Answer:
Explanation:
I don't know how you want the conversion done. I use dimensional analysis.
Jane
12 miles / hour [1.6 km/1 mile][1000 m/1 km][1 hour / 3600 sec]
12 * [1.6 * 3600 / 1000 m/s] = 69.12 m/s
5.33 m/s This answer is a bit shorter than using 5280 feet.
Using 5280 feet
12 miles / hour [5280 ft/1 mile] [1 m/3.281 feet] * [1 hr/3600 sec]
12 * 5280 / (3.281 * 3600)
12 *. 4470
5.36
Jack
330 feet / minute [ 1 meter / 3.281 feet] [1 minute / 60 seconds]
330 * 1/(3.281 * 60)
330 * 1/(196.86)
1.676 m/s
She's going faster than he is, no matter which method is used to do the calculation
where did they start water conservation in tamil nadu . short answer
Explanation:
The 2019 water crisis in Chennai has made us realize the importance of saving water more than ever. Water, as we all know, is a finite resource without which our planet would be a barren wasteland. Today with our increasing population it would be logical to say that our water consumption has also increased. And with increasing demand and lesser supply, water scarcity arises. Our ancestors who had foreseen the potential dangers of water scarcity had developed methods to conserve water that was suited for the varied terrain of the Tamil-speaking kingdoms.
Traditional Rainwater Conservation methods of Tamil Nadu
Eri
There are no perennial rivers in Tamil Nadu except the Thamirabharani River which flows through Thirunelveli district. And so, several hundred years ago a simple system was devised to utilize the rainwater to the fullest. An Eri or tank system is one of the oldest forms of water conservation systems in India. Many Eris are still in use in Tamil Nadu and play an active role in irrigation. They act as water reservoirs and flood control systems. They prevent soil erosion, recharge groundwater, and prevent wastage of runoff water during heavy rainfall.
Kudimaramathu
Kudimaramathu is one of the old traditional practice of stakeholders participating in the maintenance and management of irrigation systems. During earlier days, citizens of a village used to actively participate in maintaining the water bodies of their village by deepening and widening the lakes and ponds and restoring the water bodies back to their original form. The silt, rich in nutrients, collected in the process would be used by the farmers themselves in their field. A sense of collective ownership ensured the continued survival of the water bodies.
which elements are liquid in the periodic table?
How many nickels are there in $5.25?
Answer:
105
Explanation:
1 nickel = 5 cents
5.25 dollars x 100 cents
= 525 cents
525 cents / 5 cents
= 105 nickels
Two skaters stand on ice. one weights 250 N, and the other weights 500 N. They push against each other and move in opposite directions. Describe the momentum of each skater after they push away from each other.
Answer:
Because law of momentum, makes it equal
Nitrogen oxide emissions combine with water vapor, producing nitric acid
a
Chemical Change
b
Physical Change
Answer:
chemical change
I hope it's helps you
You want to test the effect of soil acidity on plant growth. Which of the
following is an example of a controlled experiment to test this?
A. The plant type, amount of light, and amount of water are kept
constant while soil acidity is varied for plants in a greenhouse.
B. The soil acidity of plants in a garden that get light and water from
their surroundings is increased after the plants grow to a height of
100 cm.
C. The plant type, soil acidity, amount of light, and amount of water
are all varied and studied in a laboratory.
D. Soil acidity and height of plants growing in a 10 m2 yard are
measured twice in July and twice in August.
Answer:
I believe the answer to your question would be A. this is because it is controlled with a good habitat and also has good variants that are needed in a good plants growth.
Explanation:
white vitriol molecular formula
and green vitriol molecular formula??
Answer:
Green vitriol- FeSO4·7H2O
white vitriol- ZnSO₄
What correctly describes the melting of a solid
The particles in the solid LOSE enough energy to OVERCOME the interactions between the particles
The particles in the solid GAIN enough energy to FORM the interactions between the particles
The particles in the solid GAIN enough energy to OVERCOME the interactions between the particles
The particles in the solid LOSE enough energy to raise the temperature of the solid enough to turn it into a
liquid
Answer:
A reaction in which heat is absorbed by reactant molecules and energy of products become more than reactants is known as an endothermic reaction
HELP IM TIMED!!!!!!!!!
Yellowstone National Park has an average of about 4500 bison living in it. The park covers 3472 square miles. What is the population density of bison living in Yellowstone? a. 1.3 bison/mi^2 b. 16 bison/mi^2 c. 77 bison/mi^2 d. 0.77 bison/mi^2
Answer:
A. 1.3 bison/mi^2
Explanation:
4500 bison divided by 3472 sq miles is 1.3 bison per mile squared.
electrolysis of aqueous copper(2) sulfate half ionic equation
Answer:
Copper is less reactive than hydrogen, so copper (Cu) is produced at the negative electrode. The half equation is: Cu2+ + 2e- → Cu
The hydroxide ion is more reactive than the sulphate ion, therefore this forms water (H2O) and oxygen at the positive electrode.
Element Z has 2 natural isotopes. One isotope has a mass of 15.0 amu and a relative abundance of 30%. The other isotope has a mass of 16.0 amu. What is the second isotope's relative abundance?
Answer:
70%
Explanation:
Just substract 100 % - 30%
Help Please I need to finish TODAY
Answer:
A. > digestive and circulation
B. > digestive and excertory
C. > nervous and muscluar
D.> digestive and circulation
hope this helps !! please make brainlest!
can any one tell me same for ALCL3 I need it urgently plzzz
Lets Form bonds
Al=2,8,3
Lets Write actual configuration or modern
[tex]\\ \sf\longmapsto 1s^22s^22p^63s^3[/tex]
It has valency +3Cl:-2,8,7Let's write configuration
[tex]\\ \sf\longmapsto 1s^22s^22p^63s^23p^5[/tex]
It has valency -1Now Criss cross valency (Refer to attachment)
We get
[tex]\\ \sf\longmapsto AlCl_3[/tex]
4.250 x 10-6 nm in standard form , please help!!
Answer: 4,250 x 10 - 6
Explanation: ok so we have a decimal number, what you do with that is
[tex]4.250 x 10^{3}[/tex] = 4.250 x 1,000 = 4,250 now you can just move the decimal every time without that equation but its better safe. I'm pretty sure that's how they want it, because its not expanded or word.
descoberto em 1996 por pesquisadores alemães o novo elemento químico de numero 112 poderá ser batizado de copernicium em homenagem ao cientista e astronomo Nicolau Copérnico segundo os cientistas o elemento é aproximadamente é 277 vezes mais pesado que o hidrogênio, o que torna o elemento mais pesado da tabela periódica ocupando a posição relativaa ao 7°periodo do grupo 12. A tabela periódica, uma das realizaações mais notáveis da quimica, foi desenvolivda exclusivamente a partir das propriedades fisícas e químmicas dos elementos e, por isso, o conhecimento da posição ocupada por um elemento químico permite que se façam algumas previsões quanto às suas propriedades.
considerando a localização dos átomos dos elementos químicos x, y e z na tabela periódica é incorreto afirmar que
x = 3° período do grupo 1 (I A)
y = 2° período do Grupo 14 (IV A)
z = 2° período do grupo 16 (VI A)
Answer:
Loading...
Explanation:
what are lower and higher energy levels.
Answer:
If an atom, ion, or molecule is at the lowest possible energy level, it and its electrons are said to be in the ground state. If it is at a higher energy level, it is said to be excited, or any electrons that have higher energy than the ground state are excited
Explanation:
pls mark brainliest
Round each number to four significant figures
a. 84,791
b. 256.75
C. 431,801
d. 0.00078100
Answer:
a.
84,791 » 8479
b.
256.75 » 256.8
c.
431,801 » 4318
d.
0.00078100 » 0.0007810
Explanation:
[tex].[/tex]
Why the volume of a gas is not measured immediately after it is collected?
Answer:
Collecting gas over waterWhen collecting oxygen gas and calculating its partial pressure by displacing water from an inverted bottle, the presence of water vapor in the collecting bottle must be accounted for; this is easily accomplished using Dalton’s Law of Partial Pressures.
Most electrochemical cells are the site of redox reactions. They contain 2 electrodes, the ______ where reduction occurs and the _______
A. cathode, anode
B. None of these
C. anode, galvanode
D. anode, cathode
Answer:
A.cathode,anodeExplanation:
positive and negative
pls make me the brainliestGive reasons. 1. There is interrelation between wildlife and vegetation 2. Various activities of the man have helped for the survival of the wildlife. 3. Establishment of national parks and wildlife conservation area help for the protection of wildlife. 4. Different animals are put under Red List. 5. Giant hornbill is critically endangered species in Nepal. Answer the following questions.
Answer:
Yes
Explanation:
If I have 4.9 moles of gas at a pressure of 2.0 atm and a temperature of 56 Celsius, what is the volume of the cantainer that the gas is
in? (R=0.0821 L*atm/mol*K)
Answer: 132 liters. or 130 liters with 2 sig figs.
Explanation: Use the ideal gas law: PV = nRT
We want V, so rewrite and plug in data:
Temperture must be in Kelvin (add 273.15 to
V = (nRT)/P
V = (4.9 moles)*(0.0821 L*atm/molK)*(328.2K)/(1atm)
V = 132 liters (3 sig figs). 130 liters with 2 sig figs
Which phrase best describes a period on the periodic table?
a. elements that are in the same group
b. elements that have the same number of electrons
c. a column of elements
d. a row of elements
Answer:
d. a row of elements
Explanation:
Elements that are in the same group, have same number of electrons and make up a column in a periodic table.
[tex].[/tex]
The phrase which best describes a period on the periodic table is; a row of elements.
The elements in the periodic table are divided into rows and columns. The rows are called the periods while the columns are called the groups.
This means that a period is best described as a row of elements from the foregoing.
Therefore, the correct answer is option D: a row of elements.
Learn more: https://brainly.com/question/11155928
How many atoms of each elements are in three molecules
Answer:
Molecules of compounds have atoms of two or more different elements. For example, water (H2O) has three atoms, two hydrogen (H) atoms and one oxygen (O) atom.
Explanation:
Chewing food to break it down into smaller particles represents a physical change, but the charging of starch into sugars by enzymes in the digestive system represents a chemical change.Chemical or physical change?
Answer:
Chemical changeExplanation:
The charging of starch into sugars by enzymes in the digestive system shows a chemical change.[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]
English
M.
3.x - 9
2r-7
.X + 2
18
Answer:
it will come answer 21 write
How is energy stored in a Van der Graaf generator?
A. Energy is stored in the nucleus
B. Energy is not stored
C. Energy is stored in the chemical bonds
D. Energy is stored in an electrical field
Answer:
C
Explanation:
A Van de Graaff generator is an electrostatic generator which uses a moving belt to accumulate electric charge on a hollow metal globe on the top of an insulated column, creating very high electric potentials. It produces very high voltage direct current (DC) electricity at low current levels
A compound contains only carbon, hydrogen, and oxygen. Combustion of 8.544 mg of the compound yields 12.81 mg CO2 and 3.50 mg H2O. The molar mass of the compound is 176.1 g/mol. What are the empirical and molecular formulas of the compound
Answer:
The empirical formula is the formula with a minimum whole number ratio of the constituent atoms present in a molecule. While the molecular formula has the actual number of atoms of various elements present in the molecule of the substance.
Empirical formula is C₃H₄O₃
Molecular formula is C₆H₈O₆
This question involves finding the empirical and molecular formulas. Empirical formula is the one where minimum whole number ratio of the constituent atoms present in a molecule is shown whereas molecular formula is the one that shows the number of each type of atom that are present in a molecule.The compound contains only carbon, oxygen and hydrogen and undergoes combustion. Thus;[tex]C_{x}[/tex][tex]H_{y} O_{z}[/tex] + O₂ ⟶ xCO₂ + [tex]\frac{y}{z} H_{2} O[/tex]
The combustion yields 12.81 mg of CO₂.From online sources, molar mass of CO₂ = 44 g/mol
number of moles of CO₂ = 12.81/44 = 0.291m mol
Mass of carbon in it is; C = 12 × 0.291 = 3.492 mg
Similarly the combustion yields 3.50 mg H2O.molar mass of water = 18 g/mol
number of moles of water in it = 3.5/18 = 0.194m mol
Hydrogen has 2 nos in water and so;
number of moles of hydrogen = 2 × 0.194 = 0.388m mol
Mass of hydrogen = 1 × 0.388 = 0.388 mg
Compound is 8.544 mg and so;Oxygen mass = 8.544 - (3.492 + 0.388) = 4.664 mg
Similarly, moles of oxygen that has molar mass of 16 is;
no of moles of oxygen = 4.664/16 = 0.2915m mol
Thus;Ratio of C:H:O is; 0.291:0.388;0.2915
Simplifying this gives us the empirical formula ratio as;
3:4:3
Thus;
Empirical formula is C₃H₄O₃
Molar mass of C₃H₄O₃ = (12 × 3) + (1 × 4) + (16 × 3) = 88 g/molWe are told that the molar mass of the compound is 176.1 g/mol.
Thus;
Molecular formula is; (176.1/88)C₃H₄O₃ = C₆H₈O₆
Read more at; brainly.com/question/14853529
the energy required for the complete removal of 1 mol of electrons from 1 mole of gaseous atoms or ions is called energy. For a neutral element this energy is a measure of how easily the element forms an ion with a charge.
Answer: I believe you may have meant "ionization energy?" Yes, for a neutral element this is a measure of the energy required to remove a valence electron.
Explanation: See above.
By definition, The energy required for the complete removal of 1 mol of electrons from 1 mole of gaseous atoms or ions is called Ionization energy. For a neutral element this energy is a measure of how easily the element forms an ion with a charge.
The electrons are attracted to the nucleus and it is necessary to provide energy to start them.
Ionization energy is the energy required to remove an electron from a gaseous atom, isolated and in a ground state. The electrons in the last shell, which are the weakest attracted to the nucleus, are always lost. In this way the neutral atom becomes a gaseous cation (positively charged ion).
The further away the electron is from the nucleus, the easier it is to remove it, that is, the less energy is needed.
Finally:
The energy required for the complete removal of 1 mol of electrons from 1 mole of gaseous atoms or ions is called Ionization energy. For a neutral element this energy is a measure of how easily the element forms an ion with a charge.
Learn more:
https://brainly.com/question/24409114brainly.com/question/16243729?referrer=searchResults brainly.com/question/11623163?referrer=searchResults brainly.com/question/1602374?referrer=searchResultsDensity and Years: What do you know?Objectives: determine and compare density of pennies to assess composition. Procedure:1. Read the directions and create a data table accordingly.2. Place 15-20 pennies in order of consecutive dates. Find the mass of each penny and record.3. Find the volume of all 5 pennies by water displacement and record in your data table. Record the volume adding 5 more pennies at a time until you have measured them all (15-20).a. Find the average volume of 1 penny.4. Calculate the density of each penny and graph according to the year.5. If the density of copper is 8.96 g/cm3 what would the mass of a pure copper penny be?6. Draw a conclusion.7. How might this relate to a real world example?
Answer:I dunno
Explanation:it is the best thing I ever said in this app
!!DUE TODAY, NEED HELP ASAP!!
A student measured the masses of some aluminum and copper cylinders of different volumes. The data is displayed below:
Aluminum: Copper:
Volume (mL)
Mass (g)
Volume (mL)
Mass (g)
3.7
9.99
1.8
16.02
6
16.2
2.3
20.47
8.5
22.99
3.5
31.15
10.74
29
4.2
37.38
15
40.5
5.8
51.62
On graph paper graph the data above on ONE graph. Use the graph paper so the longer side is your y-axis.
Use up the majority of the graph paper. Do not make a small graph!
Use a ruler/straight edge so you graph is neat.
You will need to plot the points for each substance and create a double line graph. When connecting your points for each substance, continue the lines past the plotted points.
Be sure to include a key to identify the substances.
Make your X-axis volume(mL) and your Y-axis mass(g)
Look at the numbers for both substances when creating your scales. You will most likely have a different scale for mass and volume. What is the lowest number? What is the highest number? What does it make sense to go by?
Calculate the density of each metal.
Aluminum:_________________________ Copper:________________________
What happens to the mass of the copper at the volume increases from 6 to 8mL?
Which sample is more dense? How does the graph show you this?
Answer: The data are not arranged in a useful pattern. I arranged them as best I could and made a graph in Excel for demonstration.
Explanation: The data are plotted with mass on the x axis and volume on the y. Add a key to identify the top line as CU and the bottom as Al.
The density of Cu is 8.9 g/ml and 2.70 for Al.
The mass of copper increases by 17.8 grams going from 6 to 8 ml. (8.9 g/ml)*(2 ml) = 17.8 grams.
Copper is more dense. c The graph shows that for the same volumes, copper has the higher mass.
