicates the length of the right triangle and "a" and "b" reflect the extents of the additional two sides, started referring to as the legs.

Because M is the midpoint of OE and N is the midpoint of AB, we can draw a line segment connecting M and N that is parallel to OB and AE and perpendicular to AB.

the Pythagorean theorem

[tex]OE² = OX² + XE²OE²[/tex]

[tex](a + b/2)² + (2a - b/√3)²OE² = 7a²/4 + 3ab/2 + b²/4AN²[/tex]

[tex]AE² + EN²AN² = (2a√3)² + (b/2)²AN²[/tex]

[tex]12a² + b²/4MN² = AN² + AM²MN² \\\\ 12a² + b²/4 + (7a²/4 + 3ab/2 + b²/4)MN²\\\\19a²/2 + 3ab/2 + b²/2MN = √(19a²/2 + 3ab/2 + b²/2)[/tex]

So, the length of MN is expressed in terms of a and b.

To know more about Pythagorean theorem visit:

brainly.com/question/14930619

#SPJ1

The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.

We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.

for such more questions on  parabolic trajectory

https://brainly.com/question/13244761

#SPJ11

Solve the equation [tex]7/11=18/x+1[/tex] we find the solution is [tex]x = 27.2857[/tex]

Your example is an equation since an equation is any statement with an equals sign. Equations are frequently utilized for mathematical equations since mathematicians like equal signs. A set of instructions for achieving a certain result is called an equation.

A number, a constant, or a mix of numbers, variables, and operation symbols make up an expression. Two expressions joined by such an assignment operator form an equation.

we can cross-multiply,

[tex]7(x+1) = 11(18)[/tex]

Expanding the left side,

[tex]7x + 7 = 198[/tex]

Subtracting [tex]7[/tex] from both sides,

[tex]7x = 191[/tex]

Dividing both sides by [tex]7[/tex],

[tex]x = 191/7[/tex]

Therefore, the solution to the proportion is

[tex]x = 27.2857[/tex]

To know more about equation visit:

https://brainly.com/question/10413253

#SPJ1

The Trapezoidal rule and Simpson's rule are two methods used to approximate the value of a definite integral. The Trapezoidal rule approximates the integral by dividing the region between the lower and upper limits of the integral into n trapezoids, each with a width h. The approximate value of the integral is then calculated as the sum of the areas of the trapezoids. The Simpson's rule is similar, except the region is divided into n/2 trapezoids and then the integral is approximated using the weighted sum of the area of the trapezoids.

For the given integral 4 x x2 1 0 dx, with n = 200, the Trapezoidal rule and Simpson's rule approximate the integral to be 7.4528 and 7.4485 respectively, rounded to four decimal places. The exact value of the integral is 7.4527. The difference between the exact and approximate values is very small, thus indicating that both the Trapezoidal rule and Simpson's rule are accurate approximations.

for such more questions on approximate value

https://brainly.com/question/201331

#SPJ11

The value of the double integral using the easier order, ydA bounded by y = x − 6; x = y² is 125/12.

The double integral, indicated by ', is mostly used to calculate the surface area of a two-dimensional figure. By using double integration, we may quickly determine the area of a rectangular region. If we understand simple integration, we can easily tackle double integration difficulties. Hence, first and foremost, we will go over some fundamental integration guidelines.

Given, the double integral ∫∫yA and the region y = x-6 and x = y²

y = x-6

x = y²

y² = y +6

y² - y - 6 = 0

y² - 3y +2y - 6 = 0

(y-3) (y+2) = 0

y = 3 and y = -2

[tex]\int\int\limits_\triangle {y} \, dA\\ \\[/tex]

= [tex]\int\limits^3_2 {y(y+6-y^2)} \, dx \\\\\int\limits^3_2 {(y^2+6y-y^3)} \, dx \\\\(\frac{y^3}{3} + 3y^2-\frac{y^4}{4} )_-_2^3\\\\\frac{63}{4} -\frac{16}{3} \\\\\frac{125}{12}[/tex]

The value for the double integral is 125/12.

Integration is an important aspect of calculus, and there are many different forms of integrations, such as basic integration, double integration, and triple integration. We often utilise integral calculus to determine the area and volume on a very big scale that simple formulae or calculations cannot.

Learn more about Double Integral:

https://brainly.com/question/19053586

#SPJ4

The average number of hours of sleep for working college students is between 6.28 and 6.72 hours of sleep each night

According to the given data,

Sample size n = 101

Sample mean x = 6.5

Standard deviation s = 2.14

Level of confidence C = 96%

Using a 96% confidence level, the value of t* for 100 degrees of freedom is 2.081, as given in the question.

Now, the formula for the confidence interval is:x ± (t* × s/√n)Here, x = 6.5, s = 2.14, n = 101, and t* = 2.081

Substituting the values in the above formula, we get:

Lower limit = x - (t* × s/√n) = 6.5 - (2.081 × 2.14/√101) = 6.28

Upper limit = x + (t* × s/√n) = 6.5 + (2.081 × 2.14/√101) = 6.72

Therefore, the 96% confidence interval for the average number of hours of sleep for working college students is between 6.28 and 6.72 hours of sleep each night.

You can learn more about the average numbers at: brainly.com/question/16956746

#SPJ11

Anna should use 10 mL of the 72% salt solution and 20 mL of the 54% salt solution to make 30 mL of a 60% salt solution

Let's assume that Anna will use x mL of the 72% salt solution, and therefore she will use (30 - x) mL of the 54% salt solution (since the total volume is 30 mL).

To find out how much of each solution Anna should use, we can set up an equation based on the amount of salt in each solution.

The amount of salt in x mL of 72% salt solution is

= 0.72x

The amount of salt in (30 - x) mL of 54% salt solution is

= 0.54(30 - x)

To make a 60% salt solution, the total amount of salt in the final solution should be

0.6(30) = 18

So we can set up an equation

0.72x + 0.54(30 - x) = 1

Simplifying the equation

0.72x + 16.2 - 0.54x = 18

0.18x = 1.8

x = 10 ml

Learn more about equation here

brainly.com/question/17156168

#SPJ4

Answer:

The 2nd equation is false.

Step-by-step explanation:

You don't even have to solve. DE is not 58, it's 40.

The 2nd equation is false.

Answer:

142 sq cm

Step-by-step explanation:

A= 2(lh + wh + lw)

2(7*3+5*3+7*5)

2(21+15+35)

2(71)

A= 142 sq cm

Answer:

[tex]{ \rm{s = 12( v_{0} + v_{1} )t}} \\ \\{ \boxed { \rm{t = \frac{s}{12(v_{0} + v_{1})} \: \: }}}[/tex]

The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.

Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).

This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.

To know more about function click here :

https://brainly.com/question/12976257

#SPJ11

There are no fallacies of relevance committed by the given argument.

The following arguments commits fallacy: argumentum ad baculum. Argumentum ad baculum is a Latin phrase which means argument from a stick or appeal to force. It is a type of logical fallacy in which someone tries to persuade another person by using threats of force or coercion rather than using evidence or reasoning.

The above statement is an example of the argumentum ad baculum fallacy as it tries to use fear to convince people to join their protective organization. They are using the threat of potential losses to convince people to join. It is a manipulative strategy that attempts to scare people into joining by threatening the safety of their business.No fallacy is committed. There are no fallacies of relevance committed by the given argument.

Learn more about Fallacies

brainly.com/question/14669739

#SPJ11

Answer:

To use an area model to determine the quotient of 556 and 16, we can divide a rectangle of area 556 into 16 equal parts. Each part will have an area of 556/16.

We can start by dividing 556 into 16 groups of 10 (160), and then into 16 groups of 3 (48). That leaves us with a remainder of 4.

So we have:

556 = 16 x 34 + 48 + 4

This shows that 556 can be written as 16 times some whole number (34) plus a remainder of 48 + 4/16.

Simplifying the remainder, we have:

48 + 4/16 = 48 + 1/4 = 48.25

Therefore, the quotient of 556 and 16 is:

556/16 = 34 1/4

The quotient of 556 and 16 using an area model can be determined by producing a rectangle with the total area of 556 and one side of 16. The length of the other side will be the quotient. In this case, the quotient is 34 3/4.

When asked to determine the quotient of 556 and 16 using the area model, one way to think of this is making a rectangle. The total area is 556 and one side is 16. The length of the other side will be the quotient.

Start by first estimating how many times 16 could fit into 556. Let's take 30 as an estimate, because 30*16 = 480, which is relatively close to 556. Draw a rectangle with the width of 16 and the length of 30.

Find the difference between the rectangle's area and 556. So, 556 - 480 = 76. Now, 76 is our remaining area to fill. 16 goes into 76 four more times, adding up to 64.

There is still a leftover area, which is 76-64 = 12. This is smaller than our width of 16. So, your final answer is 34 12/16 or 34 3/4 in simplest form.

https://brainly.com/question/18472914

#SPJ2

Answer:

12

Step-by-step explanation:

i think its right

Answer:

- 1 and 7

Step-by-step explanation:

to find h(0) substitute x = 0 into h(x)

h(0) = 4(0) - 1 = 0 - 1 = - 1

to find h2) substitute x = 2 into h(x)

h(2) = 4(2) - 1 = 8 - 1 = 7