jawbone root nerve cementum blood vessel gum crown Fill in the blanks. 1. The front four teeth on each jaw are called 2. Each tooth is attached to the jawbone with the help of 3. A healthy tooth is held firmly in the jawbone by the 4. Teeth can get spoilt if they are not kept 5. Germs in the mouth feed on sugar and make​

Jawbone Root Nerve Cementum Blood Vessel Gum Crown Fill In The Blanks. 1. The Front Four Teeth On Each

Answers

Answer 1

Answer:

shduxhheufufffhduduf


Related Questions

How to distinguish between ethanol and 2 -methyl-2-propanol

Answers

Answer:

There are many reagents.

1. Use acidified potassium permanganate solution

2. Use acidified potassium dichromate solution

3. Fehling solution.

4. Silver/ oxygen at 500°C

5. Copper/ oxygen at 300°C

6. Lucas reagent ( anhydrous zinc and conc. hydrochloric acid)

Explanation:

Observations:

[with acidified potassium permanganate solution]

» Ethanol : The purple solution turns colourless.

» 2-methyl-2-propanol : no observable change.

[with acidified potassium dichromate solution]

» Ethanol : orange solution turns green

» 2-methyl-2-propanol : no observable change.

[Fehling solution]

» Ethanol : a white precipitate is formed

» 2-methyl-2-propanol : no observable change

Consider a hypothetical metal that has a density of 10.6 g/cm3, an atomic weight of 176.8 g/mol, and an atomic radius of 0.130 nm. Compute the atomic packing factor if the unit cell has tetragonal symmetry, values for the a and c lattice parameters are 0.570 and 0.341, respectively.

Answers

Answer:

0.3323

Explanation:

GIven that:

Density of the metal = 10.6 g/cm^3

atomic weight = 176.8 g/mol

atmic radius = 0.130 nm

values of a and c = 0.570 nm and 0.341 nm respectively

For us to determine the atomic packing factor, we need to first determine the volume of all spheres (Vs) and the volume of unit cell (Vc).

However, the number of atoms  in the unit cell (n) can be computed as:

[tex]n = \dfrac{\rho * V_c *N_A}{A} \\ \\ n = \dfrac{(10.6) * (5.7)^2 (3.41)*(10^{-24}) *(6.022*10^{23})}{176.8}[/tex]

n = 4.0

Thus, the number of atoms in the unit cell is 4

The atomic paking factor (APF) is calculated by using the formula:

[tex]\dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *R^3 }{a^2 *c} \\ \\ \\ \dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *(1.30*10^{-8})^3 }{(5.70*10^{-8})^2 *(3.41*10^{-8})}[/tex]

= 0.3323

Sofia orders a spare part for her custom-built bike from Oregon Technologies Inc. The company makes use of a computer-aided design model to produce the spare part at its location closest to Sofia's home. In this case, which of the following technologies is used to produce the spare part?

a. Molding
b. Additive manufacturing
c. Lenticular printing
d. Tampography

Answers

Answer:

b. Additive manufacturing

Explanation:

Additive manufacturing is defined as that manufacturing process where light parts and components are being developed or manufactured in 3D form by adding materials to it.

It is a process of adding materials to produce the final product. It is also known as 3D printing.

In the context, Oregon Technologies Inc. uses computer-aided design model in order to manufacture a spare part required by Sofia for her custom made bike by using a process called additive manufacturing.

Thus the correct option is (b).

What is the relationship between temperature and kinetic energy?

Answers

Answer:

"[Temperature is a measurement of the average kinetic energy of the molecules in an object or a system. Kinetic energy is the energy that an object has because of its motion. The molecules in a substance have a range of kinetic energies because they don't all move at the same speed.]"

Answer:

Temperature is directly proportional to the average translational kinetic energy of molecules in an ideal gas

Explanation:

Problem 7 (Diffusion due to viscosity) If the viscosity of a solution is quadrupled, the rms-average distance of a collection of diffusing molecules from their starting point would be _________ over the same amount of time.

Answers

Answer:

1/2 the distance

Explanation:

If the viscosity of a solution is quadrupled then the distance of collection of diffusing molecules would be half over the same amount of time. The viscosity of the molecules is dependent on density of the liquid. It is independent to the volume of the liquid.

Which option is an isotope with 6 protons and 8 neutrons? (1 point)
O oxygen-6
o carbon-14
o oxygen-14
o carbon-8

Answers

Answer:

Carbon-14

Explanation:

It is because it have 6 protons and 8 neutrons which are added together to form an atomic mass of 14.

The mass number of an isotope is the sum of the number of protons and number of neutrons hence the correct answer is carbon-14.

Isotopes are atoms of the same element that has the same number of protons but different number of neutrons.

The atomic number is the same as the number of protons in the atom. Since there are six protons in the atom, the element must be carbon.

There are eight neutrons meaning that the mass  number is 8 + 6 = 14

Therefore, the isotope is carbon-14.

Learn more: https://brainly.com/question/13214440

What does the third quantum number (m) describe?
A. Which energy level the electron is in
B. What type of orbital the electron is in
C. What direction the electron is spinning
D. The specific orbital within a sublevel

Answers

I think c the best answer

The third quantum number (m) describes the specific orbital within a sublevel. The correct answer is option D.

Quantum numbers are a set of four numbers that describe the properties of an electron in an atom. They specify the energy, position, and orientation of an electron in an atom.

The third quantum number (m) is also called the magnetic quantum number. It describes the orientation of the orbital in space. Each orbital within a sublevel has a different orientation in space, and the magnetic quantum number tells us which orbital we are talking about.

The value of m can range from -l to +l, where l is the second quantum number (the angular momentum quantum number). The value of l determines the number of orbitals in a sublevel, and the value of m determines the specific orbital within that sublevel.

In conclusion, the third quantum number (m) describes the specific orbital within a sublevel. It tells us how the orbital is oriented in space, and it can have values ranging from[tex]\rm -l \ to +l[/tex], where l is the second quantum number.

Option D is the correct answer.

Learn more about quantum number here:

https://brainly.com/question/32116992

#SPJ4

A 0.204 g sample of a CO3 2- antacid is dissolved with 25.0ml of 0.0981 M HCL. The hydrochloric acid that is not neutralized by the antacid is titrated to a bromophenol blue endpoint with 5.83 ml of 0.104 M NaOH. Assuming the active ingredient in the antsacid sample is CaCO3, calculate the mass of CaCO3 in the sample.

Answers

Answer:

0.0922 g

Explanation:

Number of moles of acid present = 25/1000 × 0.0981

= 0.00245 moles

Number of moles of base = 5.83/1000 × 0.104

= 0.000606 moles

Since the reaction of HCl and NaOH is 1:1

Number of moles of HCl that reacted with antacid = 0.00245 moles - 0.000606 moles

= 0.001844 moles

From the reaction;

CaCO3 + 2HCl ----> CaCl2 + H2O + CO2

1 mole of CaCO3 reacts with 2 moles of HCl

x moles of CaCO3 reacts with 0.001844 moles ofHCl

x = 1 × 0.001844/2

= 0.000922 moles

Mass of CaCO3 = 0.000922 moles × 100 g/mol

= 0.0922 g

Three peptides were obtained from a trypsin digestion of two different polypeptides. Indicate the possible sequences from the given data.

a. Val-Gly-Arg
b. Ala-Val-Lys
c. Ala-Gly-Phe

Answers

Answer:

A) Val-Gly-Arg-Ala-Val-Lys-Ala-Gly-Phe

B) Ala-Val-Lys-Val-Gly-Arg-Ala-Gly-Phe

Explanation:

The possible sequences that could be obtained from the available dat provided are :

A) Val-Gly-Arg-Ala-Val-Lys-Ala-Gly-Phe

B) Ala-Val-Lys-Val-Gly-Arg-Ala-Gly-Phe

Trypsin is generally a catalyst  for the breakdown of proteins into smaller peptides ( during the hydrolysis of peptide bonds )  

All of the following are TRUE for activities and activity coefficients, except: A) activity for a chemical species is the product of concentration and activity coefficient. B) the activity coefficient corrects for non-ideal behavior due to ionic strength. C) as ionic strength increases, the value of the activity coefficient increases. D) for ions, the activity coefficient approaches unity as the ionic strength approaches 0. E) the activity coefficient for neutral molecules is approximately unity.

Answers

Answer:

C) as ionic strength increases, the value of the activity coefficient increases.

Explanation:

The effective concentration of ions available for reactions is known as the activity of the ion.

The activity coefficient important in chemistry because it accounts for the deviation of a solution from ideal behaviour.

The activity of a chemical species is defines as the product of concentration and activity coefficient.

Following the Debye–Hückel limiting law; log γ = −0.509z2I1/2. The ionic strength of a solution tends to increase as the activity coefficient (γ) of the ion decreases.

A given solution has 42.5 g NaNO3 in 1500 mL of water. What is the molarity of this solution? Show your work, rounding the atomic mass of each element to the nearest tenth and your final answer to the nearest hundredth

Answers

Explanation:

here's the answer to your question

ur mom? lol jk i don't know this one

The surface of silver metal, Ag(s), became tarnished when it was exposed to oxygen, producing Ag2O. In Ag2O, the oxidation state of silver is 1. According to this information, silver metal was _____. Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices reduced

Answers

Answer: The silver metal was OXIDIZED.

Explanation:

OXIDATION is defined as loss of electrons and increase in oxidation number of an atom.

Oxidation number is the charge on an ion in an ionic compound or the charge that an atom in a covalent compound would have it it were ionic. There are basic rules governing oxidation number, they include:

--> the oxidation number of elements in their free states is ZERO. Example O2, Cl2,Na, Al, Ag.

-->The oxidation number for an ion is the same as the size and sign of the charge on the ion. For example the oxidation number of Zn2+ is +2.

--> the sum of all the oxidation numbers of the elements in a compound is zero.

--> oxidation numbers are always written with either a positive or a negative sign.

On the other hand, reduction is the opposite of oxidation. As oxidation is taking place, reduction is also taking place. Reduction involves:

--> Gain of electron and

--> decrease in oxidation number

From the question, the silver metal had ZERO as it's oxidation number because it's in free state. After being exposed to oxygen to form silver oxide, the oxidation number became +1.

Since there is an increase in the oxidation number, the silver metal was OXIDIZED

Write chemical equations for the acid-base reactions that occur when:

a. Solutions of HC₂H₃O₂ (acetic acid) and KOH are mixed.
b. Solutions of HCN (hydrocyanic acid) and Na₂CO₃ are mixed.

Answers

Acetic acid is basically known as CH_3COOH.

Chemical Equation:-

[tex]\boxed{\sf {CH_3COOH\atop Acetic\:acid}+{KOH\atop Potassium\:Hydroxide}\longrightarrow {CH_3COOK\atop Potassium\: Acetate}+{H_2O\atop Water}}[/tex]

This kinda reaction is called Neutralization Reaction.

Solution:-2

[tex]\boxed{\sf {HCN\atop Hydrogen\:Cyanate}+{Na_2CO_3\atop Sodium\:Carbonate}\longrightarrow {NaCN\atop Sodium\:Cyanate}+{H_2O\atop water}+{CO_2\atop Carbon\:dioxide}}[/tex]

Hydro cyanic acid is also called HydrogenCyanate.

A 25.00 gram sample of an unknown metal initially at 99.0 degrees Celcius is added to 50.00 grams of water initially at 10.55 degrees Celcius. The final temperature of the system is 20.15 degrees Celcius. Calculate the specific heat of the metal. (The specific heat of water is 4.184 J/g*C).

Answers

Answer:

1.0188 J/g*C

Explanation:

Using the formula; Q = m × c × ∆T

Q(water) = -Q(metal)

m × c × ∆T (water) = -{m × c × ∆T (metal)}

According to this question,

mass of metal = 25g

initial temp of metal = 99°C

mass of water = 50g

initial temp of water = 10.55°C

final temperature of the system = 20.15°C

c of water = 4.184 J/g*C

50 × 4.184 × (20.15 - 10.55) = 25 × c × (20.15 - 99)

209.2 × 9.6 = 25c × -78.85

2008.32 = -1971.25c

c = 2008.32 ÷ 1971.25

c of metal = 1.0188 J/g*C

why Ethyl amine is more basic than aniline​?

Answers

Answer:

Because a Lone pair of electrons on nitrogen is involved in delocalization.

Hope this helps you ( ◕ᴗ◕✿)

If it doesn't i'm sorry(◞ ‸ ◟)

Explanation:

In ethylamine ethyl is electron donating group. So more electrons are available aroudn nitrogen for donation. But in aniline phenyl group is electron attracting group.

Butanal, an aldehyde, can be made from 1-bromobutane, but it requires two reactions in sequence. What are the two reagents that can be used to make butanal from 1-bromobutane if reagent A is first reacted with 1-bromobutane and then the product of that reaction, is reacted with reagent B.

Answers

Answer:

See explanation and image attached

Explanation:

My aim is to convert 1-bromobutane to butanal. The first step is to react the 1-bromobutane substrate with water. This reaction occurs by SN2 mechanism to yield 1-butanol. Hence reagent A is water.

1-butanol is now reacted with an oxidizing agent such as acidified K2Cr2O7 (reagent B) to yield butanal. Note that primary alkanols are oxidized to alkanals.

These sequence of reactions are shown in the image attached.

Determine the relative formula mass of dihydrogen monoxide using the periodic table below.

A. 18 g/mol
B. 17 g/mol
C. 16 g/mol
D. 2 g/mol

Answers

The relative atomic mass of dihydrogen monoxide is 18g/mol

Dihydrogen monoxide is a molecule containing two atoms of hydrogen and one atom of oxygen i.e. H2O. It is widely regarded as WATER

To calculate the relative atomic mass of dihydrogen monoxide (H2O), we make use of the atomic mass of each element.

According to the periodic table:

Where; H = 1g/mol and O = 16g/mol

H2O = 1(2) + 16

= 2 + 16

= 18g/mol

Learn more at: https://brainly.com/question/17275626

The critical mass of fissionable material is the largest mass necessary to sustain a nuclear fission chain reaction. single mass value that can sustain a nuclear fission chain reaction. mass at the critical point, which can sustain a nuclear fission chain reaction. smallest mass necessary to sustain a nuclear fission chain reaction.

Answers

Answer:

smallest mass necessary to

Explanation:

The critical mass for a fissionable material is the smallest and the lowest quantity of a particular fissile material required to generate a self-sustaining fission chain reaction under specified conditions. The size's features are determined by a number of variables. Examples include;

The type of fissile material employed, its purity as well as concentration, the shape of the surrounding reaction system e.t.c.

Answer:

Fill in the blanks with the terms that complete the sentences about nuclear power plants.

Without a critical mass of fissionable material, a nuclear reaction cannot be sustained. The turbine is powered by steam.

Explanation:

The answers to both parts are marked in bold. I just answered these questions on Edge and they were both correct. Hope this helps. Please mark my answers as the brainiest. THANK YOU!!!!!!!!!!!!!!!!!!!

The standard redox potentials of isolated components of an electron transport chain in a cyanobacterium are found to be as follows:
Complex A: standard redox potential: -100 mV
Complex B: standard redox potential: -780 mV
Complex C: standard redox potential: +510 mV
Complex D: standard redox potential: +310 mV
Plastocyanin: standard redox potential: +360 mV
Which complex will likely have a binding site with high affinity for reduced plastocyanin?
A. Complex A.
B. Complex B.
C. Complex C.
D. Complex D.

Answers

Answer:

B. Complex B.

Explanation:

Complex B will have binding site with high affinity for reduced plastocyanin due to greater redox potential. The high number of redox potential will will transport electron chain in cyanobacteria.

Redox potential is the measure of the electron gain or loss to the electrode. For reduced plastocyanin complex B will have the highest affinity.

What is electron affinity?

Electron affinity is the energy released when the atom gets attached to the atom or other molecule. The high number of redox potential increases the electron transport in the cell.

The greater the redox potential more will be its tendency to show electron affinity. To bond with reduced species, the oxidized species must have greater redox potential.

Therefore, option B. complex b will have the highest affinity.

Learn more about reduction potential here:

https://brainly.com/question/14437673

How are all compounds similar?
A. They are all made up of ions that are held together by attractions.
B. They are all made up of the same few elements.
C. They are all made up of atoms of two or more different elements.
D. They are all made up of atoms that share electrons.

Answers

Answer:

the answer is C

Explanation:

a molecule can be made up of two atoms of the same kind, as when two oxygen atoms bind together to make an oxygen molecule

I'd really appreciate a brainleast

When naming organic compounds, there are strict rules regarding punctuation.
1. A comma is used to separate two numbers.
2. A hyphen is used to separate a number from a letter.
Rewrite the name of this compound using hyphens and commas as appropriate.

Answers

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

2,3,3-trimethylhexane

Explanation:

IUPAC nomenclature provides a universally acceptable method of naming organic compounds from its structure.

According to this system of nomenclature;

A comma is used to separate two numbers.

A hyphen is used to separate a number from a letter.

Applying these rules, the name of the compound shown in the question should be written as 2,3,3-trimethylhexane.

Preparation the buffer solution: initial pH of buffer solution: ____ Titration of a weak acid with a strong base: initial pH of weak acid: ____ final pH of weak acid: ____ Amount of NaOH added: ____ Titration Curve for Weak Acid with a Strong Base (Paste curve here.)

Answers

Answer:

pH of buffer solution is 7.0

Initial pH of Weak acid is 3.27

Final pH of weak acid is 3.07

Amount of NaOH added is 1ml

Explanation:

Titration is a process in which acid and base are introduced together until a neutral solution is achieved whose pH value is near to buffer solution which is 7.0, the pH value for acid is below 7 while pH value for base is above 7.

A person uses 400.8 kcal of energy to run a race. Convert the energy used for the race to the following energy units:

(provide an answer in 4 significant figures)

Calories

calories

Food Calories

Joules

Kilojoules

Hint: 1kcal=4.184kJ

Answers

Calories, we know that fat burn is calories.

CHEM 100Worksheet 6Summer2021Name:____________________(5pts each, 10 pts total) Complete the following multistep synthesis problems. Show all reagents and intermediates for full credit. You do not need to show the mechanisms.

Answers

Where are the questions?

Give the change in condition to go from a gas to a solid. Group of answer choices cool or increase pressure cool or reduce pressure increase heat or reduce pressure increase heat or increase pressure none of the above

Answers

Answer:

cool or increase pressure

Explanation:

For a gas to form solid. There must be reduced heat and pressure. The deposition of gas into solid occurs through the removal of thermal energy. The air looses thermal energy and changes into solid.

The following Weather Data was collected for Jackson, Wyoming. Use the Jackson Wyoming Averages & Records of Temperature-Precipitation-Snow climate data table to determine the month the weather data was most likely collected. Explain why you chose the month you did.

Answers

Average rainfall is 20.0 inch and temperature ranges from 2.5° to 80.8° in the Jackson, Wyoming.

Rainfall: The average rainfall occurs in Jackson, Wyoming is 20.0 inch, the average amount of snowfall in Jackson, Wyoming is  109.0 inch.

Precipitation occurs about 113.3 days in a year whereas 215 days are sunny at the Jackson, Wyoming.

Temperature: The maximum temperature is 80.8° that occurs in the month of June, July, August and September whereas the minimum temperature is 2.5° that occurs in the month of December and January.

https://brainly.com/question/24326696

10. At 573K, NO2(g) decomposes forming NO and O2. The decomposition reaction is second order in NO2 with a rate constant of 1.1 M-1s-1. If the initial concentration of NO2 is 0.056 M, how long will it take for 75% of the NO2 to decompose

Answers

Answer:

48.67 seconds

Explanation:

From;

1/[A] = kt + 1/[A]o

[A] = concentration at time t

t= time taken

k= rate constant

[A]o = initial concentration

Since [A] =[A]o - 0.75[A]o

[A] = 0.056 M - 0.042 M

[A] = 0.014 M

1/0.014 = (1.1t) + 1/0.056

71.4 - 17.86 = 1.1t

53.54 = 1.1t

t= 53.54/1.1

t= 48.67 seconds

Hence,it takes 48.67 seconds to decompose.

Which of the following is an example of an optional deduction ? " a ) Medicare Ob ) Social Security c ) Retirement plan d ) State tax

Answers

Medicare  

United states program for people who are older than 60

Which of the following pairs lists phase changes that both give off energy?
a) Freezing and condensation
b) Deposition and vaporization
c) Vaporization and melting
d) Condensation and sublimation

Answers

Answer:

a) Freezing and condensation

Explanation:

please mark me as brainliest

The answer is A
Freezing ( liquid to solid)
Condensation ( gas to liquid)

Elimination of the pharmaceutical IV antibiotic gentamicin follows first-order kinetics. If the half-life of gentamicin is 1.5 hours for an adolescent. What fraction of the original reactant concentration will remain after 8 hours if the original concentration was 8.4 x 10-5 M.

Answers

Explanation:

The given data is:

The half-life of gentamicin is 1.5 hrs.

The reaction follows first-order kinetics.

The initial concentration of the reactants is 8.4 x 10-5 M.

The concentration of reactant after 8 hrs can be calculated as shown below:

The formula of the half-life of the first-order reaction is:

[tex]k=\frac{0.693}{t_1_/_2}[/tex]

Where k = rate constant

t1/2=half-life

So, the rate constant k value is:

[tex]k=\frac{0.693}{1.5 hrs}[/tex]

The expression for the rate constant is :

[tex]k=\frac{2.303}{t} log \frac{initial concentration}{concentration after time "t"}[/tex]

Substitute the given values and the k value in this formula to get the concentration of the reactant after time 8 hrs is shown below:

[tex]\frac{0.693}{1.5 hrs} =\frac{2.303}{8 hrs} x log \frac{8.4x10^-^5}{y} \\ log \frac{8.4x10^-^5}{y} =1.604\\\frac{8.4x10^-^5}{y}=10^1^.^6^0^4\\\frac{8.4x10^-^5}{y}=40.18\\y=\frac{8.4x10^-^5}{40.18} \\=>y=2.09x10^-^6[/tex]

Answer: The concentration of reactant remains after 8 hours is 2.09x10^-6M.

Other Questions
Name two forms of energy usually used at homes? THE FOLLOWING ONE IS NOT IN INTERROGATIVE FORM. Rearrange the equation A = xy to solve for x.Ox=yA1Ox=OX=yOx-Ay Consider the following account starting balances and transactions involving these accounts. Use T-accounts to record the starting balances and the offsetting entries for the transactions. The starting balance of Cash is $9,100 The starting balance of Inventory is $4,800 The starting balance of Retained Earnings is $24,700 1. Sell product for $30 in cash with historical cost of $24 2. Sell, deliver, and receive payment of $40 for service 3. Consume good or service and pay expense of $2 What is the final amount in Retained Earnings 2(3a-3)-2(a-2)=3thank you Why were the Big six arrestedAnd why True or false? The FLSA classifies employees as exempt or nonexempt from earning overtime pay for hours worked in excess of 50 hours per week. explain how the tissue of the esophagus and tissue of the trachea can be differentiate If a car company introduces a new model car at a price that most consumers areunwilling to pay which creates excess supply, what will happen to the price of that car? The core belief in this movement promotes an ideal spiritual state that 'transcends' the physical and empirical and is only realized through the individual's intuition, rather than through the doctrines of established religions. It placed individualism at a high level. a. Abolitionist movement.b. Domesticity movement.c. Transcendentalist movement.d. Temperance movement. which two ocean border south america Jose es un estudiante de 15 aos que sufrio una lesion similar a la de Phineas gage debido a la lesioncon cual de las siguientes activifades Jose tendria serias dificultades What is the structure of the following statement? "Something needs to be done about the local playground. Graffiti defaces most of it, and there are broken bottles and trash everywhere.A. DescriptiveB. Compare and contrastC. Problem SolutionD. Cause and effect in h-atom if x is radius of first bohrs orbit de broglie wavelength of an atom in 3rd orbit is a.3x b.6x c.9x/2 d.x/2please I need complete explanation fast Need help asap... thanks! Company A has 800 employees, and it decides to grant each of the employees 50 share options as part of its new rewards plan. The options are exercisable over 5 years and subject to a 3-year service condition. The fair value of each option at the grant date is $16. The company estimates that 80% of its employees will meet the service condition required for receiving the options. Calculate the total share-based payment expense for Company A assuming that 80% of the employees actually meet the service condition.Review Later$853,333$170,667$512,000$341,333 Andy is an angry child whose aggressive behavior has gotten him into trouble. His parents decide to put him in sports to channel some of this anger into a healthier and more productive outlet. According to the psychodynamic theory of personality, his parents are trying to use the defense mechanism of Express the value of the following scientific notation of the normal in general number system a). 2.7 X10 cube What is 12x12 inch Square and 3/4 inch pixels? Theodore recently hired a contractor to do some necessary work. On the final bill, Theodore was charged a total of $715. $315 was listed for parts and the rest for labor. If the hourly rate for labor was $50, how many hours of labor was needed to complete the job?