jawbone root nerve cementum blood vessel gum crown Fill in the blanks. 1. The front four teeth on each jaw are called 2. Each tooth is attached to the jawbone with the help of 3. A healthy tooth is held firmly in the jawbone by the 4. Teeth can get spoilt if they are not kept 5. Germs in the mouth feed on sugar and make​

Answer:

55.44L of the 0.17M NaOH are required

Explanation:

Phosphoric acid, H3PO4, reacts with NaOH as follows:

H3PO4 + 3NaOH → Na3PO4 + 3H2O

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve this question we need to find the moles of H3PO4 in the aliquot. Using the balanced equation we can find the moles of NaOH and its volume with the concentration (0.17M) as follows:

Moles H3PO4:

15.4mL = 0.0154L * (0.204mol/L) = 0.00314 moles H3PO4

Moles NaOH:

0.00314 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.009425moles NaOH

Volume NaOH:

0.009425moles NaOH * (1L/0.17moles NaOH) = 0.05544L 0.17M NaOH =

Answer:

A = 65.46 u

Explanation:

Given that,

The composition of zinc is as follows :

Zn-64 = 48.63%

Zn-66 = 27.90%

Zn-67 = 4.10%

Zn-68 = 18.75%

Zn-70 = .62%

We need to find the  average atomic mass of the given element. It can be solved as follows :

[tex]A=\dfrac{48.63\times 64+27.90\times 66+4.1\times 67+18.75\times 68+0.62\times 70}{100}\\A=65.46\ u[/tex]

So, the average atomic mass of zinc is 65.46 u.

Answer:

Li(s) + H2O(l) -----> LiOH(aq) + H2(g)

Ca(s) + 2H2O(l) ---------------> Ca(OH)2(aq) + H2(g)

Explanation:

Metals react with water to yield the metal hydroxide and hydrogen gas as shown in the answer above.

The reaction equations were balanced, the number of atoms of each element on both side of the reaction equation is exactly the same.

This is the way to write a balanced reaction equation for the species shown in the question.

Answer:

answer is first one 1 will be less then that of hg coloumn

Answer:

When this equation is solved, the two values of the unknown are 0.0643 and -0.082

Explanation:

Given

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex] --- the actual equation

Required

The values of x

We have:

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex]

Cross Multiply

[tex]1.77 * 10^{-2} * (0.298 - x)= x^2[/tex]

Multiply both sides by 100

[tex]1.77 * (0.298 - x)= 100x^2[/tex]

Open bracket

[tex]0.52746 - 1.77x= 100x^2[/tex]

Rewrite as:

[tex]100x^2 + 1.77x - 0.52746 =0[/tex]

Using quadratic formula:

[tex]x = \frac{-b \± \sqrt{b^2 - 4ac}}{2a}[/tex]

Where:

[tex]a = 100; b = 1.77; c = -0.52746[/tex]

So, we have:

[tex]x = \frac{-1.77 \± \sqrt{1.77^2 - 4*100*- 0.52746 }}{2*100}[/tex]

[tex]x = \frac{-1.77 \± \sqrt{214.1169}}{2*100}[/tex]

[tex]x = \frac{-1.77 \± 14.63}{200}[/tex]

Split

[tex]x = \frac{-1.77 + 14.63}{200}\ or\ x = \frac{-1.77 - 14.63}{200}[/tex]

[tex]x = \frac{12.86}{200}\ or\ x = \frac{-16.40}{200}[/tex]

[tex]x = 0.0643\ or\ x = -0.082[/tex]

Answer:

The mass of bromine liquid that participates in  a chemical reaction=12.8 g

Explanation:

We are given that

Total number of moles of bromine liquid participate in chemical reaction=0.0800 moles

We have to find the mass of bromine liquid that participates.

Atomic mass of Br=79.9 g

1  mole of bromine liquid=2 atomic mass of bromine (Br)

1 mole of bromine liquid ([tex]Br_2[/tex]) =[tex]2\times 79.9=159.8 g[/tex]

0.0800 moles of  bromine liquid=[tex]159.8\times 0.0800[/tex] g

0.0800 moles of  bromine liquid=12.784 g

0.0800 moles of  bromine liquid[tex]\approx 12.8[/tex] g

Hence, the mass of bromine liquid that participates in  a chemical reaction=12.8 g

Answer:

joib

Explanation:

Answer:

1) pure water

2) 0.75 m CaCl2

3) 1.0 m NaCl

4) 0.5 m KBr

5) 1.5 m glucose (C6H12O6)

Explanation:

Boiling point elevation is a colligative property. Coligative properties are properties that depend on the amount of solute present in the system. The boiling point of solvents increase due to the presence of solutes.

The boiling point elevation depends on the number of particles the solute forms in solution and the molality of the solute. The more the number of particles formed by the solute and the greater the molality of the solute, the greater the magnitude of boiling point elevation.

The order of decreasing hoping point elevation is;

1) 0.75 m CaCl2

2) 1.0 m NaCl

3) 0.5 m KBr

4) 1.5 m glucose (C6H12O6)

Answer:

b. The anion affects the color of the solution more than the intensity of the color.

Explanation:

An ionic compound is one that is made up of ions held together by electrostatic forces. The ions are made up of positively charged ions known as cations and negatively charged ions known as anions. In compounds with a high ionic attribute, anions produce colorless compounds. But compounds that have less ionic attributes produce deeper colors like black and red. When in solutions, ionic compounds take on color and this is because of the anion that absorbs infrared light energy.

Answer:

liquid junction potentials

when a cell contains a boundary between two electrolytic solutions of different composition or concentration, a liquid junction potential is developed due to the "diffusion of the various components at characteristic rates in the boundary zone."

#carryonlearning

Answer:

Explanation:

The reaction is

H3Po4+3NH3\to→ (NH4)3PO4

Given,7.10g NH3=7.10g/molar mass of NH3

=7.10g/(17.031g/mol)

=0.416mol

From the reaction

3 mol ammonia reacted and produced 1 mole of ammoniam phosphate

So,One mole ammonia reacted and produced 1/ 3 mole ammonium phosphate.

And Also,0.416 mole ammonium reacted and produced (1/3)0.416=0.138 mole ammonium phosphate.

Hence 0.138mole=0.138mole*149.08 g/mole

               =20.573gm ammonium phosphate produced.

Hence 20.573g of ammonium phosphate is produced by the reaction of 7.10 g of ammonia.

Answer:

A. the Law of Multiple Properties

Answer:

A. the law of multiple proportions

Answer: A mass of 0.518 g of phenol must be dissolved in 25.0 g of naphthalene to produce a solution that is 0.22 m in phenol.

Explanation:

Given: Mass of naphthalene = 25.0 g

Molality = 0.22 m

This means that 0.22 moles of solute is present per kg of solvent.

As 25.0 g  of naphthalene is there that will be 25.0 g per 1000 g (1 kg) is equal to 0.025 kg.

Hence, moles of phenol are calculated as follows.

[tex]Molality = \frac{moles}{mass (in kg)}\\0.22 m = \frac{moles}{0.025 kg}\\moles = 0.0055 mol[/tex]

Also, molar mass of phenol is 94.11 g/mol. This means that 1 mole of phenol contains 94.11 g.

Therefore, mass contained by 0.0055 moles of phenol is as follows.

[tex]0.0055 mol \times 94.11 g/mol \\= 0.518 g[/tex]

Thus, we can conclude that a mass of 0.518 g of phenol must be dissolved in 25.0 g of naphthalene to produce a solution that is 0.22 m in phenol.

Answer:

As either mass increases, the gravitational force between them

increases.

Explanation:

According to Newton's law of universal gravitation;

F α m1m2/r^2

That is, the force between two masses in a gravitational field is directly proportional to the product of the two masses and inversely proportional to their distance apart.

Hence, as either of the masses increase, the force of gravitation between the two masses increases. Hence the answer.

Answer:

A

Explanation:

because solid stick together like magnetic and can feel every vibration

Answer:D

Explanation: on the surface of a solid

the answer to the question is B.UV-B

Answer: It is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.

Explanation:

When one element in a compound is replaced by another element in a chemical reaction then it is called a single replacement reaction.

For example, [tex]K + NaCl \rightarrow KCl + Na[/tex]

Here, potassium metal is replacing the sodium metal in the sodium chloride compound.

As metals become cation by losing an electron in a chemical reaction.

Thus, we can conclude that it is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.

Answer: Its A

Explanation:

a single replacement reactions, and the ANIONS in the two ionic compounds are different

Answer:

a. Na+ is pH neutral

b. Ni2+ = weak acid

c. NH4+ = Weak acid

Explanation:

To know the nature of the cation we need to find the nature of its conjugate base.

If the conjugate base of the ion is a strong base, the ion is neutral.

If the conjugate base is a weak base, the ion is a weak acid:

a. Conjugate base Na+ = NaOH

Sodium hydroxide is a strong base:

Na+ is pH neutral

b. Conjugate base Ni²⁺: Ni(OH)2 is a weak base because is not completely soluble in water. That means:

Ni2+ = weak acid

c. Conjugate base NH4+: NH4OH. Weak base:

NH4+ = Weak acid

Answer:

1900grams of boiling water

Explanation:

0,c=19

100,c=19×100

1900grams

Answer:

First, the number of ammonium sulfide molecules should be calculated:

N = NA × n,

where NA - the Avogadro number, n - number of moles.

N (ammonium sulfide) = 6.022 × 1023 × 8.5 mol = 51.187 × 1023.

The moelcular formula of ammonium sulfide is (NH4)2S. It means that each molecule contains 8 hydrogen atoms.

As a result, 8.5 mol of (NH4)2S contain:

51.187 × 1023 × 8 = 41 × 1024 hydrogen atoms.

Answer: 41 × 1024 hydrogen atoms

Answer:

C2H3O2

Explanation:

Empirical formula is defined as the simplest whole-number ratio of atoms present in a molecule. To solve this question we need to convert the percentage of each atom to moles using molar mass. With the moles of each atom we can find the ratio:

Moles C -Molar mass: 12.01g/mol-

40.68g * (1mol/12.01g) = 3.387 moles C

Moles H-Molar mass:1g/mol-:

5.12g * (1mol/1g) = 5.12 moles H

Moles O -Molar mass: 16g/mol-

54.19g * (1mol/16g) = 3.387 moles O

Ratio of atoms (Dividing in moles of C that are the lower number of moles):

C = 3.387 moles C / 3.387moles C = 1

H = 5.12moles H / 3.387moles C = 1.5

O = 3.387moles O / 3.387 moles C = 1

This ratio twice (To have only whole-numbers):

C = 2

H = 3

O = 2

Empirical formula of succinic acid:

Answer:

i believe its A, potassium iodide in water

Explanation:

Answer:

mainly metal oxide use to react with both acid and bases to form salts such as zinc, aluminum etc.

Answer:

See explanation

Explanation:

The chlorination of benzene occurs in the presence of a Lewis acid. A Lewis acid is a compound that can accept a lone pair of electrons.

The first step in the chlorination of benzene is the formation of the ion Cl^+ which attacks the benzene ring.

This ion is formed when the Cl2 molecule undergoes heterolytic fission assisted by FeCl3 to yield FeCl4^- and Cl^+.

The Cl^+ electrophile now attacks the benzene ring to yield chlorobenzene.

Answer:

Certain ketones such as fructose can be oxidized by Benedict's reagent under basic conditions to form what type of compound

Explanation:

Benedict's solution is a mixture of copper sulfate, anhydrous sodium carbonate, and sodium citrate.

In presence of mild reducing agents, Cu(II) ion in Benedict's solution becomes the Cu(I) ion.

Fructose has an alpha-hydroxy ketone group.

It undergoes tautomerism and forms alpha-hydroxy aldehyde which gives a positive test with Benedict's reagent.

During this test, aldehydes will be converted into carboxylic acids.

The reaction of fructose with Benedict's reagent is shown below:

Answer:

The answer is growth rate

Explanation:

it will help you

Answer:

C

Explanation:

Think of 'exo' as exit and 'thermic' as relating to thermal energy/ heat. Thus, an exothermic release thermal energy as the reaction proceeds.

In an exothermic reaction, the total energy of the products is lesser than that of the reactants and ΔH (change in energy) is less than zero.

When heat is absorbed as the reaction proceeds, the chemical reaction is an endothermic reaction.

Answer:

Option B. The reaction will shift to the left in the direction of the reactants.

Explanation:

The equation for the reaction is given below:

CO₂ + 2H₂O <=> CH₄ + O₂

Enthalpy change (ΔH) = +890 KJ

The reaction illustrated by the equation is endothermic reaction since the enthalpy change (ΔH) is positive.

Increasing the temperature of an endothermic reaction will shift the equilibrium position to the right and decrease the temperature will shift the equilibrium position to the left.

Therefore, decreasing the temperature of the system illustrated by the equation above, will shift the reaction to the left in the direction of the reactants.

Thus, option B gives the right answer to the question.