It would take approximately 100,000 years to receive light from a civilization on the opposite side of the galaxy. The correct answer is, therefore (a) "100,000 years".
This is because the distance between the Earth and the opposite side of the galaxy is approximately 100,000 light-years. Light travels at a speed of approximately 300,000,000 meters per second, so it would take approximately 100,000 years for light to travel from the opposite side of the galaxy to the Earth.
A light-year is a unit of distance that is equal to the distance that light travels in one year. Light travels at a very high speed, approximately 300,000,000 meters per second, so it is able to cover a large distance in a relatively short amount of time.
Learn more about Speed of Light here:
https://brainly.com/question/104425
#SPJ4
a vertical spring scale can measure weights up to 210 n . the scale extends by an amount of 13.5 cm from its equilibrium position at 0 n to the 210 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.15 hz . part a ignoring the mass of the spring, what is the mass m of the fish?
sheesh sheesh
Explanation:
when you looked at solar activity on the heliophysics event registry website, on which date did you find activity on the sun?
You did look at solar activity on the heliophysics event registry website, and we found activity on the sun on the specified day.
What three sorts of solar occurrences are there?Any natural occurrence in the upper atmosphere of the sun is referred to as a solar phenomenon. Solar flares, prominences and filaments, and coronal mass ejections are three different categories of solar phenomena.
How can I follow the cycle of solar activity the best?The simplest way we can investigate how solar activity changes over time is to survey sunspots, which is also how we track the solar cycle. Sunspots are associated with the Sun's natural 11-year cycle, during which the planet's surface changes from calm to turbulent.
To know more about solar activity visit:-
https://brainly.com/question/3013261
#SPJ4
Two forces of 5N and 12N act at a point The two force first act in opposite directions
a, Make a sketch showing the direction of the forces.
b, calculate the resultant of the forces and mark its direction on your sketch.
The resultant of the force that acts in opposite directions is 7 N.
What is the resultant force?We know that the resultant force is the force that has the same effect in magnitude and direction as two or more forces that is acting together. We have to note that the force that is actinmg on an object is a vector quantity. The implication of this is that the magnitude and the direction of the forces that are acting on the body is very important.
By the use of the law of vectors we can be able to write in the case of the question that we have here, we can see that the forces are acting in the opposite directions. The implication of this is that we would have to subtract the forces so as obtain the resultant force.
We have to note that when we have opposite forces, one is said to be positive and the other negative and the resultant force can be found by subtraction. As such the resultant force can be obtained from;
Let the +B force be 12 N
Let the -B force be 5N
12 N - 5 N = 7 N
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
1. A car moving 11 m/s accelerates at 1.5 m/s². How fast is it moving after it accelerates for 50
seconds?
Type a response (show work please)
We may be aware that, for example, a car leaving a stop sign would move farther in a given amount of time the faster it accelerates.
what an acceleration is?acceleration is the rate of change in both speed of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. So because direction is always shifting, motion on a circle accelerates even while the speed is constant.
What prompts accelerating?An object's velocity is altered by a net force, and acceleration increases with net force. To accelerate at the same rate as less massive objects, more massive objects need greater net forces.
To know more about acceleration visit:
https://brainly.com/question/2303856
#SPJ1
suppose that experiment 1 and experiment 2 are conducted at the same time; one student drops the ball from rest at the same instant that a second student horizontally rolls an identical off the table. after both balls have traveled half their vertical distance to the floor, what is the acceleration of the center of mass of the two-ball system relative to earth?
The two-ball system's center of mass will accelerate at a rate of "g" with respect to the earth.
What is a system's center of mass?It represents the system's average location as weighted by each component's mass. The center of mass for straightforward stiff objects with homogeneous density is found at the centroid.
How can the center of mass of a symmetrical object be determined?Finding the center of mass for symmetrical objects is significantly easier because symmetrical points on one side of the item will negate those same points on the other. Consider a uniform cylinder that is upright as an illustration.
To learn more about center of mass visit:
brainly.com/question/28996108
#SPJ4
Does the addition od 5N forces always give a 10 N force?
determine the energy levels and the corresponding eigenstates for a par- ticle of mass m, subject to a potential energy v (x) g
An energy eigenstate can always be written as (x,t) = (x)e-iEt/1. Probability density is equal to |(x,t)|2 (x,t) (x)e-iEt/1 * (x,t) ψ*(x)e+iEt/1 = ψ (x) The wave function *(x) = |(x)|2 exhibits time-dependent phase.
V's role in the Schrodinger equation?For the system of a particle or particles interacting with a set of constraints, V(x) is a potential energy function. These restrictions can be compared to fields that exert a force on the desired particle or particles.
What is the energy eigenvalue?The term "energy eigenvalues," which comes from the German word eigen, which means "characteristic" or "unique," refers to such particular discontinuous (step-like) energies. We refer to these energies as discrete energy eigenvalues or as quantized energies.
Learn more about energy here:
https://brainly.com/question/17858145
#SPJ4
The energy levels and the corresponding eigenstates of a particle of mass m subject to a potential energy v(x) g can be determined by solving the time-independent Schrodinger equation.
What is potential energy?
Potential energy is energy that is stored and can be released in the future. It is the energy of position or condition, as opposed to kinetic energy which is energy in motion. Potential energy can be stored in many forms such as gravitational, chemical, elastic, nuclear, and electromagnetic. Gravitational potential energy is the energy stored in an object due to its position in a gravitational field, while chemical potential energy is the energy stored in the bonds of chemical compounds. Elastic potential energy is energy stored in objects that can be stretched or compressed, such as a spring, while nuclear potential energy is the energy stored in the nucleus of an atom. Electromagnetic potential energy is the energy stored in the electric and magnetic fields of an object.
The energy levels and the corresponding eigenstates of a particle of mass m subject to a potential energy v(x) g can be determined by solving the time-independent Schrodinger equation:
Hψ = Eψ
Where H is the Hamiltonian operator, ψ is the wavefunction, and E is the energy. For a particle of mass m subject to a potential energy v(x) g, the Hamiltonian can be written as:
H = -(h2/2m)*d2/dx2 + v(x) g
The solution of the Schrodinger equation for this Hamiltonian yields the energy levels E and the corresponding wavefunctions ψ. The energy levels are determined by solving the equation:
E - v(x) g = 0
This equation can be solved for the different energy levels E, and the corresponding wavefunctions can then be determined by solving the Schrodinger equation. The wavefunctions represent the probability distribution of the particle, and are determined by the boundary conditions imposed by the potential energy.
In summary, the energy levels and the corresponding eigenstates of a particle of mass m subject to a potential energy v(x) g can be determined by solving the time-independent Schrodinger equation. The energy levels are found by solving the equation E - v(x) g = 0, and the corresponding wavefunctions are found by solving the Schrodinger equation.
To learn more about potential energy
https://brainly.com/question/15896499
#SPJ4
a positive charge is moving to the right and experiences an upward magnetic force. in which direction must the magnetic field have a component?
The rightward motion of a positive charge is accompanied by an upward magnetic pull. There must be a component of the magnetic field that enters the page.
How does magnetic force work?The total force operating on an electric charge can be expressed as the sum of the electric force and the magnetic force acting on the object if a point charge q is placed in the presence of both a magnetic field of magnitude B (r) and an electric field of magnitude E (r).
How does a magnetic field respond to an electric current?Electric Field A magnetic field forms around a wire when an electric current flows through it. The magnetic field also creates a ring of concentric circles around the wire.
To learn more about magnetic field visit:
brainly.com/question/23096032
#SPJ4
Classify the type of reaction below.
C2H6 + O2
--> CO2 + H2O
a. Synthesis
b. Decomposition
c. Combustion
d. Single Replacement
e. Double Replacement
Answer: Synthesis
Explanation: You are combining multiple Elements
3. A car travels 64.4 km in 0.5 hr. Calculate the car's average speed in km/hr.
Answer:
128.8Km/h
Explanation:
S=d/t
=64.4/0.5
=128.8
Kendell's mom buys him a new bowling ball that has a mass of 4 kg. He rolls the ball with an average speed of
30 m/s. What is the average kinetic energy of Kendell's ball when rolling?
Answer:
1800J
Explanation:
E = ½mv²
E = ½(4)(30)²
E = 2 x 900
E = 1800J
A ball rolled toward Manny while he was playing soccer. If Manny’s foot kicks the ball as shown in the picture, which will most likely happen to the ball?
answer choices
- The ball will stop rolling.
- The ball will roll toward the east.
- The ball will continue rolling west.
- The ball will go straight up in the air.
Answer:
no photo
Explanation:
sorry i cannot see a photo can you send it to me?
Find the y-component of this
vector:
42.2°
101 m
Remember, angles are measured from
the +x axis.
Y-component (m)
The y-component of the given vector is 67.84 m.
What is a vector quantity?The quantities that exhibit both magnitude and direction can be defined as vector quantities. For example, a boy is riding a cycle with a velocity of 30 km/hr in a southeast direction. Then to define the velocity, we require two things which are the magnitude of the velocity and the direction. Therefore, it expresses a vector quantity.
The components of the vector can be represented as:
x = r cosθ
y = r sinθ
Given the value of r, = 101 m
The angle, θ = 42.2°
The y-component of this vector can be calculated as:
y = 101 ×sin 42.2°
y = 67.84 m
Learn more about vectors, here:
https://brainly.com/question/24327456
#SPJ1
Hydroelectric systems generate electricity using the energy of falling water. A pumped storage hydroelectric system can also be used as a way of storing energy for future use. Explain how
It is obvious that In the pumped storage method, a pumped water is stored in a reservoir using unique pumps. Electric pumps consume electric power, however, and so the logic of the pumped storage methods seems poor but this is not so. Water is usually pumped during off-peak hours of power consumption. An essential reason for the pumped storage method is water-level control to make sure that the power station operates at all means or indefinitely. This reason reflects the economics of power generation as well.
what is hydroelectric system?
hydroelectric is a renewable energy also known as hydroelectric power,( hydropower), electricity that is produced from generators driven by turbines that convert the potential energy of falling or flowing water into mechanical energy.
learn more about hydroelectric system here;
brainly.com/question/2321474
#SPJ1
how would you characterize atmospheric conditions if the adiabatic lapse rate is steeper than the environmental lapse rate
The atmosphere is deemed to be completely unstable if the environmental lapse rate is higher than the dry adiabatic lapse rate.
How do lapse rate circumstances relate to the stability of the atmosphere?
Higher than dry-adiabatic lapse rates are unstable and promote vertical motion. In the absence of saturation, an atmospheric layer is neutrally stable if its lapse rate coincides with the dry-adiabatic rate. Any existing vertical motion is neither slowed down nor accelerated in this case.
What separates adiabatic lapse rate from environmental lapse rate?
The adiabatic lapse rate is the rate at which an air parcel's temperature is varying adiabatically.
Raise your knowledge of Atmospheric Stability
Visit:
https://brainly.com/question/450968
#SPJ4
if we have a system that uses 5 volts with a frequency of 1ghz and the power used is 3 watts, what is the power draw when we increase the frequency to 3ghz?
Processor-A uses 20 W of power components and 80 W cpu dynamic power 3 GHz.
Static power: What does that mean?When there is no design activity occurring, static power—also known as "leakage"—is used up. It closely relates to the transistor's idle current, which is based on the transistor's characteristics.
Power is it static or is it dynamic?While leakage, or the current that passes through a transistor while there is no activity, makes up static power, switching or short-circuit power are components of dynamic power. Any of the following things may influence each power component's value: Activity. Frequency.
To know more about static power visit:
https://brainly.com/question/26609519
#SPJ4
a 40cm diameter wheel accelerates uniformly from 240 rpm to 360 rpm in 6.5 seconds. how far will a point on the edge of the wheel have traveled in this time
Answer:
S = V1 t + 1/2 a t^2 distance traveled for linear acceleration
θ = ω1 t + 1/2 α t^2 equivalent angle for rotational acceleration
ω1 = 240 / min * 2 π * 240 / (60 s/min) = 8 π / s
ω2 = 360 rpm = 12 π / s
α = 4 π/ 6.5 s^2 = .62 π / s^2 angular acceleration
θ = 8 π / s 6.5 s + .62 π / 2 * 6.5^2
θ = 52 π + 13 π = 65 π = 65 * π / (2 π / rev) = 32.5 rev
1 rev = 2 * π * R = 2 * π * .4 m = 2.51 m / rev
S = 32.5 rev * 2.5 m/rev = 81 m
100 POINTS AND BRAINLIEST IF YOU CAN ANSWER
On a position vs. time graph for an object, a horizontal line segment indicates that the object is
A. at its starting location.
B. not moving and is at rest.
C. located at ground level.
D. moving at a constant rate.
Answer:
The answer is D. moving at a constant rate.
Explanation:
I've had this question before.
In the position-time graph, the horizontal line segment indicates that the object is not moving and is at rest. Therefore, option (B) is correct.
What is the Position Time Graph?The position vs time graph on which the instantaneous position of a particle is plotted on the y-axis and the time is plotted on the x-axis is called the Position-Time graph.
In the position vs time graph always take an independent variable on the x-axis and dependent variables must be plotted on the y-axis. Through mathematical function, the dependent variable will be dependent on the independent variable.
In the case of the Kinematic equation of uniform acceleration, the position can be defined as a dependent variable and time will be the fundamental independent variable.
The case of the horizontal line in the position vs. time graph indicates that the position of the object is not changing with time so it is at rest.
Learn more about position vs. time graph, here:
https://brainly.com/question/11290682
#SPJ2
after i stops my lexus engine, the warning sign appears when open door, but off when close the door, why?
Your door-ajar light may turn on for a variety of reasons depending on the type of vehicle you drive: a dome light short in terms of electricity. The anti-theft system experienced an electrical short. a door switch that was stuck to the "open" setting.
The effects that an electrical short has.Appliance damage, electrical shock, or even a fire may result from a short circuit. And if you don't take any steps to prevent short circuits, the likelihood that these events will occur will only rise.
An electrical short, also known as a short circuit, is a low-resistance connection between two conductors, which are components allowing electricity to flow through them. A short happens when a current takes an unintended detour instead of taking the intended path.
To know more about electrical short visit:
https://brainly.com/question/29109199
#SPJ4
A physics student walks 6 meters east, 4 meters north, then 9 meters
west. What is the student's magnitude of displacement from starting
position?
Answer:
5 m
Explanation:
Displacement is the straight-line distance from the starting point to the end point. Student ends up 4m north and 3m west from where he started. Use pythagorean theorem to solve for displacement (d).
d² = 3² + 4² = 25
d = [tex]\sqrt{25}[/tex] = 5 m
Or, if you remember from geometry, a right triangle with legs of 3 and 4 has a hypotenuse of 5 (3-4-5 right triangle)
a point at an antinode of the standing wave on the wire travels from its maximum upward displacement to its maximum downward displacement in 8.40 msms . what is the wire'??s mass?
The relation between the time-period of the transverse wave for the third harmonic and the time between the maximum displacement and minimum displacement is [tex]=16.3 \mathrm{~g}[/tex]
[tex]$$T_3=2 t$$Substitute$8.40 \mathrm{~ms}$[/tex]
for t in the above expression.
[tex]$$T_3=2(8.4 \mathrm{~ms})\left(\frac{10^{-3} \mathrm{~s}}{1 \mathrm{~ms}}\right)$$[/tex]
The wave velocity can be given by the following expression [tex]=0.0168 \mathrm{~s}[/tex]
[tex]v=\frac{\lambda_3}{T_3}[/tex]
Here,
[tex]$$\lambda_3$$[/tex]
is the frequency of third harmonics and
[tex]$$T_3$$[/tex]
is the time-period of third harmonics.
Substitute [tex]$0.1296 \mathrm{~m}$[/tex] for
[tex]$$\lambda_3$$[/tex]
and
[tex]$0.0168 \mathrm{~s}$ for$T_3$[/tex]
[tex]\begin{aligned}& v=\frac{0.1296 \mathrm{~m}}{0.0168 \mathrm{~m}} \\& =7.714 \mathrm{~m} / \mathrm{s}\end{aligned}[/tex]
The expression of the wave velocity is given by the following expression.
[tex]v=\sqrt{\frac{T}{m / L}}[/tex]
Rearrange the above expression for
[tex]$$m$$[/tex]
[tex]\text { Substitute } 5.00 \mathrm{~N} \text { for } T, 0.1944 \mathrm{~m} \text { for } L \text {, and } 7.714 \mathrm{~m} / \mathrm{s} \text { for } v \text { in the above expression. }[/tex]
[tex]\begin{gathered}m=\frac{(5.00 \mathrm{~N})(0.1944 \mathrm{~m})}{(7.714 \mathrm{~m} / \mathrm{s})^2} \\=(0.0163345 \mathrm{~kg})\left(\frac{1000 \mathrm{~g}}{1 \mathrm{~kg}}\right) \\=16.3 \mathrm{~g}\end{gathered}[/tex]
The anti-nodes in the standing waves are at a distance half a wavelength. The time-period is twice the time from maximum displacement to minimum displacement of the anti-node.
To learn more about displacement visit
https://brainly.com/question/11934397
#SPJ4
a 97.5 kg bungee jumper jumps off a bridge and undergoes simple harmonic motion. if the period of oscillation is 11.2 s, what is the spring constant of the bungee cord?
According to the given statement 4.88 N/m is the spring constant of the bungee cord.
What is the spring constant k?The spring stiffness is quantified by the spring constant, or k. For various springs and materials, it varies. The stiffer the spring is and the harder it is to stretch, the bigger the spring constant. K stands for the proportionality constant, commonly referred to as the "spring constant." The k variable in Hooke's law (F = -kx) represents stiffness and strength in simple words.
Briefing:Mass m= 97.5 kg
period T= 11.2s
The period expression is provided as
T=2π√m/k
Substitute
11.2= 2*3.142*√97.5/k
square both sides
11.2^2= 2*3.142*97.5/k
125.44= 612.69/k
k=612.69/125.44
k= 4.88 N/m
To know more about Spring Constant visit:
https://brainly.com/question/14159361
#SPJ4
a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. How much work was done by the dog ?
The work done by the dog is 0.81J.
What is work done?Work done is a measure of energy expended in moving an object; most commonly calculated by multiplying the force by the distance.
It is said that no work is done if the object does not move.
The work done on an object is the amount of energy transferred to an object through work.
According to this question, a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. The force applied to break the bone must be calculated first as follows:
Force = mass × acceleration
Force = 0.75kg × 9.8m/s²
Force = 7.35N
Work done = 7.35N × 0.11m = 0.81J
Therefore, 0.81J is the work done by the dog.
Learn more about work done at: https://brainly.com/question/2750803
#SPJ1
disregarding friction, how far will the cart move in 3.2 s, starting from rest? answer in units of m.
If the cart moves in 3.2 seconds from rest, then the distance traveled by cart is 2 meters.
Which definition of distance suits you best?How do you define distance? Regardless of direction, distance measures an object's overall movement. Distance is defined as the amount of ground covered by an object, regardless of its starting or stopping position.
Horizontal force acting on the cart, F = 11 N
Mass of the cart, m = 35 kg
To find,
Distance covered by the cart in 3.5 seconds if it starts from rest.
Solution,
Let x is the distance moved by the cart. It can be calculated using the second equation of motion as :
s = 1.925 meters
What is the definition of a distance?In terms of "how much land an object is covered" while traveling, distance—a scalar quantity—describes this. Displacement is a vector number that expresses the overall change in the object's location, and it is related to the phrase "how far from place the thing is."
To know more about distance visit:
https://brainly.com/question/15172156
#SPJ4
when the distance between two masses doubles, the strength of the gravitational force between them ―
When the distance between two masses doubles, the strength of the gravitational force between them is decreased by a factor of 4.
Gravitational Force:
Any two mass-containing objects are attracted to one another by gravitational force. Because it consistently attempts to pull masses together rather than pushing them apart, the gravitational force is known as attractive. In reality, everything in the cosmos is tugging on everything else, including you! Newton's Universal Law of Gravitation is what it is known. Admittedly, you aren't pushing on those other objects all that much because you don't have a very large mass. Additionally, items that are very far apart from one another do not clearly tug on one another. However, we can calculate the force because it exists.
It is given by,
[tex]F=\frac{GMm}{r^{2} }[/tex]
We can clearly evaluate from the above formula that
[tex]F[/tex] ∝ [tex]\frac{1}{r^{2} }[/tex]
So,
When the distance between two masses doubles, the strength of the gravitational force between them is decreased by a factor of 4.
Learn more about Gravitational force here
https://brainly.com/question/24783651
#SPJ4
Which two waves
combine to form a surface wave?
•
two transverse waves
•
two longitudinal waves
O a transverse wave
a and a longitudinal wave
a transverse wave and a light wave
A surface wave is a combination of a transverse wave and a longitudinal wave
What is a surface wave?A surface wave is a mechanical wave that propagates along the interface between differing media. A surface wave is made up of transverse and longitudinal wave
A transverse wave is a wave in which particles of the medium move up and down perpendicular to the direction of the wave. A longitudinal wave is a wave in which particles of the medium move parallel to the direction of the wave.
Surface waves usually have larger amplitudes and longer wavelengths than body waves, and they travel more slowly than body waves do.
learn more about surface wave from
https://brainly.com/question/16948312
#SPJ1
.An object has a mass of 10 kg and an acceleration of 20 m/s2. What is the force on the object?
The force acting on the object is 200 Newton.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
Given that mass of the object: m = 10 kg.
acceleration of the object = 20 m/s^2.
Hence, according to Newton's 2nd law of motion:
Force = mass × acceleration
= 10 × 20 Newton
= 200 Newton.
Hence, the force on the object is 200 Newton.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
3. You drive on NH-4 from New Delhi to Agra, half the time at 55 km/h and the other half at 90 km/h. On the way back you travel half the distance at 55 km/h and the other half at 90 km/h. What is your average speed (a) from New Delhi to Agra, (b) from Agra to New Delhi, (c) for the entire trip? (d) What is your average velocity for the entire trip?
Answer:
below
Explanation:
d = distance from ND to A
Average speed = total d / total time
a) total distance = d
= 1/2 t * 55 + 1/2 t * 90 total time = t
average speed = d / t = (1/2 t *55 + 1/2 t*90) / t
= 1/2 *55 + 1/2 * 90 = 72.5 km/hr av
b) time at 55 = 1/2d /55 time at 90 = 1/2 d 90
rate = d / t = d /( 1/2 d 55 + 1/2 d 90) = 1 / ( 1/110 + 1/180) = 68.3 avg
c) and d) are the same question?
total d /total time = avg 2d /( d / 72.5 + d/ 68.3) = 70.3 km/hr
Question 8 of 10
Based on the diagram, which statement explains how energy is conserved
during this chemical reaction?
A
Potential energy
of a system
I
1
I
1
Reaction progress
B
C
OA. The potential energy lost by the reaction system (C) is gained by
the surroundings.
B. The potential energy changes indicated by A and B involve energy
lost by the surroundings.
OC. The potential energy gained by the reaction system (A) is lost from
the surroundings.
OD. The potential energy lost during the formation of products (B) is
lost by the surroundings.
Jy
SUBMIT
The statement that explains how energy is conserved during this chemical reaction is " The potential energy lost by the reaction system (C) is gained by the surroundings".
option A is the correct answer.
What is law of conservation of energy?
The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
Based on the law of conservation of energy, the potential energy of a system can be converted into kinetic energy or heat energy gained by the surrounding.
ΔP.E = ΔH
Pf - Pi = C
where;
Pf is the final potential energyPi is the initial potential energyC is the energy gain by the surroundingLearn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
The radioactive hydrogen isotope 3h is called tritium. it decays by beta-minus decay with a half-life of 12.3 years. What is the daughter nucleus of tritium?
The daughter nucleus of tritium is a helium nucleus with two protons and two neutrons.
What is tritium?It is an isotope of hydrogen. During decay, Tritium nucleus emits an electron and an antineutrino, and changes it from a Tritium with one proton and two neutrons, to a Helium nucleus with two protons and one neutron.
What is helium?Helium is an inert gas.
What is nucleus?Nucleus is positively charged mass at the centre of the atom consisting of positively charged protons and neutral neutrons.
To know more about tritium, visit:
https://brainly.com/question/13129839
#SPJ4
